Professional Documents
Culture Documents
ASA Series
ASA Series
SINGLE INLET
CENTRIFUGAL FAN
with Airfoil Wheels
ASA Series
SINGLE INLET CENTRIFUGAL FAN with Airfoil Wheels
ASA Series
Single Inlet Centrifugal Fans Airfoil wheels
The ASA series is SISW centrifugal fans with high efficiency non-overloading airfoil impellers.
The fans are suitable for supply or exhaust applications in commercial and industrial buildings.
Sizes of this series are in accordance with AMCA standard 99-0098-76 R20.
Type C
This type has a frame fitted on both sides of the fan which gives better strength and rigidity.
It allows mounting in four different orientations.
Fan Size : 315 to 630
Volume : 1500 to 20000 m3/h
Total Pressure : up to 1800 Pa
Type T
This type has a welded frame giving increased stiffness and rigidity required for higher
operating performance.
Fan Size : 315 to 1400
Volume : 1500 to 100000 m3/h
Total Pressure : up to 3000 Pa
Type X/Z
This structure is similar to Type T but utilizes enhanced bearings to support higher dynamic
load necessary for the increased performance.
Fan Size : 315 to 1400
Volume : 1500 to 100000 m3/h
Total Pressure: up to 5000 Pa
Type Z is non-standard, for more information, please consult your nearest Kruger office for
detail.
Type U
This type is manufactured with a special frame with two bearings fixed externally to the
airflow eliminating any obstruction to the inlet and allow operation with air temperature up
to max. of 180C
Fan Size : 315 to 1400
Volume : 1500 to 100000 m3/h
Total Pressure : up to 5000 Pa
2
ASA Series
TECHNICAL SPECIFICATION
Wheel
The wheel of ASA is made of cold rolled sheet steel airfoil profile blades with
polyester powder coating finish.
Housing
For all sizes except 1250 and above, the housing is manufactured in galvanized
sheet steel with the housing fixed to the side plates in "pittsburg lock" form
system.
Housing for 1250 and 1400 are manufactured in mild steel finished with
polyester powder coating.
Fully welded steel plate housings with painted finish are available for all sizes
upon request.
Frame
The frame is manufactured with galvanized angular bars for type "C". For type
"T", "X" and "U", they are manufactured with sections of steel and finished
with polyester powder coating.
Shaft
Shafts are manufactured from C45 carbon steel using an automatic process for
positioning and cutting of the keyways. All dimensional tolerances of the shaft
are fully checked to ensure a precision fit and then coated with an anti-
corrosion varnish after assembly.
Bearings
Bearings used are either deep groove ball bearing type with an adapter sleeve,
or spherical roller bearings type sealed at both sides for different duty
application classified as below:
Mounted in a
Mounted on cast iron supports with grease point
rubber housing
C T X U
Fan Type
eg. Model: XX UX
TX Extra Heavy Duty Extra Heavy Duty Extra Heavy Duty
ASA 450 C M
The bearings are lubricated for life and maintenance-free except for TX, XX, UX
extra heavy duty bearings. If re-lubrication is necessary, it is recommended to use
a lithium base grease suitable for all temperatures within the operational limits.
3
ASA Series
Balancing Quality
All wheels are statically and dynamically balanced to ISO1940 and AMCA 204
G2.5 standards.
All fans after assembly are trim-balanced to ISO1940 and AMCA 204 - G2.5
standard.
ACCESSORIES
Casing Drain
This option is available when using fans exposed to the atmosphere or
operating in high humidity conditions.
P3
Outlet Flanges
Outlet flanges are available upon request.
P4
Inlet Flanges
This option is set against the fan to facilitate installation. It is available
in 2 types-L flange or U flange.
P5 Inspection Doors
The inspection door can be supplied upon request. It can be supplied in
one of the three positions (P3, P4 & P5).
Guards
Inlet guard, discharge guards and non-drive end shaft guards are
available on request.
Motor Position
The position of the motor for belt drive
centrifugal fan is in accordance with AMCA
standard 99-2407-66.
100
80
60
Motor Selection
Correction Factor, % motor power output
40
The power curve shown on each performance
curve represents the absorbed power at the
30
20
shaft of the fan measured in kW.
15
2
1.5
1
0.45
0.75
15
22.5
30
45
60
75
150
225
300
450
0.2
0.3
0.6
1.5
2.2
4.5
7.5
3
Dynamic Pressure
The dynamic pressure and outlet air velocity shown on each curve are both calculated on the full air discharge area, i.e.
ducted outlet conditions.
With free outlet conditions the velocity pressure is higher. To determine this new value, multiply the velocity pressure of
the ducted outlet obtained from the fan curve by the following correction factor K.
K = 1.67
Fan performances calculated with this correction factors are not licensed by AMCA.
Performance
The performance data shown on each diagram has been tested and measured in accordance to AMCA Standard 210
Fig 12 installation type B (free inlet and ducted outlet condition).
Rating are referred to the standard air density with the total pressure as a function of the air volume, using logarithmic scales.
