KSB Centrifugal Etanorm
KSB Centrifugal Etanorm
Etanorm
All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
edited or processed for any other purpose, nor otherwise transmitted, published or made available to
a third party without the manufacturer's express written consent.
Contents
3
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Designation
Example: Etanorm 050-032-160 GB X 10
Key to the designation
Main applications Code Description Region
Pump for handling clean or aggressive fluids not chemically Etanorm Type series A, B, C
and mechanically aggressive to the pump materials. 050 Nominal suction nozzle A, B, C
diameter [mm]
Water supply systems
032 Nominal discharge nozzle A, B, C
Cooling circuits diameter [mm]
Swimming pools 160 Nominal impeller diameter A, B, C
[mm]
Fire-fighting systems
G Casing material
Irrigation systems
G Cast iron A, B, C
Drainage systems B Bronze A, C1)
Heating systems S Nodular cast A, C1)
iron
Air-conditioning systems
C Stainless steel A, C
Spray irrigation systems B Impeller material if different
from casing material
G Cast iron A, B, C
Fluids handled C Stainless steel A, B, C
Seawater B, I Bronze A, B, C
Brackish water X Additional code
1) On request
4 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Single-stage
Dimensions and ratings to EN 733
Complies with the 2009/125/EC Directive
Pump casing
Radially split volute casing
Volute casing with integrally cast pump feet2)
Replaceable casing wear rings
Impeller type
Closed radial impeller with multiply curved vanes
Shaft seal
Shaft seal
Shaft seal design Region
Gland packing A, B, C
Single mechanical seals to EN 12756 A, B, C
Double mechanical seals to EN 12756 A, C
Shaft equipped with replaceable shaft A, B, C
protecting sleeve in the shaft seal area
Bearings
Bearings
Bearing design Region
Standard bearings A, B, C
Floating bearings: deep groove ball bearings
Reinforced bearings A, B, C
Floating bearings: deep groove ball bearings
Bearings with bearing pedestal C
Floating bearings: deep groove ball bearings
Example: WS_25_LS
Bearing bracket designation
Code Description Region
WS Bearing bracket, A, B, C
standardised water pump
25 Size code (based on A, B, C
dimensions of seal chamber
and shaft end)
LS Standard A, B, C
LR Reinforced A, B, C
PS Bearing pedestal C
Bearings used
Standard bearings
Design Bearing bracket Rolling element bearings
Pump end Drive end Region
Standard bearings (grease-lubricated) WS_25_LS 6305 2Z C3 6305 2Z C3 A, B, C
WS_35_LS 6307 2Z C3 6307 2Z C3 A, B, C
WS_55_LS 6311 2Z C3 6311 2Z C3 A, B, C
Standard bearings (oil-lubricated) WS_25_LS 6305 C3 6305 C3 A, B, C
WS_35_LS 6307 C3 6307 C3 A, B, C
WS_55_LS 6311 C3 6311 C3 A, B, C
Reinforced bearings (grease- WS_50_LR 6310 2Z C3 6310 2Z C3 A, B, C
lubricated) WS_60_LR 6312 2Z C3 6312 2Z C3 A, B, C
Reinforced bearings (oil-lubricated) WS_50_LR 6310 C3 6310 C3 A, B, C
2) Depending on the size, pumps with bearing pedestal have integrally cast pump feet.
Etanorm 5
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Improved efficiency and NPSHreq by experimentally verified Information on benchmark efficiency or benchmark
hydraulic design of impellers (vanes) efficiency graph for MEI = 0.7 (0.4) for the pump based on
the model shown in the Figure are available at: http://
Low energy costs through compliance with future www.europump.org/efficiencycharts
requirements of Commission Regulation 547/2012
(minimum efficiency index MEI 0.4)
Operating costs reduced by trimming the impeller
diameter to match the specified duty point
Little wear, low vibration levels and excellent smooth
running characteristics thanks to good suction
performance and virtually cavitation-free operation across
a wide operating range
Casing sealed reliably even in varying operating
conditions by confined casing gasket
Large variety of materials for perfectly matching the pump
to the fluid handled. Large range of materials for many
applications available as a standard
Extended selection chart with additional pump sizes for
small flow rates
Easy to dismantle with forcing screws provided at the
interface of casing cover and bearing bracket lantern
3) On request
6 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Acceptance tests/warranty
Overview of acceptance tests/warranty
Acceptance tests/warranty Region
Materials testing
Test report 2.2 on request A, B, C
Final inspection
Inspection certificate 3.1 to EN 10204 on request A, B, C
Hydraulic test against surcharge
The operating point of each pump with a delivery address or final destination in Europe is A
warranted in accordance with ISO 9906/2B.
