DCS Vendors List
DCS Vendors List
SCADA
Company/Developer - Brand/Software
1) Honeywell --- Experion HS
2) Trihedral --- VTScada
3) IDS --- HIGH-LEIT SCADA
4) Ecava --- IntegraXor ( IGX)
5) Copa --- Data zenOn
6) Afcon --- P-CIM
7) Ordinal --- MESbox SCADA
8) Yokogawa --- Fast/Tools
9) Siemens --- Simatic WinCC
10) TA-Engineering Products --- Aimax
These units acquire the information from various sensors via input module, analyze and
process it based on the control logic implemented and sends the output signals via output
modules to have control on actuators and relays.
Although both DCS and SCADA are monitoring and control mechanisms in industrial
installations, they have different goals. There exist some commonality between DCS and
SCADA in terms of hardware and its components, however, there are certain
requirements by the end applications that separates a robust and cost-effective DCS from
the viable SCADA system. Some of the differences between DCS and SCADA are listed
below.
1. DCS is process oriented, whereas SCADA is data-gathering oriented. DCS emphasizes more
on control of the process and it also consists of supervisory control level. And as a part of doing
so, it presents the information to the operator. On the other hand, SCADA concentrates more
on acquisition process data and presenting it to the operators and control centre.
2. In DCS, data acquisition and control modules or controllers are usually located within a more
confined area and the communication between various distributed control units carried via a
local area network. SCADA generally covers larger geographical areas that use different
communication systems which are generally less reliable than a local area network.
3. DCS employs a closed loop control at process control station and at remote terminal units. But
in case of SCADA there is no such closed loop control.
4. DCS is process state driven where it scans the process in regular basis and displays the results
to the operator, even on demand. On the other hand, SCADA is event driven where it does not
scan the process sequentially, but it waits for an event that cause process parameter to trigger
certain actions. Hence, DCS does not keep a database of process parameter values as it
always in connection with its data source, whereas SCADA maintains a database to log the
parameter values which can be further retrieved for operator display and this makes the SCADA
to present the last recorded values if the base station unable to get the new values from a
remote location.
5. In terms of applications, DCS is used for installations within a confined area, like a single plant
or factory and for a complex control processes. Some of the application areas of DCS include
chemical plants, power generating stations, pharmaceutical manufacturing, oil and gas
industries, etc. On the other hand SCADA is used for much larger geographical locations such
as water management systems, power transmission and distribution control, transport
applications and small manufacturing and process industries.
Intellution
Rockwell Software
Wonderware
Citect
GE/Fanuc
Siemens
Iconics
USDATA
National Instruments
Indusoft
List of Sensors
HD 2013.2 - rain sensor, frequency output 1 500 … 6 000 Hz (rain … dry sensor
Low Frequency B-DOT Sensor The PRODYN Model B-27(A) is a small, free-field low frequency sensor,
which was designed to measure the first time derivative of B fields in a plasma environmen
7000 SWN - selfcleaning turbidity and suspended solids sensor with frequency output
A wide range of smart sensors, weather stations, water quality and gas monitoring equipment
from Monitor Sensors
SBE49 FastCAT CTD - integrated conductivity, temperature, pressure sensoTransducers with Frequency
Output
MPS-D8 - multiparameter sensor for 13 parameters: water level, °C, conductivity, salinity, O2, pH, ORP,
NH3, NO3-, Cl-, NH4+, Na+, Ca2+, F-, K+ and turbidity