It is essential that, the same installation type and test standards are used at all times, when comparing fan performances.
Noise
The noise level shown on each diagram refer to the sound power "A-weighted" and the data on the inlet side has been tested and
measured in accordance with AMCA Standard 300 diag. 2 - configuration "B". The noise levels of the fans are determined as follows :
Octave band spectrum: Lw = Lw(A) + Lw rel. dB [refer to Kruger for more details]
a) free field
Lp(A) = Lw(A) - (20log10d) -11
b) room conditions
Lp(A) = Lw(A) - (20log10d) -7
5
Example of Selection
76
1600
Dynamic Pressure Pd = 59 Pa
88
Absorbed Power W = 4.7 kW
Total Efficiency = 76 %
8000
10
59
6
ASA 315
Op Limit Cl. I Cl. II Cl. III
Type CU TU XU
M.kW 2 5 10
M.RPM 3350 4300 5400
Pt [Pa] J
= 1.22 kg/m3
K>@ 38 48 59 67 62 46 27
6000
kW
5000 6 8
5
4000 4
3
3000
2 N [rpm]
1.6
2000
1.2
1
0.8
0.6
1000 0.5 5400
0.4 5000
105
4600
0.3
4300
100 4000
500
3600
400 95 3350
300 3000
75 90 2800
2600
200 2400
85
2200
2000
80
Lw (A) [dB(A)]
1800
100
.1 .2 .3 .4 .5 .6 .8 1 2 3 4 5 6 8 10 Q [m3/s]
Q [m3/h]
500 1000 2000 3000 5000 10000 20000 30000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
1 5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
- The AMCA Certified Ratings Seal applies to air performance rating only.
7
ASA 355
Op Limit Cl. I Cl. II Cl. III
Type CU TU XU
M.kW 3 6 12
M.RPM 2800 3600 4550
Pt [Pa] J
= 1.22 kg/m3
K>@ 42 55 67 73 67 51 33
6000
kW
5000 8
6 10
4000 5
4
3000
3
N [rpm]
2
2000
1.6
1.2
1
0.8
4550
1000 110
0.6
4200
0.5
105 3900
0.4
3600
0.3
100 3300
500
3000
400 2800
2600
75 95
300 2400
2200
90
200 2000
85
1800
80
1600
Lw (A) [dB(A)]
100
.2 .3 .4 .5 .6 .8 1 2 3 4 5 6 8 10 Q [m3/s]
Q [m3/h]
500 1000 2000 3000 5000 10000 20000 30000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
1 5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
- The AMCA Certified Ratings Seal applies to air performance rating only.
8
ASA 400
Op Limit Cl. I Cl. II Cl. III
Type CU TU XU
M.kW 3 7 14
M.RPM 2500 3250 4100
Pt [Pa] J
= 1.22 kg/m3
K>@ 46 59 69 75 68 53 32
6000
kW
5000 8 10
6
4000
5
4
3000
3
N [rpm]
2000 2
1.6
1.2
1
0.8
1000 4100
0.6
3800
0.5
105 3500
0.4
3250
0.3
100 3000
500
2800
400
2500
95
75
300 2200
90 2000
200 1800
85
1600
100
.2 .3 .4 .5 .6 .8 1 2 3 4 5 6 8 10 Q [m3/s]
Q [m3/h]
1000 2000 3000 5000 10000 20000 30000 50000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
1 5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
- The AMCA Certified Ratings Seal applies to air performance rating only.
9
ASA 450
Op Limit Cl. I Cl. II Cl. III
Type CU TU XU
M.kW 4 9 17
M.RPM 2200 2850 3600
Pt [Pa] J
= 1.22 kg/m3
K>@ 50 60 70 76 70 54 36
6000
kW
5000 10 12
8 16
4000
6
5
3000
4
N [rpm]
3
2000
2
1.6
1.2
1 3600
1000
0.8
3200
0.6
0.5 2850
1600
200 90
1400
85
Lw (A) [dB(A)] 1200
100
.3 .4 .5 .6 .8 1 2 3 4 5 6 8 10 Q [m3/s]
Q [m3/h]
1000 2000 3000 5000 10000 20000 30000 50000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
1 5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
- The AMCA Certified Ratings Seal applies to air performance rating only.
10
ASA 500
Op Limit Cl. I Cl. II Cl. III
Type CU TU XU
M.kW 5 11 20
M.RPM 1950 2550 3200
Pt [Pa] J
= 1.22 kg/m3
K>@ 51 62 70 76 69 53 34
6000
kW
5000
12 16
18
10
4000
8
3000 6
5
N [rpm]
4
2000
3
2
1.6
0.6 2550
0.5 2400
100
500 2200
400 95 1950
300 75 1750
90
1600
200 1400
85
1300
1200
80
Lw (A) [dB(A)] 1100
100
.3 .4 .5 .6 .8 1 2 3 4 5 6 8 10 20 Q [m3/s]
Q [m3/h]
2000 3000 5000 10000 20000 30000 50000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
- The AMCA Certified Ratings Seal applies to air performance rating only.
