Professional Documents
Culture Documents
PSR E403 e PDF
PSR E403 e PDF
CONTENTS
SPECIFICATIONS.............................................. 3/4
CIRCUIT BOARD LAYOUT & WIRING
............................................. 5
PANEL LAYOUT.................................... 6
DISASSEMBLY PROCEDURE.............................. 8
LSI PIN DESCRIPTIONLSI............................. 14
IC BLOCK DIAGRAMIC.................................. 17
CIRCUIT BOARDS....................................... 18
TEST PROGRAM............................ 26/29
BACKUP & INITIALIZATION
...................................... 32/33
MIDI IMPLEMENTATION CHART ......................................... 34
MIDI DATA FORMAT ............................................................. 35
PARTS LIST
BLOCK DIAGRAM
OVERALL CIRCUIT DIAGRAM
PK 001752
20060200-000000
HAMAMATSU, JAPAN
Copyright (c) Yamaha Corporation. All rights reserved. PDF 06.04
PSR-E403
IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic
service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the use rs,
and have therefore not been restated.
WARNING : Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components and failure of the product to perform as specified. For these reasons, we advise
all Yamaha product owners that all service required should be performed by an authorized Yamaha Retailer or the
appointed service representative.
IMPORTANT : This presentation or sale of this manual to any individual or firm does not constitute authorization certification,
recognition of any applicable technical capabilities, or establish a principal-agent relationship of any form.
The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and service
departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in
specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributors Service Division.
WARNING : Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated
by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus.)
IMPORTANT : Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/
flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.
WARNING
Components having special characteristics are marked and must be replaced with parts having specification equal to those
originally installed.
SAVING DATA
Saving and backing up your data
The panel settings and some other types of data is lost when you
turn off the power to the instrument. Save the data to the
Registration Memory.
Saved data may be lost due to malfunction or incorrect operation.
Save important data to an external device such as a computer.
Backing up the external media
To protect against data loss through media damage, we
recommend that you save your important data onto two external
media.
2
PSR-E403
SPECIFICATIONS
Keyboards Effects
61 standard-size keys (C1C6), with Touch Response. Reverb: 9 types
Display Chorus: 4 types
LCD display (backlit) Harmony: 26 types
Arpeggio: 50 types
Setup
STANDBY/ON
Song
MASTER VOLUME: MINMAX 30 Preset Songs + 5 User Songs + Accessory CD-ROM
Songs (70)
Panel Controls Song Clear, Track Clear
SONG, VOICE, STYLE, EASY SONG ARRANGER, Song Volume
PERFORMANCE ASSISTANT ON/OFF, ARPEGGIO ON/ Song Control: , A-B REPEAT, PAUSE, REW, FF,
OFF, LESSON L/R, LESSON START, METRONOME ON/ START/STOP
OFF, PORTABLE GRAND, DEMO, FUNCTION, MUSIC
DATABASE, TOUCH ON/OFF, HARMONY ON/OFF,
Performance assistant technology
DUAL ON/OFF, SPLIT ON/OFF, TEMPO/TAP, [0][9], [+], Recording
[-], CATEGORY, Dial, ASSIGN, (ACMP ON/OFF), A-B Song
REPEAT (SYNC STOP), PAUSE (SYNC START), START/ User Song: 5 Songs
STOP, REW (INTRO/ENDING/rit.), FF (MAIN/AUTO Recording Tracks: 1, 2, 3, 4, 5, STYLE
FILL), REGIST MEMORY ([ ] (MEMORY/BANK), [1], [2]), MIDI
SONG MEMORY (REC, [1][5], [A]) Local On/Off Initial Send External Clock
Realtime Control Keyboard Out Style Out Song Out
Pitch Bend Wheel Auxiliary jacks
