Quectel GSM FTP at Commands Manual V1.4
Quectel GSM FTP at Commands Manual V1.4
GSM FTP
AT Commands Manual
GSM_FTP_AT_Commands_Manual_V1.4
GSM FTP AT Commands Manual
Version 1.4
Date 2015-04-08
Status Released
l
General Notes
e
Quectel offers this information as a service to its customers, to support application and
t
engineering efforts that use the products designed by Quectel. The information provided is
c l
based upon requirements specifically provided to Quectel by the customers. Quectel has not
a
undertaken any independent search for additional relevant information, including any
e i
information that may be in the customers possession. Furthermore, system validation of this
t
product designed by Quectel within a larger electronic system remains the responsibility of
u
the customer or the customers system integrator. All specifications supplied herein are
n
subject to change.
Q ide
Copyright
This document contains proprietary technical information which is the property of Quectel
f
Limited. The copying of this document and giving it to others and the using or
communication of the contents thereof, are forbidden without express authority. Offenders are
n
liable to the payment of damages. All rights are reserved in the event of grant of a patent or
the registration of a utility model or design. All specification supplied herein are subject to
o
change without notice at any time.
C
Copyright Quectel Wireless Solutions Co., Ltd. 2015
GSM_FTP_AT_Commands_Manual_V1.4 -1-
GSM FTP AT Commands Manual
Contents
Contents ............................................................................................................................................ 2
0. Revision history ............................................................................................................................ 4
1. Introduction ................................................................................................................................... 5
1.1. Reference............................................................................................................................. 5
1.2. Terms and abbreviations ...................................................................................................... 5
2. AT Commands for FTP Service .................................................................................................... 6
2.1. Overview of AT Commands for FTP Service ..................................................................... 6
2.2. Detailed Description of AT Commands for FTP Service.................................................... 7
l
2.2.1. AT+QFTPOPEN Open an FTP service to the given FTP server ........................... 7
e
2.2.2. AT+QFTPCLOSE Close the FTP service .............................................................. 8
t
2.2.3. AT+QFTPPUT Upload a file to the FTP server ..................................................... 8
l
2.2.4. AT+QFTPGET Download a file from the FTP server ........................................... 9
c
2.2.5. AT+QFTPPATH Set the path in the FTP server to upload or download file ....... 10
e ia
2.2.6. AT+QFTPUSER Set the user name of the account to open FTP service ............. 11
t
2.2.7. AT+QFTPPASS Set the password of the account to open FTP service ............... 12
u
2.2.8. AT+QFTPCFG Set some configurable parameters for the FTP service .............. 12
n
2.2.9. AT+QFTPSTAT Query status of FTP service ...................................................... 14
Q ide
2.2.10. AT+QFTPLEN Query the real size transferred in the latest transfer ................... 15
2.2.11. AT+QFTPRENAME Rename the file or file folder name on the ftp server ........ 15
2.2.12. AT+QFTPSIZE Query the size of appointed file on the ftp server ...................... 16
2.2.13. AT+QFTPDELETE Delete the appointed file on the ftp server .......................... 17
f
2.2.14. AT+QFTPMKDIR Establish a new file folder on the ftp server ......................... 17
n
2.2.15. AT+QFTPRMDIR Remove a file folder on the ftp server................................... 18
2.2.16. AT+QFTPLIST List contents of directory or file information on the ftp server.. 19
o
2.2.17. AT+QFTPNLST List file names in the given directory on the ftp server ............ 20
3. Summary of Error Codes ............................................................................................................ 21
C
4. Examples ..................................................................................................................................... 22
4.1. Open an FTP service ......................................................................................................... 22
4.2. Upload a file to FTP server ............................................................................................... 22
4.2.1. Upload a file through UART ............................................................................... 22
4.2.2. Upload a file in UFS ............................................................................................ 23
4.2.3. Upload a file in RAM .......................................................................................... 23
4.2.4. Upload a specified file in UFS ............................................................................. 24
4.3. Download a file from FTP server ...................................................................................... 25
4.3.1. Download a file through UART........................................................................... 25
4.3.2. Download a file into UFS .................................................................................... 25
4.3.3. Download a file into a specified file in UFS ........................................................ 26
4.3.4. Download a file into RAM .................................................................................. 26
4.4. Operate a file or a file folder on the FTP........................................................................... 27
4.4.1. Operate a file on the FTP server .......................................................................... 27
4.4.2. Operate a file folder on the FTP server ................................................................ 28
GSM_FTP_AT_Commands_Manual_V1.4 -2-
GSM FTP AT Commands Manual
t el
e c ia l
u n t
Q ide
n f
Co
GSM_FTP_AT_Commands_Manual_V1.4 -3-
GSM FTP AT Commands Manual
0. Revision history
l
in UFS or SD or RAM and download a file to
UFS or SD or RAM.
t e
1.2 2012-1-20 Derrick DAI Added the description about the new AT
l
commands which control the operations of file
c
and file folder on FTP.
e a
2012-6-4 Will SHAO Modified AT+QFTPGET for RAM file.
t i
2012-8-22 Jonathan WEN Added AT+QFTPLIST & AT+QFTPNLST.
u
1.3 2012-8-24 Jonathan WEN Added examples of downloading FTP file to
n
RAM and uploading RAM file to FTP.