11
ASA 560
Op Limit Cl. I Cl. II Cl. III
Type CU TU XU
M.kW 6 13 26
M.RPM 1700 2250 2800
Pt [Pa] J
= 1.22 kg/m3
K>@ 49 62 71 79 73 56 37
6000
kW
5000
12 16 20
4000 22
10
8
3000
6 N [rpm]
5
2000 4
2
1.6 2800
1000
1.2
105 2500
1
0.8 2250
100 2100
0.6
500 0.5 1900
400 95 1700
70
300 1500
90
1400
1300
200 1200
75 85
1100
80 1000
Lw (A) [dB(A)]
900
100
.4 .5 .6 .8 1 2 3 4 5 6 8 10 20 Q [m3/s]
Q [m3/h]
2000 3000 5000 10000 20000 30000 50000 100000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
1 5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
- The AMCA Certified Ratings Seal applies to air performance rating only.
12
ASA 630
Op Limit Cl. I Cl. II Cl. III
Type CU TU XU
M.kW 8 16 32
M.RPM 1550 2000 2500
Pt [Pa] J
= 1.22 kg/m3
K>@ 49 63 72 77 71 55 37
6000
kW
5000
20
4000 16
12
3000
10
8 N [rpm]
2000 6
5
4
1000 2500
2
1.6
2200
105
1.2
2000
1
1850
0.8 100
500
1700
400 1550
95
1400
300
1300
90 1200
75
200 1100
85 1000
900
Lw (A) [dB(A)]
80
800
100
.5 .6 .8 1 2 3 4 5 6 8 10 20 30 Q [m3/s]
Q [m3/h]
2000 3000 5000 10000 20000 30000 50000 100000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
- The AMCA Certified Ratings Seal applies to air performance rating only.
13
ASA 710
Op Limit Cl. I Cl. II Cl. III
Type TU XU ZU
M.kW 10 20 40
M.RPM 1350 1750 2250
Pt [Pa] J
= 1.22 kg/m3
K>@ 52 64 72 79 71 55 35
6000
kW
5000
30
20
4000
16
3000 12
10
N [rpm]
8
2000 6
5
4
1000 2250
2
1.6 2000
1.2 105
1750
1
500 1600
100
1500
400
75 1350
95
300 1200
1100
80 90
200 1000
85 900
800
Lw (A) [dB(A)]
100
.6 .8 1 2 3 4 5 6 8 10 20 30 40 Q [m3/s]
Q [m3/h]
3000 5000 10000 20000 30000 50000 100000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
- The AMCA Certified Ratings Seal applies to air performance rating only.
14
ASA 800
Op Limit Cl. I Cl. II Cl. III
Type TU XU ZU
M.kW 12 25 50
M.RPM 1200 1550 2000
Pt [Pa] J
= 1.22 kg/m3
K>@ 47 59 70 78 73 58 36
6000
kW
5000
30 40
4000 20
16 50
3000
12
N [rpm]
10
8
2000
6
5
4
3 2000
1000
1850
110
2
1700
1.6
1550
105
1.2
1 1400
500
1300
100
400 1200
1100
300 75 95
1000
90 900
200
800
80
85
700
Lw (A) [dB(A)] 650
100
.6 .8 1 2 3 4 5 6 8 10 20 30 40 50 Q [m3/s]
Q [m3/h]
2000 3000 5000 10000 20000 30000 50000 100000 200000
V [m/s]
1 2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
1 5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
- The AMCA Certified Ratings Seal applies to air performance rating only.
15
ASA 900
Op Limit Cl. I Cl. II Cl. III
Type TU XU ZU
M.kW 15 32 65
M.RPM 1050 1400 1750
Pt [Pa] J
= 1.22 kg/m3
K>@ 51 63 73 79 72 54 35
6000
kW
5000
30 40 50
4000
3000 20
16
N [rpm]
12
2000 10
8
6
5
4
1000 1750
3
1550
105
2
1400
1.6
500 1250
1.2 100
1150
400
1050
75
95
300
900
90
800
200
80 85 700
650
Lw (A) [dB(A)] 600
100
1 2 3 4 5 6 8 10 20 30 40 50 60 Q [m3/s]
Q [m3/h]
5000 10000 20000 30000 50000 100000 200000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
- The AMCA Certified Ratings Seal applies to air performance rating only.