Nobs A, B PHONES/OUTPUT, DC IN 12V, USB, SUSTAIN
A: Cutoff, Reverb, Attack, Style Cutoff, Style Tempo
B: Resonance, Chorus, Release, Style Resonance Amplifier
2.5W + 2.5W
Voice
116 panel voices + 12 drum/SFX kits + 361 XGlite voices Speakers
+ 15 arpeggio voices 12cm x 2 + 3cm x 2
Polyphony: 32 Power Consumption
DUAL 10W
SPLIT Power Supply
Style Adaptor: Yamaha PA-3C AC power adaptor
155 Preset Styles + 1 User Style File Batteries: Six D size, R20P (LR20) or equivalent batteries
Style Control: ACMP ON/OFF, SYNC STOP, Dimensions (W x D x H)
SYNC START, START/STOP, 952 x 388 x 146 mm (37-1/2" x 15-1/4" x 5-3/4")
INTRO/ENDING/rit., MAIN/AUTO FILL
Fingering: Multi Finger Weight
Style Volume 7.0kg (15 lbs. 7 oz.) (not including batteries)
Music Database Supplied Accessories
256 Music Rest
Accessory CD-ROM
Education Feature
Owners Manual
Dictionary
Lesson 13, Repeat & Learn
Optional Accessories
Registration Memory
AC Power Adaptor: PA-3C
8 banks x 2 types
Footswitch: FC4/FC5
Function Keyboard Stand: L-2C/L-2L
VOLUME: Style Volume, Song Volume Headphones: HPE-150
OVERALL: Tuning, Transpose, Split Point, Touch Sensi-
tivity, Pitch Bend Range
MAIN VOICE: Volume, Octave, Pan, Reverb Level,
Chorus Level, Attack Time, Release Time,
Filter Cutoff, Filter Resonance
DUAL VOICE: Voice, Volume, Octave, Pan, Reverb Level,
Chorus Level, Attack Time, Release Time,
Filter Cutoff, Filter Resonance
SPLIT VOICE: Voice, Volume, Octave, Pan, Reverb Level,
Chorus Level, Attack Time, Release Time,
Filter Cutoff, Filter Resonance
EFFECT: Reverb Type, Chorus Type, Master EQ Type
HARMONY: Harmony Type, Harmony Volume
ARPEGGIO: Arpeggio Type, Arpeggio Velocity
SFF Load: Style File Load
PC: PC Mode
MIDI: Local On/Off, External Clock, Initial Send,
Keyboard Out, Style Out, Song Out
METRONOME: Time Signature Numerator, Time Signature
Denominator, Metronome Volume
LESSON: Lesson Track (R), Lesson Track (L)
UTILITY: Grade, Demo Cancel
3
PSR-E403
:
61 :
(C1C6: ) SFF :
PC : PC
() MIDI : /
[/](STANDBY/ON) : 1
(MASTERVOLUME) : RL
: /
[/][/]
[/][/][] 9
[][L/R][/ 4
][/][] 26
[][/] 50
[][][]
[][][ ]/[ ]
305
[0][9][][][][ ]/[/] CD-ROM(70)
[A-B]/[][]/[
][]/[//rit.]
[]/[/][/]
[/]([](/ A-B
)[1][2])([][1][5][A]) /
A/B
A
5
B 12345
MIDI
116 12/SFX /
361 XGlite15
(32)
USBSUSTAINPHONES/OUTPUTDC IN12V
1551 2.5W2.5W
/
/// 12cm23cm2
/
PA-3C
1(1.5V)6
256
23
13 12W
(mm)
82 952388146
: 7.0kg()
:
: PA-3C
CD-ROM
()
: L-2C/L-2L
SCC-35
HPE-150/HPE-30
FC4/FC5
:
:
EQ
4
PSR-E403
TWL TWR
!0
q
DMLCD
u !3
!7 -2
!1 !8 !5
!7 -1
w e
t
t
PANEL LAYOUT
Front Panel A
q e u !2
r i o !3 GrandPno
!6
t !0 !4 001 001
w
y !1 !5
@3 @4 @5 @6 @7 @8 @9 #0 #1
#4
A'
Front Panel
q [STANDBY/ON] switch q [STANDBY/ON] ( / )
w [MASTER VOLUME] control w [MASTER VOLUME] ()
e [TOUCH ON/OFF] button e [TOUCH ON/OFF] ( / )
r [HARMONY ON/OFF] button r [HARMONY ON/OFF] ( / )
t [DUAL ON/OFF] button t [DUAL ON/OFF] ( / )
y [SPLIT ON/OFF] button y [SPLIT ON/OFF] ( / )
u [DEMO] button u [DEMO] ()
i LESSON [START] button i [START] ()
o LESSON [L/R] button o [L/R]
!0 [ARPEGGIO ON/OFF] button !0 [ARPEGGIO ON/OFF] ( / )
!1 [PERFORMANCE ASSISTANT ON/OFF] button !1 [PERFORMANCE ASSISTANT ON/OFF]
!2 [FUNCTION] button ( / )
!3 [MUSIC DATABASE] button !2 [FUNCTION] ()
!4 [METRONOME ON/OFF] button !3 [MUSIC DATABASE] ()
!5 [PORTABLE GRAND] button !4 [METRONOME ON/OFF] ( /)
!6 Dial !5 [PORTABLE GRAND] ()
!7 CATEGORY [ ] and [ ] buttons !6
!8 [SONG] button !7 [ ] [ ]
!9 [EASY SONG ARRANGER] button !8 [SONG] ()
@0 [STYLE] button !9 [EASY SONG ARRANGER] ()
@0 [STYLE] ()
6
PSR-E403
!8
!7 !9
!6 @2
@0
@1
#2 #3
Rear Panel
#5 #6 #7 #8
A'
Rear Panel
#5 [USB] terminal #5 [USB]
#6 [SUSTAIN] jack #6 [SUSTAIN]
#7 [PHONES/OUTPUT] jack #7 [PHONES/OUTPUT]
#8 [DC IN 12V] jack #8 [DC IN 12V]
7
PSR-E403
DISASSEMBLY PROCEDURE
Caution: Be sure to attach the removed filament tape just as it was before removal.