The operating point of each pump with a delivery address or final destination outside of B, C
Europe is warranted in accordance with ISO 9906/2B and ISO 9906/3B.
NPSH test A, B, C
Other inspections/tests possible on request A, B, C
Warranty
Warranties are given within the scope of the valid delivery conditions. A, B, C
Etanorm 7
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Gland packing4)
Mechanical seal
Grey cast iron/
Pure graphite
grey cast iron
Q12Q1M1GG
Temperature
Q1Q1X4GG
Tin bronze/
tin bronze
tin bronze
Q1Q1EGG
U3U3VGG
BQ1EGG
U3BEGG
RT-P
[C] G GB SG BB C 1 3 6 7 9 10 11 12
Water
Condensate 120 1 11
Pure water9) 60 1 11
Raw water 60 1 10
Drinking water11) 60 1 11
8 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Gland packing4)
Mechanical seal
Grey cast iron/
Pure graphite
grey cast iron
Q12Q1M1GG
Temperature
Q1Q1X4GG
Tin bronze/
tin bronze
tin bronze
Q1Q1EGG
U3U3VGG
BQ1EGG
U3BEGG
RT-P
[C] G GB SG BB C 1 3 6 7 9 10 11 12
Brewery applications
Etanorm 9
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Pressure and temperature limits of pump with flanges to EN 1092-1, 1092-2 and 1092-3
p2 [bar] 16
JS1030/A536 GR 60 - 40 - 18
DN25-150 JL1040/A48 CL 35B
1.4408/A743 GR CF8M
14
12
8
-30 20 70 T [C] 120 140
12
10 CC480K-GS/B30 C90700
JL1040/ A48 CL 35B
1.4408/ A743 GR CF8M
8
-30 20 70 T [C] 120 140
p1/p2 [bar] 16
DN25-200
1.4408/A743 GR CF8M
14
12
JL1040/A48 CL 35B
JS1030/A536 GR 60 4018
10 CC480K GS/B30 C90700
8
30 20 70 T [C] 120 140
12) For hot water heating systems to DIN 4752, Section 4.5, application limits must be observed.
13) For fluid temperatures >140 C use Etanorm SYT.
14) The casing components are checked for leakage by means of internal pressure tests to AN 1897/75-03D00 with water.
15) On request
10 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Materials
Overview of materials available for Europe
Part No. Description Material variant
G GB GC GI B S SB SC C
102 Volute casing Grey cast iron JL1040/ A 48 CL 35B A1 A1 A1 - - - - - -
Bronze CC480K-GS/B30 C90700 - - - - A1 - - - -
Nodular cast iron JS1030/ - - - - - A1 A1 A1 -
A536 GR 60-40-18
Stainless steel 1.4408/ A743 Gr CF8 M - - - - - - - - A1
161 Casing cover, conical Grey cast iron JL1040 / A 48 CL 35B A1 A1 A1 - - - - - -
Bronze CC480K-GS / B30 C90700 - - - - A1 - - - -
Nodular cast iron JS1030/ A536 GR - - - - - A1 A1 A1 -
60-40-18
Stainless steel 1.4408/ A743 Gr CF8 M - - - - - - - - A1
161 Casing cover, Grey cast iron JL1040/ A 48 CL 35B A2 A2 A2 - - - - - -
cylindrical Stainless steel 1.4408/ A743 Gr CF8 M - - - - - - - - A2
Bronze CC480K-GS / B30 C90700 - - - - A2 - - - -
210 Shaft Tempered steel C45+N A1 A1 A1 - - A1 A1 A1 -
Chrome steel 1.4057+QT800 A2 A2 A2 - - A2 A2 A2 -
Duplex stainless steel 1.4462/ A2 A2 A2 - A1 A2 A2 A2 A1
UNS S31803
230 Impeller Grey cast iron JL1040/ A 48 CL 35B A1 - - - - A1 - - -
Bronze CC480K-GS / B30 C90700 - A1 - - A1 - A1 - -
Stainless steel 1.4408/ A743 Gr CF8 M - - A1 - - - - A1 A1