Q ide
1.4 2015-04-08 Jonathan WEN Added applicable modules
n f
Co
GSM_FTP_AT_Commands_Manual_V1.4 -4-
GSM FTP AT Commands Manual
1. Introduction
Quectel Module provides an internal TCP/IP stack that is driven by AT commands and
enables the host application to easily access the Internet service. It includes TCP service,
UDP service, HTTP service and FTP service, etc. This document is a reference guide to all
the AT commands and responses defined for FTP Service.
l
1.1. Reference
e
Table 1: Reference
c t l
SN Document name Remark
a
[1] M10_ATC.pdf The introduction to AT commands for M10
e i
[2] GSM_TCPIP_AN.pdf To introduce how to use the internal TCP/IP stack
u t
[3] GSM_File_ATC To introduce the AT command for the file system
Q ide n
1.2. Terms and abbreviations
n f
Abbreviation Description
APN Access Point Network
o
CSD Circuit Switched Data
FTP File Transfer Protocol
C
GPRS General Packet Radio Service
HTTP Hypertext Transfer Protocol Overview
TA Terminal Adapter, i.e. the module
TCP Transmission Control Protocol
TE Terminal Equipment, i.e. the device who control the module via UART
UART Universal Asynchronous Receiver/Transmitter
UDP User Datagram Protocol
UFS User File Storage. Please refer to [3]
GSM_FTP_AT_Commands_Manual_V1.4 -5-
GSM FTP AT Commands Manual
Command Description
AT+QFTPOPEN OPEN AN FTP SERVICE TO THE GIVEN FTP SERVER
AT+QFTPCLOSE CLOSE THE FTP SERVICE
AT+QFTPPUT UPLOAD A FILE TO THE FTP SERVER
AT+QFTPGET DOWNLOAD A FILE FROM THE FTP SERVER
l
AT+QFTPPATH SET THE PATH IN THE FTP SERVER TO UPLOAD OR DOWNLOAD
e
FILE
t
AT+QFTPUSER SET THE USER NAME OF THE ACCOUNT TO OPEN FTP SERVICE
l
AT+QFTPPASS SET THE PASSWORD OF THE ACCOUNT TO OPEN FTP SERVICE
c
AT+QFTPCFG SET SOME CONFIGUABLE PARAMETERS FOR THE FTP SERVICE
e ia
AT+QFTPSTAT QUERY STATUS OF FTP SERVICE
t
AT+QFTPLEN QUERY THE REAL SIZE TRANSFERRED IN THE LATEST
u
TRANSFER
n
AT+QFTPRENA RENAME THE FILE OR FILEFOLDER NAME ON THE FTP SERVER
Q ide
ME
AT+QFTPSIZE QUERY THE SIZE OF APPOINTED FILE ON THE FTP SERVER
AT+QFTPDELET DELETE THE APPOINTED FILE ON THE FTP SERVER
f
E
AT+QFTPMKDI ESTABLISH A NEW FILEFOLDER ON THE FTP SERVER
n
R
AT+QFTPRMDIR REMOVE A FILEFOLDER ON THE FTP SERVER
o
AT+QFTPLIST LIST CONTENTS OF DIRECTORY OR FILE INFORMATION ON
THE FTP SERVER
C
AT+ QFTPNLST LIST FILE NAMES IN THE GIVEN DIRECTORY ON THE FTP
SERVER
GSM_FTP_AT_Commands_Manual_V1.4 -6-
GSM FTP AT Commands Manual
l
See Write Command
Read Command Response
e
AT+QFTPOPEN +QFTPOPEN :"<hostName>",(1-65535)
t
?
c l
OK
a
Parameters
e i
See Write Command
u t
Write Command Response
n
AT+QFTPOPEN If format is right, response
="<host OK
Q ide
Name>",<port>
Otherwise response
ERROR
f
Next, if connect successfully, response
+QFTPOPEN:0
o n
Otherwise, response
+QFTPOPEN:<err>
Parameters
C
<hostName> The address of the FTP server. It could be an IP address
or a domain name. The maximum size of the parameter
is 100.
<port> The port of the FTP server. The range of the parameter is
1-65535.