16
ASA 1000
Op Limit Cl. I Cl. II Cl. III
Type TU XU ZU
M.kW 18 40 80
M.RPM 950 1250 1600
Pt [Pa] J
= 1.22 kg/m3
K>@ 48 59 70 78 73 58 36
6000
kW
5000
40 50 60
4000
30
3000 22
18
N [rpm]
2000 12
10
8
6
5 1600
1000 4
110 1400
3
1250
2 105
1.6 1100
500
1.2
100
400 950
850
300 95
75
750
90 700
200
650
600
85
80
550
Lw (A) [dB(A)]
500
100
1 2 3 4 5 6 8 10 20 30 40 50 60 80 Q [m3/s]
Q [m3/h]
3000 5000 10000 20000 30000 50000 100000 200000 300000
V [m/s]
1 2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
1 5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
17
ASA 1120
Op Limit Cl. I Cl. II Cl. III
Type TU XU ZU
M.kW 25 50 100
M.RPM 850 1100 1400
Pt [Pa] J
= 1.22 kg/m3
K>@ 54 66 76 78 75 58 39
6000
kW
5000
50 60 80
4000
40
3000 30
N [rpm]
20
2000 16
12
10
8
1400
6 110
1000
5 1300
4 1200
105
3 1100
500 2 950
100
1.6
400 850
800
95
300
75
700
90 650
200 600
550
85
500
Lw (A) [dB(A)]
80 450
100
2 3 4 5 6 8 10 20 30 40 50 60 80 100 Q [m3/s]
Q [m3/h]
5000 10000 20000 30000 50000 100000 200000 300000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
1 5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
18
ASA 1250
Op Limit Cl. I Cl. II Cl. III
Type TU XU ZU
M.kW 26 55 110
M.RPM 750 1000 1250
Pt [Pa] J
= 1.22 kg/m3
K>@ 52 64 73 79 73 56 38
6000
kW
5000
4000 55 80
45
3000 35
26 N [rpm]
2000 20
16
12
10
8
1000 1250
6
5 1100
4 105
1000
3
900
500 100
75 800
400
750
95
700
300
650
90 600
80
200 550
85 500
450
Lw (A) [dB(A)]
100
2 3 4 5 6 8 10 20 30 40 50 60 80 100 Q [m3/s]
Q [m3/h]
10000 20000 30000 50000 100000 200000 300000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
19
ASA 1400
Op Limit Cl. I Cl. II Cl. III
Type TU XU ZU
M.kW 35 80 150
M.RPM 650 850 1100
Pt [Pa] J
= 1.22 kg/m3
K>@ 52 64 73 79 73 55 36
6000
kW
5000
80 100
4000
60
3000 50
40
N [rpm]
30
2000
20
16
12
10
1000 1100
8 110
1000
6
5 900
105 850
4
800
500
750
100
400 700
650
300 95 600
80
550
90 500
200
450
85
400
Lw (A) [dB(A)]
100
3 4 5 6 8 10 20 30 40 50 60 80 100 Q [m3/s]
Q [m3/h]
10000 20000 30000 50000 100000 200000 300000 500000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
5 10 50 100 500 1000 5000
Performance shown is for Installation type B free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances in the airstream. Power rating kW does not include drive losses.
The Aweighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
20
ASA C
ASA 315-400 C
B L
M N
G
X
R
t1
C
z
D
S
Y
F
A
d-g6
V
w
==
= F = uxs E
J
P H K
Model A B C D E F G H J K L M N P R S V X Y t t1 W Z d UxS
315 578 518 340 404 223 330 236 480 253 283 451 78 279 38 3 460 319 251 432 8 7 40 28 25 13x18
355 654 578 383 452 247 368 260 548 287 327 479 72 303 30 6 508 359 275 480 8 7 40 33 30 13x18
400 736 650 432 506 274 402 290 612 314 354 506 72 330 38 5 562 404 302 534 8 7 40 33 30 13x18
ASA 450-630 C
B L
M N
G
X
R
t
=
t1
F
C
z
D
S
Y
F1
A
d-g6
V
F
w
=
= F F1 F = uxs E
J
P H K
Model A B C D E F F1 G H J K L M N P R S V X Y t t1 W Z d UxS
450 827 726 486 568 308 200 111 322 681 348 388 556 88 364 45 5 624 454 336 596 10 8 50 38 35 13x18
500 918 800 538 638 345 245 120 352 750 385 425 593 88 401 50 5 694 504 373 666 10 8 50 38 35 13x18
560 1030 892 603 714 383 280 125 390 844 433 483 653 100 439 48 7 770 564 411 742 12 8 70 43 40 13x18
630 1157 998 679 800 433 328 110 434 945 483 533 703 100 489 53 6 856 634 461 828 12 8 70 43 40 13x18
21
ASA T
