Oracle VM Release Notes 3.4.4
Oracle VM Release Notes 3.4.4
E85146-02
August 2017
Oracle Legal Notices
Copyright © 2011, 2017 Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected
by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce,
translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse
engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them
to us in writing.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then
the following notice is applicable:
U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware,
and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition
Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs,
including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license
terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for
use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware
in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its
safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous
applications.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are
trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or
registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.
This software or hardware and documentation may provide access to or information about content, products, and services from third parties.
Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content,
products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not
be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set
forth in an applicable agreement between you and Oracle.
Table of Contents
Preface .............................................................................................................................................. ix
1 Introduction ..................................................................................................................................... 1
2 Installing and Upgrading Oracle VM ................................................................................................. 3
3 What's New in Oracle VM? ............................................................................................................. 5
3.1 What's New in Oracle VM Release 3.4.4? ............................................................................. 5
3.2 What's New in Oracle VM Release 3.4.3? ............................................................................. 7
3.3 What's New in Oracle VM Release 3.4.2? ........................................................................... 11
3.4 What's New in Oracle VM Release 3.4.1? ........................................................................... 17
3.5 What's New in Oracle VM Release 3.3.5? ........................................................................... 22
3.6 What's New in Oracle VM Release 3.3.4? ........................................................................... 25
3.7 What's New in Oracle VM Release 3.3.3? ........................................................................... 27
3.8 What's New in Oracle VM Release 3.3.2? ........................................................................... 29
3.9 What's New in Oracle VM Release 3.3.1? ........................................................................... 32
3.10 What's New in Oracle VM Release 3.2.1? ......................................................................... 36
3.11 What's New in Oracle VM Release 3.1.1? ......................................................................... 38
3.12 What's New in Oracle VM Release 3.0.3? ......................................................................... 39
3.13 What's New in Oracle VM Release 3.0.2? ......................................................................... 40
4 Notable Bug Fixes ......................................................................................................................... 43
4.1 Bug Fixes in Oracle VM 3.4.4 ............................................................................................. 43
4.2 Bug Fixes in Oracle VM 3.4.3 ............................................................................................. 44
4.3 Bug Fixes in Oracle VM 3.4.2 ............................................................................................. 45
4.4 Bug Fixes in Oracle VM 3.4.1 ............................................................................................. 46
4.5 Bug Fixes in Oracle VM 3.3.5 ............................................................................................. 47
4.6 Bug Fixes in Oracle VM 3.3.4 ............................................................................................. 48
4.7 Bug Fixes in Oracle VM 3.3.3 ............................................................................................. 49
4.8 Bug Fixes in Oracle VM 3.3.2 ............................................................................................. 51
4.9 Bug Fixes in Oracle VM 3.3.1 ............................................................................................. 52
4.10 Bug Fixes in Oracle VM 3.2.1 ........................................................................................... 55
4.11 Bug Fixes in Oracle VM 3.1.1 ........................................................................................... 56
4.12 Bug Fixes in Oracle VM 3.0.3 ........................................................................................... 56
5 Supported Guest Operating Systems ............................................................................................. 59
5.1 Oracle VM Server for x86 Supported Guest Operating Systems ............................................ 59
5.2 Oracle VM Server for SPARC Supported Guest Operating Systems ...................................... 63
6 Oracle VM Manager Support for Previous Oracle VM Server releases .............................................. 65
7 Configuration Limits for Release 3.4 ............................................................................................... 67
8 Known Limitations and Workarounds .............................................................................................. 73
8.1 Integration Between Oracle VM Server for SPARC and Oracle VM Manager .......................... 77
8.2 Missing Physical Disk Warning for Oracle VM Server Instance After Upgrading Oracle VM
Manager ................................................................................................................................... 77
8.3 Suspend Error During Storage Live Migration ...................................................................... 78
8.4 Cannot Change Memory Configuration of Running PVHVM Guests Based on CentOS 6 ......... 79
8.5 PVHVM Guests Based on CentOS 5 Do Not Start Successfully After Conversion from PVM .... 79
8.6 PVM Guests Based on CentOS 5 Do Not Start Successfully After Conversion from PVHVM .... 79
8.7 Guests Based on CentOS 5.11 Start with the Maximum Memory Configuration ...................... 79
8.8 Guests Based on CentOS 5 Display Incorrect Number of VNICs ........................................... 79
8.9 Cannot Connect to the Oracle VM Manager Command Line Interface .................................... 80
8.10 Live Migrating Oracle Solaris Guests to Oracle VM Server Release 3.4.4 or Later Results
in Guest Reboot ....................................................................................................................... 80
8.11 Cannot Remove Software RAID Devices from Oracle VM Manager ..................................... 82
8.12 VNICs Deleted When Editing Virtual Machine .................................................................... 82
8.13 Enable High Availability Option is Disabled Due to Restart Option ....................................... 82
iii
Oracle® VM
8.14 Cannot Upgrade Oracle VM Manager Due to Presence of Temporary Files .......................... 82
8.15 Job List Excel Spreadsheet Name Contains Unexpected Characters ................................... 83
8.16 Oracle Linux 6 HVM Guest Virtual Machine with Hard Disk of 2TiB in Size Hangs on Boot ..... 83
8.17 Kernel Panic when Assigning More Than 32 virtual CPUs to Oracle Linux 32-bit PVM
Guests ..................................................................................................................................... 84
8.18 Live Migration of Guest Virtual Machine Fails Due to Linux Kernel Version ........................... 84
8.19 PVHVM Guest Boot Delayed by Xen Balloon Driver ........................................................... 85
8.20 Oracle VM Server Cannot Boot from Software RAID Devices with Disks that are 2TB or
Larger ...................................................................................................................................... 85
8.21 Oracle VM Server Does Not Boot After Installation to LUN Targets Larger Than 2TB ............ 85
8.22 Oracle VM Server Boot Delay and I/O Error Messages with Oracle ZFS Storage Array .......... 86
8.23 FIPS Integrity Error Message for SSH Connections from Oracle VM Server ......................... 86
8.24 Incorrect MAC Address Displayed for Bond Port ................................................................ 87
8.25 Kernel Panic when Booting Guest Virtual Machine with 100 or more Virtual Disks ................. 87
8.26 Different Default Values for the serverAffinityType when Creating Anti-Affinity Groups ........... 87
8.27 Performance Impact when Less than 8 CPUs Configured for dom0 ..................................... 87
8.28 Upgrading Oracle VM Server from Release 3.2.10 to 3.3.4 and then to 3.4.2 fails ................. 88
8.29 Logical Volume Manager (LVM) is enabled on Oracle VM Server Release 3.4.1 ................... 88
8.30 Btrfs Root File System Not Supported on PVM Guest Virtual Machines ................................ 89
8.31 SUSE Linux Enterprise Server 12 SP2 and Later Not Supported For PVM Guest Virtual
Machines .................................................................................................................................. 89
8.32 Cannot Connect to the Oracle VM Manager Web Interface with Microsoft Internet Explorer .... 89
8.33 The Virtual Machine Console Window in the Oracle VM Manager Web Interface Opens in
the Background when using Microsoft Internet Explorer ............................................................. 89
8.34 Inconsistent Value for SPARC Domain Type ...................................................................... 90
8.35 Integer Only Values for the statValue Option ...................................................................... 90
8.36 Aborting a Server Discovery Operation Results in Server Listed with an Unknown
Operational State ..................................................................................................................... 90
8.37 Automatic Discovery Operations can Conflict with Server Configuration Operations .............. 91
8.38 Solaris 11 x86 Virtual Machine Disk Type Can Cause Kernel Panic on Boot ......................... 91
8.39 Solaris 10 x86 Virtual Machine Installation Fails To Boot .................................................... 91
8.40 Oracle Linux 7 Virtual Machines Imported from a VirtualBox Virtual Appliance Do Not Start
on Oracle VM ........................................................................................................................... 92
8.41 (x86 Only) IOStat Stays at 100% Util for Oracle Linux Virtual Machines After a Storage
Migration .................................................................................................................................. 92
8.42 Serial Console Does Not Respond for Oracle Linux 7 HVM Virtual Machines ........................ 93
8.43 Error When Attaching CD-ROM Drives to Running HVM Virtual Machines ............................ 93
8.44 Deleting Bond Ports for VLANIF Interfaces Deletes the VLANIF .......................................... 93
8.45 (SPARC Only) NFSv4 Delegation Interferes with Cluster Heartbeat, Using NFSv3 Results
in RPC Error PROGRAM/VERSION MISMATCH ....................................................................... 94
8.46 Cannot Import OVF Files into Oracle VirtualBox ................................................................. 94
8.47 Oracle VM Manager Cannot Receive Messages from SPARC Virtual Machines .................... 94
8.48 Cannot Boot Oracle VM Server Installed on an HP DL380 Gen9 Server in UEFI mode .......... 94
8.49 (x86 Only) Cannot Boot Oracle VM Server with Broadcom 57840S CNA Card After PXE
Install ....................................................................................................................................... 95
8.50 Changing to Dynamic Mode IP Address Assignment Does Not Rollback if the Server is
Unable to Obtain an IP Address ............................................................................................... 95
8.51 Drag and Drop from Blank Space of Object ....................................................................... 95
8.52 Error When Using the Administrator Tool in Parallel ........................................................... 95
8.53 Oracle VM Manager Command Line Interface TCP Port Conflicts With Port Reserved for
NDMP ...................................................................................................................................... 96
8.54 When A Virtual Machine Using A Shared Virtual Disk Is Moved To Another Repository, The
Shared Virtual Disk Is Cloned ................................................................................................... 96
8.55 Unable to Remove a Storage Array if a File System Exists on a LUN .................................. 96
iv
Oracle® VM
8.56 Cluster Failure After An Offline Server is Removed From the Cluster While Another Cluster
Member is Offline ..................................................................................................................... 96
8.57 LSI Logic / Symbios Logic MegaRAID SAS 1078 is not supported on Oracle VM Server ........ 97
8.58 (SPARC Only) Hot-added CD-ROM Device is Detected As Hard Disk .................................. 98
8.59 Fibre Channel LUNs Missing From Oracle VM Manager After Refresh ................................. 98
8.60 (SPARC Only) Size of Physical Disk in Oracle VM Manager Incorrect When LUN Size is
Decreased on Storage Array ..................................................................................................... 99
8.61 The Apparent Size of a Repository in Oracle VM Manager Web Interface Does Not Update
Automatically ............................................................................................................................ 99
8.62 Virtual Disks Do Not Display on Solaris 10 Guests ............................................................. 99
8.63 Oracle Linux 5 Virtual Machines Converted from Physical Hosts Do Not Boot ..................... 100
8.64 SSL Exception in AdminServer Log File ........................................................................... 100
8.65 Oracle VM Servers in a Server Pool Must Be at the Same Minor Version ........................... 100
8.66 Oracle VM Manager Displays Incorrect Details for ZFS Storage Appliances After Cluster
Failover .................................................................................................................................. 101
8.67 Oracle VM Server Upgrade Not Possible with NetApp Storage plug-in ............................... 101
8.68 Oracle VM Manager Web Interface Incorrectly Displays Oracle VM Server Upgrade
Required ................................................................................................................................ 101
8.69 The Oracle VM Manager Silent Install Option Using A YAML Configuration File Is
Deprecated ............................................................................................................................. 101
8.70 Aborting An Oracle VM Server Upgrade Initiated By The UpgradeServers.py Script May
Result In Inconsistent Reporting on Upgrade Status ................................................................. 102
8.71 Kdump On Oracle VM Server Only Supports Dump Levels 0 and 1 ................................... 102
8.72 Network Receive Statistics For A Virtual Machine Are Invalid And Set To -1 ....................... 102
8.73 CPU Affinity After Live Migration of Virtual Machine on Non-Uniform Memory Access
(NUMA) Systems .................................................................................................................... 103
8.74 Virtual Machines Based on Oracle Solaris 11 Do Not Boot ................................................ 103
8.75 Changing Domain Type from Xen HVM to Xen HVM PV Drivers Causes Informational
Messages in AdminServer.log ................................................................................................. 103
8.76 Single-Stream TCP Throughput is Degraded for Guest Virtual Machines Running UEK
Release 4 ............................................................................................................................... 103
8.77 Error Partitioning Caused by Disk Label or Format in UEFI Mode ...................................... 104
8.78 Kernel Panic when Booting Guest Virtual Machine with Oracle Solaris 11.2 ........................ 104
8.79 Oracle VM Manager Web Interface Goes to Blank Screen with Mozilla Firefox on a Linux
System ................................................................................................................................... 104
8.80 HugePages Deprecated for PVM Guests as of Oracle VM Release 3.4.1 ........................... 105
8.81 HugePages Does Not Display as Selected in Oracle VM Manager Web Interface ................ 105
8.82 Kdump Service Hangs at Discovery of FCoE Device with Broadcom CNA on HP Servers .... 105
8.83 Kdump Service with UEK Release 4 Fails to Create Memory Dump on Cisco UCS B230
M2 Blade Server .................................................................................................................... 105
8.84 Do Not Discover Oracle VM Servers Earlier than Release 3.2.10 ....................................... 106
8.85 (SPARC Only) Cannot Export Virtual Appliance with Physical Disk Access ......................... 106
8.86 (SPARC Only) MTU Resets to the Default of 1500 After Server Power Off ......................... 106
8.87 Oracle VM Server Installer Fails When Modifying Swap Partitions ..................................... 107
8.88 Kernel Startup is Slow after Upgrading to UEK4 on PVHVM Guests .................................. 107
8.89 Cannot Enable High Availability (HA) for Virtual Machines with HugePages ........................ 107
8.90 Kdump is Not Supported on FCoE SANs ......................................................................... 107
8.91 Virtual Machines Hang at Boot if Grant Reference Request Too Large ............................... 108
8.92 Cannot Edit Running Virtual Machines with HugePages and HA Enabled ........................... 108
8.93 Import URL Cannot Exceed Maximum Character Length ................................................... 108
8.94 Performance Impact for Less than 8 CPUs Configured for dom0 ....................................... 109
8.95 Migration of PVHVM Guest Virtual Machines may be Affected by Linux Kernel Version ........ 109
8.96 SR-IOV Is Not a Supported Feature ................................................................................ 109
8.97 Oracle VM Manager Upgrade Does Not Restore External Authentication Provider ............... 109
v
Oracle® VM
8.98 Limit of 3 Virtual Machine Console Windows with Microsoft Internet Explorer ...................... 110
8.99 Virtual Machine Migration Job Loop During Oracle VM Upgrade ........................................ 110
8.100 Kdump Service on Oracle Sun Server X4-4 with QLogic QLE2562 HBA ........................... 111
8.101 The kdump Service Cannot Mount the Root Partition if Zone Connection to EMC Storage
Array ...................................................................................................................................... 112
8.102 Oracle VM Server Hangs During Upgrade if Boot Partition Not Large Enough ................... 112
8.103 GRO Must Be Disabled After an Upgrade When Routing/Bridging with IXGBE Driver ........ 112
8.104 Change in Variable Name for the eventGetTypes SOAP Call using Oracle VM Web
Services API .......................................................................................................................... 112
8.105 Restart Virtual Machines After Upgrade ......................................................................... 113
8.106 LRO Setting Bridge Interface ......................................................................................... 113
8.107 Disable Transitional Update Repository .......................................................................... 113
8.108 (X86 Only) SWIOTLB Buffer Errors When Using Jumbo Frames on Oracle VM Server ...... 113
8.109 Operation Transactions ................................................................................................. 113
8.110 One Instance of Oracle VM Manager Web Interface Per Browser Session ........................ 114
8.111 IPv6 Updates On Some Microsoft Windows Guests Do Not Reflect in Oracle VM Manager 114
8.112 Incorrect Text Color After Acknowledging VM Errors ....................................................... 114
8.113 Unable to Copy Text or Take Screen Shots of Error Dialogs ........................................... 114
8.114 Safari Web Browser on Windows is not Supported ......................................................... 115
8.115 Object Lock Prevents Some Operations ......................................................................... 115
8.116 Unable to Configure NTP For All Servers ....................................................................... 115
8.117 (x86 Only) Oracle VM Server Installer Goes To Black Screen After Running /sbin/
loader .................................................................................................................................. 115
8.118 (x86 Only) Oracle VM Server Installer Hangs Waiting for Hardware to Initialize ................. 116
8.119 (x86 Only) Oracle VM Server Installer Hangs Examining Storage Devices For Large
Number of LUNS .................................................................................................................... 116
8.120 (x86 Only) Benign Error Message During Install: HDIO_GET_IDENTITY failed .................. 116
8.121 (x86 Only) Cannot Use Installation Media to Upgrade Oracle VM Server if Earlier than
Release 3.3.x ......................................................................................................................... 116
8.122 (x86 Only) Oracle VM Server Upgrade From ULN or Oracle Public Yum Repositories is
Restricted to Servers That Do Not Use Non-Native Packages ................................................... 117
8.123 (x86 Only) Many ISCSI or Fibre Channel LUNs Require More Server Memory .................. 117
8.124 Clustered Server Pools in Mixed Platform Environments Require NFS Access Groups To
Be Configured ........................................................................................................................ 117
8.125 (SPARC Only) Cluster Recovery May Fail When Using NFSv3 For Server Pool File
System ................................................................................................................................... 118
8.126 (x86 Only) Server BIOS Settings ................................................................................... 118
8.127 (x86 Only) Oracle VM Server Does Not Support crashkernel=auto Boot Parameter ........... 118
8.128 Kdump Core Collector Using Sparse Copy Fails ............................................................. 119
8.129 (x86 Only) Oracle VM Server Installation on Sun Fire X4800 ........................................... 119
8.130 (x86 Only) Installation of Oracle VM Server on some HP Server Hardware May Fail if
Tape Drive is Attached ........................................................................................................... 119
8.131 (x86 Only) Wake On Lan (WOL) Fails if Oracle VM Servers on Different Subnets .............. 119
8.132 (x86 Only) Sun Fire X4170 Server Not Fenced During Cluster Failure .............................. 120
8.133 (x86 Only) Netconsole Unknown Error 524 During Oracle VM Server Start-up .................. 120
8.134 (x86 Only) ACPI Buffer Error After Installing Oracle VM Server ........................................ 120
8.135 Failed Server Evacuation Defined in DPM Policy Generates User Acknowledgeable Event 120
8.136 (SPARC Only) Serial Console Hangs During Installation of Oracle Solaris 11 on Virtual
Machine ................................................................................................................................. 121
8.137 Editing Virtual Machine Configuration File Results in Unexpected Behavior ....................... 121
8.138 Concurrent Template Operations May Fail Due to Lock Issue .......................................... 121
8.139 (SPARC Only) Wrong Error Message Returned When Importing A Template From An
Incorrect URL ......................................................................................................................... 122
vi
Oracle® VM
8.140 (x86 Only) Virtual Machine Fails to Restart On Another Server in the Cluster if ACPI is
Enabled .................................................................................................................................. 122
8.141 (x86 Only) Oracle Solaris 10 Virtual Machine May Hang During Shutdown ....................... 122
8.142 (x86 Only) Virtual Machine Created with Network (PXE) Installation Does Proceed
Beyond Pre Boot .................................................................................................................... 122
8.143 (x86 Only) Maximum Memory to Start a PVM Guest is 470 GB ....................................... 123
8.144 (x86 Only) Creating a PVM Guest Slow Using Local Storage ........................................... 123
8.145 (x86 Only) Live Migration of a VM may be Affected by Guest Linux Kernel Version ............ 123
8.146 (x86 Only) Improving Mouse Pointer Control in Virtual Machine Console .......................... 123
8.147 (x86 Only) Solaris 10 Kernel Panic on Some AMD Systems ............................................ 123
8.148 (x86 Only) Solaris 10 Release 8/11 Guest Hangs at Boot ................................................ 124
8.149 (x86 Only) Solaris 11 Guest With More Than 2 VCPUs Hangs at Boot ............................. 124
8.150 (x86 Only) Solaris 11 Release 2011.11 Guest Hangs at Boot .......................................... 125
8.151 (x86 Only) Windows Server 2008 R2 x64 HVM Guests do Not Cleanly Shut Down ............ 125
8.152 (SPARC Only) Need Actual Available Memory for Live Migration ..................................... 126
8.153 (x86 Only) Network Card Limit in Virtual Machines ......................................................... 126
8.154 QLogic cLOM8214 1/10 Gigabit Ethernet NIC Initializes with Link State Down .................. 126
8.155 Renaming of QLogic cLOM8214 1/10 Gigabit Ethernet NIC is Incorrect ............................ 126
8.156 (x86 Only) Incorrect ARP Reply When Using Jumbo Frames ........................................... 127
8.157 (x86 Only) Changing Cluster Heartbeat Network Does Not Reflect New IP Address ........... 127
8.158 NFSv4 Read/Write Delegation Not Supported ................................................................. 128
8.159 (x86 Only) Unclean File System Causes Errors When Used as a Server Pool File System . 128
8.160 (SPARC Only) Agent Fails to Reconcile Multipath LUNS If Solaris I/O Multipathing is
Disabled ................................................................................................................................. 128
8.161 (x86 Only) Size of New LUN on Server is Incorrect If an Existing LUN Is Unmapped First ... 129
8.162 (x86 Only) Remapping LUNs Causes Storage Refresh To Hang ...................................... 129
8.163 (x86 Only) LUNs Must Be Cleaned Prior to Storage Repository Creation .......................... 129
8.164 NetApp ONTAP (8.2 c-mode) Operating System Does Not Work With Oracle VM ............. 130
8.165 (x86 Only) Black Listing of System Disks for Legacy LSI MegaRAID Controllers Not
Supported ............................................................................................................................... 130
8.166 (x86 Only) Blacklisting of System Disks for Multipathing Fails on HP Smart Array (CCISS)
Disk Devices .......................................................................................................................... 130
8.167 (x86 Only) HP Smart Array CCISS Disk Devices Are Not Supported For Creation of Local
Storage Repositories .............................................................................................................. 131
8.168 (x86 Only) Multiple Paths Used in Multipath Environments on Oracle Pillar Axiom Storage . 131
8.169 Refreshing a NAS-based File System Produces Invalid/Overlapping Exports .................... 131
8.170 (x86 Only) Shared OCFS2 Cluster File System on Virtual Disk Not Supported .................. 132
8.171 Virtual Disk Images Must Be Properly Aligned To The OCFS2 Block Size For
Performance ........................................................................................................................... 132
8.172 Oracle VM Manager Command Line Interface Backspace Key ........................................ 132
8.173 Oracle VM Manager Command Line Interface Allows THIN_CLONE cloneType On NFS .... 133
8.174 Untagged VLAN Interface Missing After Upgrade of Oracle VM Manager .......................... 133
9 Additional Software for Oracle VM ............................................................................................... 135
9.1 Oracle VM Paravirtual Drivers for Microsoft Windows ......................................................... 135
9.2 Oracle VM Storage Connect plug-ins ................................................................................. 135
9.3 Oracle VM Guest Additions ............................................................................................... 135
9.4 Oracle VM Utilities ............................................................................................................ 135
9.5 Oracle OpenStack ............................................................................................................ 136
9.6 Third Party Software ......................................................................................................... 136
vii
viii
Preface
The Oracle VM Release Notes contain information on Oracle VM Release 3.4 and supersedes the product
documentation. This document contains last-minute information that could not be included the Oracle VM
documentation. Read this document before installing Oracle VM. This document may be updated after it
is released. To check for updates to this document, and to view other Oracle documentation, refer to the
Documentation section on the Oracle Technology Network (OTN) Web site:
http://www.oracle.com/technology/documentation/
The release notes provided for each subsequent release of Oracle VM are published as individual
documents at the time that the release is made available. You should check that you are referring the
correct document for the release that you are interested in. The release notes for each of the Oracle VM
3.4.x releases is available at:
http://download.oracle.com/docs/cd/E64076_01
This document is intended for users, and administrators of Oracle VM. It includes describes potential
issues and the corresponding workarounds you may encounter while using Oracle VM.