<err> A negative numeric to indicate the type of error, please
refer to the chapter 3.
Reference Note:
It is recommended to execute the commands AT+QFTPUSER and
AT+QFTPPASS to set the user name and password before opening
FTP service.
If FTP state is IDLE or CLOSED (Please refer to 2.2.9), the fields of
host name and port in the response of the read command are empty.
GSM_FTP_AT_Commands_Manual_V1.4 -7-
GSM FTP AT Commands Manual
l
+QFTPCLOSE:0
t e
Otherwise, response
l
+QFTPCLOSE:<err>
c
Parameters
e ia
<err> A negative numeric to indicate the type of error, please
t
refer to the chapter 3.
u
Reference
2.2.3.
Q ide n
AT+QFTPPUT Upload a file to the FTP server
f
Test Command Response
n
AT+QFTPPUT= +QFTPPUT: "FILE NAME",<fileSz>,(1-65535)
?
o
OK
Parameters
C
See Write Command
Write Command Response
AT+QFTPPUT= If format is right, response
"<fileName>",<f OK
ileSz>[,<time>]
Otherwise, response
ERROR
Next, if the UART successfully enter data mode, response
CONNECT
Otherwise, response
+QFTPPUT:<err>
Otherwise, response
+QFTPPUT:<err>
Parameters
<fileName> The name of the file to upload. The maximum size of
the parameter is 50.
<fileSz> The size of the file to upload. For the file UFS, RAM
and SD, if <fileSz> was set as 0, it will put the file
according to the real size of the file to put.
<time> The maximum time allowed to get file data. The
default value is 900. The unit is second. The larger
l
<fileSz> is, <time> should be set longer.
<upSize> The actual size to upload successfully, theoretically, it
t e
should equals <fileSz>.
l
<err> A negative numeric to indicate the type of error, please
c
refer to the chapter 3.
a
Reference Note:
e i
If the length of the input data from UART reaches <fileSz>, or the time
u t
to input data reaches <time>, the FTP service will stop receiving data
n
from UART.
After CONNECT appears, UART enters to data mode. It is supported
Q ide
to escape data mode by "+++". Please refer to [2] for the details.
For reliable transmission when uploading file, it is strongly
recommended to enable hardware flow control in both TA side and TE
f
side. The command "AT+IFC=2,2" is used to enable hardware flow
control in TA side (Please refer to [1] for the details)..
2.2.4.
o n
AT+QFTPGET Download a file from the FTP server
C
AT+QFTPGET Download a file from the FTP server
Test Command Response
AT+QFTPGET= +QFTPGET: "FILE NAME"
?
OK
Parameters
See Write Command
Write Command Response
AT+QFTPGET= If format is right response
"<fileName>"[,fi OK
leSz]
Otherwise response
ERROR
Next, if the UART successfully enter data mode, response
GSM_FTP_AT_Commands_Manual_V1.4 -9-
GSM FTP AT Commands Manual
CONNECT
Otherwise, response
+QFTPGET:<err>
Finally, if download the file successfully, response
+QFTPGET:<dwSize>
Otherwise, response
+QFTPGET:<err>
Parameters
<fileName> The name of the file to download. The maximum size
l
of the parameter is 50.
<fileSize> The max length of the file. Default is 102400. Unit:
t e
byte. It is only used for RAM file. Ignore this
l
parameter if you use UFS or SD file.
c
<dwSize> The size of the download file.
a
<err> A negative numeric to indicate the type of error, please
e i
refer to the chapter 3.
u t
Reference Note:
n
After CONNECT appears, UART enters to data mode. It is supported
to escape data mode by "+++". Please refer to [2] for the details.
Q ide
For reliable transmission when downloading file, it is strongly
recommended to enable hardware flow control in both TA side and TE
side. The command "AT+IFC=2,2" is used to enable hardware flow
f
control in TA side (Please refer to [1] for the details).
o n
2.2.5. AT+QFTPPATH Set the path in the FTP server to upload or download file
AT+QFTPPATH Set the path in the FTP server to upload or download file
C
Test Command Response
AT+QFTPPATH +QFTPPATH: "PATH NAME"
=?
OK
Parameters
See Write Command
Read Command Response
AT+QFTPPATH OK
?
+QFTPPATH:"<pathName>"
Parameters
See Write Command
Write Command Response
AT+QFTPPATH If format is right, response
GSM_FTP_AT_Commands_Manual_V1.4 - 10 -
GSM FTP AT Commands Manual
="<pathName>" OK
Otherwise, response
ERROR
Next, if the path is set successfully, response
+QFTPPATH:0
Otherwise, response
+QFTPPATH:<err>
Parameters
<pathName> The name of the path to set. The maximum size of the
l
parameter is 100.