330 Bearing bracket Grey cast iron JL1040/ A 48 CL 35B A1 A1 A1 - A1 A1 A1 A1 A1
400 Sealing elements DPAF, asbestos-free A1 A1 A1 - A1 A1 A1 A1 A1
502.01 Casing wear ring, Grey cast iron JL1040 / CI A1 A1 A1 - - A1 A1 A1 -
suction side Stainless steel (CrNiMoST)16) A2 - A2 - - - - - A2
Bronze CC480K-GS - A2 - - A1 - A2 - -
502.02 Casing wear ring, Grey cast iron JL1040 / CI16) A1 A1 A1 - - A1 A1 A1 -
discharge side Stainless steel (CrNiMoST) A2 - A2 - - - - - A2
Bronze CC480K-GS16) - A2 - - A1 - A2 - -
523 Shaft sleeve17) Stainless steel (CrNiMoST) A1 A1 A1 - A1 A1 A1 A1 A1
524 Shaft protecting Stainless steel (CrNiMoST)16) - - - - A1 - - - A1
sleeve18) Chrome steel 1.4122HV500+80 A1 A1 A1 - - - - - -
902 Studs Steel 8.8 A1 A1 A1 - - A1 A1 A1 -
A4-70/ A193 Gr B8M CL2 A2 A2 A2 - A1 A2 A2 A2 A1
903 Screw plug Steel A1 A1 A1 - - A1 A1 A1 -
CC 493K-GS - - - - A1 - - - -
A4/ AISI 316 A2 A2 A2 - - A2 A2 A2 A1
920 Nut 8+A2A/ 8+B633 SC1 TP3 A1 A1 A1 - - A1 A1 A1 -
A4/ AISI 316 A2 A2 A2 - A1 A2 A2 A2 A1
920.95 Impeller nut A4/ AISI 316 A2 A1 A1 - A1 A2 A1 A1 A1
Steel 8 A1 - - - - A1 - - -
16) Material group CRNIMO ST (WSZ 7605). Possible materials: 1.4401, 1.4404; 1.4408; 1.4571; AISI 316; AISI 316TI; A743 GR
CF8M; A479 TYPE 316L
17) Variants with mechanical seal
18) Variants with gland packing
Etanorm 11
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
19) Material group CRNIMO ST (WSZ 7605). Possible materials: 1.4401, 1.4404; 1.4408; 1.4571; AISI 316; AISI 316TI; A743 GR
CF8M; A479 TYPE 316L
12 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Etanorm 13
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Technical data
Technical data
Sizes Bearing bracket Impeller Speed limit
LS LR PS Impeller Impeller Impeller diameter max min
outlet inlet max min
width diameter
[mm] [mm] [mm] [mm] [rpm] [rpm]
040-025-160 WS_25_LS - WS_25_PS 6,0 45,2 169 130 3500 500
040-025-200 WS_25_LS - WS_25_PS 6,0 45,2 209 160 3500 500
050-032-125.1 WS_25_LS - WS_25_PS 6,6 52,4 139 104 4300 500
050-032-160.1 WS_25_LS - WS_25_PS 5,7 52,7 170 136 4400 500
050-032-200.1 WS_25_LS - WS_25_PS 5,6 54,0 204 170 3800 500
050-032-250.1 WS_25_LS - WS_25_PS 5,5 58,3 254 200 3000 500
050-032-125 WS_25_LS - WS_25_PS 9,8 63,4 139 104 4200 500
050-032-160 WS_25_LS - WS_25_PS 8,5 60,6 174 136 3500 500
050-032-200 WS_25_LS - WS_25_PS 7,0 62,9 209 170 3700 500
050-032-250 WS_25_LS - WS_25_PS 7,5 62,6 261 209 3000 500
065-040-125 WS_25_LS - WS_25_PS 14,0 73,9 139 104 4000 500
065-040-160 WS_25_LS - WS_25_PS 13,0 70,0 174 128 4400 500
065-040-200 WS_25_LS - WS_25_PS 9,4 69,4 209 165 3700 500
065-040-250 WS_25_LS - WS_25_PS 8,4 74,1 260 200 3000 500
065-040-315 WS_35_LS - WS_35_PS 7,5 75,3 326 260 2300 500
065-040-315 - WS_50_LR - 7,5 75,3 326 260 3000 500
065-050-125 WS_25_LS - WS_25_PS 19,9 87,9 142 112 4500 500
065-050-160 WS_25_LS - WS_25_PS 16,9 86,9 174 128 4400 500
065-050-200 WS_25_LS - WS_35_PS 13,8 83,1 219 170 3400 500
