Professional Documents
Culture Documents
PIPE Specification
PIPE Specification
PIPES SPECIFICATION
MATERIALS OF CONSTRUCTION
ASTM A-
65 deg C / 1/8 6 B PE/SMLS
Utilities and 106
17 barg
Process 8 28 API 5L B PE/SAW
(Carbon Steel) 100 deg C / 1/8 ASTM A-
B PE/SMLS
45.5 barg 24 106
Utilities and
Process 150 deg C / 1/8 ASTM A-
TP304 PE/SMLS
(Stainless 70 barg 12 312
Steel)
Solid additive,
PE/EFW
polymer+gas,
120 deg C / ASTM A- (SMLS
polymer 2 24 TP304
11.5 barg 312 for below
powder/pellets,
2)
Polymer slurry-
220 deg C / 1/8 ASTM A-
polymer+gas- TP304 SMLS
25 barg 12 312
liquid additive
14 ASTM A-
TP304 EFW
28 312
PE/SMLS
and PE/
Process (SS 150 deg C / 1/8 ASTM A-
TP304 EFW for
304) 8 barg 24 312
2 and
above.
-1-
JITENDRA SURVE PIPING GUIDE 01/04/03
Services
Process.
Utilities.
Material Used
API 5L - B : Pipe.
Thickness/SCH
8 12 And 24 : S-20.
14 Above Except 24 : S-10.
Fabrication Type
All pipes from 8 to 28 are PE and SAW.
Services
Process.
Utilities.
Material Used
ASTM A106-B : Seamless carbon steel pipe for high temperature
servuce.
Thickness/SCH
Depends of pressure.
Upto 11/2 : S-XS.
Above 2 to 6: S-STD.
Above 6 : S-30
-2-
JITENDRA SURVE PIPING GUIDE 01/04/03
Fabrication Type
All pipes from PE AND SMLS.
Services
Process.
Polymer.
Solid additives.
Jacket (LP steam)
Liquid additives.
Material Used
ASTM A312-TP304 : Seamless and welded austenitic stainless steel
pipe.
Fabrication Type
End condition for all pipes PE.
Fabrication depends upon Temperature and pressure. For lower
temperatures below 150 deg C: 11/2 and below are SMLS and higher
as EFW.
Services
Process. (120C,22barg,1/8-24,)
Process. (220C,3.5barg,1/8-24,PE,SMLS)
Low blow down (Not clean). (120C, 3.5barg, 1/8-24)
Propylene off gas. (150C, 36barg, 1/8-24)
Propylene (120C, 62barg, 1/8-24)
Flare Header. (120C, 3.5barg, 1/8-30)
-3-
JITENDRA SURVE PIPING GUIDE 01/04/03
Material Used
ASTM A333-6 : Seamless and welded steel pipe for low temperature
services.
Fabrication Type
All pipes from 1/8 to 30 are PE and SMLS.
Services
High temperature and pressure STEAM.
Material Used
ASTM A335-P11 : Seamless Ferritic alloy steel pipe for high
temperature service.
Fabrication Type
All pipes from 1/2 to 14 are PE and SMLS.
Services
Underground Utilities.
Material Used
ASTM A53-B W&C : Pipe, steel, black and hot-dipped, zinc coated,
welded and semless.
-4-
JITENDRA SURVE PIPING GUIDE 01/04/03
Thickness/SCH
Upto 11/2 : S-XS.
2 6 : S-STD.
8-12 and 24 : S-20
14 36 except 24 : S-10.
Fabrication Type
1/8 to 6 are PE and SMLS.
8 to 28 are PE and ERW.
GALVANISED PIPES
Services
Drinking Water.
Instrument Air.
Material Used
ASTM A53-B GALV : Pipe, steel, black and hot-dipped, zinc coated,
welded and semless.
Thickness/SCH
Upto 2 : S-XS.
Above 2 : S-STD.
Fabrication Type
All pipes from 1/2 to 4 are MT and SMLS.
-5-