Professional Documents
Culture Documents
CW Concept PDF
CW Concept PDF
in a Box
Chocolate World has created this compact and profitable concept for you. From our 30 years of experience we
have prepared an ideal combination of materials and machinery which allows you to produce artisanal and
high quality chocolates in a semi-automatic way.
We wish you good luck with your study and hopefully we can be at your service very soon.
Filip Buelens
You switch on the vibrating table. You stop the chocolate run for a moment by pushing on the footpedal. You then slide the
mould into the device on the vibrating table in order to fill the mould. You release the pedal and the chocolate starts running.
The depositing plate makes that you dose the chocolate in thin dosings directly in the cavities of the moulds. The vibrating table
avoids that you obtain airbubbles enclosed in the mould. Airbubbles have to be avoided because they are seen at the surface of
the chocolate after demoulding. Once the cavities of the mould are full, you push the pedal again to stop the run of chocolate.
You take the mould out of the device and you now vibrate the mould a little longer on the side of the vibrating table. The time
depends on how detailed the chocolate model in the mould is.
If you make a solid product you can put the mould in the cooling.
If you make a filled product you turn the mould upside down so that the chocolate runs out again out of the mould. You therefore
put the mould into contact with the vibrating table which helps the chocolate to run out. The longer you keep the mould upside
down the thinner the chocolate shell will be. Once you have obtained the wanted thickness of the shell you turn the mould
again and put it into the cooling.
With this machine you fill the chocolate shells with a filling. For the recipies of the fillings we would like to advise our book
BELGIAN CHOCOLATES by Roger Geerts. You can find plenty of high quality recipies to choose from.
You put the filling into the funnel of the Easyfill machine. You put the mould with the chocolate shells under the nozzles and
you dose the filling into the shells. You have a handle to determine how much you dose. You have to leave some space free for
the closing with chocolate. The filling machine fills the mould row by row. After filling you vibrate the mould again shortly so
that the airbubbles can escape again.
After cooling for +/- 10 minutes the mould is ready to be closed (sealed) with chocolate.
After a final cooling the mould is ready to be demoulded. You can twist the mould manually and demould on a table.
The demoulding has to be done by knocking the mould upon the table in an angle so that you dont damage the chocolates.
Your chocolates are now ready.
PRODUCTION CAPACITY
The production capacity of the above machinery in combination with two people working 8 hours a day is approximately
100 to 150 kg depending on the kind of product you would like to make.
SHIPMENT
Chocolate World is experienced in packing and shipping of the described equipment.
We will be happy to send you our quotation.
TRAINING
Chocolate World can help you with the training of your staff. We can train you either in our company or in your factory.
Please ask for our conditions.
PRODUCTION: 9 steps closer to your first chocolates!
1. Melting the chocolate
2. Tempering the chocolate
3. Moulding the chocolate: making the chocolate shell in a mould
4. Cooling
5. Filling the chocolate shell with a filling
6. Cooling
7. Closing the filled chocolate shell with chocolate
8. Cooling
9. Demoulding the moulds
DESCRIPTION OF THE MAterial
CW40 capacity 40 kg
This is an automatic tempering machine which can melt and temper (cool) the chocolate to the right temperature
of approximately 30C (depending on the type of chocolate you want to work with).
Bowl capacity: 40 kg (bigger version of 60 and 80 kg available too)
The users display is very simple and consists of: a thermostat for the melting of the chocolate, a thermostat for
the tempering (cooling) of the chocolate, a switch to activate the mixing arm, a switch to activate the flood of
chocolate and a switch to activate the cooling.
There is also a heated vibrating table included, a dosing program to dose a certain weight of chocolate in a shot,
a foot pedal to dose the chocolate, and also an emergency stop.
The option which is recommended is the dosing head including two depositing plates. This dosing head divides
the main flood of chocolate into the cavities of the moulds.
Important advantages are that you save time because you dont have to scrape the moulds, that you can work
very hygienically because the mould stays clean and finally that you can mould the most detailed shapes
without airbubbles. Most standard moulds have a cavity layout of 3 x 7 or 3 x 8. First you fill all your moulds
which correspond to 3 x 7 layout. After which you can easily change the depositing plate in order to mould the
3 x 8 cavity moulds.
M1276 Wheelie
14 kg wheel moulding machine suggested for tempering and processing of white chocolate or other types of
chocolate that needs to be tempered in smaller quantities.
As you might have seen from our website or catalogue, the standard moulds are available by the piece.
There is no minimum to be ordered for each shape. We remind you that it is interesting to choose a maximum of
moulds with cavities of 3 x 7 or 3 x 8 corresponding to the standard depositing plates of the automatic tempering
machine. We suggest a number of 200 moulds to start with. The best is to choose minimum 10 pieces per shape
as your production will be more efficient.