Oracle recommends that you read this document before installing and using Oracle VM.
Audience
This document is intended for Oracle VM administrators with privileged access to the physical and virtual
resources of the Oracle VM environment. This guide assumes that you have an in depth knowledge of
Oracle VM (see the Oracle VM Manager User's Guide), and that you are familiar with Oracle Linux system
administration and Linux command line operation.
Related Documents
For more information, see the following documents in the Oracle VM documentation set:
You can also get the latest information on Oracle VM by going to the Oracle VM Web site:
ix
Command Syntax
http://www.oracle.com/us/technologies/virtualization/oraclevm
Command Syntax
Oracle Linux command syntax appears in monospace font. The dollar character ($), number sign (#), or
percent character (%) are Oracle Linux command prompts. Do not enter them as part of the command.
The following command syntax conventions are used in this guide:
Convention Description
backslash \ A backslash is the Oracle Linux command continuation character. It is used in
command examples that are too long to fit on a single line. Enter the command
as displayed (with a backslash) or enter it on a single line without a backslash:
dd if=/dev/rdsk/c0t1d0s6 of=/dev/rst0 bs=10b \
count=10000
italics Italic type indicates a variable. Substitute a value for the variable:
library_name
forward slash / A forward slash is used to escape special characters within single or double
quotes in the Oracle VM Manager Command Line Interface, for example:
create Tag name=MyTag description="HR/'s VMs"
Conventions
The following text conventions are used in this document:
Convention Meaning
boldface Boldface type indicates graphical user interface elements associated with an
action, or terms defined in text or the glossary.
italic Italic type indicates book titles, emphasis, or placeholder variables for which
you supply particular values.
monospace Monospace type indicates commands within a paragraph, URLs, code in
examples, text that appears on the screen, or text that you enter.
Documentation Accessibility
For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website
at
http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.
x
Access to Oracle Support
xi
xii
Chapter 1 Introduction
Oracle VM is a platform that provides a fully equipped environment for better leveraging the benefits of
virtualization technology. Oracle VM enables you to deploy operating systems and application software
within a supported virtualization environment. The components of Oracle VM are as follows:
Oracle VM Manager
Oracle VM Manager is a server side component that allows you to configure and manage your Oracle VM
environment. Oracle VM Manager includes both a command line interface and a web-based user interface,
which is a standard Application Development Framework (ADF) web application. Oracle VM Manager
provides virtual machine management facilities, including creating virtual machines from installation media
or from templates. It provides features such as power on, power off, deleting, importing, deploying, and
live migration of virtual machines. Oracle VM Manager also manages resources, including ISO files, virtual
machine templates, and shared virtual disks.
This document sets out to describe items of interest and relevance to the current release of Oracle
VM. The release notes provided for each subsequent release of Oracle VM are published as individual
documents at the time that the release is made available. You should check that you are referring to the
correct document for the release that you are interested in. The release notes for each of the Oracle VM
3.4.x releases is available at:
http://download.oracle.com/docs/cd/E64076_01
Note
This errata update for Oracle VM Release 3.4 provides complete installation
packages for Oracle VM Manager and Oracle VM Server. Each errata update for
Oracle VM includes all cumulative enhancements, bug fixes, and security updates
since Oracle VM Release 3.4.1.
1
2
Chapter 2 Installing and Upgrading Oracle VM
The Oracle VM Installation and Upgrade Guide explains how to install and upgrade Oracle VM. For
instructions on:
Upgrading versions of Oracle VM Manager that are using an Oracle XE database as a back end repository
is not supported in this release, as the Oracle XE database is no longer supported under Oracle VM. If you
are currently running an Oracle XE database for an existing installation of Oracle VM Manager, you must
migrate the Oracle XE database to Oracle SE or Oracle EE before performing an upgrade to Release 3.4.
3
4
Chapter 3 What's New in Oracle VM?
Table of Contents
3.1 What's New in Oracle VM Release 3.4.4? ..................................................................................... 5
3.2 What's New in Oracle VM Release 3.4.3? ..................................................................................... 7
3.3 What's New in Oracle VM Release 3.4.2? ................................................................................... 11
3.4 What's New in Oracle VM Release 3.4.1? ................................................................................... 17
3.5 What's New in Oracle VM Release 3.3.5? ................................................................................... 22
3.6 What's New in Oracle VM Release 3.3.4? ................................................................................... 25
3.7 What's New in Oracle VM Release 3.3.3? ................................................................................... 27
3.8 What's New in Oracle VM Release 3.3.2? ................................................................................... 29
3.9 What's New in Oracle VM Release 3.3.1? ................................................................................... 32
3.10 What's New in Oracle VM Release 3.2.1? ................................................................................. 36
3.11 What's New in Oracle VM Release 3.1.1? ................................................................................. 38
3.12 What's New in Oracle VM Release 3.0.3? ................................................................................. 39
3.13 What's New in Oracle VM Release 3.0.2? ................................................................................. 40
Review the new features and enhancements in each release of Oracle VM.
New features and enhancements included in Oracle VM Release 3.4.4 are as follows:
Infrastructure
Support for Microsoft Windows As of this release, Oracle VM supports Microsoft Windows Server 2016
Server 2016 guest operating systems. See Chapter 5, Supported Guest Operating
Systems.
Update to the dom0 Kernel The dom0 kernel for Oracle VM Server is updated to Unbreakable
Enterprise Kernel Release 4 Update 4 (UEK R4 U4) in this release.
See the UEK R4 U4 Release Notes for information on new features
and updates: https://docs.oracle.com/cd/E52668_01/E86280/html/
index.html.
Support for Skylake processors Oracle VM provides improved support for servers that use Skylake
processors, including the Intel® Xeon® E3 v5, Intel® Xeon® Platinum
8100, Intel® Xeon® Gold 6100, Intel® Xeon® Gold 5100, Intel® Xeon®
Silver 4100 and Intel® Xeon® Bronze 3100 families of processors. This
support is available as part of the dom0 kernel update to UEK R4 U4.
Package Additions and Updates The full list of package additions and updates is beyond the scope
of this document, but the following list includes the notable package
updates that are included in this release:
5
Performance and Scalability
• device-mapper-multipath-
libs-0.4.9-100.0.3.el6.x86_64
• device-mapper-multipath-0.4.9-100.0.3.el6.x86_64
• kpartx-0.4.9-100.0.3.el6.x86_64
• libgudev1-147-2.73.0.1.el6_8.2.x86_64
• libudev-147-2.73.0.1.el6_8.2.x86_64
• udev-147-2.73.0.1.el6_8.2.x86_64
Xen 4.4.4 Performance and • Update to netfront and netback drivers: Along with UEK R4 U4,
Scalability Updates this release of Oracle VM delivers updates to the netfront and netback
drivers.
•
Improved grant locking: Xen-netback multi-queue improvements
take advantage of grant locking enhancements that are now available
in Oracle VM Server Release 3.4.4.
•
Improved guest performance by recycling grants: With both host
and guest virtual machines using the latest dom0 kernel version UEK
R4 U4, network and database performance is enhanced by recycling
grants, resulting in improved guest virtual machine performance.
Usability
CentOS is now listed as a supported guest OS type in Oracle VM
Oracle VM now displays CentOS as a supported guest operating system in the Oracle VM Manager
Web Interface, Oracle VM Manager Command Line Interface, and Oracle VM Web Services API.
Documentation
New Location for the Oracle VM Paravirtual Drivers for Microsoft Windows Documentation
As of Oracle VM Release 3.4.4, the Oracle VM Paravirtual Drivers for Microsoft Windows
documentation has moved to a new library location: http://docs.oracle.com/cd/E88077_01/index.html.
Note
Oracle VM Release 3.4, Release 3.3, and Release 3.2 library pages are
updated with a Related Documentation section that includes a link to the Oracle
6
Security
VM Paravirtual Drivers for Microsoft Windows library. For example, see http://
docs.oracle.com/cd/E64076_01/index.html.
Security
Security updates included in this errata update release are as follows:
• Oracle MySQL patch update: This release of Oracle VM includes the July 2017 Critical Patch Update
for MySQL. (26120786)
• Oracle WebLogic patch update: This release of Oracle VM includes the July 2017 Critical Patch
Update for WebLogic. (26120775)
• Oracle Java patch update: This release of Oracle VM includes the July 2017 Critical Patch Update for
Java. (26120782)
• Xen security advisories: The following Xen security advisories are included in this release:
• XSA-216 (CVE-2017-10911)
• XSA-217 (CVE-2017-10912)
• XSA-219 (CVE-2017-10915)
• XSA-220 (CVE-2017-10916)
• XSA-221 (CVE-2017-10917)
• XSA-222 (CVE-2017-10918)
• XSA-223 (CVE-2017-10919)
• XSA-226 (CVE-2017-12135)
• XSA-227 (CVE-2017-12137)
• XSA-228 (CVE-2017-12136)
• XSA-230 (CVE-2017-12855)
7
Infrastructure
Note
Infrastructure
Support for Software RAID You can now create Kickstart configurations that assemble software
Devices with Oracle VM Server RAID devices during the Oracle VM Server installation. See Software
RAID Partitions in the Oracle VM Installation and Upgrade Guide.
You can also create software RAID devices in dom0 after installation.
Oracle VM Server then presents those software RAID devices to Oracle
VM Manager so that you can use them as storage repositories or for
virtual disks. See Configuring Software RAID for Storage in the Oracle
VM Administration Guide.
Important
8
Infrastructure
Support for Microsoft Windows Microsoft Windows Server guests can now use SCSI-3 persistent
Server Failover Clustering reservation to form a Windows Server Failover Cluster (WSFC) with
Oracle VM Paravirtual Drivers for Microsoft Windows Release 3.4.2
or later. See Oracle VM Paravirtual Drivers for Microsoft Windows
for information about failover cluster capabilities on specific Microsoft
Operating System versions.
Update to Oracle VM Agent for As of this release, Oracle VM Agent for SPARC is updated to run
SPARC Python 2.7.
Update to the dom0 Kernel The dom0 kernel is updated to a newer Unbreakable
Enterprise Kernel Release 4 (UEK R4) version kernel-
uek-4.1.12-61.40.1.el6uek.x86_64.rpm.
Note
Package Additions and Updates The full list of package additions and updates is beyond the scope
of this document, but the following list includes the notable package
updates that are included in this release:
Updates to Multipath • This release includes the Oracle Sun ZFS Storage.* product in the
Configuration for Oracle ZFS multipath.conf file, which includes the ZFS Storage 7350 and
Storage Appliance ZFS Storage 7330 products.
9
Performance and Scalability
• Improved Job completion performance: Reduction in the time taken to complete certain jobs, for
example cloning a virtual machine or template.
• Improved Storage refresh performance: Rescanning physical disks is enhanced to ensure that
local storage on an Oracle VM Server is refreshed in a timely manner.
Improved Performance This release improves Oracle VM performance when there are multiple
With Multiple Concurrent concurrent connections to the Oracle VM Manager Command Line
Connections to the Oracle Interface.
VM Manager Command Line
Interface
Usability
Password Modification for the MySQL root user
Oracle VM now lets you change the password for the MySQL root user that the Oracle VM Manager
Administrator Tool uses to connect to the MySQL database instance. See Changing the Password for
the MySQL Root User in the Oracle VM Administration Guide.
Documentation
The following changes apply to the Oracle VM Release 3.4.3 documentation library:
• The Oracle VM Manager Online Help has been updated in the Oracle VM Manager Web Interface.
• CentOS 7 is added to the list of supported guest operating systems in the Oracle VM Release Notes.
See Chapter 5, Supported Guest Operating Systems.
• The Oracle VM Installation and Upgrade Guide has been corrected and no longer includes a statement
that you cannot boot Oracle VM Server from SAN.
Security
• Oracle MySQL patch update: This release of Oracle VM includes the January 2017 Critical Patch
Update for MySQL. (23087157)
• Oracle WebLogic patch update: This release of Oracle VM includes the January 2017 Critical Patch
Update for WebLogic. (23087146)
• Oracle Java patch update: This release of Oracle VM includes the January 2017 Critical Patch Update
for Java. (23087165).
• Xen security advisories: The following Xen security advisories are included in this release:
• XSA-184 (CVE-2016-5403)
10
What's New in Oracle VM Release 3.4.2?
• XSA-190 (CVE-2016-7777)
• XSA-191 (CVE-2016-9386)
• XSA-192 (CVE-2016-9382)
• XSA-193 (CVE-2016-9385)
• XSA-195 (CVE-2016-9383)
• XSA-197 (CVE-2016-9381)
• XSA-199 (CVE-2016-9637)
• XSA-200 (CVE-2016-9932)
• XSA-202 (CVE-2016-10024)
• XSA-204 (CVE-2016-10013)
• XSA-208 (CVE-2017-2615)
• XSA-209 (CVE-2017-2620)
• XSA-211 (CVE-2016-9603)
• XSA-212 (CVE-2017-7228)
• XSA-213 (CVE-2017-8903)
• XSA-214 (CVE-2017-8904)
• XSA-215 (CVE-2017-8905)
Infrastructure
Support for NVM Express Oracle VM Server now discovers NVMe devices and presents them to
(NVMe) devices Oracle VM Manager, where the NVMe device is available as a local
11
Infrastructure
disk that you can use to store virtual machine disks or create storage
repositories.
12
Infrastructure
Using Oracle Ksplice to update Oracle Ksplice capabilities are now available that allow you to update
the dom0 kernel the dom0 kernel for Oracle VM Server without requiring a reboot. Your
systems remain up to date with their OS vulnerability patches and
downtime is minimized. A Ksplice update takes effect immediately when
it is applied. It is not an on-disk change that only takes effect after a
subsequent reboot.
Note
Extended SCSI functionality Oracle VM now provides additional support for SCSI functionality to
available for virtual machines virtual machines:
• Linux guests can now retrieve vital product data (VPD) page 0x84
information from physical disks if the device itself makes it available.
Dom0 kernel upgraded The dom0 kernel for Oracle VM Server is updated to Oracle
Unbreakable Enterprise Kernel Release 4 Quarterly Update 2 in this
release.
13
Performance and Scalability
Note
Oracle VM Server for x86 For information on performance optimization goals and techniques for
performance optimization Oracle VM Server for x86, see Optimizing Oracle VM Server for x86
Performance, on Oracle Technology Network at: http://www.oracle.com/
technetwork/server-storage/vm/ovm-performance-2995164.pdf.
Xen 4.4.4 performance and • Improved memory allocation: Host system performance is
scalability updates improved by releasing memory more efficiently when tearing down
domains, for example, migrating a virtual machine from one Oracle
VM Server to another or deleting a virtual machine. This ensures that
the host system can manage other guest systems more effectively
without experiencing issues with performance.
Usability
Oracle VM Manager Rule for Live Migration
To prevent failure of live migration, and subsequent issues with the virtual machine environment, a rule
has been added to Oracle VM Manager, as follows:
14
Usability
Oracle VM Manager does not allow you to perform a live migration of a virtual machine to or from any
instance of Oracle VM Server with a Xen release earlier than xen-4.3.0-55.el6.22.18. This rule
applies to any guest OS.
Table 3.1 Live Migration Paths between Oracle VM Server Releases using Oracle VM Manager
Release 3.4.2
Using Oracle VM Live Migrate To:
Manager Release Release Release Release Release Release Release Release Release
3.4.2 3.2.10 3.2.11 3.3.1 3.3.2 3.3.3 3.3.4 3.4.1 3.4.2
Live Release Yes Yes Depends Depends Yes Yes Yes Yes
Migrate 3.2.10 on Xen on Xen
From: release release
Release Yes Yes Depends Depends Yes Yes Yes Yes
3.2.11 on Xen on Xen
release release
Release No No Depends Depends Depends Depends Depends Depends
3.3.1 on Xen on Xen on Xen on Xen on Xen on Xen
release release release release release release
Release No No Depends Depends Depends Depends Depends Depends
3.3.2 on Xen on Xen on Xen on Xen on Xen on Xen
release release release release release release
Release No No Depends Depends Yes Yes Yes Yes
3.3.3 on Xen on Xen
release release
Release No No Depends Depends Yes Yes Yes Yes
3.3.4 on Xen on Xen
release release
Release No No No No No No Yes Yes
3.4.1
Release No No No No No No Yes Yes
3.4.2
For example, as a result of this live migration rule, all virtual machines in an Oracle VM server pool
running Oracle VM Server Release 3.3.2 with Xen version xen-4.3.0-55.el6.22.9.x86_64 must
be stopped before migrating to Oracle VM Server Release 3.4.2.
Tip
Run the following command on Oracle VM Server to find the Xen version:
# rpm -qa | grep "xen"
As of this release, it is possible to modify the memory allocated to running PVHVM guests without a
reboot. Additionally, Oracle VM Manager now allows you to set the allocated memory to a value that is
different to the maximum memory available.
15
Security
Note
Security
• Oracle MySQL patch update: This release of Oracle VM includes the July 2016 Critical Patch Update
for MySQL. (23087189)
• Oracle WebLogic patch update: This release of Oracle VM includes the July 2016 Critical Patch
Update for WebLogic. (23087185)
• Oracle Java patch update: This release of Oracle VM includes the July 2016 Critical Patch Update for
Java. (23087198).
• Xen security advisories: The following Xen security advisories are included in this release:
• XSA-154 (CVE-2016-2270)
• XSA-170 (CVE-2016-2271)
• XSA-173 (CVE-2016-3960)
• XSA-175 (CVE-2016-4962)
• XSA-176 (CVE-2016-4480)
• XSA-178 (CVE-2016-4963)
• XSA-180 (CVE-2014-3672)
• XSA-182 (CVE-2016-6258)
• XSA-185 (CVE-2016-7092)
• XSA-187 (CVE-2016-7094)
• XSA-188 (CVE-2016-7154)
16
What's New in Oracle VM Release 3.4.1?
17
Infrastructure
Local disk partitioning Interactive installations of Oracle VM Server allow you to configure disk
partitioning. See Installing Oracle VM Server From a DVD-ROM in the
Oracle VM Installation and Upgrade Guide for more information.
Enabling Kdump during Oracle During installation of Oracle VM Server, you can now choose to enable
VM Server installation the Kdump service that captures a memory dump from dom0 and stores
it on the filesystem to help you debug and diagnose issues in the event
of a system crash.
Infrastructure
Support for Oracle VM Virtual Oracle VM Manager now provides the ability to import and export
Appliances Oracle VM Virtual Appliances as a single .ova (Open Virtualization
Format Archive) file or a set of .ovf (Open Virutalization Format)
and .img (disk image) files. See How are Virtual Appliances Managed?
in the Oracle VM Concepts Guide for more information on virtual
appliances.