065-050-250 WS_25_LS - WS_25_PS 10,5 84,0 260 215 3000 500
065-050-315 WS_35_LS - WS_35_PS 10,0 87,0 323 265 2400 500
065-050-315 - WS_50_LR - 10,0 87,0 323 265 3000 500
080-065-125 WS_25_LS - WS_25_PS 25,8 99,0 141 109 4000 500
080-065-160 WS_25_LS - WS_25_PS 21,0 92,0 174 132 3900 500
080-065-200 WS_25_LS - WS_25_PS 17,0 99,7 219 175 3000 500
080-065-250 WS_35_LS - WS_35_PS 15,1 101,0 260 215 3000 500
080-065-315 WS_35_LS - WS_35_PS 13,7 108,2 320 260 2400 500
080-065-315 - WS_60_LR - 13,7 108,2 320 260 3000 500
100-080-160 WS_25_LS - WS_25_PS 31,6 124,0 174 138 3500 500
100-080-200 WS_35_LS - WS_35_PS 24,5 115,0 219 180 3500 500
100-080-250 WS_35_LS - WS_35_PS 19,0 115,0 269 215 2900 500
100-080-315 WS_35_LS - WS_35_PS 18,7 115,6 334 269 1900 500
100-080-315 - WS_60_LR - 18,7 115,6 334 269 3000 500
100-080-400 WS_55_LS - WS_55_PS 15,0 130,0 398 330 1900 500
125-100-160 WS_35_LS - WS_35_PS 37,6 135,0 185 162 3600 500
125-100-200 WS_35_LS - WS_35_PS 32,5 142,0 219 179 3300 500
125-100-250 WS_35_LS - WS_35_PS 27,0 145,0 269 210 2500 500
125-100-315 WS_35_LS - WS_35_PS 23,0 142,0 334 270 1800 500
125-100-315 - WS_60_LR - 23,0 142,0 334 270 3000 500
125-100-400 WS_55_LS - WS_55_PS 18,0 142,8 401 329 1900 500
150-125-200 WS_35_LS - WS_35_PS 40,7 159,0 224 182 2600 500
150-125-250 WS_35_LS - WS_35_PS 37,0 162,4 269 218 2000 500
150-125-315 WS_55_LS - WS_55_PS 30,9 162,0 334 270 2300 500
150-125-400 WS_55_LS - WS_55_PS 25,9 162,4 419 330 1800 500
200-150-200 WS_35_LS - WS_35_PS 59,5 180,0 224 188 2300 500
200-150-250 WS_35_LS - WS_35_PS 48,8 191,0 269 220 1800 500
200-150-315 WS_55_LS - WS_55_PS 39,7 191,5 334 264 2100 500
200-150-400 WS_55_LS - WS_55_PS 33,0 191,4 419 330 1800 500
14 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Selection charts
500
400
50-200
50 65-200
25-200 32-200
80-200 100-200
32-200.1 40-200
40 125-200
30 100
32-160 50-160 100-160
25-160 32-160.1 40-160 65-160 80-160
ft
20
32-125
40-125
32-125.1 65-125
H 50
[m] 50-125
40
10
30
8
5 Q[m/h] 10 20 30 40 50 100 200 300 400 500 700
2 3 4 5 l/s 10 20 30 40 50 100
Etanorm 15
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
200
50
30 100
150-315
20
40
5
ft
32-125.1 32-125 40-125 50-125 65-125
4
3 10
1.6
2.5 3 4 5 Q[m/h] 10 20 30 40 50 100 200 300 400 500 700
1 l/s 2 3 4 5 10 20 30 40 50 100
20
80-400 125-400 150-400
100-400 50
5
25-200 32-200.1 32-200 40-200 50-200 65-200 80-200 100-200 125-200
4
150-200
3 10
ft
2
32-125.1 32-125 40-125 50-125 65-125
H 5
[m]
1
1.6 2 3 4 5 Q[m/h] 10 20 30 40 50 100 200 300 400 500
16 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
400
32-250
50-250 65-250 80-250 100-250
100
32-250.1 40-250
300
H 50-200
[m] 65-200
125-200
50
32-160 50-160
40 65-160
25-160 32-160.1 40-160 100-160
80-160
30 100
32-125
40-125
32-125.1 65-125
ft
50-125
20
50
12 40
5 Q[m/h] 10 20 30 40 50 100 200 300 400 500 800
125-400 150-400
200
80-400
100-400
50
40
40-315 50-315 65-315 80-315 100-315 125-315
150-315 100
30
50-200 65-200
40-200 50