Fig.11
2. Spring Terminal 2. : 2
(Time required: About 2 minutes) 2-1 Ass'y 1
2-1 Remove the lower case assembly. (See procedure 1.) 2-2 ()()BAT
2-2 Remove the connector assemblies BAT (red/black) () 2
soldered to the spring terminals (+) and (). (Fig.2) 2-3 Ass'y 2 (A)
2-3 Unhook two (2) each hooks (A) at the bottom of the 3
lower case assembly and pull out the respective
spring terminals. (Fig.3)
Fig.33
Fig.22
8
PSR-E403
TWR TWL
[210H] [210G]
Connector PNR [210F] [210E] [210E] [210A] [210J] PNPB
assembly TWR LCD unit [210B] x 15 PNPB Connector
(TWR) () assembly TWL [210K]
(TWL)
Wheel assembly
(Ass'y)
Volume knob
(V) Push knob
()
PNJKSTB
(STB)
Fig.55 Fig.66
9
PSR-E403
LCD
() Conductor side ()
Back-lit assembly
(Ass'y) Rubber connector
()
Rubber connector Fig.88
()
LCD holder
(LCD) 3 4 5 6
DMLCD
DMLCD
[50] 7 8
1 2
[50]: Bind Head Tapping Screw-B (BBIND)
3.0X12 MFZN2W3 (WE987400)
Fig.77 Fig.99
10. PNPB Circuit Board and Wheel Assembly 10. PNPB Ass'y
(Time required: About 4 minutes) : 4
10-1 Pull out the two (2) rotary knobs for A and B from 10-1 A
B
the control panel. (Fig.1) 2 1
10-2 Remove the lower case assembly. (See procedure 1.) 10-2 Ass'y 1
10-3 Remove the six (6) screws marked [210J] and two 10-3 [210J] 6 [210K] 2
(2) screws marked [210K]. The PNPB circuit board Ass'yPNPB
can then be removed with the wheel assembly. 4
(Fig.4) 10-4 PNPB Ass'y
10-4 Pull out the wheel assembly from the PNPB circuit 11
board. (Fig.11)
Encoder knob
() PNPB Wheel assembly
(Ass'y)
Fig.1010 Fig.1111
11
PSR-E403
[200C]
C1 C2 B2 C3 B3 C4 C5 C6
12
PSR-E403
Rubber contact ()
Hook ()
Photo 11 Photo 22
61L 61H
9 10 11 12 6 7 8
2 3 4 5 6 7 8 1 1 3 4 5 2
Fig.1414
13
PSR-E403
14
PSR-E403
15
PSR-E403
16
PSR-E403
IC BLOCK DIAGRAMIC
SN74LV32APWR (X5647A00) SN74LV138APWR (X7284A00) BA4510F-E2 (X7300A00)
DMLCD: IC207 DMLCD: IC401, 402 DMLCD: IC502
Quad 2 Input OR 3 to 8 Demultiplexer Dual Operational Amplifier
2Y 6 9 3A 6 G1 Y4 11
G1 Y4
GND 7 8 3Y Output Y7 7 Y7 Y5 10 Y5
Y6
GND 8 9 Y6
BA5417 (XV771A00)
PNJKSTB(PNJK): IC551
POWER AMP
T.S.D
ST. BY
BS BS FILTER
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
(N.C.)
BS2
OUT2
Vcc
OUT1
BS1
POWER-GND
STBY
FILTER
NF1
IN1
IN2
NF2
PRE-GND1
PRE-GND2
17
PSR-E403
CIRCUIT BOARDS
DMLCD Circuit Board (X7174C0) ...................................................................................... 18/19
ENC (VR 3/4) Circuit Board (X7175B0) ................................................................................... 24
MVR (VR 2/4) Circuit Board (X7175B0) .................................................................................. 20
PNJKSTB(PNJK) (PNAM 1/6, 3/6) Circuit Board (X7173C0) ................................ 20/21/22/23
PNJKSTB(STB) (PNAM 4/6) Circuit Board (X7173C0) .......................................................... 20
PNPB (VR 1/4, 4/4) Circuit Board (X7175B0) ......................................................................... 24
PNR (PNAM 2/6) Circuit Board (X7173C0) ....................................................................... 22/23
TWL (PNAM 5/6, 6/6) Circuit Board (X7173C0) ..................................................................... 21
TWR (PNAM 5/6, 6/6) Circuit Board (X7173C0) ..................................................................... 21
61H Circuit Board (X2335C0) .................................................................................................. 25
61L Circuit Board (X2336B0) ................................................................................................... 25
Note : See parts list for details of circuit board component parts.