ASA 315-400 T
L
B
M N
G
X
R
t1
z
C
D
S
Y
F
A
d-g6
V2
V1
V
w
=
= F = UxS E
P H J
K
Model A B C D E F G H J K L M N P R S V V1 V2 X Y t t1 W z d UxS
315 578 518 340 404 223 330 236 480 253 283 451 78 279 38 3 460 315 356 395 251 432 8 7 40 28 25 13x18
355 654 578 383 452 247 368 260 548 287 327 481 74 303 30 6 508 355 395 435 275 480 8 7 40 33 30 13x18
400 736 650 432 506 274 402 290 612 314 354 508 74 330 38 5 562 400 438 480 302 534 8 7 40 33 30 13x18
ASA 450-1000 T
L
B
M N
G
X
R
t
=
t1
F
z
C
D
S
Y
F1
A
d-g6
V2
V1
V
w
F
=
= F F1 F = UxS E
P H J
K
Model A B C D E F F1 G H J K L M N P R S V V1 V2 X Y t t1 W z d UxS
450 827 726 486 568 308 200 111 322 681 348 388 564 96 364 45 5 624 450 487 530 336 596 10 8 50 38 35 13x18
500 918 800 538 638 345 245 120 352 750 385 425 601 96 401 50 5 694 500 541 580 373 666 10 8 50 38 35 13x18
560 1030 892 603 714 383 280 125 390 844 433 483 661 108 439 48 7 770 560 605 646 411 742 12 8 70 43 40 13x18
630 1157 998 679 800 433 328 110 434 945 483 533 711 108 489 53 6 856 630 674 716 461 828 12 8 70 43 40 13x18
710 1302 1120 765 898 479 360 150 484 1057 529 579 763 114 535 63 7 954 710 751 796 507 926 14 9 70 48.5 45 17x22
800 1468 1254 862 1006 533 405 171 540 1180 583 633 817 114 589 74 7 1062 800 837 886 561 1034 14 9 70 48.5 45 17x22
900 1648 1408 971 1130 595 455 189 604 1319 645 695 906 141 651 89 7 1186 900 934 986 623 1158 16 10 90 53.5 55 17x22
1000 1810 1540 1066 1266 663 500 200 656 1450 713 763 974 141 719 90 9 1322 1000 1043 1086 691 1294 16 10 90 53.5 55 17x22
22
ASA T
ASA 1120-1400 T
L
B
M N
G
X
R
t1
z
C
=
D
S
Y
A
=
d-g6
V2
V1
V
w
=
F
F = = = F UxS E
P H J
K
Model A B C D E F G H J K L M N P R S V V1 V2 X Y t t1 W z d UxS
1120 2033 1725 1200 1422 744 290 748 1630 804 870 1146 133 800 95 9 1478 1120 1180 1226 772 1450 18 11 90 64 60 17x22
1250 2285 1930 1353 1524 807 300 830 1831 882 957 1232 148 859 99 9 1580 1250 1303 1356 831 1552 18 11 110 69 65 17x22
1400 2568 2170 1515 1794 938 310 963 2057 1013 1088 1381 166 990 113 13 1850 1400 1480 1506 962 1822 20 12 110 74.5 70 17x22
23
ASA X
ASA 315-400 X
L
B
M N
G
X
R
t1
z
C
D
S
Y
F
A
d-g6
V2
V1
V
w
=
= F = UxS E
P H J
K
Model A B C D E F G H J K L M N P R S V V1 V2 X Y t t1 W z d UxS
315 578 518 340 404 223 330 236 480 253 283 457 84 279 38 3 460 315 356 395 251 432 8 7 40 33 30 13x18
355 654 578 383 452 247 368 260 548 287 327 503 96 303 30 6 508 355 395 435 275 480 10 8 50 38 35 13x18
400 736 650 432 506 274 402 290 612 314 354 530 96 330 38 5 562 400 438 480 302 534 10 8 50 38 35 13x18
All Dimensions in mm.
ASA 450-1000 X
L
B
M N
G
X
R
t
=
t1
F
z
C
D
S
Y
F1
A
d-g6
V2
V1
V
w
F
=
= F F1 F = UxS E
P H J
K
Model A B C D E F F1 G H J K L M N P R S V V1 V2 X Y t t1 W z d UxS
450 827 726 486 568 308 200 111 322 681 348 388 586 118 364 45 5 624 450 487 530 336 596 12 8 70 43 40 13x18
500 918 800 538 638 345 245 120 352 750 385 425 623 118 401 50 5 694 500 541 580 373 666 12 8 70 43 40 13x18
560 1030 892 603 714 383 280 125 390 844 433 483 667 114 439 48 7 770 560 605 646 411 742 14 9 70 48.5 45 13x18
630 1157 998 679 800 433 328 110 434 945 483 533 717 114 489 53 6 856 630 674 716 461 828 14 9 70 48.5 45 13x18
710 1302 1120 765 898 479 360 150 484 1057 529 579 787 138 535 63 7 954 710 751 796 507 926 14 9 90 53.5 50 17x22
800 1468 1254 862 1006 533 405 171 540 1180 583 633 841 138 589 74 7 1062 800 837 886 561 1034 14 9 90 53.5 50 17x22