<err> A negative numeric to indicate the type of error, please
t e
refer to the chapter 3.
l
Reference
e c ia
2.2.6. AT+QFTPUSER Set the user name of the account to open FTP service
u n t
AT+QFTPUSER Set the user name of the account to open FTP service
Test Command Response
Q ide
AT+QFTPUSER +QFTPUSER: "USER NAME"
=?
OK
f
Parameters
See Write Command
n
Read Command Response
o
AT+QFTPUSER +QFTPUSER:"<userName>"
?
C
OK
Parameters
See Write Command
Write Command Response
AT+QFTPUSER If format is right and the FTP service is idle, response
="<userName>" OK
Otherwise, response
ERROR
Parameters
<userName> The user name of the account. If it is "", the module
will use anonymous account to open FTP service. The
maximum size of the parameter is 30.
Reference
GSM_FTP_AT_Commands_Manual_V1.4 - 11 -
GSM FTP AT Commands Manual
2.2.7. AT+QFTPPASS Set the password of the account to open FTP service
el
OK
t
Parameters
l
See Write Command
c
Write Command Response
e ia
AT+QFTPPASS If format is right and the FTP service is idle, response
t
="<password>" OK
u n
Otherwise, response
Q ide
ERROR
Parameters
<password> The password of the account. The maximum size of the
f
parameter is 30.
n
Reference
o
2.2.8. AT+QFTPCFG Set some configurable parameters for the FTP service
C
AT+QFTPCFG Set some configurable parameters for the FTP service
Test Command Response
AT+QFTPCFG= +QFTPCFG: (1-3)
?
OK
Parameters
See Write Command
Write Command Response
AT+QFTPCFG= If format is right, response
<type>[,<value>] OK
Otherwise, response
ERROR
Next, if the configurable parameter is set successfully, response
GSM_FTP_AT_Commands_Manual_V1.4 - 12 -
GSM FTP AT Commands Manual
+QFTPCFG:0
Otherwise, response
+QFTPCFG:<err>
Parameters
<type> The type of the configurable parameter to set.
1 The mode of data connection.
l
2 The transfer type
3 The resuming point to resume file transfer
t e
4 The local position of the file to transfer
l
<value> The value of the parameter to set. The following is the
c
details about <value>.
a
If (<type> == 1)
e i
0 Active mode
u t
1 Passive mode
n
If (<type> == 2)
0 Set the transfer type as binary
Q ide
1 Set the transfer type as ASCII
If (<type> == 3), it is the resuming point to resume file
transfer.
f
If (<type> == 4), it is a string to indicate the local
position of the file to transfer. The following are the
n
detailed description for the parameter.
o
"/COM/" The file data will be input from UART or
output to UART.
C
"/UFS/" The file to put is a file saved in UFS and
the received file will be saved in UFS. It is also
supported to specify the file name here. For example,
"?UFS/filename.txt". Then, no matter what the
parameter <fileName> is in the command
AT+QFTPPUT, it will read the file "filename.txt" in
UFS to put, and the name of the file in the FTP server
is defined by <fileName>. Likewise, the command
AT+QFTPGET gets the file whose name is defined by
<fileName> in the FTP server and saves it in UFS with
name "filename.txt".
"/SD/" The file to transfer is saved in the
Directory Picture in SD card. It also support to
specify the file name after the path as similar as in UFS
except the root directory is the directory Picture in
GSM_FTP_AT_Commands_Manual_V1.4 - 13 -
GSM FTP AT Commands Manual
el
2.2.9. AT+QFTPSTAT Query status of FTP service
c t l
AT+QFTPSTAT Query status of FTP service
a
Test Command Response
e i
AT+QFTPSTAT OK
u t
=?
n
Execution Response
Q ide
Command +QFTPSTAT: <state>
AT+QFTPSTAT
OK
f
Parameters
n
<state> A string indicate the current status of FTP service
IDLE No FTP service.
o
OPENING Opening an FTP service.
OPENED The FTP service is opened and idle.
C
WORKING Sending FTP commands to the FTP
server and receiving response from
the FTP server to start data transfer.
TRANSFER Transferring data between the
module and the FTP server.
CLOSING Closing the FTP service.
CLOSED The FTP service is closed.