There exist a large number of standard designs of transfers but this concept offers a set of personalised sheets.
You then can have one personalised chocolate with your brandname or logo in your range of chocolates.
The range of transfer sheets diversify for the combination of colors (up to 4) and effect (standard and metallic).
Hollow figures
For creation of 3D chocolate figurines.
Small material
In the chocolate concept we include a number of small utensils and equipments like mixing bowls, thermometer,
spatulas, spraying gun, etc... They are needed in the production as well.
1m
M1242
Rack for moulds Stainless steel table
730x500x1790 mm 2000x900x700 mm
M1042
Stainless steel table
Hot air
410x420x360 mm
heated cupboard
for M1254 Planetary mixer
1000x750x900m
480x410x760 mm
Scale 1:20
Size: (LxWxH)
Technical specifications
Code Description Power
M1500 CW40 capacity 40 kg 4,5 KW triphase 230V or 380V, 50Hz or 60Hz
M1300E Dosing Head including 2 depositing heads no additional power supply needed
M1276 Moulding machine 230 V mono phase, 50-60Hz
M1600 Easyfill filling machine monophase 230V or 110V
M1040 Electric kettle 9 liter monophase 230V
M1042 Hot air heated cupboard 200 kg 1 KW monophase 220V
M1298 Cooled working table 3 doors monophase 220V, 50Hz
M1253 Kitchen aid 220-240 V 50-60HZ
M1254 Planetary mixer
M1271 Induction cooker 220-240V / 3500W
M1261 Hot air blower 1,6 KW monophase 230v 50 Hz
NOTE: .........................................................................................................................................................................................................
.....................................................................................................................................................................................................................
.....................................................................................................................................................................................................................
.....................................................................................................................................................................................................................
.....................................................................................................................................................................................................................
.....................................................................................................................................................................................................................
.....................................................................................................................................................................................................................
Code Description Nof
pieces
M1500 CW40 automatic tempering machine 40 kg 1
M1300E Dosing head including 2 depositing plates (3x7 & 3x8) 1
M1276 Moulding machine Wheelie 14 kg 1
M1600 Easyfill filling machine 1
M1042 Hot air heated cupboard 200 kg 1
M1013 Insert 21 liter for M1041 11
M1298 Cooled working table (3 doors) with humidity and temperature control 1
M1254 Planetary mixer 1
M1253 Kitchen aid 1
M1040 Electric kettle 9 L 1
M1271 Induction cooker 1
NIW05 Electric scale max 30 kg 1
M1261 Hot air blower 1
1000CW Serie 1000 range of chocolate moulds assorted 200
1000L Magnetic moulds 10
L000 Exclusive transfer sheet 1/2 normal colors
Tooling cost 1
Sheets (min. 420 pcs) 420
HM000 Hollow figures 100 - 150 mm 5
M1242 Trolley 2
M1244 Grill 600x400 mm chrome / 120 moulds S1000 per trolley 40
M1189 Digital laser thermometer 1
M1022A Mixing bowl 2,5 L 5
M1022B Mixing bowl 4,5 L 5
M1022C Mixing bowl 6 L 5
M1180 Chocolate spatula 180 mm 3
M1181 Chocolate spatula 230 mm 3
M1182 Chocolate spatula 250 mm 3
M1183 Spatula 420 mm 2
M1184 Scraper 250 mm 2
S1530 Spatula 300 mm 3
S1540 Spatula 400 mm 3
M1185 Spatula 180 mm 3
M1190 Scraper 150 mm 3
M1192 Dough scraper 110x75 mm (10 pcs) 1
S1614 Whisk 350 mm 1
S1755 Disposable pastry bag 100 pcs per roll, 530x280 mm 3
M1266 Spraying gun (for special visual effects in moulds) 1
COL000 Assortment powders 10
BO001 Recipe Book Roger Geerts Belgian Chocolates 1
DVD Recipe DVD Roger Geerts Belgian Chocolates 1
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
enr o b ing c o nc e pt
HOW TO MAKE enrobed CHOCOLATES?
To enrobe (cover with chocolate) you can use different kind of products:
butter cream
marzipan
solid ganache
cookies
To process butter cream, well start by making the bottom. This can be done using a chocolate mould, or using chocolate
stamps. Once the bottom is ready, we can pipe the buttercream using a piping bag.
For solid ganache we work with frames of different heights. We pour the ganache into the frame and once this has become
solid, we can easily cut it using the guitar cutter.
Once all the preparation work is done, we can start enrobing. For this process we introduce our enrobing line, with our without
using a cooling tunnel according to your needs.
The product is placed on the transport grill and goes through the chocolate curtain or through a chocolate bath if we only want
to cover the bottom.
Then the excess of chocolate is removed by the vibrating station and air blower.