Note
Automated installation of VNC The Oracle VM Manager installer also manages the installation and
and Serial Console software upgrading of the VNC and Serial Console software package on the
Oracle VM Manager host. Reducing administrative overhead during a
deployment of the environment.
Storage live migration You can now perform live migrations of running virtual machines that
have virtual disks on local storage. Oracle VM uses features built into
the OCFS2 file system on x86 platforms to provide this live migration
capability that helps you achieve nearly uninterrupted uptime for virtual
machines.
18
Infrastructure
User interface ehancements for As of this release, when editing virtual disks, Oracle VM Manager now
virtual disk allocation displays the allocation type that was specified when the virtual disk was
created. Additionally, tooltips are available in the Oracle VM Manager
Web Interface to provide more information about how virtual disks
are created and how subsequent virtual disk space is allocated. See
Create Virtual Machine in the Oracle VM Manager User's Guide for
more information on creating virtual machines and virtual disk allocation.
Fiber Channel over Ethernet Oracle VM provides support for installing Oracle VM Server into FCoE
(FCoE) support Storage Area Networks (SAN) over some Host Bus Adapters (HBA) or
Converged Network Adapters (CNA). See Installing Oracle VM Server
to Multipath Storage in the Oracle VM Installation and Upgrade Guide
for more information.
Booting from UEFI Oracle VM Server can now boot from systems that use Unified
Extensible Firmware Interface (UEFI). See Installing Oracle VM Server
From a DVD-ROM in the Oracle VM Installation and Upgrade Guide for
more information about installing Oracle VM Server in UEFI mode.
You can install Oracle VM Server in legacy BIOS mode or UEFI mode.
However, you cannot change modes after installation. For example, if
you install Oracle VM Server in legacy BIOS mode, you cannot then
switch to UEFI mode. If you want to change from legacy BIOS mode
to UEFI mode, or from UEFI mode to legacy BIOS mode, you must re-
install Oracle VM Server.
• You cannot create custom partition layouts if you are installing Oracle
VM Server in UEFI mode.
• You cannot boot Oracle VM Server from FCoE or iSCSI if you use
UEFI mode.
SOAP API deprecated The Oracle VM SOAP API is deprecated as of Release 3.4.1.
Oracle VM Utilities use Oracle The Oracle VM Utilities version 2.1 now communicate directly with
VM Web Services API Oracle VM Manager using a Oracle VM API. This change improves
performance and usability of the Oracle VM Utilities. Additionally, in
this release, a number of the Oracle VM Utilities scripts have been
deprecated by the Oracle VM Manager Command Line Interface. For
more information, see Using the Oracle VM Utilities in the Oracle VM
Administration Guide.
P2V utility on Oracle VM Server This release includes the P2V utility on the Oracle VM Server ISO
ISO file file. You can use the P2V utility to convert physical hosts to virtual
machines. For more information, see Converting Physical Hosts to
Virtual Machines in the Oracle VM Administration Guide.
OSWatcher Utility Available on As of this release, the OSWatcher utility is installed on Oracle VM
Oracle VM Server Server by default and is enabled to run at boot. OSWatcher (oswbb)
is a collection of shell scripts that collect and archive operating system
19
Performance and Scalability
Repository apparent size Oracle VM Manager now displays the apparent size, in GiB, of
repositories. The apparent size is the total size of the entire repository.
For more information, see Repositories Perspective in the Oracle VM
Manager User's Guide.
dom0 kernel upgraded The dom0 kernel for Oracle VM Server is updated to Oracle
Unbreakable Enterprise Kernel Release 4 in this release.
Security
Improved character handling for Improvements to Oracle VM Manager allow for better handling of
filters characters used in filter fields to improve matching capabilities and to
provide improved protection against attempted SQL injection attacks.
Improved handling of user This release of Oracle VM includes changes to how user passwords
passwords are stored on the system so that they are not exposed on the command
line.
FIPS 140-2 Validation This release supports enabling FIPS mode for OpenSSL to be
compliant with Federal Information Processing Standard (FIPS)
20
Usability and Serviceability
Object topology view You can view graphical representations, and generate reports, of virtual
machine object nodes and attributes to quickly locate resources and
view information about those resources. See Display VM Hierarchy
Viewer in the Oracle VM Manager User's Guide for more information.
Context sensitive help Online help for Oracle VM now launches directly from elements in the
Oracle VM Manager Web Interface to the relevant help topics. This
online help system eliminates the need to navigate through help topics
to find information. See Help Icon in the Oracle VM Manager User's
Guide for more information.
User preferences Oracle VM Manager stores certain user preferences across sessions.
See User Preference Persistence in the Oracle VM Manager User's
Guide for more information about user preferences.
Simple names for repository Oracle VM Manager persists simple names for repository objects
objects as metadata. As a result, the simple names are retained when the
repository is transferred to a different instance of Oracle VM Manager.
Likewise, the metadata allows you to easily recover the simple names
in cases where Oracle VM Manager is manually restored without a
database backup. For more information, see How is Object Metadata
Stored in a Repository? in the Oracle VM Concepts Guide.
Generating XML reports Oracle VM Manager lets you generate XML reports on objects, the
object attributes, and direct subobjects. You can generate reports for
virtual machines, Oracle VM Servers, server pools, and storage. For
more information, see Reports in the Oracle VM Manager User's Guide.
Configuring database backups The Preferences tab in the Oracle VM Manager Web Interface lets
you set the interval for backing up the MySQL database and number of
backups to keep. For more information, see Preferences in the Oracle
VM Manager User's Guide.
Listing the locations of virtual Oracle VM Manager provides detailed information on the location of
machine disks virtual machine disks to facilitate backup tasks.
21
What's New in Oracle VM Release 3.3.5?
Monitoring Oracle VM Server This release provides an SNMP shared object module that lets you
through SNMP retrieve details about Oracle VM Server, monitor Oracle VM Server
health, and return a list of running virtual machines. See Monitoring
Oracle VM Server with SNMP in the Oracle VM Administration Guide for
more information on the Oracle VM Server shared object module.
Note
Viewing virtual machine Oracle VM lets you easily retrieve the configuration files for virtual
configuration files machines (vm.cfg).
Avoiding multiple physical disk Oracle VM provides detailed information about how physical disks are in
allocation use to avoid multiple physical disk allocation.
Virtual IP addresses for server The field to specify a virtual IP address (VIP) while creating a server
pools pool is deprecated in this release but available for backwards
compatibility.
• See Create Server Pool in the Oracle VM Manager User's Guide for
information on creating a server pool.
22
Performance
Performance
Oracle VM Manager performance enhancements
• This release enhances the performance of Oracle VM Manager by reducing the number of non-
critical events that are generated and stored in Oracle VM Manager, for example, server discover
scan and PortUp and PortDown events. (22894434 and 22894398)
• Support added for Microsoft Internet Explorer 11, ensuring that users can now access the Oracle VM
Manager Web Interface using this browser. (22163132)
Infrastructure
• Update to the dom0 Kernel: Updates the dom0 kernel to a newer Unbreakable Enterprise Kernel
Release 3 3.8.13-118.15.1.el6uek.x86_64.rpm.
• Package and library updates: The following changes apply to this release of Oracle VM:
Security
• Oracle MySQL patch update: This release of Oracle VM includes the October 2016 Critical Patch
Update for MySQL. (23087176)
• Oracle WebLogic patch update: This release of Oracle VM includes the October 2016 Critical Patch
Update for WebLogic. (23087171)
• Oracle Java patch update: This release of Oracle VM includes the October 2016 Critical Patch Update
for Java. (23087180)
23
Oracle VM Security Advisories
24
What's New in Oracle VM Release 3.3.4?
Infrastructure
• Oracle Unbreakable Enterprise Kernel (UEK) update: This release of Oracle VM includes UEK
Release 3 Quarterly Update 7 kernel-uek-3.8.13-118.
• Update to netfront and netback drivers: Along with UEK Release 3 Quarterly Update 7, this release of
Oracle VM delivers updates to the netfront and netback drivers.
• Package and library updates: The following changes apply to this release of Oracle VM:
• Updates to the irqbalance package: This release updates the irqbalance package to
irqbalance-1.0.9-2 so that interrupts are now better balanced across available dom0 CPUs to
improve network I/O performance.
• Multipath configuration for Oracle ZFS Appliance: This release includes the Oracle Sun ZFS Storage
7330 in the multipath.conf file.
25
Security
Security
• FIPS-Compliant OpenSSL Library Supported for Oracle VM Server: As of this release, it is possible
to install and configure the FIPS-compliant OpenSSL library on Oracle VM Server as per the instructions
provided in the Oracle Linux 6 Security Guide at:
http://docs.oracle.com/cd/E37670_01/
If you are following the instructions provided in the Oracle Linux 6 Security Guide, there is a step where
you enable FIPS in the kernel by editing /etc/grub.conf and adding the fips=1 option to the 'kernel'
line. For this to work on an Oracle VM Server, the fips=1 option must be added to the 'module' line
instead.
• Critical patch updates: This release of Oracle VM includes security fixes from critical patch updates for
Oracle WebLogic Server, Oracle Java 7, and Oracle MySQL.
• Ciphersuite update: The ciphersuite selection configuration is updated in this release of Oracle VM to
support a higher level of security.
26
What's New in Oracle VM Release 3.3.3?
27
Infrastructure
Infrastructure
• Support for Fibre Channel over Ethernet (FCoE): Oracle VM now includes drivers to detect
Converged Network Adapters (CNA). These drivers make it possible to install Oracle VM Server into an
FCoE SAN. (20140781)
• Maximum vCPU limit: The maximum vCPU limit of 128 for Oracle VM Server for SPARC is removed in
this release. (20576711)
• Support of Converged Network Adapters: The Oracle VM Server installer is updated in this release to
support more Converged Network Adapters (CNA) such as HP FlexFabric 10Gb 2-port 536FLB Adapter,
Broadcom 57840S CNA, etc. (20492419)
• Updated OvmClient.jar library: The corporate signing authority for the OvmClient.jar library has
been updated. (20488470)
• Oracle VM Server dracut packages: This release adds the dracut-fips package and the dracut-
network package to the Oracle VM Server ISO. This release also includes updates to the dracut-004
package and the dracut-kernel package. (20829905)
• Delete running jobs: The Oracle VM Manager upgrade script now allows you to delete running jobs so
that the upgrade can proceed. (20103466)
Networking
• Support for TCP-based NFS Repository Mounts: Repositories hosted on an NFS share are mounted
using TCP by default, with the option to failback to UDP, in this release. (14692942)
Performance
• Improved navigation performance in the Oracle VM Manager Web Interface: This release provides
improved performance when navigating to VLAN information. (20814204)
• Quicker response times in the Oracle VM Manager Web Interface Health tab: This release provides
improved performance when navigating through the Health tab. (20963394)
• Retrieving available servers for virtual machines: This release improves the time it takes to retrieve a
list of available servers for virtual machines. (20982855)
• Improved performance when expanding tree nodes in the Oracle VM Manager Web Interface: This
release provides improved performance when expanding a tree node that contains a large number of
servers. (20305165)
28
Security
Security
• Oracle MySQL patch update: This release of Oracle VM includes the April 2015 Critical Patch Update
for MySQL. (20916257)
• Oracle WebLogic patch update: This release of Oracle VM includes the April 2015 Critical Patch
Update for WebLogic. (20918659)
• Oracle Java patch update: This release of Oracle VM includes the April 2015 Critical Patch Update for
Java. (20918735)
• UEK3 quarterly update: This release of Oracle VM includes the UEK3 quarterly update 5. (20594222)
• Xen security advisories: The following Xen security advisories are included in this release:
• XSA-136 (CVE-2015-4164)
• XSA-134 (CVE-2015-4163)
• XSA-135 (CVE-2015-3209)
29
Performance
Performance
• Performance Monitoring: This release adds support for Oracle VM performance monitoring.
(19707131)
• Caching Job States: Oracle VM Manager Web Interface now caches the states of jobs to improve
performance. (19903847)
• CPU Load of the MySQL Process: Several performance improvements have been implemented to
lower the CPU load of the MySQL process. (19563329)
• Looking Up Objects by Name: Oracle VM Manager Web Interface provides improved performance
when looking up an object based on its name. (19482992)
• Virtual Machine Shutdown Time: Virtual machines now shut down faster, especially for virtual
machines with a large amount of memory. (18489484)
Usability
• Expanding Server Lists: Oracle VM Manager Web Interface is now more responsive and quicker when
expanding lists of Oracle VM Servers. (19879474 and 19385050)
• Scrolling through Large Tables: Oracle VM Manager Web Interface provides improved performance
when scrolling through large tables such as the Unassigned Virtual Machines folder. (19879459)
• Searching for Jobs: Oracle VM Manager Web Interface now provides results quicker when searching
for jobs. (19590118)
• Querying Statistics: Oracle VM Manager Web Interface provides improved performance when querying
Oracle VM Manager statistics. (19563481)
• Servers and VMs Tab Displays as Default: The Servers and VMs tab now displays when opening the
Oracle VM Manager Web Interface. (19429440)
• Opening Menu with Right Mouse Button: Oracle VM Manager Web Interface provides improved
performance when opening context menus with the right mouse button. (19402302)
• Prevent VNIC Changes for Running Virtual Machines: Oracle VM now includes a rule to prevent
virtual network interface card (VNIC) changes in the network while virtual machines are running.
(19644535)
• Discover Servers After Upgrade: This release adds support to discover Oracle VM Release 3.2
Servers after upgrading to Oracle VM Release 3.3. (19958455)
• Prevent Oracle VM Manager Upgrade with Running Jobs: Oracle VM now includes a rule to prevent
an upgrade of Oracle VM Manager when jobs are still running (19562031)
30
Infrastructure
Infrastructure
• Updated Virtual Machine Console: This release includes an updated virtual machine console package,
ovmcore-console-1.0-42, to the Oracle VM Manager installation ISO. (20138989)
• Import OVF 2.1 VM Templates: Oracle VM now provides support for importing Oracle VM Templates
that are created according to the OVF 2.1 specification. (19639096)
• Improved NUMA Support: Oracle VM provides improved NUMA support for PCI devices. (20088513)
• Xen Command Support: Adds support for the -p option to the xendomains/auto-start feature of Xen.
(20087455)
• Update to the dom0 Kernel: Updates the dom0 kernel to a newer Oracle Unbreakable Enterprise
Kernel Release 3 3.8.13-55.1.3.el6uek. (20028783)
• Update to OpenSSL Package: This Oracle VM Release includes the latest OpenSSL package.
(19933498)
• Support for Larger Number of Virtual CPUs: This Oracle VM release adds support for a larger number
of virtual CPUs. (19564352)
• Support for an HP Server: Oracle VM now supports installing Oracle VM Server on an HP DL580 G8
server. (19295185)
• Oracle Virtual Networking Package: This Oracle VM release adds the Oracle Virtual Networking user
package, orclovn-user-6.0.r7588-1, to Oracle VM Server. (19159220)
Security
This release includes the following Oracle VM Security Advisories:
Table 3.5 Oracle VM Security Advisories
Advisory Identifier Severity Description
OVMSA-2015-0022 Critical Oracle VM 3.3 glibc security update
OVMSA-2014-0018 Critical Oracle VM 3.3 bash security update
OVMSA-2015-0026 Important Oracle VM 3.3 xen security update
OVMSA-2014-0014 Important Oracle VM 3.3 nss security update
OVMSA-2014-0015 Important Oracle VM 3.3 nss-util security update
OVMSA-2014-0012 Important Oracle VM 3.3 openssl security update
OVMSA-2014-0023 Important Oracle VM 3.3 nss security update
OVMSA-2014-0021 Important Oracle VM 3.3 bash security update
OVMSA-2014-0017 Important Oracle VM 3.3 glibc security update
OVMSA-2014-0025 Important Oracle VM 3.3 xen security update
OVMSA-2014-0080 Important Oracle VM 3.3 libXfont security update
OVMSA-2014-0032 Important Oracle VM 3.3 openssl security update
OVMSA-2014-0038 Important Oracle VM 3.3 xen security update
OVMSA-2015-0031 Important Oracle VM 3.3 xen security update
OVMSA-2015-0034 Important Oracle VM 3.3 kernel-uek security update
OVMSA-2015-0036 Important Oracle VM 3.3 freetype security update
31
What's New in Oracle VM Release 3.3.1?
Programmability
• Fully Supported Web Services API: Oracle VM Manager now exposes a fully supported Oracle VM
Web Services API that offers both SOAP and REST interfaces to program any action supported within
Oracle VM. See the Oracle VM Web Services API Developer's Guide for more information.
Performance
• New Statistics and Events model: The statistics and events model has been entirely rewritten to offer
significant performance gains. A queued job task is in place to monitor the number of generated statistics
and to adjust the threshold automatically during periods where the number of statistics exceeds the
threshold.
• Oracle VM Server Notification Thresholding: Oracle VM Server notifications can increase the number
of generated events and jobs impacting on performance and filling log files to make them unusable. A
facility has been provided to control and limit the number of notifications that an Oracle VM Server can
generate by setting notification thresholds.
• Huge Page Support: Support for Huge Pages (or Super Pages) has been added to allow guests,
hosted on an x86-based server pool, to take advantage of this functionality to improve performance and
reduce the I/O that results from page lookups in virtualized environments. See Create Virtual Machine in
the Oracle VM Manager User's Guide for more information on Huge Page support.
32
Security
• Other Code Changes: Various portions of the code-base have been rewritten to enhance performance
in environments that have been scaled up to make use of many disks, storage repositories, Oracle VM
Servers or virtual machines.
Security
• Service Consolidation: The number of required ports open in a deployment, and the mechanisms
that are used for components to communicate have been reduced through the consolidation of various
services and the global use of the Oracle VM Web Services API. These changes reduce the number
of potential attack vectors available to malicious users. See the Oracle VM Security Guide for more
information.
• Certificate-based Authentication: The Oracle VM Agent now uses SSL certificates to authenticate
requests from Oracle VM Manager when an Oracle VM Server is discovered. This reduces the possibility
that a malicious user can perform a brute-force dictionary attack to authenticate against an Oracle
VM Server that is under the ownership of an Oracle VM Manager instance. Furthermore, certificate-
based authentication can be used for all Oracle VM Web Services API requests, to ease automation
while retaining a better security model for authentication. See the Oracle VM Security Guide for more
information on SSL in Oracle VM.
• Virtual Machine Configuration File View: It is now possible to view the virtual machine configuration
file for any virtual machine directly within the Oracle VM Manager Web Interface and Oracle VM
Manager Command Line Interface, to provide more transparency for the configuration that is actually
applied to a virtual machine when it is started by the hypervisor. See View Virtual Machine Configuration
File in the Oracle VM Manager User's Guide for more information on viewing the virtual machine
configuration file.
• Stack Trace Removal: The Oracle VM Manager Command Line Interface no longer has stack trace
information in job error messages. This makes it easier to read the more useful content of error
messages.
• Job Details Improvements: The Oracle VM Manager Web Interface job details view (displayed by
clicking the Details button in the Job Summary pane) has been improved with more appropriate
information, and stack trace information has been removed. The job stack trace information is still
available, but has been moved to to the Jobs view. See Job Details in the Oracle VM Manager User's
Guide for more information on job details.
Reliability
• Database Consolidation: Only the bundled Oracle MySQL Enterprise database is supported as a
back end repository for the Oracle VM Manager. Removal of support for other Oracle Database types
33
Networking
allows Oracle VM Manager to have more control over regular automated database backup, support for
database consistency checking tools, and other facilities required to improve reliability and performance.
Furthermore, by limiting support to the bundled database, it is possible to improve troubleshooting
documentation and tools.
• Database Object Consistency Checking: Tools are now in place to check the status of objects stored
within the database, along with their relationships and references. These tools can assist in tuning the
database and can help resolve potential database issues. Consistency checks are performed alongside
the automated backup facility.
• Inbound Migration Lock: A new feature allows you to protect an Oracle VM Server from attempts to
move or migrate other virtual machines to that server. This allows you to run selected virtual machines
on a specified Oracle VM Server, and to be certain that no other virtual machines are started on the
server, consuming resources that may be mission critical for some applications. See How Can I Protect
Virtual Machines? in the Oracle VM Concepts Guide for more information.
Networking
• Addition of Network Bridges and Virtual Switches to Model: The Oracle VM Manager core model
has been updated to provide better representation of network bridge and virtual switch objects as they
exist on each Oracle VM Server. This helps to resolve issues where bridges or virtual switches have
been created manually on an Oracle VM Server, and provides the mechanism to develop tools to better
handle bridge and virtual switch configuration. See Understanding Networks in the Oracle VM Concepts
Guide for information on network architecture.
• Improved VLAN Support: VLAN support has been completely restructured. The previous model, which
involved configuring VLAN Groups and VLAN Segments, was inflexible, confusing, and could sometimes
impact on the Management Network. VLAN support has been simplified, and introduces the concept of a
VLAN Interface, allowing you to simply define which ports are used for which VLAN tags. You can define
VLAN Interfaces as you need them and many of the restrictions on using VLANs have been removed.