:
to PNR(PNAM 2/6)-CN751
Coil (WH469300)
L803
to PNJKSTB(PNJK)
(PNAM 1/6)-CN156
R817R818
WH469300
1 2
1 3 4 5
to 61H-CN1 to 61L-CN5 to 61H-CN2
not installed to PNJKSTB(PNJK)
(PNAM 3/6)-CN851(3pin5pin)
to PNJKSTB(PNJK)
(PNAM 3/6)-CN851(1pin)
Component side
DMLCD: 2NA-WG23540 1
18
PSR-E403
Pattern side
DMLCD: 2NA-WG23540 1
19
PSR-E403
to TWL
(Ass'y)
(PNAM 5/6, 6/6)
to Back-lit assembly
to DMLCD-CN101
to PNJKSTB(PNJK)
(PNAM 3/6)-CN152
to WOOFER L
(())
Component side
PNJKSTB(STB) (PNAM 4/6) Circuit Board MVR (VR 2/4) Circuit Board
STANDBY/ ON
MASTER
VOLUME
Component side
Component side
20
PSR-E403
FF/ /
REW/ PAUSE/ A-B REPEAT/
TEMPO/TAP START/STOP MAIN ACMP
INTRO ENDING SYNC START SYNC STOP
AUTO FILL ON/OFF
PERFORMANCE SPLIT
PORTABLE ASSISTANT ON/OFF
GRAND ON/OFF
TOUCH
FUNCTION DEMO ON/OFF
/PC
Pattern side
Pattern side
PNJKSTB(PNJK): 2NA-WG23530
TWL, TWR: 2NA-WG23530
21
PSR-E403
VOICE/
SONG
to ENC (VR3/4) MELODY
-CN764 VOICE
STYLE
EASY
SONG
ARRANGER
SONG
Component side
to DMLCD-CN803
DC IN 12V PHONES/ SUSTAIN USB (2pin)
OUTPUT
Component side
PNR: 2NA-WG23530
PNJKSTB(PNJK): 2NA-WG23530
22
PSR-E403
SONG SONG SONG SONG SONG SONG SONG REGIST REGIST REGIST
MEMORY (A) MEMORY (3) MEMORY (2) MEMORY (1) MEMORY MEMORY (0)
CLEAR/STYLE MEMORY (5) MEMORY (4) LEFT RIGHT REC MEMORY (2) MEMORY (1) BANK/MEMORY
VOICE/
SONG
MELODY
+ 0 - VOICE
/YES /RESET /NO
CATEGORY
STYLE (-)
9 8 7
EASY
SONG
ARRANGER
6 5 4
SONG CATEGORY
(+)
3 2 1
Pattern side
Pattern Pattern
R8
cut cut
17
R8
Fix by bond
Pattern side
PNR: 2NA-WG23530
PNJKSTB(PNJK): 2NA-WG23530
23
PSR-E403
to DMLCD-CN801
ASSIGN
A B
Component side
Component side
Dial
Component side
PNPB: 2NA-WG23570
ENC: 2NA-WG23570
24
PSR-E403
A Component side
B
B
to DMLCD-CN402 to 61H-CN3
B
Component side
61H: 2NAKB-V869540
61L: 2NAKB-V869520
25
PSR-E403
TEST PROGRAM
* If the test number 47 Factory Set is executed, the data already set will be lost.
1 Preparations
1) Use an AC adaptor PA-3C.
2) Measuring device: Frequency counter, which can detect thousandth value or more, Level meter (with JIS-C filter), Oscilloscope
Note: Use a stereo plug and connect a load resistor of 33 to the [PHONES/OUTPUT] jack for measurement unless
otherwise specified. Input impedance of the measuring device should be 1 M or more.
3) Jig: Foot switch (FC-4 or FC-5), USB cable
C#2 G#2
F2
3 Test procedure
1) When the test program is started, TEST will be displayed on the LCD.
2) Press the [] or [+] button of the number buttons to select a test program item.
3) Press the [START/STOP] button to execute the test.
If the result is OK or test item is completed, press the [START/STOP] button again to return to the item selection display.
Press the [] or [+] button of the number buttons to select the next test item.
A cursor (_) is shown below the first character of the item for which the test results are OK.
If the result is NG, press the lowest key (white key C1) to return to the item selection display.
26
PSR-E403
Other Tests
Popping Noise Check
Connect an oscilloscope to the L/R of the [PHONES/OUTPUT] jack and turn on and then off the [STANDBY/ON] switch. Make
sure that popping noise level is 1.0 Vp-p or less, and that no abnormal sound or popping noise is output from the speakers.
