Serie 1 3 Skruvdragare
Serie 1 3 Skruvdragare
Edition 1
January 2006
Air Screwdrivers
1R Series
Parts Information
(Dwg. TPA-1857)
2 16574550_ed1
1R Screwdriver Motor Housing Assemblies Parts List
Item Part Description Part Number Item Part Description Part Number
Motor Housing Assembly (for 1RL Models ending in S1 or S3) 3RL-510
for 1RA models 3RA-EU-A40 13F Throttle Valve Housing Cap Screw Lock
for 1RL models ending in Washer (4) (for 1RL Models
C1-, C3-, 9D- or D1- 3RL-EU-A40 ending in S1 or S3) 3RL-511
for 1RL models ending in 13G Throttle Ball
S1- or S3- 3RLS-EU-A40 (for 1RL Models ending in S1 or S3) 8U-722
for 1RP models 3RP-EU-A40 13H Throttle Ball Spring (for 1RL
for 1RT models 3RT-EU-A40 Models ending in S1 or S3) 3RP-51
1 Motor Housing 14 Throttle Ball Spring
for 1RA and 1RT models 3RA-EU-B40 for 1RP Models 3RP-51
for 1RL models ending in for 1RT Models 3RT-51
C1-, C3-, 9D- or D1- 3RL-EU-B40 15 Throttle Ball (for 1RP and 1RT Models) 8U-722
for 1RL models ending in 16 Housing Seal (for 1RA and 1RT Models) 3RL-210
S1- or S3- 3RLS-EU-B40 17 Muffler Element
for 1RP models 3RP-EU-B40 for 1RA and 1RT Models 3RA-310
1A Valve Housing Alignment Pin (for for 1RL and 1RP Models (4) 3RL-311
1RL Models ending in S1 or S3) 3RL-15 18 Muffler Assembly
2 Reverse Valve 3RL-329 (for 1RA and 1RT Models) 3RA-A123
2A Reverse Valve Seal WFS182-307 18A Muffler O-Ring 85H-167
3 Reverse Valve Spring SPA102R-515 18B Exhaust Deflector Seal
4 Valve Lock Pin SPA102R-667 (for 1RL and 1RP Models) 3RL-210
5 Retainer Setscrew SPA102R-669 19 Exhaust Deflector (for 1RP Models) 3RP-23
6 Lock Pin Retainer 3RL-668 Exhaust Deflector Assembly
6A Throttle Valve Housing (for 1RL Models) 3RL-A23
(for 1RL Models ending in S1 or S3) 3RL-503 20 Exhaust Deflector 3RL-23
7 Throttle Valve Spring 21 Throttle Lever Pin (2) 3RL-120
for 1RA and 1RT Models 3RA-51 22 Throttle Lever 3RL-273
for 1RL Models 3RL-51 23 Trigger Assembly
8 Throttle Valve (for 1RA and 1RT Models) 3RA-A93
(for 1RA and 1RT Models) 7RAK-302 23A Trigger Pin Seal 8SL-259
9 Valve Seat (for 1RA and 1RT Models) 7RAK-303 24 Back Cap Assembly
10 Valve Seat Support (for 1RA and 1RT Models) 3RA-A202
(for 1RA and 1RT Models) 7RAK-304 24A Back Cap O-Ring AF120-290
11 Throttle Valve Plunger 25 Inlet Screen (for 1RA and 1RT R0A2-61
(for 1RL Models) 3RL-302 Models)
12 Throttle Valve Cap (for 1RL Models) 3RL-266 26 Inlet Bushing
13 Throttle Valve Ball (for 1RL Models) 4U-722 (for 1RA and 1RT Models) 3RA-465
13A Throttle Valve Housing Adapter 27 Inlet Bushing Spacer
(for 1RL Models ending in S1 or S3) 3RL-502 (for 1RA and 1RT Models) 3RA-65
13B Throttle Valve Housing Adapter Seal 28 Inlet Bushing Assembly
(for 1RL Models ending in S1 or S3) PS3-67 (for 1RL and 1RP Models) 3RL-A465
13C Exhaust Deflector Alignment 28A Inlet Screen 3RL-61
Pin (for 1RL Models ending in S1 or S3) 3RL-15 * Warning Label WARNING-28-99
13D Throttle Valve Housing Seal 28B Seat (for 1RL Models ending in S1 or
(for 1RL Models ending in S1 or S3) 3RL-210 S3 and all 1RA and 1RT Models) 3RP-303
13E Throttle Valve Housing Cap Screw (4) 28C Nameplate 04725032
* Not illustrated.