See How are VLANs Used in Oracle VM? in the Oracle VM Concepts Guide for information on VLANs.
• Added Support for HTTP Proxies: Oracle VM Manager now has added support to define an HTTP
proxy to use when importing an assembly, virtual disk, or virtual CDROM. This change expands on the
ability to define a proxy when importing a template or virtual machine.
SPARC Support
• Support for iSCSI, Fibre Channel, ZFS and Local Disk for Virtual Machine Assignment: iSCSI and
Fibre Channel disks can now be discovered for SPARC systems, and can be directly assigned to virtual
machines running in a SPARC server pool. Configuring storage repositories on these disks is currently
not supported. Local disks, ZFS volumes and NFS exports can be discovered on SPARC systems and
can be used for repositories, or can be assigned for use by any virtual machine running on the same
server.
• Package Management and SPARC Upgrades: Added support for package management within
the Oracle VM Agent has made it possible to manage future SPARC server upgrades directly from
Oracle VM Manager. Changes to the upgrade tools within Oracle VM Manager allow you to define
Server Update Groups where you can specify the IPS repository that should be used to perform future
upgrades. See Creating Server Update Repositories in Oracle VM Manager in the Oracle VM Installation
and Upgrade Guide for information on creating Server Update Groups for SPARC.
• Support for HA Virtual Machines: Virtual machines running in a SPARC server pool can now be
configured for high availability if the storage for the server pool is using an NFS file system. See How
does High Availability (HA) Work? in the Oracle VM Concepts Guide for information on high availability.
34
Installation and Upgrades
• Improved Network Support: The following network functionality is now supported on Oracle VM Server
for SPARC systems:
• VLAN integration.
• Jumbo Frames and MTU configuration on network port and bond configuration.
Documentation
• New Guides and Improved Interface Coverage: The documentation has been restructured to provide
more comprehensive coverage. The Oracle VM Manager User's Guide has been structured to map more
directly onto the Oracle VM Manager Web Interface, to make it easier to find information in the context
of user interface related items. A new guide, the Oracle VM Concepts Guide, has been created to cover
more conceptual information, and to answer many more generic questions about the architecture and
configuration of an Oracle VM deployment. The previously named Oracle VM Utilities Guide has been
replaced with the Oracle VM Administration Guide, which provides broader coverage of all items relating
to the underlying administration of an Oracle VM deployment, including handling backups, configuring
SSL certificates and general troubleshooting. A new Oracle VM Web Services API Developer's Guide
has been created to provide some general guidelines, and an introduction to programming against the
Oracle VM Web Services API.
Infrastructure
• Infrastructure Changes in Oracle VM Manager: Much of the technology used to enable Oracle VM
Manager has been updated to take advantage of new features, improved performance and security
fixes. Major changes to these components include:
The Oracle VM Manager Web Interface and the Oracle VM Manager Command Line Interface have
been rewritten to use the new Oracle VM Web Services API to provide further consolidation.
• Infrastructure Changes in Oracle VM Server: Major changes to the underlying technology used for
Oracle VM Server on x86 hardware have been implemented, including:
• Linux kernel (used in dom0) updated to Oracle Unbreakable Enterprise Kernel 3 (UEK3).
35
What's New in Oracle VM Release 3.2.1?
• New Dom0 Kernel in Oracle VM Server for x86: The Dom0 kernel in Oracle VM Server for x86 has
been updated so that it is now the same Oracle Unbreakable Enterprise Kernel 2 (UEK2) as used
in Oracle Linux, for complete binary compatibility with drivers supported in Oracle Linux. Due to the
specialized nature of the Oracle VM Dom0 environment (as opposed to the more general purpose
Oracle Linux environment) some Linux drivers may not be appropriate to support in the context of
Oracle VM, even if the driver is fully compatible with the UEK2 kernel in Oracle Linux. Do not install any
additional drivers unless directed to do so by Oracle Support Services.
Installation
• MySQL Database Support: MySQL Database is used as the bundled database for the Oracle VM
Manager management repository for simple Installations. Support for an existing Oracle SE/EE
Database is still included within the installer so that you can perform a custom installation to take
advantage of your existing infrastructure. Simple Installation using the bundled MySQL Database is fully
supported within production environments.
• Discontinued inclusion of Oracle XE Databases: Oracle VM Manager no longer bundles the Oracle
XE database as a back end database. If you are currently running Oracle VM Manager using Oracle XE
and you intend to upgrade you must first migrate your database to Oracle SE or Oracle EE.
• Oracle VM Server Support Tools: A meta-package is provided on the Oracle VM Server ISO enabling
you to install packages to assist with support. These packages are not installed automatically as they
are Oracle VM Server does not depend on them. Installation of the meta-package and its dependencies
may assist with the resolution of support queries and can be installed at your own discretion. Note that
the sudo package was previously installed as a dependency for Oracle VM Server, but that this package
has now been made a dependency of the ovs-support-tools meta-package. If you require sudo on
your Oracle VM Server installations, you should install the ovs-support-tools meta-package.
Usability
• Oracle VM Manager Command Line Interface (CLI): The new Oracle VM Manager Command Line
Interface can be used to perform the same functions as the Oracle VM Manager Web Interface, such
as managing all your server pools, servers and guests. The CLI commands can be scripted and run
in conjunction with the Web Interface, thus bringing more flexibility to help you deploy and manage an
Oracle VM environment. The CLI supports public-key authentication, allowing users to write scripts
without embedding passwords, to facilitate secure remote login to Oracle VM Manager. The CLI also
includes a full audit log for all commands executed using the facility. See the Oracle VM Manager
Command Line Interface User's Guide for information on using the CLI.
• Accessibility options: Options to display the UI in a more accessible way for screen readers, improve
the contrast, or increase the font size. See Oracle VM Manager Accessibility Features in the Oracle VM
Manager User's Guide for more information.
• Health tab: Monitor the overall health and status of your virtualization environment and view historical
statistics such as memory and CPU usage. See Health Tab in the Oracle VM Manager User's Guide for
information on using the Health tab.
36
Usability
• Multi-select of objects: Select one or more objects to perform an action on multiple objects, for
example, upgrading multiple Oracle VM Servers in one step, rather than upgrading them individually.
See Multi-Select Functionality in the Oracle VM Manager User's Guide for information on using the multi-
select feature.
• Search for objects: In many of the tab management panes and in some of the dialog boxes you
can search for objects. This is of particular benefit to large deployments with many objects such as
virtual machines or Oracle VM Servers. See Name Filters in the Oracle VM Manager User's Guide for
information on using the search feature.
• Tagging of objects: It is now possible to tag virtual machines, servers and server pool objects within
Oracle VM Manager to create logical groupings of items, making it easier to search for objects by tag.
• Alphabetized tables and other UI listings: Items listed in tables and other UI listings are now
sorted alphabetically within Oracle VM Manager by default, to make it easier to find objects in larger
deployments.
• Present repository to server pools: In addition to presenting a storage repository to individual Oracle
VM Servers, you can now present a repository to all Oracle VM Servers in one or more server pools.
See Present or Unpresent Repository in the Oracle VM Manager User's Guide for more information.
• OCFS2 timeout configuration: An additional attribute has been added to allow you to determine the
timeout in seconds for a cluster when configuring a clustered server pool within Oracle VM Manager.
• NFS refresh servers and access lists for non-uniform exports: For NFS configurations where
different server pools are exposed to different exports, it is now possible to configure non-uniform
exports and access lists to control how server pool refreshes are performed. For more information on
this feature, see Access Groups Perspective in the Oracle VM Manager User's Guide.
• Configure multiple iSCSI access hosts: You can now configure multiple access hosts for iSCSI
storage devices
• Sizes of disks, ISOs and vdisks: Oracle VM Manager now shows the sizes of disks, ISOs and vdisks
within the virtual machine edit dialog, to make it easier to select a disk.
• Automated backups and easy restore: Oracle VM Manager installations taking advantage of the
bundled MySQL Enterprise Edition Database include fully automated database backups and a quick
restore tool that can help with easy database restoration.
• Serial console access: A serial console java applet has been included within Oracle VM Manager to
allow serial console access to virtual machines running on both SPARC and x86 hardware. This facility
complements the existing VNC-based console access to virtual machines running on x86 hardware.
• Set preferences for recurring jobs: Facilities have been provided within Oracle VM Manager to control
the preferences for recurring jobs. These include the ability to enable, disable or set the interval for tasks
such as refreshing repositories and file systems; and to control the server update repository checking
task.
• Processor Compatibility Groups: Since virtual machines can only be migrated between servers that
use compatible processor types, Oracle VM Manager now provides the ability to define Processor
Compatibility Groups to enable you to pick which servers a virtual machine can be migrated between.
• Configure additional Utility and Virtual Machine roles: New roles are now supported on Oracle VM
Servers to control the type of functionality that the server will be responsible for. The Virtual Machine role
is required in order for an Oracle VM Server to run a virtual machine. Oracle VM Servers configured with
the Utility role are favoured for performing operations such as file cloning, importing of templates, the
creation of repositories, and other operations not directly related to running a virtual machine.
37
What's New in Oracle VM Release 3.1.1?
• Directly import a virtual machine: It is now possible to directly import a virtual machine using Oracle
VM Manager, no longer requiring that you first import to a template and then clone.
• Virtual machine start policy: You can now specify a start policy for a virtual machine, determining
whether to always start the virtual machine on the server on which it has been placed, or to start the
virtual machine on the best possible server in the server pool.
• Hot-add a VNIC to a virtual machine: It is now possible to add a VNIC directly to a running virtual
machine from within Oracle VM Manager.
• Send messages to a virtual machine: Facilities have been provided within Oracle VM Manager to
send messages directly to a virtual machine in the form of key-value pairs.
• NTP configuration: Ensuring that time is synchronized across all servers is important. Oracle VM
Manager now provides a facility to bulk configure NTP across all servers.
• New Dom0 Kernel in Oracle VM Server for x86: The Dom0 kernel is now the same Oracle
Unbreakable Enterprise Kernel 2 (UEK2) as used in Oracle Linux, for complete binary compatibility with
drivers supported in Oracle Linux. Due to the specialized nature of the Oracle VM Dom0 environment
(as opposed to the more general purpose Oracle Linux environment) some Linux drivers may not be
appropriate to support in the context of Oracle VM, even if the driver is fully compatible with the UEK2
kernel in Oracle Linux. Do not install any additional drivers unless directed to do so by Oracle Support
Services.
• Jumbo Frames Support: Fully supports different MTU sizes. See Create Bond Port in the Oracle VM
Manager User's Guide for information on setting the network MTU size.
• LUN Resizing: A LUN (either used as a storage repository or a server pool file system) also resizes the
OCFS2 file system.
• Move OCFS2 Repositories Between Server Pools: Remove an OCFS2 storage repository from one
server pool and add it to another. The process of moving a storage repository from one server pool to
another has been streamlined to facilitate easier disaster recovery and more storage agility.
Installation
• Multipath Boot from SAN: Oracle VM Server can be installed to perform boot from multipath SAN
without requiring any type of local storage.
Usability
• Create Virtual Machine Templates: Virtual machines can be cloned as templates, templates can be
used to create other templates, and a template can be created in a similar way as creating a virtual
38
What's New in Oracle VM Release 3.0.3?
machine using a wizard. See Clone a Virtual Machine or Template in the Oracle VM Manager User's
Guide for information on creating virtual machine templates.
• Clone Virtual Machines and Templates: Cloning a virtual machine or template (including the
configuration information, disk resources, storage and networking). See Clone a Virtual Machine or
Template in the Oracle VM Manager User's Guide for more information on moving and cloning virtual
machines and templates.
• Hot Add vCPUs: Add virtual CPUs on the fly to a running virtual machine. See Edit Virtual Machine in
the Oracle VM Manager User's Guide for information on editing a virtual machine and adding vCPUs to a
running virtual machine.
• Discover Multiple Oracle VM Servers Using Hostnames and IPs: Discover Oracle VM Servers by
entering or pasting in multiple hostname or IP addresses in a text field, instead of entering each IP
address individually. See Discover Servers in the Oracle VM Manager User's Guide for information on
discovering Oracle VM Servers.
• Virtual Machine Keyboard Mapping: Support for keyboard mapping for different languages for each
individual virtual machine, not just for the server pool. See Create Virtual Machine in the Oracle VM
Manager User's Guide for information on the keyboard mapping when creating a virtual machine.
• Virtual Machine Console: If the a virtual machine console is in use by another user, you can take over
control of the virtual machine console. See Launch Console in the Oracle VM Manager User's Guide for
information on the virtual machine console.
• User Interface Enhancements: Significant user interface enhancements improve ease of use, make
work flows more intuitive, and reduce the amount of clicks required to perform tasks. See Using Oracle
VM Manager in the Oracle VM Manager User's Guide for information on the Oracle VM Manager user
interface.
• Drag and Drop: Objects can be dragged and dropped in the user interface. See Drag and Drop in the
Oracle VM Manager User's Guide for information using the drag and drop feature.
• Change Oracle VM Agent Password: The Oracle VM Agent password for all Oracle VM Servers in a
server pool can be changed from Oracle VM Manager.
Installation
• Maintain Oracle VM Manager Identity After Reinstall: See Installing Oracle VM Manager in the Oracle
VM Installation and Upgrade Guide for information on how to reinstall Oracle VM Manager and maintain
the previous UUID.
Usability
• User Interface: Improved wizards to allow smooth operation and closely match operational needs.
39
What's New in Oracle VM Release 3.0.2?
• Virtual Machines: Explicitly set maximum memory when creating virtual machines. Flexibility to update
virtual disk attributes. Choose thick or thin provision. CDROM dynamic update. Virtual machine console
does not require username/password. See Understanding Virtual Machines in the Oracle VM Concepts
Guide for information on these new virtual machine features.
• Live Migration Assistant: During live migration, only allowed target Oracle VM Servers can be selected
in the Live Migration dialog box. An additional section entitled Why don't I see other servers to migrate
to? shows why migrating to a given server is not possible. Anti-affinity and hardware factors such as
CPU family are taken into account.
• Maximum Guest Memory: The new Create Virtual Machine wizard contains a maximum memory
setting. This is the maximum amount of RAM you can configure for the running virtual machine.
• Updated Dom0 Linux Kernel with Newer Drivers: Better hardware support for higher performance,
with the latest Unbreakable Enterprise Kernel.
• Improved Scalability: Capable of supporting Oracle VM Servers with up to 160 CPUs and 2 TB
memory.
• Updated OCFS2 1.8 Cluster File System: Instant clone support in OCFS2 1.8 enables significantly
faster virtual machine provisioning and cloning.
• Support for OVF: Use Oracle VM Manager to import a broad range of Open Virtualization Format
(OVF) based software assemblies produced by Oracle to accelerate application deployment. See How
are Virtual Appliances Managed? in the Oracle VM Concepts Guide for information on working with
assemblies.
• Storage Configuration and Management: The Oracle VM Storage Connect framework enables Oracle
VM Manager to directly access the resources and functionality of existing storage systems, supporting
native storage services such as SAN or NFS storage creation, deletion, expansion. This allows Oracle
VM Manager to automatically discover available storage and create new storage repositories, or to map
raw storage directly to virtual machines. See Storage Tab in the Oracle VM Manager User's Guide for
information on storage management.
40
Policy-Based Resource Management
object, such as port up/down status. IP address and other configuration information is displayed directly
in the user interface.
Note
Not all metrics are exposed through the Oracle VM Manager user interface.
• Distributed Power Management (DPM) to Optimize Server Pool for Minimum Power Consumption:
DPM complements DRS to reduce the Oracle VM Servers in a server pool when there are periods of low
resource utilization. DPM can automatically add capacity as needed when resource utilization increases.
See What are Server Pool Policies? in the Oracle VM Concepts Guide for information on using DRS and
DPM.
Usability
• User Interface: Based on the latest Oracle Application Development Framework (ADF), Oracle VM
Manager now includes a fully interactive tree view and automatic refresh to show the real-time state of
the physical and virtual environment. See Using Oracle VM Manager in the Oracle VM Manager User's
Guide for information on using the new user interface.
• Virtual Machines: Specify the boot order (for example: disk, CDROM) to simplify installs. Directly attach
raw storage or virtual disks (vdisks). See Understanding Virtual Machines in the Oracle VM Concepts
Guide for information on virtual machines.
41
42
Chapter 4 Notable Bug Fixes
Table of Contents
4.1 Bug Fixes in Oracle VM 3.4.4 ..................................................................................................... 43
4.2 Bug Fixes in Oracle VM 3.4.3 ..................................................................................................... 44
4.3 Bug Fixes in Oracle VM 3.4.2 ..................................................................................................... 45
4.4 Bug Fixes in Oracle VM 3.4.1 ..................................................................................................... 46
4.5 Bug Fixes in Oracle VM 3.3.5 ..................................................................................................... 47
4.6 Bug Fixes in Oracle VM 3.3.4 ..................................................................................................... 48
4.7 Bug Fixes in Oracle VM 3.3.3 ..................................................................................................... 49
4.8 Bug Fixes in Oracle VM 3.3.2 ..................................................................................................... 51
4.9 Bug Fixes in Oracle VM 3.3.1 ..................................................................................................... 52
4.10 Bug Fixes in Oracle VM 3.2.1 ................................................................................................... 55
4.11 Bug Fixes in Oracle VM 3.1.1 ................................................................................................... 56
4.12 Bug Fixes in Oracle VM 3.0.3 ................................................................................................... 56
Each Oracle VM release includes bug fixes that improve performance, usability, or resolve significant
issues. Because each release contains many bug fixes, it is beyond the scope of this document to provide
an exhaustive list of each bug fix. Rather, this chapter highlights the more notable bug fixes in each
release.
• Fixes an issue where the Oracle VM Manager pre-upgrade script fails with the following error message:
cannot concatenate 'str' and 'javainstance' objects. (25896467)
• Fixes an issue where Microsoft Windows guest virtual machines fail to migrate. (25801187)
• Fixes an issue where VNICs are displayed in the incorrect order when using the Oracle VM Manager
Web Interface to edit a virtual machine with multiple VNICs. (25249076)
• Fixes an issue where it is not possible to delete storage repositories when error messages indicate that
the storage device is busy and Oracle VM Server cannot unmount the file system for the repository.
(26427886)
• Fixes an issue so that dom0 can reclaim space on the file system when a user domain makes space
available. (25342487)
• Reduces the amount of time it takes to start virtual machines with large amounts of memory. (25860374)
• Fixes an issue where additional memory is incorrectly allocated to virtual machines when they are
restarted. (26396728)
• Fixes an issue where removing block devices results in unresponsive behavior. (25498155)
43
Bug Fixes in Oracle VM 3.4.3
• Fixes an issue where it is not possible to add VNICs to running virtual machines after they are migrated.
(25692157)
• Fixes an issue where virtual machines do not restart after stopping unexpectedly. (25729452)
• Fixes an issue where the operation to add or remove a VLAN exits with error messages instead of
indicating if the VLAN already exists. (25796887)
• Fixes an issue in cases where Xen kernel panics occur when the Kdump service restarts. (25861742)
• Fixes an issue where it is not possible to create repository exports on Oracle VM Server. (26244801)
• Fixes an issue where the default maximum number of grant frames and PIRQs numbers for dom0 and
user space domains must be increased. (26338166)
• Fixes an issue where Link Local Discovery Protocol (LLDP) packages are enabled by default on Oracle
VM Server. These packages are not required, and are disabled by default in this release. (25254072)
• Fixes an issue where the Oracle VM Server discovery process fails due to the Oracle VM Manager Yum
repository configuration. (25107129)
• Fixes an issue where Desktop Bus (D-Bus) support is not available as part of the libvirt package that
is supplied with Oracle VM Server. (25035614)
• Fixes an issue where you are unable to configure CPU pinning for a running virtual machine. As a result,
there is no longer a requirement to stop and then start the virtual machine for the configuration to take
effect. (24938500)
• Fixes an issue where the Oracle VM Agent is unable to distinguish local root disk partitions from LUN
disk names when there are a large number of LUNs on the system. (25261502)
• Fixes an issue where slow response times are encountered when rescanning physical LUNs on Oracle
VM Servers. (25105813)
• Fixes an issue where the vmcore memory size on the Management Domain (dom0) exceeds the total
memory allocated to the dom0 . (24842742)
• Fixes an issue where instances of Oracle VM Server are not booting after installation to LUN targets
larger than 2TB in size. (24811512)
• Fixes an issue where Guest VM creation is slow due an issue in the XENMEM_populate_physmap
macro resulting in Xend 100% CPU usage. (24738858)
• Fixes an issue where MD RAID devices are disabled during Oracle VM Server upgrades. (24676299)
• Fixes an issue where importing a compressed virtual machine template may result in large system image
files once the templates are unpacked. (23594530)
• Fixes an issue where you are unable to create Kickstart configurations that assemble software RAID
devices during the Oracle VM Server installation. (22204542)
• Fixes an issue where Oracle VM Server is unable to present software RAID devices to Oracle VM
Manager. (21910748)
44
Bug Fixes in Oracle VM 3.4.2
• Improves prompts used when changing the password for the MySQL root password to ensure
instructions are clear. (25485730)
• Fixes an issue where you are unable to update the MySQL root password in the database so that
it matches the MySQL root password that you set with the Oracle VM Manager Administrator Tool.