Reference Note:
GSM_FTP_AT_Commands_Manual_V1.4 - 14 -
GSM FTP AT Commands Manual
2.2.10. AT+QFTPLEN Query the real size transferred in the latest transfer
Execution Response
Command +QFTPLEN: <len>
AT+QFTPLEN
OK
l
Parameters
e
<len> A numeric to indicate the real size that has been
t
transferred in the latest transfer operation
c l
(AT+QFTPPUT or AT+QFTPGET).
e ia
Reference Note:
u n t
2.2.11. AT+QFTPRENAME Rename the file or file folder name on the ftp server
Q ide
AT+QFTPRENAME Rename the file or file folder name on the ftp server
Test Command Response
f
AT+QFTPRENA +QFTPRENAME: ("SOURCE NAME","TARGET NAME")
ME=?
n
OK
Parameters
o
See Write Command
Execution Response
C
Command If the format is right, response
AT+QFTPRENA OK
ME="<source
name>","<target Otherwise ,response
name >" ERROR
Next, if the file or file folder renamed successfully, response
+QFTPRENAME: 0
Otherwise ,response
+QFTPRENAME: <err>
Parameters
<source name> The name of the file or file folder you want to rename,
The limitation of the length of the name is 50.
<target name> The name of the file or file folder you want to change t.
GSM_FTP_AT_Commands_Manual_V1.4 - 15 -
GSM FTP AT Commands Manual
2.2.12. AT+QFTPSIZE Query the size of appointed file on the ftp server
l
AT+QFTPSIZE Query the size of appointed file on the ftp server
Test Command Response
t e
AT+QFTPSIZE= +QFTPSIZE: "FILE NAME"
l
?
c
OK
a
Parameters
e i
See Write Command
u t
Execution Response
n
Command If the format is right, response
AT+QFTPSIZE= OK
Q ide
"<file name>"
Otherwise ,response
ERROR
f
Next, if the file size queried successfully, response
+QFTPSIZE:<size>
n
Otherwise ,response
o
+QFTPSIZE: <err>
C
Parameters
<file name> The name of the file you want to check size. The
limitation of the length of the name is 50.
<err> A negative numeric to indicate the type of error, please
refer to the chapter 3.
Reference Note:
If you want to get size of file in sub catalog, the file name should be
like /dir/fileName.
GSM_FTP_AT_Commands_Manual_V1.4 - 16 -
GSM FTP AT Commands Manual
l
AT+QFTPDELE OK
e
TE="<file
t
name>" Otherwise ,response
l
ERROR
c
Next, if the file delete successfully, response
e ia
+QFTPDELETE:0
t
Otherwise ,response
u
+QFTPDELETE: <err>
Q ide n
Parameters
<file name> The name of the file you want to delete. The limitation
of the length of the name is 50.
<err> A negative numeric to indicate the type of error, please
f
refer to the chapter 3.
n
Reference Note:
If you want to delete file in sub catalog, the file name should be
o
like /dir/fileName.
C
2.2.14. AT+QFTPMKDIR Establish a new file folder on the ftp server
ERROR
Next, if the file folder established successfully, response
+QFTPMKDIR:0
Otherwise ,response
+QFTPMKDIR: <err>
Parameters
<path name> The name of the file folder you want to establish. The
limitation of the length of the name is 100.
<err> A negative numeric to indicate the type of error, please
refer to the chapter 3.
l
Reference Note:
This command cannot used to make sub file folder.
c t e l
2.2.15. AT+QFTPRMDIR Remove a file folder on the ftp server
e ia
AT+QFTPRMDIR Remove a file folder on the ftp server
u t
Test Command Response
n
AT+QFTPRMDI +QFTPRMDIR: "PATH NAME"
R=?
Q ide
OK
Parameters
See Write Command
f
Execution Response
Command If the format is right, response
n
AT+QFTPRMDI OK
o
R="<path
name>" Otherwise ,response
C
ERROR
Next, if the file folder established successfully, response
+ QFTPRMDIR:0
Otherwise ,response
+ QFTPRMDIR: <err>
Parameters
<path name> The name of the file folder you want to remove. The
limitation of the length of the name is 100.
<err> A negative numeric to indicate the type of error, please
refer to the chapter 3.
Reference Note:
This command can be only used to remove empty file folder.
GSM_FTP_AT_Commands_Manual_V1.4 - 18 -
GSM FTP AT Commands Manual
2.2.16. AT+QFTPLIST List contents of directory or file information on the ftp server
l
[="<name>"]
e
Otherwise response
t
ERROR
c l
Next, if the UART successfully enter data mode, response
e ia
CONNECT
u t
Otherwise, response
n
+QFTPLIST:<err>
Q ide
Finally, if list the directory information successfully, response
+QFTPLIST: <ret>
Otherwise, response
f
+QFTPLIST:<err>
n
Parameters
<name> A directory name or file name. The type is string. The
o
maximum size of the parameter is 50.
<ret> ret = 1, represent OK; ret = 0, represent no information
C
transferred from FTP.
<err> A negative numeric to indicate the type of error, please
refer to the Summary of Error Codes.