900 1648 1408 971 1130 595 455 189 604 1319 645 695 911 146 651 89 7 1186 900 934 986 623 1158 18 11 90 64 60 17x22
1000 1810 1540 1066 1266 663 500 200 656 1450 713 763 979 146 719 90 9 1322 1000 1043 1086 691 1294 18 11 90 64 60 17x22
24
ASA X
ASA 1120-1400 X
L
B
M N
G
X
R
t1
z
C
=
D
S
Y
A
=
d-g6
V2
V1
V
w
=
F
F = = = F UxS E
P H J
K
Model A B C D E F G H J K L M N P R S V V1 V2 X Y t t1 W z d UxS
1120 2033 1725 1200 1422 744 290 748 1630 804 870 1173 160 800 95 9 1478 1120 1180 1226 772 1450 18 11 110 69 65 17x22
1250 2285 1930 1353 1524 807 300 830 1831 882 957 1250 166 859 99 9 1580 1250 1303 1356 831 1552 20 12 110 74.5 70 17x22
1400 2568 2170 1515 1794 938 310 963 2057 1013 1088 1396 181 990 113 13 1850 1400 1480 1506 962 1822 22 14 110 85 80 17x22
25
ASA UI
ASA 315-400 UI
B N
G X
R
t1
z
C
S
Y
D
d-g6
A
V1
V2
V
w
=
E
= F = UxS
J Q
P H
M
L
Model A B C D E F G H J L M N P Q R S V V1 V2 X Y t t1 w z d UxS
315 578 518 340 404 223 330 236 480 253 705 60 279 38 274 3 460 315 356 395 251 432 8 7 40 28 25 13x18
355 654 578 383 452 247 368 260 548 287 765 60 303 30 300 6 508 355 395 435 275 480 8 7 40 33 30 13x18
400 736 650 432 506 274 402 290 612 314 812 60 330 38 320 5 562 400 438 480 302 534 8 7 40 33 30 13x18
ASA 450-1000 UI
B N
G X
R
t
=
t1
z
C
S
Y
D
d-g6
A
F1
V1
V2
w
F
=
E
= F F1 F = UxS
J Q
P H M
L
Model A B C D E F F1 G H J L M N P Q R S V V1 V2 X Y t t1 w z d UxS
450 827 726 486 568 308 200 111 322 681 348 876 80 364 45 340 5 624 450 487 530 336 596 10 8 50 38 35 13x18
500 918 800 538 638 345 245 120 352 750 385 933 80 401 50 360 5 694 500 541 580 373 666 10 8 50 38 35 13x18
560 1030 892 603 714 383 280 125 390 844 433 1018 90 439 48 378 7 770 560 605 646 411 742 12 8 70 43 40 13x18
630 1157 998 679 800 433 328 110 434 945 483 1090 90 489 53 400 6 856 630 674 716 461 828 12 8 70 43 40 13x18
710 1302 1120 765 898 479 360 150 484 1057 529 1156 90 535 63 420 7 954 710 751 796 507 926 14 9 70 48.5 45 17x22
800 1468 1254 862 1006 533 405 171 540 1180 583 1228 90 589 74 440 7 1062 800 837 886 561 1034 14 9 70 48.5 45 17x22
900 1648 1408 971 1130 595 455 189 604 1319 645 1360 110 651 89 490 7 1186 900 934 986 623 1158 16 10 90 53.5 55 17x22
1000 1810 1540 1066 1266 663 500 200 656 1450 713 1448 110 719 90 510 9 1322 1000 1043 1086 691 1294 16 10 90 53.5 55 17x22
ASA 1120-1400 UI
B N
G X
R
t1
z
C
S
Y
D
d-g6
A
V1
V2
V
w
=
F
E
F = = = F UxS
J Q
P H
M
L
Model A B C D E F G H J L M N P Q R S V V1 V2 X Y t t1 w z d UxS
1120 2033 1725 1200 1422 744 290 748 1630 804 1680 110 800 95 572 9 1478 1120 1180 1226 772 1450 18 11 90 64 60 17x22
1250 2285 1930 1353 1524 807 300 830 1831 882 1844 140 859 99 632 9 1580 1250 1303 1356 831 1552 18 11 110 69 65 17x22
1400 2568 2170 1515 1794 938 310 963 2057 1013 2060 140 990 113 717 13 1850 1400 1480 1506 962 1822 20 12 110 74.5 70 17x22
All Dimensions in mm.
27
ASA UII
B N
G X
R
t1
z
C
S
Y
D
d-g6
A
V1
V2
V
w
=
E
= F = UxS
J Q
P H
M
L
Model A B C D E F G H J L M N P Q R S V V1 V2 X Y t t1 w z d UxS
315 578 518 340 404 223 330 236 480 253 705 60 279 38 274 3 460 315 356 395 251 432 8 7 40 28 25 13x18
355 654 578 383 452 247 368 260 548 287 765 60 303 30 300 6 508 355 395 435 275 480 8 7 40 33 30 13x18
400 736 650 432 506 274 402 290 612 314 812 60 330 38 320 5 562 400 438 480 302 534 8 7 40 33 30 13x18
All Dimensions in mm.