(22973573)
• Fixes an issue where the Edit Virtual Machine dialog does not load vNICs in the correct order.
(25904204)
• Fixes an issue where the Export to Excel option on the Jobs tab is unresponsive. (24805469)
• Fixes an issue where you may experience delays when rescanning physical disks from Oracle VM
Manager. (25073132)
• Fixes an issue where Oracle VM Manager miss-interprets the on_crash parameter in the vm.cfg when
the repository is refreshed. (25060508)
• Fixes an issue where Oracle VM ULN and public ULN channels do not contain the latest tzdata package.
The tzdata package is now updated to tzdata-2017b-1.el6.noarch.rpm. (24847941)
• Enhances the Oracle VM Agent to automatically include existing vSwitches to the Oracle VM Agent
network database. (18508248)
• Fixes an issue where memory release is unacceptably slow during graceful VM shutdown. (20816669)
• Fixes an issue where the Kdump service fails to start on the user domain (domU). (19807079)
• Fixes an issue where multiple sets of PortUp and PortDown events are unnecessarily generated
when a server is discovered or when the port on a server goes up or down, resulting in a slow down in
performance on Oracle VM Manager. (23738392)
• Fixes an issue where duplicate server scan events are generated when re-discovering a server, resulting
in a slow down in performance on Oracle VM Manager. (2888398)
• Updates to the Oracle VM Utilities to resolve some issues are now posted on My Oracle Support (MOS)
at patch 13602094. (24303705, 24300124, 24300120)
• Enables network configuration operations on a Xsigo port for Oracle Private Cloud Appliance.
(22694975)
• Fixes an issue where the block hotplug script does not account for gaps in used Loop devices.
(22875089)
• Fixes an issue where some Oracle VM Manager jobs fail with operations on Dell Storage with Dell
multipath.conf. (22909259)
• Adds the libxenstore and libxenstore-devel packages to the addons channel for the Oracle
Linux Yum Server, so they can be used with Oracle Linux 6 guests. (22909892)
• Fixes an issue where it takes an excessive amount of time to release memory from a guest during a live
migration. (23095319)
• Adds a new command to add, delete, or show routes on a given interface from the Oracle Private Cloud
Appliance User Interface. (23154685)
45
Bug Fixes in Oracle VM 3.4.1
• Fixes an issue where a server cluster failure occurs in some cases during a server reboot, when
managing a large number of LUNs. (23169165)
• Fixes an issue where the VM console in the Oracle VM Manager Web Interface hangs during some live
migration events. (23253588)
• Fixes an issue where a DNS Round-Robin configuration forces NFS to be mounted multiple times due to
multiple IP assignments. (23577814)
• Enhancement added to the Xen hypervisor that makes devices assignable and unassignable.
(23749204)
• Adds /etc/grub.d/30_linux to the Oracle VM Server installation to enable bare metal Linux installs
for some Cloud operators. (24348702)
• Fixes an issue where a VM cannot start due to frequent duplicate Xend child processes. (24371183)
• Fixes an issue where GRUB2 does not inherit the crashkernel parameters when upgrading Oracle
VM Server from Release 3.2.x or 3.3.x to Release 3.4.2. If you have manually installed and configured
the kdump service on Oracle VM Server Release 3.2.x or Release 3.3.x, and you then upgrade Oracle
VM Server to Release 3.4.1, the kdump service no longer functions. See Confirm kdump Service
Settings after Upgrading in the Oracle VM Installation and Upgrade Guide. (24512683)
• Fixes an issue with yum upgrades from 3.2.10 or 3.2.11 due to the removal of the ql2xxx-firmware
from Oracle VM Release 3.4. (24529773)
• Fixes a Kdump failure and kernel panic in Oracle Server X5-8 with the QLogic 25Gb NIC. (24554631)
• Fixes an issue where several VM related jobs cannot complete after an upgrade from Oracle VM
Release 3.3.x. (23134128)
• Fixes an issue where a user is unable to set more than 512GB of memory for Solaris 11 guests on
Oracle VM Server for SPARC. (23206373)
• Fixes an issue where some upgrades fail with the following message: Error upgrading
core database, upgrade cannot continue! and the following entry in the log files:
UpdateUserAndCertEntities does not exit. (23283190)
• Fixes an issue where a user is unable to discover a server using the Oracle VM Manager Web Interface
due to the use of uppercase alphabetic characters in the UUID. (23635359)
• Fixes an issue where a user cannot login to Oracle VM Manager with an AUTHORIZED_GROUP and is
using Microsoft Active Directory authentication. (23744937)
• Fixes an issues where the Oracle VM Manager upgrade terminates in some cases shortly after running
the ovm_preUpgrade script. (24009772)
46
Bug Fixes in Oracle VM 3.3.5
Oracle VM Manager build 1369 is an errata update for the Release 3.4.1 build 1350. Build 1369 offers fixes
for bugs that were identified after build 1350 was released. Oracle VM Manager Release 3.4.1 build 1369
has been validated in combination with Oracle VM Server Release 3.4.1 build 1351 and Oracle VM Agent
for SPARC Release 3.4.1 build 1350.
Notable bugs fixed in Oracle VM Manager Release 3.4.1 build 1369 are as follows:
• Fixes an issue where the upgrade does not complete when VM origin URLs or network install path is
greater than 512 characters. (23003986)
• Fixes an issue where OVA files with URLs that are greater than 512 characters cannot be imported.
(23012337)
• Fixes an issue where the user cannot proceed beyond the web UI login prompt after successfully
entering user credentials. (23017746)
• Fixes an issue where in some cases the pre-upgrade script fails with an error “cannot concatenate 'str'
and 'javainstance' objects”. (23031621)
• Fixes an issue where the logs get loaded with “Data too long for column” entries. (24848792)
• Fixes an issue where the ovs-agent logs get loaded with “Event queue is full” entries, causing Oracle
VM Manager jobs to hang. (24841984)
• Fixes an issue where some upgrades from Oracle VM Server Release 3.2.10 fail with “Transaction
Check” errors. (24510423)
• Fixes an issue where in some cases a virtual machine migration may fail with Oracle VM Agent for
SPARC. (24486936)
• Fixes an issue where two pop-up menus are displayed incorrectly when you right click on the VNC
console display area. (23247656)
• Fixes an issue where in some cases the upgrade script fails with the message “Server upgrade in
progress”. (22746573)
• Fixes an issue where the OVMModelDump fails to retain tag information when rebuilding Oracle VM
Manager. ( 22741229)
• Fixes an issue where in some cases the Oracle VM Manager upgrade fails with the message
“AttributeError: getSummaryDisplayStatus”. (22660433)
• Fixes an issue where in some cases the repository cannot be refreshed and the following message is
displayed: “DOM0 has invalid exports”. 22616221
• Fixes an issue where discovery of Oracle VM Server on Fiber Channel over Ethernet (FCoE) LUN fails
due to the interface name appended with -fcoe. (22584539)
• Fixes an issue where problems may occur when doing a UI refresh in some scenarios. (22270904)
• Fixes an issue where a DNS entry is removed after discovering Oracle VM Server. (25353998)
• Fixes an issue where very slow response times are encountered when re-scanning ISCSI physical LUNS
on Oracle VM Server. (25176548)
47
Bug Fixes in Oracle VM 3.3.4
• Fixes an issue where Oracle VM Server is slow to create a virtual machine, resulting in Xend 100% CPU
usage. (24738894)
• Fixes an issue where in some cases Xend hangs with a high CPU utlization. (24376707)
• Fixes an issue with statistics validation that results in statistics being dropped. (24369962)
• Fixes an issue where a virtual machine cannot start due to frequent duplicate Xend child processes.
(23625563)
• Fixes an issue where the block hotplug script does not account for gaps in used loop devices.
(23269321)
• Fixes an issue where bondport names are changed after Oracle VM Server is deleted and then re-
discovered. (23193644)
• Fixes an issue where the kdump service for Oracle VM Server on an Oracle Sun Server X4-4 with a
QLogic QLE2562 Host Bus Adapter (HBA) requires the nox2apic kernel parameter. (22729287)
• Fixes an issue where a DNS Round-Robin configuration forces NFS to be mounted multiple times due to
multiple IP assignments. (22683343)
• Fixes an issue with Netra X5-2 where 40G Ethernet interfaces (i40e) goes into an up and down loop
status after adding bond0 to the bridge. (22605450)
• Fixes an issue with two instances of the same virtual machine running on different servers under a heavy
load. (22393202)
• Fixes an issue where installations are not possible on an instance of Oracle VM Server with more than
4TB of memory. (21219500)
• Fixes an issue with LACP bond mode with 1GB NIC and with dom0_max_vcpus=20. (20745556)
• Fixes an issue where the LRO setting should remain disabled if all the VLAN interfaces are not removed
from a bridge. (20466383)
• Fixes an issue where the Oracle VM Agent for SPARC fails to start after a reboot on T7 servers.
(25106965)
• Fixes an issue where the Oracle VM Agent for SPARC upgrade from 3.2.10 may fail in certain cases
with an active guest domain. (22651391)
• Fixes an issue where Oracle VM Agent for SPARC on Oracle Solaris displays the message: “Numeric
value (n) out of range of long (-x – y)” (24575522)
• Resolves a problem where in some cases that an Oracle VM Manager event (ArchiveTask) does not
have the proper status. (22300975)
• Fixes a problem with the UI where in some cases the parent job is marked as completed in the job
summary; however, the children jobs are still running. (22101966)
48
Bug Fixes in Oracle VM 3.3.3
• Corrects a problem where the database backup hangs on an upgrade if there is a root keystore.
(21804503)
• Corrects a problem that Oracle VM Manager failed to be installed on Oracle Linux 6.7. (21548314)
• Sets the default CLI client inactivity timeout value to 45 minutes to allow for the copy of large files.
(21547396)
• Fixes an issue where the Java processes grow very large with many VMs. (21368302)
• Enhances the periodic database cleanup process when it is unable to keep up with many VMs and the
database grows over time. (21320889)
• Enhances the discovery process by dropping invalid Page83 ID events from the Server. (21121751)
• Fixes an issue that prevents users to add more than 4 virtual disks to Solaris 10 guest (Oracle Solaris 10
1/13) with the domain type Xen_HVM_PV_Drivers. (20626989)
• Fixes a compatibility issue in Oracle VM Agent database (Berkeley DB) during the server upgrade.
(22821483)
• Fixes a problem where a PVHVM guest cannot start when Xen virtual disk is on the driver domain.
(22242513)
• Fixes a problem that Oracle VM Server installation failed on the HP BL465C GEN8. (21906833)
• Fixes a problem that HVM guest failed to launch using xl command. (21748894)
• Fixes a Xen hypervisor bug that caused race condition under certain situation. (21544772)
• Fixes an issue where kdump was not working when X2APIC is set to "enable". (21197271)
• Fixes an issue where the LRO setting should be disabled when the interface is part of a bridge.
(20390557)
• Fixes a problem where the kickstart installation failed for a specific VLAN interface. (20011623)
• Fixes an issue where rebooting a large VM (256G memory and higher) took over 4 minutes. (19731529)
• Fixes a problem where a VM cannot be started when the images are stored on the NFS server of
another VM. (18889929)
• Resolves an issue where the Oracle VM Agent does not come up with Python 2.7 which is the default for
Solaris 11.3. (21976240)
• Fixes a problem where the Manager was unable to discover a SPARC server with a virtual switch.
(21302405)
• Disables the transitional YUM repository temporarily during an upgrade to ensure a successful upgrade
between Oracle VM Server 3.3.x errata releases. (20330043)
49
Bug Fixes in Oracle VM 3.3.3
• Fixes an issue in the statistic query builder for the file system. (20364416)
• Fixes a problem with the upgrade script that was causing it to fail after the first step in the process.
(20372446)
• Fixes a null pointer exception error with Page83 when attempting to delete a server from a pool or
model. (20373362)
• Fixes a problem where resizing existing LUNs did not always work. (20397450)
• Fixes a problem with an SSL handshake exception when adding a customer SSL certificate. (20702236)
• Fixes a server sorting problem in the navigation panel in the Oracle VM Manager Web Interface.
(20814532)
• Fixes an issue where the console did not display information about virtual machines after an upgrade.
(20828842)
• Fixes an issue where user was not able to register multiple storage arrays. (20958122)
• Fixes an error condition where sometimes after rebooting a virtual machine, an ext4 filesystem error is
displayed. (19357800)
• Fixes long server discovery time with a large number of disks on Oracle VM Server for SPARC.
(20158892)
• Fixes Discover_Network failure with “no device found for vswitch” message on Oracle VM Server for
SPARC. (20593971)
• Disables GRO on new installs when routing/bridging with IXGBE driver. (19514003)
• Fixes an issue with a VLAN created over a bond, where it may not come up on restart if the MAC
address of the bond changes. (19802253)
• Fixes an issue where dom0 kernel reported "Can't map rx data" with bnx2x 10Gb NICs (20397398)
• Fixes a problem where refreshing a file server would sometimes return the error message "too many
values to unpack". (20510340)
• Fixes an issue when upgrading from Oracle VM Server 3.2 the ETHTOOL_OFFLOAD_OPT parameter
name changed to ETHTOOL_OPTS in ifcfg files. (20526276)
• Fixes a problem with select hardware configurations where dom0 does not come back online after a
reboot. (20659992)
• Fixes an issue where guests were not shutting down correctly. (20663386)
• Fixes a problem where a Brocade HBA does not detect storage and shows the error "kernel: Can't locate
firmware cbfw-3.2.3.0.bin". (20682061)
• Fixes an intermittent issue where a virtual machine would not bootup after a successful shutdown.
(20781679)
• Fixes an issue where InfinBand Virtual Functions were being put "Out of Service" when large virtual
machines were being started or shutdown. (21133414)
50
Bug Fixes in Oracle VM 3.3.2
• Fixes a problem where memory release was slow during a graceful shutdown of a virtual machine.
(21133543)
• Fixes a problem when rebooting a large virtual machine takes a long time and causes the XM CMD to
hang. (21133626)
• Fixes an issue where Live Migration with the -SSL option fails with a bad descriptor error. (21269578)
• Fixes an issue that causes network discover to fail when Oracle VM Agent for SPARC is installed on
Oracle Solaris 11.2 under certain configuration. (20646623)
• Fixes an issue that causes changing the MTU to fail when the dlmp service is enabled. (20185577)
• Fixes an issue that causes the action of taking ownership to fail when the control domain runs Oracle
Solaris 11.2. (20185575)
• Fixes an issue that causes Oracle VM Agent for SPARC to fail on Oracle Solaris 11.2 control domain.
(18371968)
• Fixes a server upgrade issue where fba (Brocade Fibre Channel HBA Driver) is not loaded for the FC
slots. (20729090)
• Fixes an issue where the virtual machine status shows "domain-unnamed" after live migration. The fix is
delivered with newer Xen package (xen-4.3.0-55.el6.22.18 or later). (20687187)
• Fixes an issue that live migration from earlier Oracle VM Server versions to 3.3.2 leaves Linux PVHVM
guest in a hung state. The fix is delivered with newer Xen package (xen-4.3.0-55.el6.22.18 or later).
(19517860)
• Fixes an issue that idle virtual machines may use more CPU resources than they need. (20138111)
• Fixes "unauthorized access" errors when an Oracle VM Server has been removed from a clustered
server pool. (19725961)
• Fixes an issue where the virtual machine cannot ssh to a server located outside the Oracle VM
environment. (19589497)
• Fixes the issue where an HVM guest may reboot under certain configuration. (19440731)
• Fixes the issue where a PXE boot installation fails when there is no DNS resolution. (19181050)
• Fixes an issue where Oracle VM Server cannot be installed on a server that has a LUN attached with a
Windows file system. (19173545)
• Fixes an issue that caused some other software installation to fail. (19181087)
• Fixes a user interface issue when cloning Oracle VM templates using Internet Explorer 9. (20077741)
51
Bug Fixes in Oracle VM 3.3.1
• Fixes an issue with the SOS Report Tool to include the vm.cfg files and Ethtool data. (19952640)
• Fixes the issue where the VM START ON BEST Server Policy does not balance the load correctly.
(19982628)
• Fixes a time-out issue for Oracle VM Manager Web Services during long-running operations. (19788626)
• Fixes the issue where a successfully launched Job is killed after multiple launch attempts. (19636855)
• Fixes an issue to show the correct virtual machine console of the selected virtual machine. (19590077)
• Fixes the issue where adding an Oracle VM Server that has its management network interface in a
VLAN, didn't add the IP address and hostname to the /etc/hosts file. (19587036)
• Fixes an upgrade issue where the MTU is inconsistent between the Bridges and the Virtual Interfaces
(VIFs). (19241260)
• Fixes the issue that some special characters were not handled correctly when using Firefox browser to
access the serial console. (19187642)
• Fixes the issue where non-sparse Virtual Disks became sparse after resizing them via the Oracle VM
Manager. (19146857)
• Fixes the issue where sparse copying of virtual disks did not work in SPARC environments. You must
run Oracle Solaris 11.2 or greater within the control domain. (14851945)
• Fixes the issue where Oracle VM Manager shows the disk size as 0 when using multipath devices and
the first device in the list is passive. (19131600)
• Fixes the issue that the serial console fails to display long entries correctly. (18969505)
• Fixes the issue of non-US keyboard mapping when accessing virtual machine console. (18089107)
• Fixes the issue that the cursor is not displayed in the serial console for SPARC guest. (18085387)
• Includes the latest critical patch update for Weblogic from October 2014. (19346370)
• Fixes an issue with uninstalling Oracle WebLogic Server during uninstalling Oracle VM Manager.
(16203060)
• Fixes an issue where the Oracle VM Manager does not initialize after installing and starting it.
(16202979)
• Fixes an "Object Not Found" exception when deleting a file system mount. (17219387)
52
Bug Fixes in Oracle VM 3.3.1
• Fixes an issue where it is not possible to upgrade due to a JDBC connection error. (17250224)
• Fixes a performance issue to speed up the discovery process of a physical LUN. (17447037)
• Fixes an issue to properly handle duplicated storage initiators when deleting an Oracle VM Server.
(17263779)
• Adds support to specify the network ID when editing a Virtual NIC via the Oracle VM Manager Command
Line Interface. (17294253)
• Fixes an issue in which VLAN objects were deleted during discovery. (16886580)
• Fixes the failure which occurred when trying to add more than four disks on Solaris 10. (16939432)
• Fixes an issue where ISCSI log out fails with the error "FAILED TO DELETE NODE RECORD FOR
PORTAL". (16886208)
• Fixes the exception when Oracle VM Manager is started and shows the error "FAILED TO START
MODEL ENGINE - JAVA.LANG.NULLPOINTEREXCEPTION". (17192350)
• Fixes the exception that occurs during the Storage Connect plug-in upgrade when Oracle VM Manager
cannot access the plug-in. (16855900)
• Fixes the issue where jobs are missing start and end times. (17192350)
• Fixes the issue to make sure a server local network does not have any ports allocated to it before
creating the network. (17173360)
• Fixes an issue that prevented Oracle VM Server from upgrading to a version not supported by Oracle
VM Manager. (16225828)
• Fixes an issue with redundant "refresh storage layers" operations in the case of multiple LUNs presented
to an access group. (16345107)
• Fixes an issue with "Object Not Found" exceptions during parallel operations which include discovery
and VM delete. (16569334)
• Fixes Null Pointer Exception in the event of a null Storage Connect plug-in. (16843328)
• Displays the correct version number for Oracle VM Manager during installation or upgrade. (16473785)
• Fixes incorrect object count for virtual machines in the Oracle VM Manager log files. (16382730)
• Prevents thread leaks when stopping multiple virtual machines sequentially or in parallel when using the
Oracle VM Manager CLI. (16357202)
• Prevents a Null Pointer Exception when removing a LUN from an Access Group. (16357417)
• Fixes a rare condition when the starting command of a virtual machine did not get executed. (16051311)
• Fixes the "Object Not Found" issue when a virtual disk file has been manually removed (or renamed).
(16226364)
53
Bug Fixes in Oracle VM 3.3.1
• Fixes a memory leak issue after exiting the Oracle VM Manager Command Line Interface when running
the exit.sh script. (16236217)
• Fixes the issue that the Oracle VM Guest Additions (VM-API) send keys and values are logged in
events. (16179187)
• Adds support in Oracle VM Manager Command Line Interface for returning the "Page83 ID" when listing
physical disks. (15950559)
• Improves the time needed to scrub the free memory during installation or boot time for Oracle's Sun
Server X2. (14829299)
• Fixes an issue where weak cipher connections are allowed for secure live migration. (16721961)
• Fixes an issue where the Oracle VM Agent allows weak cipher connections. (16721654)
• Fix which includes Xen tools (QEMU) patches to make hot-plug for vCPU work correctly. (17562626)
• Fixes an issue where the (deprecated) modprobe.conf file was still used for bonding configuration.
(16892503)
• Fixes an issue where OVMWATCH reports the wrong UUID on live migration. (16453997)
• Fixes an issue where HVM virtual machines in an OVF assembly have a limit of four virtual disks.
(16609127)
• Fixes an issue where the network interface does not come up after reboot in LACP mode. (16495256)
• Fixes an issue where PV virtual machines cannot connect to network when using 31 virtual interfaces.