Reference Note:
If the name is a regular file, it will response the information about that
file; if the name is a directory, it will response the contents of the
directory.
If the name was ignored, it will list the contents of the current
directory; else it will base on the current directory.
Please make sure the local position is /COM/. You can set it by
AT+QFTPCFG=4, /COM/.
GSM_FTP_AT_Commands_Manual_V1.4 - 19 -
GSM FTP AT Commands Manual
2.2.17. AT+QFTPNLST List file names in the given directory on the ftp server
AT+ QFTPNLST List file names in the given directory on the ftp server
Test Command Response
AT+QFTPNLST + QFTPNLST: "DIR NAME"
=? OK
Parameters
See Write Command
Write Response
Command If format is right response
AT+ QFTPNLST OK
l
[="<dirName>"]
e
Otherwise response
t
ERROR
c l
Next, if the UART successfully enter data mode, response
e ia
CONNECT
u t
Otherwise, response
n
+ QFTPNLST:<err>
Q ide
Finally, if list the directory information successfully, response
+ QFTPNLST: <ret>
Otherwise, response
f
+ QFTPNLST:<err>
n
Parameters
<dirName> A directory name. The type is string. The maximum
o
size of the parameter is 50.
<ret> ret = 1, represent OK; ret = 0, represent no information
C
transferred from FTP.
<err> A negative numeric to indicate the type of error, please
refer to the Summary of Error Codes.
Reference Note:
It returns just file names in the given directory,
Please make sure the local position is /COM/. You can set it by
AT+QFTPCFG=4, /COM/.
GSM_FTP_AT_Commands_Manual_V1.4 - 20 -
GSM FTP AT Commands Manual
When no command is executed and some error happens, The FTP service will report the URC
"+QFTPERROR:<err>". The error code <err> indicates an error related to mobile
equipment or network. The detail about <err> is described in the following table.
<err> Meaning
-1 Unknown error
-3 The FTP service is busy. Such as, opening FTP service, controlled by
l
another virtual UART, etc.
-4 Failed to get IP address according to domain name
e
-5 Network error. Such as, failed to activate GPRS/CSD context, failed to
t
establish the TCP connection with the FTP server or failed to send FTP
c l
command to the FTP server, etc.
a
-6 The FTP session is closed by the FTP server
e i
-7 The data connection of the FTP service is closed by the FTP server
u t
-8 GPRS/CSD context is deactivated
n
-9 Timeout
-10 The input parameter is illegal
Q ide
-11 The file is not found in the local position, UFS or SD or RAM
-12 Failed to get the file in the local position, UFS or SD or RAM.
-13 No enough memory for attachment
f
-421 The FTP server cant support service
-425 Failed to open data connection
n
-426 The connection is closed and stop transferring
o
-450 The request for the file isnt operated
-452 The FTP server has not enough memory
C
-500 The format of the FTP command is wrong
-501 The parameter of the FTP command is wrong
-502 The FTP command isnt operated by the FTP server
-530 Not login the FTP server
-532 Need the information of account
-550 The request is not operated
-551 The request is stopped
-552 The request of a file is stopped
-553 File name is illegal
GSM_FTP_AT_Commands_Manual_V1.4 - 21 -
GSM FTP AT Commands Manual
4. Examples
AT+QIFGCNT=0 //choose the context 0 to activate GPRS/CSD context for the FTP service,
please refer to [1] and [2].
OK
l
OK
e
AT+QFTPUSER="quectel" //set the user name as "quectel"
t
OK
c a l
AT+QFTPPASS="123456" //set the password as "123456"
e i
OK
u n t
AT+QFTPOPEN="quectel.3322.org",21 //visit the FTP server "quectel.3322.org:21"
OK
Q ide
//wait for a moment
+QFTPOPEN:0 //successfully open the FTP service.
f
Note:
n
Actually, the FTP server "quectel.3322.org:21" does not exist. It is just an example. Besides,
o
it is strongly recommended to execute all the former commands only when SIM PIN is
unlocked.
C
4.2. Upload a file to FTP server
After the FTP service is opened, it is OK to upload a file to the FTP server and download a file
from the FTP server. The following are examples explain how to upload file.
GSM_FTP_AT_Commands_Manual_V1.4 - 22 -
GSM FTP AT Commands Manual
l
AT+QFTPCFG=4,"/UFS/" //set the local position as UFS.
e
OK
t l
+QFTPCFG:0 //successfully to set the local position.
e c ia
AT+QFTPPATH="/" //set the path to upload file as "/"
t
OK
u n
+QFTPPATH:0 //successfully set the path
Q ide
AT+QFTPPUT="sscom.ini",1587,200 //upload the file "sscom.ini" in UFS, and the size
expected to put is 1587. If the real size of the file
"sscom.ini" is less than 1587, it will upload file with
f
the real size. The maximum time to read file data is
n
200 seconds
OK
o
+QFTPPUT:1587 //successfully upload the file "sscom.ini" to the FTP
C
server. The size of the data successfully uploaded is
1587.