27
PSR-E403
28
PSR-E403
47 Factory Set
1
1) AC PA-3C
2) : 3 (JIS-C )
[PHONES/OUTPUT]33
1 M
3) :FC-4 FC-5
USB
2
[C#2][F2][G#2]
[STANDBY / ON]
C#2 G#2
F2
3
1LCD TEST
2[-][+]
3[START/STOP]
OK[START/STOP]
[-] [+]
OK
NG C1
4 (dBu=dBm)
No LCD
1 Version ROM
001 LCD Prog USB : Version
2 Rom Chk1 CPU ROM
002 LCD Rom OK
3 Ram Chk1 CPU RAM
003 LCD Ram OK
6 FRomChk1 CPU FROM
006 LCD FRom OK
11 TG1 Chk C2 G4 32
011 TG1 End
13 Pit Chk
013 [PHONES/OUTPUT] L R
440.14 Hz 0.22 Hz
14 Output R [PHONES/OUTPUT] L, R JIS-C
014 33
[MASTER VOLUME]
PHONES L: 55.0 dBu PHONES R: 5.0 dBu 2 dB
15 Output L [PHONES/OUTPUT] L, R JIS-C
015 33
[MASTER VOLUME]
PHONES L: 5.0 dBu 2 dB PHONES R: 55.0 dBu
29
PSR-E403
No LCD
20 SW Chk LED LCD
020 SW
LED LED
LCD SW OK
Dial UpDwn
Knob Lo
Hi C
C1
21 A. LedChk LED
021
28 LCD On LCD
028
29 LCD Off LCD
029
31 PD1 Chk [SUSTAIN]FC-4 FC-5
031 [START/STOP]On C3
Off C4
LCD PD1 OK
33 PB Chk [PITCH BEND]DW C3
033 UP C4 LCD PB OK
37 MIDI Chk [USB] Host PC USB
PC
037
C4 LCD MIDI OK
41 Rom Chk2 CPU ROM
041 LCD Rom OK
15
42 Ram Chk2 CPU RAM
042 LCD Ram OK
45 FRomChk2 CPU FROM
045 LCD FRom OK
30
47 Factory
047 LCD Fact
LCD Fact End
48 TestExit
048
[PHONES/OUTPUT] L, R
[STANDBY/ON]
1.0Vp-p
[PHONES/OUTPUT] L, R JIS-C
PHONES L, R: -78dBu
30
PSR-E403
SW
SW
1 Dial Up C2
2 Dial Down C#2
3 TOUCH Touch D2
4 HARMONY Harmony D#2
5 DUAL Dual E2
6 SPLIT Split F2
7 DEMO/PC Demo F#2
8 LESSON START LessonSt G2
9 LESSON L/R L/R G#2
10 ARPEGGIO Arpeggio A2
11 PERFORMANCE ASSISTANT P.A.T. A#2
12 FUNCTION Function B2
13 MUSIC DATABASE M.D.B. C3
14 METRONOME Metro C#3
15 PORTABLE GRAND Piano D3
16 CATEGORY Catego + D#3
17 CATEGORY Catego E3
18 SONG Song F3
19 EASY SONG ARRANGER E.S.A. F#3
20 STYLE Style G3
21 VOICE Voice G#3
22 TENKEY 1 Tenkey 1 A3
23 TENKEY 2 Tenkey 2 A#3
24 TENKEY 3 Tenkey 3 B3
25 TENKEY 4 Tenkey 4 C4
26 TENKEY 5 Tenkey 5 C#4
27 TENKEY 6 Tenkey 6 D4
28 TENKEY 7 Tenkey 7 D#4
29 TENKEY 8 Tenkey 8 E4
30 TENKEY 9 Tenkey 9 F4
31 TENKEY Tenkey F#4
32 TENKEY 0 Tenkey 0 G4
33 TENKEY + Tenkey + G#4
34 ASSIGN Assign A4
35 ACMP ACMP A#4
36 SYNC STOP S. Stop B4
37 SYNC START S. Start C5
38 INTRO/ENDING/rit. Intro C#5
39 MAIN/AUTO FILL Main/Fil D5
40 START/STOP Str/Stp D#5
41 TEMPO/TAP Temp/TAP E5
42 BANK/MEMORY Memory F5
43 REGIST MEMORY 1 Regist 1 F#5
44 REGIST MEMORY 2 Regist 2 G5
45 SONG MEMORY REC Song REC G#5
46 SONG MEMORY (1) RIGHT Song 1 A5
47 SONG MEMORY (2) LEFT Song 2 A#5
48 SONG MEMORY (3) Song 3 B5
49 SONG MEMORY (4) Song 4 C6
50 SONG MEMORY (5) Song 5 C#6
51 SONG MEMORY (A) CLEAR/STYLE Song A D6
52 A Knob1 Lo
53 A Knob1 Hi D#6
54 A Knob1 C
55 B Knob2 Lo
56 B Knob2 Hi E6
57 B Knob2 C
31
PSR-E403
Backup
The following settings are always backed up, and are maintained even when the power is turned off.