(16039922)
• Fixes an issue that failover failed on bond using ixgbe driver with jumbo frames enabled. (16886409)
• Disables the bridge multicast_snooping to avoid potential packet drop from the guests. (16746299)
• Fixes an upgrade issue to return the correct UUID when discovering an Oracle VM Server with an
SMBIOS newer than version 2.6. (16221689)
• Sets a maximum of 20 vCPUs for Dom0 on large systems to provide better out-of-the-box10Gb Ethernet
performance. (15865742)
• Fixes an issue where a SPARC virtual machine may fail to access its ZFS pool after restart from Oracle
VM Manager. (16909866)
• Fixes the issue where duplicated warning message is displayed when logging into the control domain.
(16173730)
• Fixes the issue that Oracle SPARC M5 servers are not correctly identified. (16383869)
54
Bug Fixes in Oracle VM 3.2.1
• Provides the update script to perform Oracle VM Agent upgrade on SPARC. (16383971)
• Fixes the issue where during server discovery, Oracle VM attempted to discover all file server mounts
even if the server was not in the file server's admin server list. (14573204)
• Improves the handling of slave ports with differing MTU settings during bond creation. (13929346)
• Adds check for network port value, prevents a null pointer exception from being thrown. (14653155)
• Fixes the "Object Not Found" issue when hitting the Escape button in the VLAN dialog box. (15827079)
• Adds support for dynamically changing the cluster store cache size. The default cache size is now 150K.
(15850684)
• Fixes the issue where the latest update of Microsoft Internet Explorer versions 7, 8 and 9 failure to
connect to Oracle VM Manager over HTTPS . (14754924)
• Fixes the issues where closing the browser leaves open jobs in Oracle VM Manager in a bad state.
(15838028)
• Fixes the issue when discovering a virtual machine that has disks in a undiscovered repository or has
undiscovered physical disks. (14104117)
• Object not found where vdisks are left stale in certain multi-thread operations.(14043681)
• Oracle VM Manager hangs after a restart due to various tasks running jobs in the global context.
(14175298)
• Stale lock issue on multithreaded server where object not found error happens in some rare situations.
(14108096)
• Oracle VM Manager fails to discover the server or start the server after the server hardware
configuration (i.e. BIOS) was modified. (14169237)
• Oracle VM Manager UI time-out issue where the default value is not long enough for storage repository
creation. (13925232)
• List of target servers (and "other servers") is not ordered by name when migrating a virtual machine.
(14160596)
• Size of the "Edit Vlan Group" window should display all information correctly. (14160610)
• Upgrade process must not continue when the Oracle VM Manager cannot be stopped. (14305714)
• Issue in server rediscovery due to the YUM repository URL reset. (14228607)
• iSCSI initiators are no longer associated with the ZFS Storage Appliance Access Groups after a restart
of the Oracle VM Manager . (14180913)
55
Bug Fixes in Oracle VM 3.1.1
• The installer does not allow the reuse of an existing database. (13744793)
• Cannot remove server pool file system from Oracle VM Manager if the server pool file system is
corrupted. (13601257)
• Unable to create a repository on a LUN that already has partitions on it. (13596838)
• HVM guests failed to start or panic when MEM is not equal to MAXMEM. (13560881)
• Cannot remove VM and Oracle VM Server from Oracle VM Manager if the Oracle VM Server goes away.
(13473061)
• OCFS2 storage repository size is not updated in core and user interface even if repository is refreshed.
(13449381)
• Oracle VM Server boot over multipath SAN fails to initialize DM MP devices. (13341598)
• Resizing a physical disk/LUN does not resize the file system. (12962538)
• Unable to upgrade from Oracle VM Server Release 3.0.3 to Oracle VM Server Release 3.1.1 on an HP
ProLiant BL680c G5 Server. (14690247)
• IP addresses entered in Oracle VM Manager are always validated to ensure correct formatting. An error
message is displayed if the IP address is not properly formatted.
• The Linux kernel device manager (udev) has been improved to increase performance. The most
significant improvement is that the time udev takes to run after booting the server has been shortened
from 2-3 minutes to just seconds, eliminating system 'hangs' and other problems in systems which are
sensitive to start-up time.
• When the management network also fulfills the role of virtual machine network, a bridge for virtual
machine network connectivity is created on Oracle VM Servers as they are added to the environment. As
a result, virtual machines will continue to work properly when migrated to a new Oracle VM Server.
• Both Oracle VM Server and the Unbreakable Enterprise Kernel (UEK) have been patched to prevent
the flood of kernel warning messages caused by illegal configuration of certain Broadcom NetXtreme II
XGb (bnx2x) network controllers. If an illegal configuration is detected, only one warning message per
controller card is displayed.
56
Bug Fixes in Oracle VM 3.0.3
• Several network throughput issues with certain Broadcom NetXtreme II XGb (bnx2x) network controllers
on Oracle VM Server have been resolved: default TPA settings have no adverse effect on network
throughput, and network between virtual machines and NFS storage no longer hangs with bnx2x
controllers.
• When using the untagged VLAN segment, the user must configure IP address information on the NIC
port, not on the VLAN interface. This eliminates duplicate configurations and any associated risks of
misconfiguration.
• A late locking scheme has been implemented for networks on virtual machine clones: the virtual NIC
connection in the virtual machine is only locked at the end of the clone operation. As a result, locking
issues with Ethernet networks no longer occur when multiple virtual machines are cloned in parallel from
the same template.
• In Oracle VM Manager , the Acknowledge All Events button effectively clears all events, not just the
items visible in the current list view.
57
58
Chapter 5 Supported Guest Operating Systems
Table of Contents
5.1 Oracle VM Server for x86 Supported Guest Operating Systems .................................................... 59
5.2 Oracle VM Server for SPARC Supported Guest Operating Systems .............................................. 63
The guest virtual machines you create must be one of the supported configurations listed in this section.
The supported guest operating systems differ virtual machines created in x86-based server pools, and
SPARC-based server pools.
The following table lists support for virtual machines with an HVM domain type and a Linux operating
system. Refer to the notes that follow the table for additional support information.
Note
• You can create HVM guest virtual machines for Oracle Linux, Red Hat Enterprise
Linux, SUSE Linux Enterprise Server, and CentOS. However, the Xen PV drivers
59
Oracle VM Server for x86 Supported Guest Operating Systems
are included by default with the kernels. Creating PVHVM guest virtual machines
is recommended for hardware virtualization to improve performance.
• The minimum required kernel version for SUSE Linux Enterprise Server (SLES)
11 is 3.0.31-0.9.
The following table lists support for virtual machines with a PVHVM domain type and a Linux operating
system. Refer to the notes that follow the table for additional support information.
Note
• Oracle Linux, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and
CentOS 5.x include the Xen PV drivers in the kernel-xen variant of the
kernel. Oracle Linux 5.x also includes the PV drivers in kernel-uek, the
Unbreakable Enterprise Kernel (UEK). Creating PVHVM guest virtual machines is
recommended for hardware virtualization with these kernels.
• Oracle Linux, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and
CentOS 4.x require the kernel-xenU variant of the kernel to use the PV drivers
mode.
• The minimum required kernel version for SUSE Linux Enterprise Server (SLES)
11 is 3.0.31-0.9.
• To start a PVHVM guest on SLES 11, you must perform the following steps:
1. Install the operating system and upgrade to the 3.0.31-0.9 kernel version.
60
Oracle VM Server for x86 Supported Guest Operating Systems
3. In Oracle VM Manager, set the domain type for the virtual machine to Xen
PVM.
The following table lists support for virtual machines with either an HVM or a PVHVM domain type and a
Solaris operating system. Refer to the notes that follow the table for additional support information.
Note
• Oracle Solaris support begins with Solaris 10 1/13 (update 11). The Solaris 10 or
Solaris 11 OS runs as a hardware virtual machine (HVM), which requires HVM
support (Intel VT or AMD-V) on the underlying hardware platform. By default,
Solaris 10 or Solaris 11 OS has the required PV drivers installed as part of the
OS. Oracle Solaris 10 supports x86 32-bit and 64-bit architecture. 32-bit or 64-bit
mode is selected at OS boot time by examining the hypervisor and the underlying
hardware. Oracle Solaris 11 supports x86 64-bit architecture only.
For details about Oracle software certification, refer to My Oracle Support Document 464754.1, titled
Certified Software on Oracle VM at https://support.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?
id=464754.1.
61
Oracle VM Server for x86 Supported Guest Operating Systems
Note
Table 5.6 Oracle VM Paravirtual Drivers for Microsoft Windows Supported Releases
Oracle VM Oracle VM Oracle VM Oracle VM Oracle VM Oracle VM
Release Paravirtual Paravirtual Paravirtual Paravirtual Paravirtual
Drivers for Drivers for Drivers for Drivers for Drivers for
Microsoft Microsoft Microsoft Microsoft Microsoft
Windows Windows Windows Windows Windows
Release 3.0.1 Release 3.2.2 Release 3.2.3 Release 3.4.1 Release 3.4.2
Oracle VM 3.0 Yes No No No No
Oracle VM 3.1 Yes No No No No
Oracle VM 3.2 Yes Yes Yes Yes Yes
Oracle VM 3.3 No Yes Yes Yes Yes
Oracle VM 3.4 No Yes Yes Yes Yes
62
Oracle VM Server for SPARC Supported Guest Operating Systems
See Creating and Starting a Guest Domain in the Oracle VM Server for SPARC Administration Guide.
For detailed information about supported firmware and operating systems, see System Firmware Versions
and Oracle Solaris OS Versions in the Oracle VM Server for SPARC Installation Guide.
For information about specific patches and additional information about supported guest operating
systems, see the Oracle VM Server for SPARC Release Notes and Oracle VM Server for SPARC
Installation Guide.
Note
63
64
Chapter 6 Oracle VM Manager Support for Previous Oracle VM
Server releases
As of Oracle VM Release 3.4.2, Oracle VM Manager supports current and previous Oracle VM Server
releases. For example, you can use Oracle VM Manager 3.4.2 or later to manage Oracle VM Server
Release 3.4.x, 3.3.x, 3.2.10, or 3.2.11.
Important
The following table describes support between releases of Oracle VM Manager and Oracle VM Server:
Note
Oracle VM Manager Release 3.4.2 or later does not support Oracle VM Server for
SPARC releases that are running Oracle VM Agent for SPARC Release 3.2.x.
If your Oracle VM environment consists of Oracle VM Manager Release 3.4.2 or later and one or
more instances of Oracle VM Server at a different release, you should review the list of supported and
unsupported operations and features, as follows:
Supported Operations Oracle VM supports most common operations when using Oracle VM
Manager to manage an instance of Oracle VM Server that is at an
earlier release, for example, creating virtual machines (VMs), cloning
VMs, starting and stopping VMs, migrating VMs, adding a server to an
existing server pool, and so on.
Unsupported Operations and In general, if you are using Oracle VM Manager to manage an instance
Features of Oracle VM Server that is at an earlier release, you cannot use
capabilities and features that were added in a later release than a given
Oracle VM Server release. For example, Oracle VM Release 3.4.1
introduced support to export Oracle VM virtual machines. This feature is
available only if you are using both Oracle VM Manager and Oracle VM
Server Release 3.4.1 or later. This capability is not available if you are
using Oracle VM Manager Release 3.4.2 to manage Oracle VM Server
Release 3.3.4.
65
Known Issues and Caveats with Backward Compatibility
Oracle VM Server for x86 • You must ensure that you upgrade all instances of Oracle VM Server
to Release 3.2.10 or later before you upgrade to Oracle VM Manager
Release 3.4. You can upgrade to Release 3.4 only if all instances of
Oracle VM Server are at Release 3.2.10 or later.
Oracle VM Server for SPARC • All instances of Oracle VM Server for SPARC must be at 3.3.x or
later, if you are using Oracle VM Manager 3.4.2 or later to manage
previous instances of Oracle VM Server for SPARC.
66
Chapter 7 Configuration Limits for Release 3.4
Configuration limits for Oracle VM represent tested and recommended limits, and are fully supported by
Oracle.
Note
67
Table 7.2 Oracle VM Server Maximums
• 32 TB on Fujitsu M10-series
servers, SPARC M5-series
servers, or SPARC M6-series
servers.
• 8 TB on a SPARC M7-16
server.
• 4 TB on SPARC T5-series
servers.
68
Item x86 Maximum SPARC Maximum
Concurrently Running Virtual 1024 128 per physical domain (PDOM)
Machines
The maximum number of SPARC M5 or M6-series server
concurrently running virtual each have a maximum of 512
machines depends on the virtual logical domains (128 logical
machine configuration, hardware domains per physical domain *
resources, and workloads the 4 physical domains). However,
virtual machines are running. For when following Oracle best
this reason, the practical limit practices that allocate full cores
for concurrently running virtual for guests, the maximum number
machines is 300. of logical domains is 192 on
SPARC M5-series servers and
384 on SPARC M6-series servers.
Note
If you plan to change the number of maximum vCPUs for dom0, Oracle
Corporation recommends that you set the number of vCPUs for dom0 to no
greater than the number of physical CPUs per socket. Oracle Corporation also
recommends that you pin dom0 vCPUs to physical CPUs on the first socket.
If you use hyper-threading, you should count in units of threads instead of
cores. For more information see Editing Boot Parameters To Enable Hypervisor
Features in the Oracle VM Installation and Upgrade Guide.
69
Item x86 Maximum SPARC Maximum
allocate subsets of the overall
CPU, memory, and I/O resources
of a server to any given logical
domain.
Virtual RAM on 32-bit guests PVM: 64 GB N/A
HVM: 64 GB
PVHVM: 64 GB
Virtual RAM on 64-bit guests PVM: 500,000 MB Equivalent to the amount of
available RAM installed on the
Note server.
PVHVM: 8
70
Item x86 Maximum SPARC Maximum
The limit to the number of virtual Total number of virtual NICs
disks and virtual NICs is shared and virtual disks per domain for
when using the Oracle VM SPARC is no more than the total
Paravirtual Drivers for Microsoft number of available LDCs of the
Windows. Therefore, if you define supported SPARC server.
8 virtual NICs, only 32 virtual disks
can be defined for the same virtual For more information, see Using
machine. Logical Domain Channels in the
Oracle VM Server for SPARC
Administration Guide.
Virtual disks Limits provided here are imposed Depends on the total number of
by the guest kernel and not available Logical domain channels
the hypervisor. The maximums (LDC).
presented depend on the
capabilities of the guest operating Total number of virtual NICs
system. and virtual disks per domain for
SPARC is no more than the total
PVM: 104 number of available LDCs of the
supported SPARC server.
HVM: 4 IDE (including CD-ROM),
7 SCSI For more information, see Using
Logical Domain Channels in the
PVHVM: 107; or 40 if using Oracle VM Server for SPARC
Oracle VM Paravirtual Drivers for Administration Guide.
Microsoft Windows Release 3.2.3
and later.
Note
• Virtual machine maximums assume a single virtual machine using all available
resources.