GSM_FTP_AT_Commands_Manual_V1.4 - 23 -
GSM FTP AT Commands Manual
l
1587.
e
Note:
t
It is supported to upload a file in the Directory Picture of SD card with the similar method as
c l
the former example in M33. The only difference is to replace "AT+QFTPCFG=4,"/UFS/"" with
a
"AT+QFTPCFG=4,"/SD/"".
u e t i
4.2.4. Upload a specified file in UFS
Q ide n
AT+QFTPCFG=4,"/UFS/test.txt" //set "test.txt" in UFS as the local file to put or get.
OK
n f
AT+QFTPPATH="/" //set the path to upload file as "/"
OK
o
+QFTPPATH:0 //successfully set the path
C
AT+QFTPPUT="sscom.ini",1587,200 //upload the file "test.txt" in UFS and modify its
name as "sscom.ini" in the FTP server, and the size
expected to put is 1587. If the real size of the file
"sscom.ini" is less than 1587, it will upload file with
the real size. The maximum time to read file data is
200 seconds
OK
GSM_FTP_AT_Commands_Manual_V1.4 - 24 -
GSM FTP AT Commands Manual
Note:
It is supported to upload a specified file in the Directory Picture of SD card with the similar
method as the former example in M33. The only difference is to replace
"AT+QFTPCFG=4,"/UFS/test.txt"" with "AT+QFTPCFG=4,"/SD/test.txt"". Of course,
"test.txt" must be a file in the directory "Picture" in SD card.
l
4.3.1. Download a file through UART
t e
AT+QFTPPATH="/" //set the path to download file as "/"
c l
OK
e ia
+QFTPPATH:0 //successfully set the path
u n t
AT+QFTPGET="sscom.ini" //download the file "sscom.ini" from the FTP server.
OK
Q ide
CONNECT //successfully open data connection to download file.
//the data of the file "sscom.ini" outputs from UART.
f
+QFTPGET:1587 //successfully download the file "sscom.ini" from the
FTP server. And the size of the data successfully
n
downloaded is 1587. Of course, this sentence is
possible the content of the file "sscom.ini". So, it is
o
recommended to execute the command AT later to
confirm whether the file has been downloaded over.
C
AT //input AT from UART.
OK //there is an OK response for AT, which means the
download operation is finished.
GSM_FTP_AT_Commands_Manual_V1.4 - 25 -
GSM FTP AT Commands Manual
Note:
l
It is supported to download a file into the Directory Picture of SD card with the similar method
as the former example in M33. The only difference is to replace "AT+QFTPCFG=4,"/UFS/""
e
with "AT+QFTPCFG=4,"/SD/"".
4.3.3.
c t a l
Download a file into a specified file in UFS
e t i
AT+QFTPCFG=4,"/UFS/dwl.txt" //set the local position as UFS and the data from
u
server will be saved in the file "dwl.txt".
n
OK
Q ide
+QFTPCFG:0 //successfully to set the local position.
AT+QFTPPATH="/" //set the path to download file as "/"
OK
n f
+QFTPPATH:0 //successfully set the path
o
AT+QFTPGET="sscom.ini" //download the file "sscom.ini" from the FTP
server and save it in UFS with name "dwl.txt".
C
OK
AT+QFTPCFG=4,"/RAM/dwl.txt" //set the local position as RAM and the data from
server will be saved in the file "dwl.txt".
OK
GSM_FTP_AT_Commands_Manual_V1.4 - 26 -
GSM FTP AT Commands Manual
l
keep this parameter bigger than the size of file you
want to get in FTP server.
e
OK
c t l
+QFTPGET:1587 //successfully download the file "sscom.ini" from
a
the FTP server. And the size of the data
e i
successfully downloaded is 1587.
Note:
u n t
Q ide
It is supported to download a file and save it into a specified file in the Directory Picture of
SD card with the similar method as the former example in M33. The only difference is to
replace "AT+QFTPCFG=4,"/UFS/dwl.txt"" with "AT+QFTPCFG=4,"/SD/dwl.txt"".
n f
4.4. Operate a file or a file folder on the FTP
o
4.4.1. Operate a file on the FTP server
C
AT+QFTPRENAME="sscom.ini","test.txt" //rename the filesscom.ini to test.txt
OK
l
OK
t e
+QFTPMKDIR:0 // successfully remove the file folder
c l
Note:
a
If the file or file folder dose not exist, it will return error:550. If there are problems on the
e i
connection, it will return error:-1.
u n t
Q ide
4.5. Resume file at the resuming point
f
Module supports to transfer file at the resuming point if the server supports this function so
n
that it is unnecessary to retransfer the data that has been transferred. And this function makes
it possible to split a huge file into several small parts and then upload the file part by part. It is
o
necessary to execute the command "AT+QFTPCFG=3,<resuming point>" before putting or
getting remaining data. Please refer to the following examples.