If you want to initialize the settings, use the Initialize operation as explained below.
Initialization
This function erases all backup data in the instruments flash memory and restores the initial default settings.
The following initialization procedures are provided.
<Backup Clear>
To clear data backed up to the internal flash memory (DM circuit board:
IC206)panel user setting, registration memory, user songs, style file 156
turn the power on by pressing the [STANDBY/ON] switch while holding the
highest white key on the keyboard.
BackUp Clr is displayed on the LCD, and the backed up data will be erased
and the default values restored.
<Flash Clear>
To clear song data and style files that have been transferred to the internal
flash memory (DM circuit board: IC206) from a computer, turn the power
on by pressing the [STANDBY/ON] switch while simultaneously holding
the highest white key on the keyboard and the three highest black keys.
Flash Clr is displayed on the LCD.
When you execute the Flash Clear operation, song data you have purchased will also be cleared. Be sure to save data you
want to keep to a computer.
32
PSR-E403
PSR-E403
/ (ON/OFF)
EQ
< >
DMLCD : IC206
[STANDBY /ON]
LCD BackUp Clr
< >
D M L C D :
IC206
3
[STANDBY/ON] LCD Flash
Clr
33
PSR-E403
Default 3 3
Mode Messages x x
Altered ************** x
After Key's x x
Touch Ch's x x
System Exclusive o o
: Song Pos. x x
Common : Song Sel. x x
: Tune x x
System : Clock o o
Real Time: Commands o o
Aux :All Sound OFF x o(120,126,127)
:Reset All Cntrls x o(121)
:Local ON/OFF x o(122)
:All Notes OFF x o(123-125)
Mes- :Active Sense o o
sages:Reset x x
*1 Messages for these control change numbers cannot be transmitted from the
instrument itself. However, they may be transmitted when playing the
accompaniment, song or using the Harmony effect.
Effect map
* When a Type LSB value is received that corresponds to no effect type, a value corresponding to the effect type (coming
the closest to the specified value) is automatically set.
* The numbers in parentheses in front of the Effect Type names correspond to the number indicated in the display.
REVERB
TYPE TYPE LSB
MSB 00 01 02 08 16 17 18 19 20
000 No Effect
001 (01)Hall1 (02)Hall2 (03)Hall3
002 Room (04)Room1 (05)Room2
003 Stage (06)Stage1 (07)Stage2
004 Plate (08)Plate1 (09)Plate2
005...127 No Effect
CHORUS
TYPE TYPE LSB
MSB 00 01 02 08 16 17 18 19 20
000...063 No Effect
064 Thru
065 Chorus (02)Chorus2
066 Celeste (01)Chorus1
067 Flanger (03)Flanger1 (04)Flanger2
068...127 No Effect
35
PARTS LIST
CONTENTS
OVERALL ASSEMBLY.............................................................. 2
LOWER CASE ASSEMBLYAss y.......................................... 5
KEYBOARD ASSEMBLY16N-C61................................................ 7
ELECTRICAL PARTS ..................................................... 8 13
WARNING
Components having special characteristics are marked and must be replaced with parts having
specification equal to those originally installed.
OVERALL ASSEMBLY