25-200 32-200.1 32-200 80-200 100-200 125-200
40
150-200
10 50-160
32-160.1 32-160 40-160 30
65-160
80-160 100-160
H 25-160
[m]
32-125 40-125
20
32-125.1
50-125 65-125
5
ft
4
3 10
2
3 4 5 Q[m/h] 10 20 30 40 50 100 200 300 400 500 800
Etanorm 17
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
40
30 100
40
50-250 65-250 80-250
32-250.1 32-250 40-250
10
100-250 125-250 30
150-250
50-200 65-200 80-200
25-200 32-200.1 32-200 40-200 100-200 125-200 20
5
150-200
32-160.1 32-160 40-160 50-160 65-160
4
25-160 80-160 100-160
3 10
32-125.1 32-125 40-125
50-125 65-125 ft
2
H
5
[m]
1
2 3 4 5 Q[m/h] 10 20 30 40 50 100 200 300 400 500
1 l/s 2 3 4 5 10 20 30 40 50 100
18 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Dimensions
a f x a1 p
DN2
h2
DN1
h1
g1
UG 1389743-CD2-D01/02
g2
i1 w v
Pump dimensions
i2
b
u
m2 d
n3
n5
n2
n4
s2
n1
s1
m3 t
m1
Etanorm 19
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Size Bearing Bearing DN120) DN220) a20) a1 b20) d20) f20) g1 g2 h120) h220) i1 i2 l20) m120) m2
bracket bracket
080-065-200 WS_25_LS - 80 65 100 155 65 24 360 18 6 180 225 47,5 25 50 125 95
080-065-250 WS_35_LS - 80 65 100 179 80 32 470 20 6 200 250 60 24 80 160 120
080-065-315 WS_35_LS - 80 65 125 209 80 32 470 20 6 225 280 60 24 80 160 120
080-065-315 - WS_60_LR 80 65 125 209 80 4221) 53021) 20 6 225 280 60 26 110 160 120
100-080-160 WS_25_LS - 100 80 125 138 65 24 360 18 6 180 225 47,5 25 50 125 95
100-080-200 WS_35_LS - 100 80 125 159 65 32 470 18 4 180 250 47,5 22 80 125 95
100-080-250 WS_35_LS - 100 80 125 183 80 32 470 18 6 200 280 60 24 80 160 120
100-080-315 WS_35_LS - 100 80 125 218 80 32 470 20 6 250 315 60 24 80 160 120
100-080-315 - WS_60_LR 100 80 125 218 80 4221) 53021) 20 6 250 315 60 26 110 160 120
100-080-400 WS_55_LS - 100 80 125 257 80 42 530 20 6 280 355 60 25 110 160 120
125-100-160 WS_35_LS - 125 100 125 178 80 32 470 18 6 200 280 60 24 80 160 120
125-100-200 WS_35_LS - 125 100 125 173 80 32 470 18 6 200 280 60 24 80 160 120
125-100-250 WS_35_LS - 125 100 140 188 80 32 470 18 6 225 280 60 24 80 160 120
125-100-315 WS_35_LS - 125 100 140 225 80 32 470 18 6 250 315 60 24 80 160 120
125-100-315 - WS_60_LR 125 100 140 225 80 4221) 53021) 18 6 250 315 60 26 110 160 120
125-100-400 WS_55_LS - 125 100 140 255 100 42 530 20 6 280 355 75 25 110 200 150
150-125-200 WS_35_LS - 150 125 140 189 80 32 470 20 6 250 315 60 24 80 160 120
150-125-250 WS_35_LS - 150 125 140 226 80 32 470 20 6 250 355 60 24 80 160 120
150-125-315 WS_55_LS - 150 125 140 243 100 42 530 20 6 280 355 75 25 110 200 150
150-125-400 WS_55_LS - 150 125 140 277 100 42 530 20 6 315 400 75 25 110 200 150
200-150-200 WS_35_LS - 200 150 160 240 100 32 470 20 6 280 400 75 24 80 200 150
200-150-250 WS_35_LS - 200 150 160 230 100 32 470 20 6 280 400 75 24 80 200 150
200-150-315 WS_55_LS - 200 150 160 255 100 42 530 20 6 280 400 75 25 110 200 150
200-150-400 WS_55_LS - 200 150 160 289 100 42 530 20 6 315 450 75 25 110 200 150