After doing all this, the product is ready to be finished with a decoration of your preference: nuts, edible gold (M1195), a chocolate
coffee bean (CW1281 or CW1312).
A view from above
1m
M050
Guitar cutter
Stainless steel table
1000x900x700 mm M1298
Cooled working table
CW40 + M1300A 3 doors
580x761x1555 mm 2240x800x900 mm
M1242
Rack for moulds Stainless steel table
730x500x1790 mm 2000x900x700 mm
M1042
Stainless steel table
Hot air
410x420x360 mm
heated cupboard
for M1254 Planetary mixer
1000x750x900m
480x410x760 mm
Scale 1:20
Size: (LxWxH)
Technical specifications
Code Description Power
M1300A Enrobing line monophase 230V or 380V, 50Hz or 60Hz
DESCRIPTION OF THE MAterial
M1300A
Enrober with double chocolate curtain, vibrating station, adjustable blowing unit, detailer, conveyor belt covered
with paper (width 200 mm).
The enrober automates the traditional, time-consuming coating of confectionery and fillings, increasing
productivity and efficiency.
The thickness of the chocolate can be adjusted by the vibrating system (adjustable in intensity) and by the
blowing unit (adjustable in height and intensity). At the end of the line, the product is placed on a conveyor belt
covered with food-grade paper. The conveyor belt speed can be set by means of a regulator, adjusting the speed
to the specific product and the number of employees.
M1300AB
This accessory enables you to enrobe the bottom of the product.
M1300AP
This accessory enables you to enrobe part of the product.
M1050
Guitar Cutter base incl 4 frames
M1070
Caramel rulers
M1080
Set plastic frames 8 pieces
M1148a - M1150
Chocolate stencils round
M1233
Caramel cutter
M1136 - M11473
Assortment cutters
M1563
Kit dipping forks
M1234
Marzipan roller
Code Description Nof
pieces
M1300A Enrobing line 1
M1300AB Bottom enrobing 1
M1300AP Partial enrobing 1
M1050 Guitar Cutter base incl 4 frames 1
M1070 Caramel ruler 20 x 3 x 500mm 2
M1071 Caramel ruler 20 x 5 x 500mm 2
M1072 Caramel ruler 20 x 8 x 500mm 2
M1073 Caramel ruler 20 x 10 x 500mm 2
M1074 Caramel ruler 20 x 12 x 500mm 2
M1075 Caramel ruler 20 x 15 x 500mm 2
M1076 Caramel ruler 30 x 20 x 500mm 2
M1080 Set plastic frames 8 pieces 2
M1081 Stainless steel frame 375 x 375 x 10 mm 5
M1082 Stainless steel frame 375 x 375 x 15 mm 5
M1083 Stainless steel frame 375 x 375 x 20 mm 5
M1148 Chocolate stencil round diameter 25 mm 1
M1148a Chocolate stencil round diameter 20 mm 1
M1149 Chocolate stencil round diameter 30 mm 1
M1150 Chocolate stencil round diameter 40 mm 1
M1152 Chocolate stencil oval 1
M1233 Caramel cutter 1
M1136-M11473 Assortment cutters 12
M1563 Kit dipping forks 1
M1234 Marzipan roller 1
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
......................................................................................................................................................................................................................
tr u f fle c o nc e pt
HOW TO MAKE truffles?
If you want to make truffles, you can do this in two ways:
piping the filling
fill truffle cases (CW2022 & CW2329 & CW5018)
With CW2022 & CW2329 youll work with our traditional double moulds. CW5018 is a double magnetic mould, which is our
new truffle version.
To fill these moulds equally, well use M1600G which is the truffle option of the Easyfill.
Afterwards, we will enrobe the filling or cases on the truffle grill which is especially made so the product ends in the truffle mill
(M1300C). In the mill we spread the chocolate flakes which we have made with the chocolate slicer (M1049).
M1300B
Truffle grill
M1300C
Truffle mill
M1600G
Truffle option Easyfill
M1049
Chocolate slicer 5 kg
CW5018
Truffle mould
M1292
Chocolate panning machine 16 L
COL4020
Shellac polish 1 L
COL4021
Arabic gum polish 250 ml
This automatic moulding line is equipped with a mould loader able to stack up to 16 moulds and automatically pushes the
moulds along the line where the moulds are being overflowed with chocolate, scraped from every side, pass a vibrating station
to remove airbubbles from the moulds and eventually can be take off the line for production of full products (tablets, napolitains,
caraques) or can be turned from production of chocolate shells.
M1800S1
Automatic moulding line
1000CW
1000 Serie moulds
30 YEARS
MOULDS EDITION 14
we design
your chocolate
Antwerpen Belgium
Tel: +32 (0)3 216 44 27 Tel: +32 (0)3 237 12 11 Fax: +32 (0)3 216 98 33
[email protected] chocolateworld.be