Upper case assembly
Ass'y 170
10d 470
10d
10e
450
460
Wheel assembly 20 410
Ass'y
50 10e
260 270
10d
30 10c
10e
210
240
160 10d
260a 10d
10e
290
260b 110 10a
80 100
210
390 90
190 290
240 180 180b L130
210 20
210 210
L20 130
50
70
L30 60 40
290 210
290 L70 L10
210
180 180a
210 L40 120
L110 210
LCD Unit 280
L60 180 180a
L50
290 210
250
285 210
185
210
360 285
380b
380a
380c
380
380d 370
Battery cover assembly
Ass'y
2
PSR-E403
3
PSR-E403
ACCESSORIES
* WH249100 Music Rest
* X7226A00 CD-ROM J
* X7225A00 CD-ROM U,C,W,O
V8028600 AC Adaptor PA-3C J J
* WF322000 AC Adaptor PA-3C CHN O
* WG250500 Japanese Guide Sheet J
* WG249900 Chinese Guide Sheet O
4
PSR-E403
200
210
170
220
200
30
50 200
20
Keyboard assembly: See page 7. 40
16N-C61
L30
L20 L30
L60
L20
L30 10
L70
170
90
80 110
5
PSR-E403
6
PSR-E403
KEYBOARD ASSEMBLY16N-C61
40
200
190
200
50
40
180
M30 10
20
160
200
M50 M20 20
150
MK Circuit board assembly
MKAss'y)
30
170
7
PSR-E403
ELECTRICAL PARTS
8
PSR-E403
9
PSR-E403
10
PSR-E403
11
PSR-E403
12
PSR-E403
* WF817100 LCD
13
A B C D E F G H
CN553 (2P)
(LED:4PCS)
61L (C1~B3) 61H (C4~C6) + SPEAKER L
CN4 (12P)
CN3 (12P)
LD751~754 (PNAM1/6)
PA2-PA5 WOOFER
CN752 (3P)
CN764 (3P)
PC0-5,PD0-5 PC0-5,PD0-5
EN/A -
EN/A, EN/B 4 12cm
EN/B
EN/A, EN/B
SW1-36
PA2-PA5
SW37-61 EC761
PB0-PB7
TWL
PF0
(PNAM 5/6,6/6)
B07-B11
B01-B07
CN554 (2P)
CN751 (16P)
- SPEAKER L
CN5 (7P) CN2 (5P) CN1 (12P) CN701 (16P) + TWEETER 2
CN753 (11P)
CN702 (11P)
PF0
EN/A, EN/B
PB0-PB7 PB0-PB7
SW MATRIX
CN402 (7P) CN403 (5P) CN401 (12P) ( SW 20PCS )
PA0-PA2 PA0-PA2
+3.3D SW701~719,721
DMLCD +5D TWR
PNJKSTB
B01-B08
B09-B11
(PNJK) (PNAM5/6,6/6)
PC0-5,PD0-5
CN157 (2P)
CN555 (2P)
PA0-PA7 33LCD
TR701~704 VDD LCD (PNAM3/6) +
PA0-PA7 DRIVER SPEAKER R
DECODER 16 16 DECODER LED DRIVER IC601 DISPLAY TWEETER
74LV138A VCC VCC 74LV138A PF0 RS, ENB -
TR705 (80P) BACK LIGHT
IC401 (16P) IC402 (16P) 36,38
LED:2PCS( Blue ) REGULATOR +6V
+6A
PE3-6
CN556 (2P)
REGULATOR +5V IC151 (3P)
2 1
+ SPEAKER R 3
+5D IC101 (3P) WOOFER
117
+2.5V VDD PB0-PB7 +5A REGULATOR +3.3V
15,46,89,119 - 4 12cm
PA0-PA7 +3.3D IC102 (3P) POWER AMP +V
IOVDD 24,47,66,90,120 RS, ENB
+3.3D 37,121 +6A
REGULATOR +2.5V +6A BA5417
CPU 5
IC103 (3P)
CN156 (13P)
+2.5V L
CN101 (13P)
+V L
+5A +6A +V 2 L
PHONES /
+5D L 12 R
SWL01(T)
CN153 (11P)
CN152 (11P)
IC302 (5P) PC7
14 8 IC551 (15P) R OUTPUT
5 YMW767-VTZ 32 5 R
DAC 11 L 11 R
RESET 4 SD0 3 12 2,3 BUFFER/ 1 L L 4 JK551
16 40 24bit
+3.6V 50ms LPF OTL
IC301 (128P) 42~44
BCLK 1,2,4 9 R 5,6 7 R R 2.5W x 2
41 WCLK IC501 10 IC502(8P) +V +V
X301 RXD1 38 EN/A SYSCK (16P)
7 DC IN 12V
SCLK1 39 EN/B fC=27KHz AC adaptor 4
16.9344MHz 12
R
R
L
L
+3.3D
Crystal SMD-49 13
PA-3B/PA-3C/PA-32
FTolerance100PPM
/UWRN, /LWRN, /CASN CN551 (5P)
AGND
CN154 (4P) JK151
34~36 32 67,68,123 2
ADC
CN151 (3P)
BCLK PITBEND1
WCLK
1,10 8bit PITBEND2 -
RXD0
PC7 CN552 (5P) CN155 (4P) BATTERY
TXD0 MA01-22
SDI
IC801 PITBEND3 +
1.5V x 6
R
L
IRQ0 MD00-15 9 (10P) 7 MVR PNJKSTB
R
L
MA01-22 MA01-18 MA01-09 (VR 2/4) (STB) "D"size,SUM-1,R-20 or