20 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Size Bearing Bearing DN120) DN220) m320) n120) n220) n320) n4 n5 p s120) s220) t u v w20) x20)
bracket bracket
200-150-315 WS_55_LS - 200 150 48 550 450 350 110 160 304 24 14 45 12 160 370 140
200-150-400 WS_55_LS - 200 150 48 550 450 350 110 160 331 24 14 45 12 160 370 140
Etanorm 21
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
22 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Connections
DN2
1M 6D
6D
1M
DN1
6B
13B 8B
Connections
Connection Description Configuration Position Region
1M Pressure gauge connection On pump set with pressure DN2 A, B, C
sensor
6B Fluid drain Drilled and closed - A, B, C
6D Fluid priming and venting Drilled and closed DN2, suction side A, C
8B Leakage drain Drilled and closed - A, B, C
1M optional Pressure gauge connection Drilled and closed or with DN1 A, B
pressure sensor
6D optional Fluid priming and venting Drilled and closed DN2, drive end A, B
13B Oil drain Drilled and closed - B, C
Connections
Size Bearing Europe India South Africa
bracket Casing material
G, B C, S G, B, C, G G C G, C
S
Connection
1M / 6D / 6B 8B 1M / 6D / 6B 8B 1M / 6D / 6B 8B 13B
040-025-160 WS_25_LS Rc 1/4 G 1/4 G 1/2 G 1/4 NPT 1/2-14 Rc 1/4 G 1/4 G 1/2 G 1/4
040-025-200 WS_25_LS Rc 1/4 G 1/4 G 1/2 G 1/4 NPT 1/2-14 Rc 1/4 G 1/4 G 1/2 G 1/4
Etanorm 23
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Flange design
Flange design by materials
Material variant Standard Nominal size Pressure class Regio
n
G, GB, GC EN 1092-2 DN 25 - DN 150 PN 16 A, C
DN 200 PN 10
Drilled to ASME B16.122) DN 25 - DN 200 Class 125 A, B
24 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Scope of supply
Depending on the design variant the following components
are included in the scope of supply:
Scope of supply
Scope of supply Region
Pump A, B, C
Baseplate A, B, C
Coupling A, B, C
Coupling guard A, B, C
Motor A, C
Etanorm 25
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Pump set with standardised mechanical seal and bolted casing cover
List of components
Part No. Description Part No. Description
102 Volute casing 554.98 Lock washer
161 Casing cover 81-92.01/.02 Cover plate
183 Support foot 901.04/.30/.31/.98 Hexagon head bolt
210 Shaft 902.01/.15 Stud
230 Impeller 903.01/.02/.03/.04 Screw plug
321.01/.02 Deep groove ball bearing 914.02 Round-head screw
330 Bearing bracket 920.01/.15/.95 Hexagon nut
360.01./02 Bearing cover 930.95 Spring washer
400.10/.75 Gasket 932.01/.02 Circlip
411.01/.02/.03/.04 Joint ring23) 940.01/.02/.0924) Key
26 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Etanorm 27
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Pump set with standardised mechanical seal and clamped casing cover
List of components
Part No. Description Part No. Description
102 Volute casing 554.98 Lock washer
161 Casing cover 81-92.01/.02 Cover plate
183 Support foot 901.04/.30/.31/.98 Hexagon head bolt
210 Shaft 902.01/.15 Stud