To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each part
indicated by a bullet () for every four tools in service.
Indicates Tune-up Kit part.
16574550_ed1 3
1R Motor and Gearing Exploded Diagram
M, N AND Q PARTS
L RATIO
(Dwg. TPA1858)
4 16574550_ed1
1R Motor and Gearing Parts List
Item Part Description Part Number Item Part Description Part Number
29 Rotor for M ratio 3RLM-108
for 1RP and 1RT Models for N or Q ratios 3RLN-108
and 1RL Models ending in S1 or S3 3RP-53 44 Spindle Retaining Ring 3RL-6
for 1RA Models and 1RL 45 Rotor Pinion (for M, N or P ratios) 3RLM-17
Models ending in C1, C3, 9D or D1 3RL-53 46 Gear Head Spacer (for M, N and Q ratios) 3RL-80
30 Front End Plate 3RL-11 47 Gear Head
31 Rear End Plate for M ratio 3RLM-216
for 1RP, 1RT, 1RA and 1RL for N and P ratios 3RLN-216
Models 3RL-12 for Q ratio 3RLQ-216
for 1RP and 1RTP Models 3RPP-12 48 Gear Head Planet Gear (3)
32 Rotor Bearing (2) DG10-22 for M, N and ratios (14 teeth) 3RLM-10
33 Rear Rotor Bearing Retainer 8SL-305 for Q ratio (19 teeth) 3RLL-10
34 Front Rotor Bearing Retainer 3RL-13 49 Motor Clamp Washer 3RL-207
35 Vane Packet (set of 5 Vanes) 3RL-42-5 50 Clamp Washer Retaining Ring 3RL-208
36 Cylinder 3RL-3 * Suspension Bail
37 Cylinder Dowel 3RL-98 (for Models 1RL and 1RP) 7L-365
38 Rear End Plate Gasket 3RL-739 * Hanger (for Models 1RA and 1RT) 3RA-365
39 Gear Case Assembly * Hand Grip (for Models 1RL and 1RP) 3RP-747
for L ratio 3RLL-A37 * Exhaust Hose (for Models 1RL and 1RP) 3RL-284
for M, N and Q ratios 3RLM-A37 * Tune-up Kit for 1RA and 1RT Models
40 Spindle Bearing R00A-510 (includes illustrated parts 7, 8, 9, 14, 16,
41 Spindle Bearing Retainer 3RL-28 17, 18A, 23A, 24A, 25, 32, 33, 34,
42 Spindle Planet Gear (3) 35 and 38) 3RA-TK2
for L ratio (19 teeth) 3RLL-10 * Tune-up Kit for 1RL and 1RP Models
for M ratio (14 teeth) 3RLM-10 (includes illustrated parts 7, 14, 17, 18B,
for N and Q ratios (17 teeth) 3RLN-10 28A, 32, 33, 34, 35, and 38) 3RL-TK2
43 Spindle * Inlet Bushing (1/4" NPT) (for 1RL
for L ratio 3RLL-108 and 1RP Models only) 3RL-565
* Not illustrated.
To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each part
indicated by a bullet () for every four tools in service.
Indicates Tune-up Kit part.
16574550_ed1 5
1R Adjustable Cushion Clutch and Adjustable Shutoff Clutch Exploded Diagram
NON-ROTATING FINDER
NON-ROTATING FINDER
(Dwg. TPA1859)
6 16574550_ed1
1R Adjustable Cushion Clutch and Adjustable Shutoff Clutch Parts List
16574550_ed1 7
1R Adjustable Cushion Clutch and Direct Drive Attachments Exploded Diagram
NON-ROTATING FINDER
(Dwg. TPA1860)
8 16574550_ed1
1R Adjustable Cushion Clutch and Direct Drive Attachments Parts List
16574550_ed1 9
1R Clutches For 5/16 Hexagon Shank European Style Bits Exploded Diagram
(Dwg. TPA1861)
10 16574550_ed1
1R Clutches For 5/16 Hexagon Shank European Style Bits Parts List
16574550_ed1 11
Clutch Spring Selection Chart
12 16574550_ed1
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that they can be
recycled.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.
Related Documentation
For additional information refer to:
16574550_ed1 13
Notes
14 16574550_ed1
Notes
16574550_ed1 15
www.irtools.com