t
=
t1
z
C
S
Y
D
d-g6
A
F1
V1
V2
w
F
=
E
= F F1 F = UxS
J Q
P H
M
L
Model A B C D E F F1 G H J L M N P Q R S V V1 V2 X Y t t1 w z d UxS
450 827 726 486 568 308 200 111 322 681 348 876 70 364 45 340 5 624 450 487 530 336 596 10 8 50 38 35 13x18
500 918 800 538 638 345 245 120 352 750 385 933 70 401 50 360 5 694 500 541 580 373 666 10 8 50 38 35 13x18
560 1030 892 603 714 383 280 125 390 844 433 1018 90 439 48 378 7 770 560 605 646 411 742 12 8 70 43 40 13x18
630 1157 998 679 800 433 328 110 434 945 483 1090 90 489 53 400 6 856 630 674 716 461 828 12 8 70 43 40 13x18
710 1302 1120 765 898 479 360 150 484 1057 529 1176 110 535 63 420 7 954 710 751 796 507 926 14 9 90 53.5 50 17x22
800 1468 1254 862 1006 533 405 171 540 1180 583 1248 110 589 74 440 7 1062 800 837 886 561 1034 14 9 90 53.5 50 17x22
900 1648 1408 971 1130 595 455 189 604 1319 645 1360 110 651 89 490 7 1186 900 934 986 623 1158 18 11 90 64 60 17x22
1000 1810 1540 1066 1266 663 500 200 656 1450 713 1448 110 719 90 510 9 1322 1000 1043 1086 691 1294 18 11 90 64 60 17x22
All Dimensions in mm.
28
ASA UII
t1
z
C
S
Y
D
d-g6
A
V1
V2
V
=
F w
E
F = = = F UxS
J Q
P H
M
L
Model A B C D E F G H J L M N P Q R S V V1 V2 X Y t t1 w z d UxS
1120 2033 1725 1200 1422 744 290 748 1630 804 1710 140 800 95 572 9 1478 1120 1180 1226 772 1450 18 11 110 69 65 17x22
1250 2285 1930 1353 1524 807 300 830 1831 882 1844 140 859 99 632 9 1580 1250 1303 1356 831 1552 20 12 110 74.5 70 17x22
1400 2568 2170 1515 1794 938 310 963 2057 1013 2060 140 990 113 717 13 1850 1400 1480 1506 962 1822 22 14 110 85 80 17x22
All Dimensions in mm.
29
OVERALL DIMENSION ASA C SERIES
C
C C2
C1
H
H
H
H
W L L W L W W L
CCW 90 (Pos W) CCW 270 (Pos Z) CCW 360 (Pos W) CCW 360 (Pos Z)
C
C C1 C2
H
H
H
H
L W W L L W W L
30
OVERALL DIMENSION - ASA T SERIES
C C2
C C1
H
W L L W L W W L
CCW 90 (Pos W) CCW 270 (Pos Z) CCW 360 (Pos W) CCW 360 (Pos Z)
C C
C1 C2
H
H
H
L W W L L W W L
C C2
C C1
H
H
W L L W L W W L
CCW 90 (Pos W) CCW 270 (Pos Z) CCW 360 (Pos W) CCW 360 (Pos Z)
C C
C1 C2
H
H
H
L W W L L W W L
32
OVERALL DIMENSION - ASA X SERIES
C C2
C C1
H
W L L W L W L W
CCW 90 (Pos W) CCW 270 (Pos Z) CCW 360 (Pos W) CCW 360 (Pos Z)
C
C C1 C2
H
H
H
L W W L L W W L
C C C2 C1
H
W L L W L W W L
CCW 90 (Pos W) CCW 270 (Pos Z) CCW 360 (Pos W) CCW 360 (Pos Z)
C C C1 C2
H
H
H
L W W L L W W L
34
OVERALL DIMENSION ASA UI SERIES
C C C2 C1
H
W L L W L W W L
CCW 90 (Pos W) CCW 270 (Pos Z) CCW 360 (Pos W) CCW 360 (Pos Z)
C C C1 C2
H
H
H
L W W L L W W L
35
OVERALL DIMENSION ASA UII SERIES
C C C2
C1
H
W L L W L W W L
CCW 90 (Pos W) CCW 270 (Pos Z) CCW 360 (Pos W) CCW 360 (Pos Z)
C C C1 C2
H
H
H
L W W L L W W L
36
OVERALL DIMENSION ASA UII SERIES
C C C2
C1
H
W L L W L W W L
CCW 90 (Pos W) CCW 270 (Pos Z) CCW 360 (Pos W) CCW 360 (Pos Z)
C C C1 C2
H
H
H
L W W L L W W L
37
38
T kW 5 6 7 9 11 13 16 10 12 15 18 25 25 35
X kW 10 11 14 17 20 26 32 20 25 32 38 50 55 75
UI kW 2 3 3 4 5 6 7 10 12 15 18 25 25 35
UII kW 5 6 7 9 11 13 16 20 25 32 38 50 55 75
Maximum Fan Speed C rpm 3350 2800 2500 2200 1950 1700 1550
T rpm 4300 3600 3250 2850 2550 2250 2000 1350 1200 1050 950 850 750 650
X rpm 5400 4550 4100 3600 3200 2800 2500 1750 1550 1400 1250 1100 1000 850
UI rpm 3350 2800 2500 2200 1950 1700 1550 1350 1200 1050 950 850 750 650
UII rpm 4300 3600 3250 2850 2550 2250 2000 1750 1550 1400 1250 1100 1000 850
UIII rpm 5400 4550 4100 3600 3200 2800 2500 2250 2000 1750 1550 1400 1250 1100
o
Temperature Range / Min. -20oC C Max. C 85 85 85 85 85 85 85
o
T Max. C 100 100 100 100 100 100 100 100 100 100 100 100 100 100