230 Impeller 903.01/.02/.03/.04 Screw plug
321.01/.02 Deep groove ball bearing 914.02 Round-head screw
330 Bearing bracket 920.01/.95 Hexagon nut
360.01./02 Bearing cover 930.95 Spring washer
400.10/.75 Gasket 932.01/.02 Circlip
411.01/.02/.03/.04 Joint ring27) 940.01/.02/.0928) Key
28 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Etanorm 29
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
List of components
Part No. Description Part No. Description
102 Volute casing 550.9532) Disc
161 Casing cover 554.98 Lock washer
183 Support foot 81-92.01/.02 Cover plate
210 Shaft 901.04/.30/.98 Hexagon head bolt
230 Impeller 902.01/.02/.15 Stud
321.01/.02 Deep groove ball bearing 903.01/.02/.03/.04 Screw plug
330 Bearing bracket 914.02 Round-head screw
360.01./02 Bearing cover 920.01/.02/.15/.95 Hexagon nut
400.10/.75 Gasket 930.95 Spring washer
30 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Etanorm 31
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
List of components
Part No. Description Part No. Description
102 Volute casing 550.9536) Disc
161 Casing cover 554.98 Lock washer
183 Support foot 81-92.01/.02 Cover plate
210 Shaft 901.04/.30/.98 Hexagon head bolt
230 Impeller 902.01/.02 Stud
321.01/.02 Deep groove ball bearing 903.01/.02/.03/.04 Screw plug
330 Bearing bracket 914.02 Round-head screw
360.01./02 Bearing cover 920.01/.02/.15/.95 Hexagon nut
400.10/.75 Gasket 930.95 Spring washer
411.01/.02/.03/.04 Joint ring37) 932.01/.02 Circlip
32 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Etanorm 33
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
Reinforced bearings
List of components41)
Part No. Description Part No. Description
183 Support foot 901.01/.02/.04/.31 Hexagon head bolt
210 Shaft 920.95 Hexagon nut
330 Bearing bracket 930.95 Spring washer
321.01/.02 Deep groove ball bearing 940.01/.02/.0942) Key
360.01/.02 Bearing cover
421.01/.02 Lip seal Connections:
507.01 Thrower 8B Leakage drain
41) Some individual components might not be applicable, depending on the size and material.
42) For shaft unit 60 only
34 Etanorm
Centrifugal Pumps with Shaft Seal
Standardised Water Pumps
List of components43)
Part No. Description Part No. Description
183 Support foot 672 Venting device
210 Shaft 731.21 Pipe union
330 Bearing bracket 901.01/.02/.04/.31 Hexagon head bolt
321.01/.02 Deep groove ball bearing 903.46 Screw plug
360.01/.02 Bearing cover 920.95 Hexagon nut
400.01/.02 Gasket 930.95 Spring washer
411.46 Joint ring 940.01/.02/.09 44) Key
421.01/.02 Lip seal Connections:
507.01 Thrower 8B Leakage drain
550.95 45) Disc 13B Oil drain
638 Constant level oiler 13D Oil filling and venting
43) Some individual components might not be applicable, depending on the size and material.
44) For shaft units 55 and 60 only
45) For shaft unit 25 only
Etanorm 35
28.08.2013
KSB Aktiengesellschaft
67225 Frankenthal Johann-Klein-Str. 9 67227 Frankenthal (Deutschland)
Tel. +49 6233 86-0 Fax +49 6233 86-3401
www.ksb.de