29,51,52 8 MD00-15 MD00-15 MD00-15 +3.3D VR551 (PNAM 4/6) SW151 excluding batteries
A5k STANDBY/ON
CPU 64M ROM FLASH DRAM /UCAS 1,2,4 14 VBUS, D+, D-
MASTER VOLUME USB
USB ROM 4M /LCAS OR
PROG./ 8,11
IC802 4M 74LV32A PNPB
6.0MHz 12 WAVE 31,32 JK852
Crystal SMD-49
13
(64P) IC203 IC206 IC204 IC207 (14P) SW751 ASSIGN A B
(VR 4/4) 5
F Tolerance100PPM
6,25,26,30 1,2,4,63,64 (48P) (48P) (44P) AN7
X801 PITCH BEND
CN761 (10P)
CN801 (10P)
CN762 (3P)
CN763 (3P)
VBUS 37 37 1,6,22 PITBEND1
D+ AN1 VR752 VR751 PITBEND2
AN2 +3.3D
D- AN5 AN2 AN0 AN3 AN1 PITBEND3
DGND JK851
AN7 AN3
AN5 RESET PNPB
(VR 1/4) VR761 CN851 (9P)
CN802 (9P)
PSR-E403
PSR-E403 OVERALL CIRCUIT DIAGRAM (DMLCD, ENC, MVR, PNJK, PNPB, PNR, STB, TWL, TWR, 61H, 61L)
1 xx 1
XX
XX
XX
XX
SONG SONG
XX STYLE MEMORY(A) CATEGORY CATEGORY
CLEAR (+) (-)
A XX MEMORY /STYLE
to E-8
2 2
EASY
SONG
STYLE VOICE/
SONG
1 2 3 4 5
XX
SUSTAIN
ARRANGER MEMORY
XX
VOICE
XX
LCD XX 6 7 8 9 - 0 + REGIST MEMORY
/NO /RESET /YES BANK (0)
DRIVER MEMORY SPEAKER R
WOOFER
XX
3 XX SPEAKER R 3
XX
28CC1-2001002840 1
XX
XX
XX
XX PHONES/OUTPUT
XX
28CC1-2001002840 2
4 FLASH ROM 4M 4
DRAM 4M
XX
SYSTEM RESET
CPU DC IN 12V
(SWL01T) XX
REGULATOR +5V
28CC1-2001002840 2
5 5
REGULATOR +3.3V
XX
PNJKSTB
(PNJK)
CPU
(USB) (PNAM 1/6)
TOUCH HARMONY DUAL SPLIT DEMO LESSON LESSON ARPEGGIO
ON/OFF ON/OFF ON/OFF ON/OFF /PC START L/R ON/OFF
OR
REGULATOR +2.5V
OP AMP
DAC
DECODER DECODER
POWER AMP. 5W 2CH
XX
XX
7 7
XX
A OP AMP
XX
from J-2
BYPASS CAPACITORS
28CC1-2001002838 2
8 8
xx
PNJKSTB
(PNJK)
(PNAM 4/6)
ENC
(VR 3/4) REGULATOR +6V
STANDBY/ON
28CC1-2001002840 2
CATEGORY
9 9
61H
(C4~C6) 28CC1-2001002843
SPEAKER L
PNPB MVR WOOFER
(VR 4/4) PITCH BEND (VR 2/4)
to LCD BACK/LIGHT
SPEAKER L
MASTER TWEETER
28CC1-2001002843 VOLUME XX
28CC1-2001002840 2 TWL
(PNAM 5/6,6/6)
10 10
28CC1-2001002840 2
28CC1-8822437 28CC1-2001002843
PNPB
RH5RZ25CA-T1-F (X3679A00) BA33BC0FP (X5889A00) RH5RZ50CA-T1-F (X6959A00) BA60BC0T (X6980A00)
(VR 1/4) REGULATOR +2.5V REGULATOR +3.3V REGULATOR +5V REGULATOR +6V
DMLCD: IC103 DMLCD: IC102 DMLCD: IC101 PNJK: IC151
B
61L : Ceramic Capacitor
2 : Mylar Capacitor
(C1~B3) : Semiconductive Ceramic Capacitor
1 1 : Metal Film Resistor
2 1 2
3 1. GND 1. INPUT 3 1. GND
A 3 1: INPUT XX : Not installed
2. INPUT 2. GND 2. INPUT 1 2: GND
2
11 3. OUTPUT 3. OUTPUT 3. OUTPUT 3 3: OUTPUT 11
Note1 : See parts list for details of circuit board component parts.
2SC2412K(VV556400) 2SA1037AK(VV556500) DTC123JKA (VY677600)
TRANSISTOR TRANSISTOR DIGITAL TRANSISTOR Note2 : The large numbers with function are indicated the first digit of each parts
DMLCD: TR802 DMLCD: TR801 DMLCD: TR705 reference number.
ASSIGN 3 3 3
1:
2:
2
1
2 1 2 1 WARNING
R1 OUT
3 3 IN Components having special characteristics are marked and must be replaced with parts having
1: GND
2 1: EMITTER 2 1: EMITTER
R2 specifications equel to those originally installed.
GND 2: IN
28CC1-2001002843 2: BASE 2: BASE IN OUT
28CC1-8822436 1 3: COLLECTOR 1 3: COLLECTOR GND
3: OUT
12 12
PSR-E403 PSR-E403
A B C D E F G H I J K L M N O P Q