o
X Max. C 100 100 100 100 100 100 100 100 100 100 100 100 100 100
o
UI Max. C 180 180 180 180 180 180 180 180 180 180 180 180 180 180
o
UII Max. C 180 180 180 180 180 180 180 180 180 180 180 180 180 180
UIII Max.oC 180 180 180 180 180 180 180 180 180 180 180 180 180 180
UII kg 33 45 54 68 82 113 142 182 252 315 362 606 837 1153
Centrifugal Fan Ordering Information
Fan Details
Fan type DIDW SISW
Model & size e.g. FSA 560 C Model : ___________________ (If known)
39
NOTES
40
KRUGER GROUP (VENTILATION)
SINGAPORE SINGAPORE
KRUGER VENTILATION INDUSTRIES PTE LTD KRUGER ENGINEERING PTE LTD
No. 17, Tuas Avenue 10 No. 17, Tuas Avenue 10
Singapore 639141 Singapore 639141
Tel. +65 68611577 - Fax +65 68613577 Tel. +65 68631191 - Fax +65 68631151
Email: [email protected] Email: [email protected]
MALAYSIA THAILAND
KRUVENT INDUSTRIES (M) SDN BHD KRUGER VENTILATION IND. (THAILAND) CO. LTD
Lot 8, Jalan Perusahaan 2 Batu Caves 1/19 Moo 2 Rama II Rd, Tasai
Industrial Area, 68100 Batu Caves Selangor Mueng Samuthsakorn 74000, Thailand
Tel. +603 61888293 - Fax +603 61898843 Tel. +66 34-490164-9/375-6 - Fax +66 34-490170/377
Email: [email protected] Email: [email protected]
BEIJING GUANGZHOU
BEIJING KRUGER VENTILATION CO. LTD GUANGZHOU KRUGER M&E INDUSTRIES CO. LTD
No. 1A South Industry Area No. 1270 Maogang Road, Huangpu
Beijing Economical And Technological Guangzhou, P.R. China 510700
Development Area, Beijing China 100176 Tel. +86 20-32387634 Fax +86 20-32387624
Tel. +86 10-67881366 - Fax +86 10-67880566 Email: [email protected]
Email: [email protected]
WUHAN TAIPEI
WUHAN KRUGER VENTILATION CO. LTD KRUGER VENTILATION (TAIWAN) CO. LTD
Xincheng Road 10 , South Dongwu Ave , Dongxihu District, No. 157, Ping-an Rd, Hengfeng Village,
Wuhan ,Hubei, P.R.China 430040 Dayuan Shiang Taoyuan County 337, Taiwan(ROC)
Tel. +86 27- 83248840 - Fax +86 27- 83261886 Tel. +886 3-3859119 - Fax +886 3-3859118
Email: [email protected] Email: [email protected]
PHILIPPINES AUSTRALIA
KRUGER M&E INDUSTRIES CORPORATION KRUGER VENTILATION (AUSTRALIA) PTY LTD
FAPI Compound, E. Rodriguez Ave. 4 Blackfriar Place, Wetherill Park
Tunasan, Muntinlupa City, Philippines 1773 NSW 2164, Australia
Tel. +63 2-8622891-97 - Fax +63 2-8621287 Tel. +61 2-97562008 - Fax +61 2-97560808
Email: [email protected] Email: [email protected]
INDONESIA INDIA
P.T. KRUGER VENTILATION INDONESIA KRUGER VENTILATION INDUSTRIES (INDIA) PVT LTD
JL. Teuku Umar No.20, Kruger Centre, National Highway 3,
Karawaci - Tangerang 15115, Indonesia Atgaon, Shahapur, Thane 421304, Maharashtra, India
Tel. +62 21-5513576 - Fax +62 21-5513502 Tel. +91 98601 98710 - Fax +91 2527 240075
Email: [email protected] Email: [email protected]
KOREA VIETNAM
NEOMATE TECHNOLOGY & CONSULTING CO. LTD KRUGER VENTILATION INDUSTRIES PTE LTD
2-1010, Ace High Tech City B/D, (Vietnam Representative Office)
54-66 Mullae-dong 3-ga Yeongdeungpo-gu, Seoul, Korea 4th floor, HHM Office Building, 157-159 Xuan Hong St,
Tel. +82 02-2679-2052/3 - Fax +82 02-2679-2174 Tan Binh Dist, Hochiminh City, Vietnam
Email: [email protected] Tel. +84-8-6 2968123 - Fax +84-8-6 2968124
Email: [email protected]
The company is always improving and developing its products, therefore the company reserves the right to make changes to the illustrated products.
Certified dimension will be provided upon request.
Edition 3
Printed on June 08
Kruger Ventilation Industries Pte Ltd
No. 17 Tuas Avenue 10 Singapore 639141 - Tel. +65 68611577 - Fax +65 68613577 CNo. - CAT010.E1 March 2007
Website: www. krugerfan.com