71
Table 7.4 Storage Maximums
72
Chapter 8 Known Limitations and Workarounds
Table of Contents
8.1 Integration Between Oracle VM Server for SPARC and Oracle VM Manager .................................. 77
8.2 Missing Physical Disk Warning for Oracle VM Server Instance After Upgrading Oracle VM
Manager ........................................................................................................................................... 77
8.3 Suspend Error During Storage Live Migration .............................................................................. 78
8.4 Cannot Change Memory Configuration of Running PVHVM Guests Based on CentOS 6 ................. 79
8.5 PVHVM Guests Based on CentOS 5 Do Not Start Successfully After Conversion from PVM ............ 79
8.6 PVM Guests Based on CentOS 5 Do Not Start Successfully After Conversion from PVHVM ............ 79
8.7 Guests Based on CentOS 5.11 Start with the Maximum Memory Configuration .............................. 79
8.8 Guests Based on CentOS 5 Display Incorrect Number of VNICs ................................................... 79
8.9 Cannot Connect to the Oracle VM Manager Command Line Interface ........................................... 80
8.10 Live Migrating Oracle Solaris Guests to Oracle VM Server Release 3.4.4 or Later Results in
Guest Reboot ................................................................................................................................... 80
8.11 Cannot Remove Software RAID Devices from Oracle VM Manager ............................................. 82
8.12 VNICs Deleted When Editing Virtual Machine ............................................................................ 82
8.13 Enable High Availability Option is Disabled Due to Restart Option ............................................... 82
8.14 Cannot Upgrade Oracle VM Manager Due to Presence of Temporary Files .................................. 82
8.15 Job List Excel Spreadsheet Name Contains Unexpected Characters ........................................... 83
8.16 Oracle Linux 6 HVM Guest Virtual Machine with Hard Disk of 2TiB in Size Hangs on Boot ............ 83
8.17 Kernel Panic when Assigning More Than 32 virtual CPUs to Oracle Linux 32-bit PVM Guests ........ 84
8.18 Live Migration of Guest Virtual Machine Fails Due to Linux Kernel Version ................................... 84
8.19 PVHVM Guest Boot Delayed by Xen Balloon Driver ................................................................... 85
8.20 Oracle VM Server Cannot Boot from Software RAID Devices with Disks that are 2TB or Larger ..... 85
8.21 Oracle VM Server Does Not Boot After Installation to LUN Targets Larger Than 2TB .................... 85
8.22 Oracle VM Server Boot Delay and I/O Error Messages with Oracle ZFS Storage Array ................. 86
8.23 FIPS Integrity Error Message for SSH Connections from Oracle VM Server ................................. 86
8.24 Incorrect MAC Address Displayed for Bond Port ........................................................................ 87
8.25 Kernel Panic when Booting Guest Virtual Machine with 100 or more Virtual Disks ........................ 87
8.26 Different Default Values for the serverAffinityType when Creating Anti-Affinity Groups ................... 87
8.27 Performance Impact when Less than 8 CPUs Configured for dom0 ............................................. 87
8.28 Upgrading Oracle VM Server from Release 3.2.10 to 3.3.4 and then to 3.4.2 fails ......................... 88
8.29 Logical Volume Manager (LVM) is enabled on Oracle VM Server Release 3.4.1 ........................... 88
8.30 Btrfs Root File System Not Supported on PVM Guest Virtual Machines ....................................... 89
8.31 SUSE Linux Enterprise Server 12 SP2 and Later Not Supported For PVM Guest Virtual
Machines .......................................................................................................................................... 89
8.32 Cannot Connect to the Oracle VM Manager Web Interface with Microsoft Internet Explorer ........... 89
8.33 The Virtual Machine Console Window in the Oracle VM Manager Web Interface Opens in the
Background when using Microsoft Internet Explorer ........................................................................... 89
8.34 Inconsistent Value for SPARC Domain Type .............................................................................. 90
8.35 Integer Only Values for the statValue Option ............................................................................. 90
8.36 Aborting a Server Discovery Operation Results in Server Listed with an Unknown Operational
State ................................................................................................................................................ 90
8.37 Automatic Discovery Operations can Conflict with Server Configuration Operations ...................... 91
8.38 Solaris 11 x86 Virtual Machine Disk Type Can Cause Kernel Panic on Boot ................................. 91
8.39 Solaris 10 x86 Virtual Machine Installation Fails To Boot ............................................................ 91
8.40 Oracle Linux 7 Virtual Machines Imported from a VirtualBox Virtual Appliance Do Not Start on
Oracle VM ........................................................................................................................................ 92
8.41 (x86 Only) IOStat Stays at 100% Util for Oracle Linux Virtual Machines After a Storage Migration .. 92
8.42 Serial Console Does Not Respond for Oracle Linux 7 HVM Virtual Machines ............................... 93
73
8.43 Error When Attaching CD-ROM Drives to Running HVM Virtual Machines ................................... 93
8.44 Deleting Bond Ports for VLANIF Interfaces Deletes the VLANIF .................................................. 93
8.45 (SPARC Only) NFSv4 Delegation Interferes with Cluster Heartbeat, Using NFSv3 Results in
RPC Error PROGRAM/VERSION MISMATCH ................................................................................... 94
8.46 Cannot Import OVF Files into Oracle VirtualBox ......................................................................... 94
8.47 Oracle VM Manager Cannot Receive Messages from SPARC Virtual Machines ........................... 94
8.48 Cannot Boot Oracle VM Server Installed on an HP DL380 Gen9 Server in UEFI mode .................. 94
8.49 (x86 Only) Cannot Boot Oracle VM Server with Broadcom 57840S CNA Card After PXE Install ..... 95
8.50 Changing to Dynamic Mode IP Address Assignment Does Not Rollback if the Server is Unable
to Obtain an IP Address ................................................................................................................... 95
8.51 Drag and Drop from Blank Space of Object ............................................................................... 95
8.52 Error When Using the Administrator Tool in Parallel ................................................................... 95
8.53 Oracle VM Manager Command Line Interface TCP Port Conflicts With Port Reserved for NDMP ... 96
8.54 When A Virtual Machine Using A Shared Virtual Disk Is Moved To Another Repository, The
Shared Virtual Disk Is Cloned ........................................................................................................... 96
8.55 Unable to Remove a Storage Array if a File System Exists on a LUN .......................................... 96
8.56 Cluster Failure After An Offline Server is Removed From the Cluster While Another Cluster
Member is Offline ............................................................................................................................. 96
8.57 LSI Logic / Symbios Logic MegaRAID SAS 1078 is not supported on Oracle VM Server ................ 97
8.58 (SPARC Only) Hot-added CD-ROM Device is Detected As Hard Disk ......................................... 98
8.59 Fibre Channel LUNs Missing From Oracle VM Manager After Refresh ......................................... 98
8.60 (SPARC Only) Size of Physical Disk in Oracle VM Manager Incorrect When LUN Size is
Decreased on Storage Array ............................................................................................................. 99
8.61 The Apparent Size of a Repository in Oracle VM Manager Web Interface Does Not Update
Automatically .................................................................................................................................... 99
8.62 Virtual Disks Do Not Display on Solaris 10 Guests ..................................................................... 99
8.63 Oracle Linux 5 Virtual Machines Converted from Physical Hosts Do Not Boot ............................. 100
8.64 SSL Exception in AdminServer Log File ................................................................................... 100
8.65 Oracle VM Servers in a Server Pool Must Be at the Same Minor Version ................................... 100
8.66 Oracle VM Manager Displays Incorrect Details for ZFS Storage Appliances After Cluster
Failover .......................................................................................................................................... 101
8.67 Oracle VM Server Upgrade Not Possible with NetApp Storage plug-in ....................................... 101
8.68 Oracle VM Manager Web Interface Incorrectly Displays Oracle VM Server Upgrade Required ..... 101
8.69 The Oracle VM Manager Silent Install Option Using A YAML Configuration File Is Deprecated ..... 101
8.70 Aborting An Oracle VM Server Upgrade Initiated By The UpgradeServers.py Script May Result
In Inconsistent Reporting on Upgrade Status ................................................................................... 102
8.71 Kdump On Oracle VM Server Only Supports Dump Levels 0 and 1 ........................................... 102
8.72 Network Receive Statistics For A Virtual Machine Are Invalid And Set To -1 ............................... 102
8.73 CPU Affinity After Live Migration of Virtual Machine on Non-Uniform Memory Access (NUMA)
Systems ......................................................................................................................................... 103
8.74 Virtual Machines Based on Oracle Solaris 11 Do Not Boot ........................................................ 103
8.75 Changing Domain Type from Xen HVM to Xen HVM PV Drivers Causes Informational Messages
in AdminServer.log ......................................................................................................................... 103
8.76 Single-Stream TCP Throughput is Degraded for Guest Virtual Machines Running UEK Release
4 .................................................................................................................................................... 103
8.77 Error Partitioning Caused by Disk Label or Format in UEFI Mode .............................................. 104
8.78 Kernel Panic when Booting Guest Virtual Machine with Oracle Solaris 11.2 ................................ 104
8.79 Oracle VM Manager Web Interface Goes to Blank Screen with Mozilla Firefox on a Linux
System ........................................................................................................................................... 104
8.80 HugePages Deprecated for PVM Guests as of Oracle VM Release 3.4.1 ................................... 105
8.81 HugePages Does Not Display as Selected in Oracle VM Manager Web Interface ....................... 105
8.82 Kdump Service Hangs at Discovery of FCoE Device with Broadcom CNA on HP Servers ............ 105
8.83 Kdump Service with UEK Release 4 Fails to Create Memory Dump on Cisco UCS B230 M2
Blade Server .................................................................................................................................. 105
74
8.84 Do Not Discover Oracle VM Servers Earlier than Release 3.2.10 .............................................. 106
8.85 (SPARC Only) Cannot Export Virtual Appliance with Physical Disk Access ................................. 106
8.86 (SPARC Only) MTU Resets to the Default of 1500 After Server Power Off ................................. 106
8.87 Oracle VM Server Installer Fails When Modifying Swap Partitions ............................................. 107
8.88 Kernel Startup is Slow after Upgrading to UEK4 on PVHVM Guests .......................................... 107
8.89 Cannot Enable High Availability (HA) for Virtual Machines with HugePages ................................ 107
8.90 Kdump is Not Supported on FCoE SANs ................................................................................. 107
8.91 Virtual Machines Hang at Boot if Grant Reference Request Too Large ....................................... 108
8.92 Cannot Edit Running Virtual Machines with HugePages and HA Enabled ................................... 108
8.93 Import URL Cannot Exceed Maximum Character Length .......................................................... 108
8.94 Performance Impact for Less than 8 CPUs Configured for dom0 ............................................... 109
8.95 Migration of PVHVM Guest Virtual Machines may be Affected by Linux Kernel Version ............... 109
8.96 SR-IOV Is Not a Supported Feature ........................................................................................ 109
8.97 Oracle VM Manager Upgrade Does Not Restore External Authentication Provider ...................... 109
8.98 Limit of 3 Virtual Machine Console Windows with Microsoft Internet Explorer .............................. 110
8.99 Virtual Machine Migration Job Loop During Oracle VM Upgrade ................................................ 110
8.100 Kdump Service on Oracle Sun Server X4-4 with QLogic QLE2562 HBA ................................... 111
8.101 The kdump Service Cannot Mount the Root Partition if Zone Connection to EMC Storage Array . 112
8.102 Oracle VM Server Hangs During Upgrade if Boot Partition Not Large Enough ........................... 112
8.103 GRO Must Be Disabled After an Upgrade When Routing/Bridging with IXGBE Driver ................ 112
8.104 Change in Variable Name for the eventGetTypes SOAP Call using Oracle VM Web Services
API ................................................................................................................................................. 112
8.105 Restart Virtual Machines After Upgrade ................................................................................. 113
8.106 LRO Setting Bridge Interface ................................................................................................. 113
8.107 Disable Transitional Update Repository .................................................................................. 113
8.108 (X86 Only) SWIOTLB Buffer Errors When Using Jumbo Frames on Oracle VM Server .............. 113
8.109 Operation Transactions ......................................................................................................... 113
8.110 One Instance of Oracle VM Manager Web Interface Per Browser Session ................................ 114
8.111 IPv6 Updates On Some Microsoft Windows Guests Do Not Reflect in Oracle VM Manager ........ 114
8.112 Incorrect Text Color After Acknowledging VM Errors ............................................................... 114
8.113 Unable to Copy Text or Take Screen Shots of Error Dialogs ................................................... 114
8.114 Safari Web Browser on Windows is not Supported ................................................................. 115
8.115 Object Lock Prevents Some Operations ................................................................................. 115
8.116 Unable to Configure NTP For All Servers ............................................................................... 115
8.117 (x86 Only) Oracle VM Server Installer Goes To Black Screen After Running /sbin/loader ..... 115
8.118 (x86 Only) Oracle VM Server Installer Hangs Waiting for Hardware to Initialize ......................... 116
8.119 (x86 Only) Oracle VM Server Installer Hangs Examining Storage Devices For Large Number of
LUNS ............................................................................................................................................. 116
8.120 (x86 Only) Benign Error Message During Install: HDIO_GET_IDENTITY failed ......................... 116
8.121 (x86 Only) Cannot Use Installation Media to Upgrade Oracle VM Server if Earlier than Release
3.3.x .............................................................................................................................................. 116
8.122 (x86 Only) Oracle VM Server Upgrade From ULN or Oracle Public Yum Repositories is
Restricted to Servers That Do Not Use Non-Native Packages .......................................................... 117
8.123 (x86 Only) Many ISCSI or Fibre Channel LUNs Require More Server Memory .......................... 117
8.124 Clustered Server Pools in Mixed Platform Environments Require NFS Access Groups To Be
Configured ...................................................................................................................................... 117
8.125 (SPARC Only) Cluster Recovery May Fail When Using NFSv3 For Server Pool File System ...... 118
8.126 (x86 Only) Server BIOS Settings ........................................................................................... 118
8.127 (x86 Only) Oracle VM Server Does Not Support crashkernel=auto Boot Parameter ................... 118
8.128 Kdump Core Collector Using Sparse Copy Fails ..................................................................... 119
8.129 (x86 Only) Oracle VM Server Installation on Sun Fire X4800 ................................................... 119
8.130 (x86 Only) Installation of Oracle VM Server on some HP Server Hardware May Fail if Tape
Drive is Attached ............................................................................................................................ 119
8.131 (x86 Only) Wake On Lan (WOL) Fails if Oracle VM Servers on Different Subnets ..................... 119
75
8.132 (x86 Only) Sun Fire X4170 Server Not Fenced During Cluster Failure ...................................... 120
8.133 (x86 Only) Netconsole Unknown Error 524 During Oracle VM Server Start-up .......................... 120
8.134 (x86 Only) ACPI Buffer Error After Installing Oracle VM Server ................................................ 120
8.135 Failed Server Evacuation Defined in DPM Policy Generates User Acknowledgeable Event ........ 120
8.136 (SPARC Only) Serial Console Hangs During Installation of Oracle Solaris 11 on Virtual
Machine ......................................................................................................................................... 121
8.137 Editing Virtual Machine Configuration File Results in Unexpected Behavior .............................. 121
8.138 Concurrent Template Operations May Fail Due to Lock Issue .................................................. 121
8.139 (SPARC Only) Wrong Error Message Returned When Importing A Template From An Incorrect
URL ............................................................................................................................................... 122
8.140 (x86 Only) Virtual Machine Fails to Restart On Another Server in the Cluster if ACPI is Enabled . 122
8.141 (x86 Only) Oracle Solaris 10 Virtual Machine May Hang During Shutdown ............................... 122
8.142 (x86 Only) Virtual Machine Created with Network (PXE) Installation Does Proceed Beyond Pre
Boot ............................................................................................................................................... 122
8.143 (x86 Only) Maximum Memory to Start a PVM Guest is 470 GB ............................................... 123
8.144 (x86 Only) Creating a PVM Guest Slow Using Local Storage .................................................. 123
8.145 (x86 Only) Live Migration of a VM may be Affected by Guest Linux Kernel Version ................... 123
8.146 (x86 Only) Improving Mouse Pointer Control in Virtual Machine Console .................................. 123
8.147 (x86 Only) Solaris 10 Kernel Panic on Some AMD Systems .................................................... 123
8.148 (x86 Only) Solaris 10 Release 8/11 Guest Hangs at Boot ....................................................... 124
8.149 (x86 Only) Solaris 11 Guest With More Than 2 VCPUs Hangs at Boot ..................................... 124
8.150 (x86 Only) Solaris 11 Release 2011.11 Guest Hangs at Boot .................................................. 125
8.151 (x86 Only) Windows Server 2008 R2 x64 HVM Guests do Not Cleanly Shut Down .................... 125
8.152 (SPARC Only) Need Actual Available Memory for Live Migration ............................................. 126
8.153 (x86 Only) Network Card Limit in Virtual Machines ................................................................. 126
8.154 QLogic cLOM8214 1/10 Gigabit Ethernet NIC Initializes with Link State Down .......................... 126
8.155 Renaming of QLogic cLOM8214 1/10 Gigabit Ethernet NIC is Incorrect .................................... 126
8.156 (x86 Only) Incorrect ARP Reply When Using Jumbo Frames ................................................... 127
8.157 (x86 Only) Changing Cluster Heartbeat Network Does Not Reflect New IP Address .................. 127
8.158 NFSv4 Read/Write Delegation Not Supported ........................................................................ 128
8.159 (x86 Only) Unclean File System Causes Errors When Used as a Server Pool File System ......... 128
8.160 (SPARC Only) Agent Fails to Reconcile Multipath LUNS If Solaris I/O Multipathing is Disabled ... 128
8.161 (x86 Only) Size of New LUN on Server is Incorrect If an Existing LUN Is Unmapped First .......... 129
8.162 (x86 Only) Remapping LUNs Causes Storage Refresh To Hang .............................................. 129
8.163 (x86 Only) LUNs Must Be Cleaned Prior to Storage Repository Creation .................................. 129
8.164 NetApp ONTAP (8.2 c-mode) Operating System Does Not Work With Oracle VM ..................... 130
8.165 (x86 Only) Black Listing of System Disks for Legacy LSI MegaRAID Controllers Not Supported .. 130
8.166 (x86 Only) Blacklisting of System Disks for Multipathing Fails on HP Smart Array (CCISS) Disk
Devices .......................................................................................................................................... 130
8.167 (x86 Only) HP Smart Array CCISS Disk Devices Are Not Supported For Creation of Local
Storage Repositories ...................................................................................................................... 131
8.168 (x86 Only) Multiple Paths Used in Multipath Environments on Oracle Pillar Axiom Storage ......... 131
8.169 Refreshing a NAS-based File System Produces Invalid/Overlapping Exports ............................ 131
8.170 (x86 Only) Shared OCFS2 Cluster File System on Virtual Disk Not Supported .......................... 132
8.171 Virtual Disk Images Must Be Properly Aligned To The OCFS2 Block Size For Performance ....... 132
8.172 Oracle VM Manager Command Line Interface Backspace Key ................................................ 132
8.173 Oracle VM Manager Command Line Interface Allows THIN_CLONE cloneType On NFS ........... 133
8.174 Untagged VLAN Interface Missing After Upgrade of Oracle VM Manager ................................. 133
Find information on known limitations and workaround procedures for Oracle VM.
• If an issue applies to Oracle VM Server for x86 only, the title includes x86 Only.
76
Integration Between Oracle VM Server for SPARC and Oracle VM Manager
• If an issue applies to Oracle VM Server for SPARC only, the title includes SPARC Only.
• If an issue applies to both Oracle VM Server and Oracle VM Server for SPARC, the title does not include
any platform designation.
There are currently several features in Oracle VM Server for SPARC that cannot be represented in Oracle
VM Manager. These features include the following:
• Physical I/O domains such as SR-IOV, direct I/O, and root domains.
• Certain network options such as Private VLAN (PVLAN), "vNICs on VNets" or multiple MAC addresses
per virtual network device, and Quality of Service (QoS) configurations.
• Crypto accelerators assigned to guest domains. This is a feature on SPARC servers prior to the T4
series that required some administrative effort. With the T4 series and later, crypto accelerators are
always available without any administrative effort required.
• Whole-core and max-cores constraints, although these can be configured by editing the configuration file
named /etc/ovs-agent/agent.ini that is used by the Oracle VM Agent for SPARC on each Oracle
VM Server.
• Multiple service domains, also known as 'shadow service domains', which are typically used to provide
redundancy. Initial support for these has been implemented in the Oracle VM Agent for SPARC.
There are a number of limitations that exist in Oracle VM Manager for server pools that contain Oracle VM
Server for SPARC servers. These limitations include the following:
• ISCSI or Fibre Channel storage cannot be used to store a repository or a server pool cluster file system.
However, these disks can be used for direct virtual machine assignment. NFS storage should be used
if you need to set up a server pool cluster file system. Either NFS, ZFS or a local disk may be used to
configure a repository.
• Huge page support on SPARC systems is not controlled by Oracle VM. All the page sizes available on
the underlying hardware are always available to the guest virtual machine.
• Virtual machine suspend and resume functionality is not available for virtual machines running in a
SPARC-based server pool.
• Support for a secondary service domain, running alongside the primary service domain, has been added
to the Oracle VM Agent. This feature allows you to restart the primary service domain without causing
any interruption to network or disk I/O for any of your running virtual machines.
77
Suspend Error During Storage Live Migration
Workaround: Upgrade all instances of Oracle VM Server to the same release version of Oracle VM
Manager.
Bug 26320569
The suspend operation requires more time to complete due to the additional disk activity, resulting in a
suspend error that causes the storage live migration to fail. A suspend error similar to the following is
displayed in the /var/log/xen/xend.log on the source Oracle VM Server instance:
[timestamp 2792] DEBUG (XendDomainInfo:3509) waitForSuspend: domain 1 state:
[timestamp 2792] INFO (XendCheckpoint:430) [9836] xc: error:
Suspend request failed: Internal error
[timestamp 2792] DEBUG (XendDomainInfo:1943) XendDomainInfo.handleShutdownWatch
[timestamp 2792] INFO (XendCheckpoint:430) [9836] xc: error: Domain appears not
to have suspended: Internal error
A timeout error is also displayed in the kernel log on the source Oracle VM Server guest virtual machine:
timestamp server kernel: [ 1601.227167] Freezing of tasks failed
after xx seconds (0 tasks refusing to freeze, wq_busy=1):
Note
The value you set for the pm_freeze_timeout parameter impacts the amount
of time the source Oracle VM Server guest virtual machine remains offline
during storage live migration.
3. Perform the live migration with storage again and no suspend errors should occur.
If a suspend error still occurs for the source Oracle VM Server guest virtual machine after the
pm_freeze_timeout parameter is updated, you may need to avoid storage live migration until the
additional disk activity completes, or reconsider the maximum time you can afford for the guest virtual
machine to remain offline during storage live migration.
78
Cannot Change Memory Configuration of Running PVHVM Guests Based on CentOS 6
Bug 26514957
Workaround: Stop the virtual machine and then change the memory configuration.
Bug 26542210
Bug 26537271
Bug 26537152
8.7 Guests Based on CentOS 5.11 Start with the Maximum Memory
Configuration
Virtual machines based on CentOS 5.11 start running with a total memory that is equal to the maximum
memory instead of the available memory, as defined in the virtual machine configuration.
Bug 26536834
79
Cannot Connect to the Oracle VM Manager Command Line Interface
The duplicate VNIC is caused by an issue with the CentOS 5 kernel that loads two drivers for the same
network interface.
Bug 26535868
Note
This issue may also impact earlier OpenSSH Release 7.x versions that are
available on other operating systems.
Workaround: If you are using openssh-7.4p1 or later, you can connect to the Oracle VM Manager
Command Line Interface by issuing the following command on your SSH client or command line interface:
$ ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oHostKeyAlgorithms=+ssh-dss -l \
manager_username manager_ip -p 10000
For more information on further possible solutions to this issue, see Oracle VM 3.4: Connecting to Oracle
VM Manager CLI results in "Connection to <host> closed by remote host" Document ID 2298328.1, on My
Oracle Support at: https://support.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=2298328.1.
Bug 24742496
80
Live Migrating Oracle Solaris Guests to Oracle VM Server Release 3.4.4 or Later Results in Guest Reboot
1. Using the Oracle VM Manager Web Interface, edit the destination Oracle VM Server and place it into
maintenance mode. For more information, see Edit Server.
Note
If you have just upgraded to Oracle VM Server Release 3.4.4 or later, the Oracle
VM Server may already be in maintenance mode.
• BIOS-based systems:
grub2-mkconfig -o /boot/grub2/grub.cfg
• UEFI-based systems:
grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
5. Reboot the Oracle VM Server instance for the update to take effect.
6. Edit the Oracle VM Server on the Oracle VM Manager Web Interface and take it out of maintenance
mode by unchecking the Maintenance Mode check box.
7. Proceed to live migrate the Oracle Solaris guest to the destination Oracle VM Server instance.
1. Before migrating the Oracle Solaris guest to the destination Oracle VM Server, you must stop the virtual
machine guest on the source server.
3. Once migration completes, restart the Oracle Solaris guest on the destination Oracle VM Server.
81
Cannot Remove Software RAID Devices from Oracle VM Manager
Bug 26594820
Workaround: Manually remove the software RAID devices from Oracle VM Server. For more information,
see Removing Software RAID Devices in the Oracle VM Administration Guide.
Bug 25554732
Workaround: When editing a virtual machine, you must wait until all previous edit jobs complete before
making any further modifications.
Bug 24961613
Workaround: To enable the Enable High Availability option, you must first edit the virtual machine
configuration and set the Restart Action on Crash option to Restart or Restart After Dump and then
save the configuration before you attempt to enable high availability.
Bug 24961613
Workaround: Delete any temporary files that cause the upgrade failure. For example, run the following
command as the root user on the Oracle VM Manager host:
# rm -Rf /tmp/workdir_sel
# rm -Rf /tmp/ovm*
82
Job List Excel Spreadsheet Name Contains Unexpected Characters
Once these files are removed, restart the upgrade procedure again.
Bug 25394965
Workaround: Although the Excel spreadsheet can be successfully downloaded and opened, it is
recommended to remove the unexpected characters and rename the spreadsheet to JobList.xls.
Bug 25574313
8.16 Oracle Linux 6 HVM Guest Virtual Machine with Hard Disk of
2TiB in Size Hangs on Boot
You cannot start hardware virtualized (HVM) guests running Oracle Linux 6 if the guest boots from hard
disks of 2TiB in size.
Workaround:
1. Host the contents of the Oracle VM Server ISO image file over the network so that you can access the
required GRUB2 package files.
3. Clone the Oracle Linux 6 virtual machine and ensure that it is not attached to a hard disk of 2TiB in
size.
5. Install the grub2-ovs packages on the 2TiB hard disk that you attached to the cloned virtual machine,
for example:
# cd /tmp
# wget --no-proxy /path/grub2-ovs-version.rpm
# wget --no-proxy /path/grub2-ovs-tools-version.rpm
# mkdir tmp
# cd tmp
# rpm2cpio ../grub2-ovs-version.rpm | cpio -iumd
# rpm2cpio ../grub2-ovs-tools-version.rpm | cpio -iumd
# /usr/sbin/grub2-install -d ./usr/lib/grub/i386-pc/ --force /dev/sdb
Installing for i386-pc platform.
./usr/sbin/grub2-install: warning: this GPT partition label contains no BIOS Boot
Partition; embedding won't be possible.