C
4.5.1. Upload a file to FTP server from the resuming point
GSM_FTP_AT_Commands_Manual_V1.4 - 28 -
GSM FTP AT Commands Manual
+QFTPCFG:0
AT+QFTPPUT="sscom.ini",2000,200 //upload the remaining 2000 bytes of the file
"sscom.ini" to the server.
OK
CONNECT
//input the rest data of the file "sscom.ini" from the
position 1587
l
+QFTPPUT:2000 //successfully upload the rest 2000 bytes
e
Note:
t
If the file to put was saved in UFS or SD or RAM, it will put the file from the resuming point. For
c l
example: the size of the file to put is 5120 and the resuming point was set as 1587, then it will
a
upload the data from 1587 to 3586 (including it) in the file to put. If the size of the file is less than
e i
3587, it will upload the data from 1587 to the end of the file.
4.5.2.
u n t
Download a file from FTP server from the resuming point
Q ide
Similar as uploading, it is supported to download file from the resuming point. For example,
if file sscom.ini has been downloaded 1587 bytes, while the total size is 3587 bytes. It is
supported to download the rest data from the position 1587.
n f
AT+QFTPCFG=3,1587 //Set the resuming point.
OK
o
+QFTPCFG:0
C
AT+QFTPGET="sscom.ini" //download the rest data of "sscom.ini" from the
FTP server.
OK
CONNECT
//the data of the file "sscom.ini" started from the
position 1587 outputs from UART
+QFTPGET:2000 //successfully download the rest file of 2000 bytes
from the FTP server.
Note:
If the downloaded file was expected to save in UFS or SD or RAM, it will put the received data in
the file to save from the resuming point. For example: the resuming point was set as 1587 and the
original size to save the received data is not less than 1587, then the received data will be put into
the file to save from 1587. If the size of the file is less than 1587, it will return error
GSM_FTP_AT_Commands_Manual_V1.4 - 29 -
GSM FTP AT Commands Manual
"+QFTPGET:-12".
el
AT+QFTPCFG=4,"/COM/" //set the local position as COM
t
OK
c l
+QFTPCFG:0 //successfully to set the local position.
e t ia
AT+QFTPLIST //list the contents of current directory
u
OK
Q ide n
CONNECT
-rw-rw-rw- 1 user group 239 Jul 18 15:45 #.dat
f
drw-rw-rw- 1 user group 0 Jul 16 14:14 tsj
n
+QFTPLIST: 1
o
AT+QFTPLIST="ANDY" //list the contents in the directory of andy
C
OK
CONNECT
-rw-rw-rw- 1 user group 0 Mar 17 17:21 1.text
+QFTPLIST: 1
Note:
Please make sure the local position is /COM/, you can use AT+QFTPCFG=4,"/COM/" to set
it.
GSM_FTP_AT_Commands_Manual_V1.4 - 30 -
GSM FTP AT Commands Manual
el
+QFTPCFG:0 //successfully to set the local position.
t l
AT+QFTPNLST // list file names of current directory
c
OK
e t ia
CONNECT
u
Aaa.jpg
Q ide
Test.txt
+QFTPNLST: 1
f
AT+QFTPNLST="ANDY" // list the file names in the directory ofandy
n
OK
o
CONNECT
Mytest.txt
Mytest.jpg
+QFTPNLST: 1
Note:
Please make sure the local position is /COM/, you can use AT+QFTPCFG=4,"/COM/" to set
it.
GSM_FTP_AT_Commands_Manual_V1.4 - 31 -
GSM FTP AT Commands Manual
OK
Generally, if the FTP service is not used for a time of period, the FTP server will indicate the user
that the FTP service cannot be used. The module will report "+QFTPERROR:-421" for this
information. After a moment, the FTP server will close the control connection of the FTP service.
l
And the module will report "+QFTPERROR:-6" for this information. It is recommended to
execute the command "AT+QFTPCLOSE" to close the FTP service after receiving these two
e
report messages from UART.
c t a l
u e n t i
Q ide
n f
Co
GSM_FTP_AT_Commands_Manual_V1.4 - 32 -
Quectel Wireless Solutions Co., Ltd.
Room 501, Building13, No.99, Tianzhou Road, Shanghai, China 200233
Tel: +86 21 5108 6236
Mail: [email protected]