./usr/sbin/grub2-install: warning: Embedding is not possible. GRUB can only be
installed in this setup by using blocklists. However, blocklists are UNRELIABLE and
their use is discouraged.
Installation finished. No error reported.
Note
• Substitute path with the path to the contents of the Oracle VM Server ISO
image file on your file system.
83
Kernel Panic when Assigning More Than 32 virtual CPUs to Oracle Linux 32-bit PVM Guests
• Substitute /dev/sdb with the device name for the 2TiB hard disk that you
attached to the cloned virtual machine.
Note
7. Re-attach the 2TiB hard disk to the virtual machine that you could not boot.
Bug 25655807
Workaround: Set the maximum virtual CPUs to 32 or less. Use the uname command to determine the
UEK version you are running on the guest virtual machine and from the result, you can determine the
maximum number of virtual CPUs supported, for example:
# uname -r
2.6.39-400.278.3.el6uek.i686
# cat config-2.6.39-400.278.3.el6uek.i686 | grep CONFIG_NR_CPUS
CONFIG_NR_CPUS=32
Bug 25745578
Bug 25644455
84
PVHVM Guest Boot Delayed by Xen Balloon Driver
This issue occurs when the virtual machine configuration includes a maximum memory value that is
much larger than the available memory value. This configuration causes the Xen balloon driver to shrink
the guest memory to the target size. As a result, the boot time for the virtual machine takes longer than
expected.
Workaround: The greater the difference between the values for maximum memory and available memory,
the longer it takes to boot PVHVM guests. If you encounter this issue, you should either decrease the
maximum memory or increase the available memory in the virtual machine configuration.
Bug 25709221
Bug 25608136
As of Release 3.4.3, support for installation of Oracle VM Server to systems where Fibre Channel or FCoE
LUNs are greater than 2TB in size applies to the following tested versions only:
85
Oracle VM Server Boot Delay and I/O Error Messages with Oracle ZFS Storage Array
Note
• Legacy BIOS SAN boot is not supported for Fibre Channel or FCoE LUNs that
are greater than 2TB in size for QLogic HBA or other host controllers on the
target server.
• UEFI SAN boot for Qlogic HBA or other host controllers are supported, but the
firmware for the HBA or other host controllers on the target server may need to
be updated.
• Both Legacy BIOS and UEFI SAN boot for HBA or other host controllers, such as
Emulex are supported, but the firmware for the HBA or other host controllers on
the target server may need to be updated.
Workaround: Update the firmware for the host bus adapter (HBA) or other host controller on the target
server.
Bug 25701247
8.22 Oracle VM Server Boot Delay and I/O Error Messages with
Oracle ZFS Storage Array
A known issue with the Oracle ZFS SCSI storage driver causes significant delays during Oracle VM Server
boot and writes a large number of I/O error messages to the kernel log. This issue occurs because the
storage driver loads before the SCSI device handler modules (scsi_dh) are available. As a result, the
system issues I/O operations to SCSI multipath devices before the devices can handle them.
Workaround: Add the SCSI device handler modules (scsi_dh) to the kernel command line parameters
as follows:
• BIOS-based systems:
grub2-mkconfig -o /boot/grub2/grub.cfg
• UEFI-based systems:
grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
Bug 25686610
8.23 FIPS Integrity Error Message for SSH Connections from Oracle
VM Server
If you are logged in to Oracle VM Server and you establish an SSH connection to another system, the
following message is displayed:
FIPS integrity verification test failed.
This message indicates that Oracle VM Server cannot enable FIPS mode for outbound SSH connections.
However, Oracle VM Server can still establish an SSH connection to the remote system but that
connection is not validated by FIPS cryptographic algorithms.
86
Incorrect MAC Address Displayed for Bond Port
Bug 25831585
Workaround: Ensure the bond port is up by running the dladm show-aggr -x command on the primary
domain of the SPARC server, and then rediscover the instance of Oracle VM Server for SPARC.
Bug 25768560
8.25 Kernel Panic when Booting Guest Virtual Machine with 100 or
more Virtual Disks
Adding 100 or more virtual disks to a guest virtual machine and then booting the virtual machine with a
UEK2, UEK3, or UEK4 kernel results in a kernel panic, as the virtual machine does not recognize all the
virtual disks and loses network connectivity.
Workaround: For more information on this issue and the workaround, see Oracle VM: VM Guest With
100+ Virtual Disks Does Not Recognize Them All And Loses Connectivity Document ID 2038050.1, on My
Oracle Support at: https://support.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=2038050.1.
Bug 24428913
Bug 23542910
Workaround:
87
Upgrading Oracle VM Server from Release 3.2.10 to 3.3.4 and then to 3.4.2 fails
3. Set the value of the xen_netback max_queues option equal to the number of CPUs configured for
dom0.
Bug 24329130
Workaround: After upgrading to Oracle VM Server Release 3.3.4, remove the kernel-uek-
firmware-2.6.39-400.249.3.el5uek.noarch rpm package before upgrading to Release 3.4.2. For
example, run the following command to delete the rpm package:
# rpm -e --justdb kernel-uek-firmware-2.6.39-400.249.3.el5uek.noarch
Bug 24665394
Workaround: Disable LVM on Oracle VM Server. If you plan to upgrade to a later version, you should
complete these steps before upgrading:
3. Locate the global { section of the file and comment out the global_filter = [ "r/.*/" ]
setting option, so it is displayed as follows:
# For OVS, don't even open any device
# global_filter = [ "r/.*/" ]
4. Locate the devices { section of the file. Uncomment the global_filter = [] setting and update
it as follows:
# Since "filter" is often overridden from command line, it is not suitable
# for system-wide device filtering (udev rules, lvmetad). To hide devices
# from LVM-specific udev processing and/or from lvmetad, you need to set
# global_filter. The syntax is the same as for normal "filter"
# above. Devices that fail the global_filter are not even opened by LVM.
global_filter = [ "r/.*/" ]
88
Btrfs Root File System Not Supported on PVM Guest Virtual Machines
6. If LVM disks are activated, you must manually deactivate them or reboot Oracle VM Server for the
updates to take effect.
Bug 24583291
8.30 Btrfs Root File System Not Supported on PVM Guest Virtual
Machines
Btrfs root file system is not supported on x86-based PVM guest virtual machines. For example, updating
the domain type of PVHVM guests running on SUSE Linux Enterprise Server 12 SP2 or later to PVM
results in the virtual machine failing to start-up. This occurs as btrfs is the default file system on SUSE
Linux Enterprise Server 12 SP2 or later operating system.
Bug 25040512
8.31 SUSE Linux Enterprise Server 12 SP2 and Later Not Supported
For PVM Guest Virtual Machines
Although SUSE Linux Enterprise Server 12 SP2 or later is supported for both hardware virtualization
(HVM) and hardware virtualization with paravirtual drivers (PVHVM), it is not possible to run this operating
system as a paravirtualized domain (PVM). This is due to the default btrfs file system on SUSE Linux
Enterprise Server 12 SP2 or later not being supported on PVM.
Bug 25040512
• Use Internet Explorer version 11 or a different browser, such as Mozilla Firefox, to connect to the Oracle
VM Manager Web Interface.
Bug 20691432
89
Inconsistent Value for SPARC Domain Type
Microsoft Internet Explorer. This means that after you click on the menu option to open a console dialog,
it initially appears as if nothing has happened as the main browser window remains in the foreground.
However, the console window has opened but is in the background. This is the result of a bug in the
underlying framework that is used for the development of the Oracle VM Manager Web Interface.
• Check in the Windows task bar to determine whether another window has been opened in the
background, or use the Alt-Tab key combination to cycle through open windows.
• Use a different browser, such as Mozilla Firefox or Chrome to connect to the Oracle VM Manager Web
Interface.
Bug 21235816
You are unable to use these values interchangeably and must use the correct value for the interface that
you are using to configure the virtual machine. Check the appropriate documentation if you are unsure of
the values that can be set for this option.
Bug 20786024
Bug 21046910
Workaround: To correct the operational state returned by Oracle VM Manager, rediscover any Oracle VM
Servers that are affected. If you wish to remove these servers, delete them after you have performed the
discovery operation.
90
Automatic Discovery Operations can Conflict with Server Configuration Operations
Workaround: To correct the information returned by Oracle VM Manager, rediscover any Oracle VM
Servers that are affected.
Bug 21341236
8.38 Solaris 11 x86 Virtual Machine Disk Type Can Cause Kernel
Panic on Boot
On Oracle VM, Solaris 11 x86 virtual machines are all installed and run with Xen Virtual Disk (XVD) disks
by default. Exporting a Solaris 11 x86 virtual machine as a virtual appliance (OVA), and then importing
it to a virtualization platform that supports a different disk type or disk controller, changes the path to the
boot disk for the virtual machine. As a result, a kernel panic occurs for the Solaris 11 x86 virtual machine
because it cannot locate the boot disk.
Workaround: Use the Solaris 11 x86 live installation ISO to boot the Solaris virtual machine. When the live
installation GUI displays, open a terminal window and change to the root user. Run zpool import -f
rpool and then run shutdown. After the virtual machine shuts down, remove the live installation ISO and
boot from the disk.
Bug 21253581
This bug is related to the way in which virtual disks are referenced in the virtual machine configuration file,
where they are configured as Xen Virtual Disk (XVD) disks by default. For Solaris to recognize this disk
type, a patch needs to be applied to the Solaris installer to recognize the new disk type and to allow it to
write to the boot block of the disk. This patch can been applied for network installs, but is not applied to the
installation ISO, therefore additional steps must be taken when performing an installation from the ISO.
Workaround: The workaround provided here has been tested for Solaris 10u11. If you require that you
complete an installation of Solaris 10u11 from ISO, it is possible to rectify the issue described here by
performing the following steps:
• Reboot the virtual machine and use the ISO to perform the boot.
• During the boot process select the option to go to command line mode (option 6).
• At the command prompt, run installgrub to manually install the grub loader to the boot partition, as
follows:
/a/sbin/installgrub -m /a/boot/grub/stage1 /a/boot/grub/stage2 /dev/rdsk/c1t0d0s0
91
Oracle Linux 7 Virtual Machines Imported from a VirtualBox Virtual Appliance Do Not Start on Oracle VM
Bug 21775043
Workaround: There are two workarounds to this problem. The first involves adding the missing drivers
prior to exporting the Oracle Linux 7 virtual machine from Oracle VirtualBox. To do this, run the following
command as root before you perform the export:
# dracut --add-drivers "xen-blkfront xen-netfront" --force
If you are unable to perform this step prior to the export, you can temporarily boot the virtual machine as an
HVM and add the following boot option in GRUB prior to boot:
xen_emul_unplug=never
Once the virtual machine has booted, you can add the missing drivers by running the following command
as root:
# dracut --add-drivers "xen-blkfront xen-netfront" --force
Reboot the virtual machine once the drivers have been added to the initramfs.
Bug 21244825
8.41 (x86 Only) IOStat Stays at 100% Util for Oracle Linux Virtual
Machines After a Storage Migration
When a virtual machine running a kernel prior to UEK 3.8.13-68.2.1 is migrated from a local repository
using the 'live migrate with storage' option, and all IO has been terminated, the IOStat on the virtual
machine remains stuck at 100% Util.
This is related to a kernel bug where a call to the Xen blkfront driver caused the IO statistics to not be
properly refreshed after a migration was completed, causing the accounting to fall out of sync with actual
IO activity.
Workaround: This bug is resolved in UEK 3.8.13-68.2.1 and greater. To avoid this issue, upgrade the
kernel used by your virtual machine.
92
Serial Console Does Not Respond for Oracle Linux 7 HVM Virtual Machines
Bug 21614184
8.42 Serial Console Does Not Respond for Oracle Linux 7 HVM
Virtual Machines
The serial console does not respond, or provide any output, for virtual machines based on Oracle Linux 7
that are of domain type HVM or PVHVM.
Workaround: Configure the GRUB bootloader for the virtual machine as follows:
Note that the preceding lines provide suggested configuration. You should consult the GNU GRUB
manual for descriptions of each line and additional configuration options to suit your business needs.
The GNU GRUB manual is available from the following directory on the virtual machine: usr/share/
doc/. Additionally, you should refer to the About the GRUB2 Boot Loader section of the Oracle Linux
Administrator's Guide for more information.
Tip
Use the following keys to navigate the boot menu: v for down-arrow and ^ for up-
arrow.
Bug 21229730
This issue occurs because running HVM virtual machines do not support the function to attach CD-ROM
drives.
Workaround: Stop the virtual machine and then attach the CD-ROM drive.
Bug 21300944
8.44 Deleting Bond Ports for VLANIF Interfaces Deletes the VLANIF
Deleting a bond port that is in use by a VLANIF interface configuration also deletes the VLANIF interface.
93
(SPARC Only) NFSv4 Delegation Interferes with Cluster Heartbeat,
Using NFSv3 Results in RPC Error PROGRAM/VERSION MISMATCH
Bug 21217364
It is not possible to use NFSv3 as this results in an RPC error reporting a "PROGRAM/VERSION
MISMATCH" and can cause the cluster database to hang due to the NFSv3 locking mechanism. This is
expected behavior.
Workaround: There is no workaround for this issue. Only NFSv4 is supported for SPARC clustering, and
you must disable delegation for this to work.
Workaround: Delete the package.mf file before you import the virtual appliance into Oracle VirtualBox.
Alternatively, export the virtual appliance from Oracle VM as an OVA file.
Bug 21261077
Bug 21062991
Bug 21466879
94
(x86 Only) Cannot Boot Oracle VM Server with Broadcom 57840S CNA Card After PXE Install
Workaround: Do not use PXE boot to install systems that make use of this hardware.
Bug 20830496
If the port is used for the Management Network, it is possible that the server is no longer accessible to the
Oracle VM Manager and you must correct the networking manually on the server. This may require you to
reissue a DHCP request by running the dhclient command on the command line of the server, or it may
require that you reconfigure the network interface with a static IP address and network mask. You may do
this temporarily using the ip addr command on the command line. Once your server has an IP address
within the management network range, you must rediscover the server.
Workaround: There is no workaround for this issue. You must ensure that your infrastructure is fully
functional and that servers are able to obtain IP addresses from the DHCP server if you choose to use
Dynamic Mode for IP address assignment for a server. Alternately, use Static IP addressing.
Bug 21370280
Workaround: Select an area of blank space in the object to drag and drop that object.
Bug 21687716
Workaround: Ensure that only one user at a time connects to Oracle VM Manager to use the Oracle VM
Manager Administrator Tool (ovm_admin).
95
Oracle VM Manager Command Line Interface TCP Port Conflicts With Port Reserved for NDMP
Bug 21679271
Workaround: Change the default port for the Oracle VM Manager Command Line Interface if you require
TCP port 10000 for other applications that use NDMP, see SSH Port in the Oracle VM Manager Command
Line Interface User's Guide.
Bug 21960034
This design decision allows virtual machines to be restarted after a move with minimum impact as all
used resources continue to be available. However, the behavior is not intuitive and may be modified in
subsequent releases.
Workaround: Be aware of the existing behavior and detach any shared disks before moving the virtual
machine. If the virtual machine needs to make use of resources on the shared disk, detach the shared disk
from all virtual machines and move it separately before reconfiguring your virtual machine to use it again.
Make sure that all virtual machines that require access to the same shared disk are located in the same
repository.
Bug 21316001
Workaround: To resolve this issue you must completely unconfigure the elements of the storage array
before attempting to remove it. Remove ownership of any repositories hosted on the storage array, remove
the storage server from any access groups and finally delete the storage array.
Bug 22313650
96
LSI Logic / Symbios Logic MegaRAID SAS 1078 is not supported on Oracle VM Server
remains in a failed state. This is because the cluster configuration falls out of sync across the members of
the cluster.
Whenever a server is added or removed from a cluster, Oracle VM Manager triggers an operation on each
Oracle VM Server in the cluster to update the cluster configuration information. However, if any servers
are offline at this time, they are unable to receive the updated configuration resulting in a configuration
mismatch between the cluster configuration on the server and the actual configuration for the rest of the
cluster. As a result, the server is no longer able to participate in the cluster.
On an x86 platform, this situation is simply represented within Oracle VM Manager and can be easily
resolved from within Oracle VM Manager. On a SPARC platform, this can cause a server to repeatedly
reboot when it comes online again due to a cluster panic.
Workaround (SPARC): In the case where a SPARC server is rebooting continuously, the problem is
caused by the server attempting to rejoin the cluster even though it is no longer a member of the cluster.
As a result, the server can panic repeatedly with a message similar to the following:
panic[cpu5]/thread=2a102a13c60:
**** dlm FENCING this system by PANICing
If this issue occurs and a server is repeatedly panicking then you can prevent the server from panicking
again by stopping the ovs-agent service and deconfiguring the cluster. To do so, connect to the server as
root and run the following commands:
# svcadm disable -s ovs-agent
# dlmcconf -S
If you are unable to run these commands because the server is panicking too quickly, then boot the server
in single-user mode:
ok boot -s
Reboot the server. The server stops panicking while the ovs-agent service is disabled. If you want to re-
enable the ovs-agent service, then you must resolve the cluster configuration issue first.
Once you have resolved the cluster configuration issue, you can acknowledge the server cluster failure
event within Oracle VM Manager to resume normal operations.
Workaround (x86): To restore the environment to normal operation, you must first acknowledge the server
cluster failure event within Oracle VM Manager. Remove any servers from the server pool that were offline
when you made the configuration change, and then add them back to the server pool, so that the cluster
configuration information can be properly refreshed for that server.
There are no workarounds for this issue. You must upgrade your hardware.
97
(SPARC Only) Hot-added CD-ROM Device is Detected As Hard Disk
Workaround: There is no workaround to this issue. Remain aware that when hot-adding a virtual CD-ROM
device, this is detected as a virtual disk instead and is mapped in Solaris as a /dev/dsk/c1dXsX entry.
Bug 21278127
Workaround: You should first examine all components of the infrastructure, such as switches, cables, and
HBAs, to ensure that no defects or failures exist. If, after a subsequent refresh, the LUNs still appear to be
missing, you can perform the following steps to resolve this issue:
Based on the preceding example, you can enter rport-1:0-2 to cover [1:0:2:1], [1:0:2:2], [1:0:2:3],
and so on.
# cd /sys/class/fc_remote_ports/rport-1:0-2/
4. Increase the timeout value to just over the amount of time it takes for the LUN to return to the running
state. The value that you set should be less than the value of the dev_loss_tmo option in the same
directory. You should need to change only one of the affected LUNs.
98
(SPARC Only) Size of Physical Disk in Oracle VM Manager Incorrect When LUN Size is Decreased on Storage Array
Bug 22322461
This problem does not occur when the LUN size is increased.
Workaround: The reported LUN size can be updated by rebooting the Oracle VM Server for SPARC
where the LUN is mapped as a physical disk after you have resized the LUN. Once the server is back
online, you must refresh the storage array where the affected LUN is located. The correct size is displayed
for the LUN within Oracle VM Manager.
Bug 22087392
Workaround: To refresh the information displayed for the apparent size of a repository within the Oracle
VM Manager Web Interface, you may click on an alternate tab and then return to the view of the repository
to force the page to refresh.
Bug 22147488
99
Oracle Linux 5 Virtual Machines Converted from Physical Hosts Do Not Boot
Bug 22460766
Bug 22285006
Workaround: This exception is due to a known issue with Oracle WebLogic Server. You can ignore
the exception. Subsequent attempts to edit or perform an operation on the virtual machine should be
successful.
Bug 22451280
During an upgrade, each instance of Oracle VM Server in the server pool is upgraded separately, which
results in a mixed version server pool until the upgrade process is complete. For this reason, mixed version
server pools are supported only during an upgrade of Oracle VM Server.
100
Oracle VM Manager Displays Incorrect Details for ZFS Storage Appliances After Cluster Failover
Bug 22516403
Workaround: Stop all running virtual machines, unpresent the repositories, and then delete the NFS
servers from Oracle VM Manager.
Bug 21466858
Workaround: Remove the netapp-osc-linux plug-in before you upgrade Oracle VM Server to Release
3.4.1. When the upgrade successfully completes, reinstall the netapp-osc-linux plug-in.
Bug 21052337
Note
Bug 22374697
101
Aborting An Oracle VM Server Upgrade Initiated By The UpgradeServers.py
Script May Result In Inconsistent Reporting on Upgrade Status
Bug 22478672
Workaround: Reboot the affected server and then disable maintenance mode on the server.
Bug 22488078
Workaround: There is no workaround. Only use dump levels of 0 or 1 if using the makedumpfile
command.
Bug 22329501
The network statistics are captured as unsigned integers. This means that they have a range of [0,
4294967295]. If the number of bytes received is greater than 4 GB the value of the integer overflows and
begins from 0 again. In this situation, it is possible the start value for the statistic recorded by Oracle VM
Manager is greater than the end statistic. Once this has occurred, Oracle VM Manager sets this statistic to
-1 as it is no longer meaningful or valid.
If you have a DRS/DPM policy set to trigger on network load, the following error may appear in the log:
In the event that an invalid network statistic is returned, the statistic is ignored by the DRS/DPM algorithm
for that cycle. Normal behavior resumes on the next cycle. This bug has a very limited effect and is only
noticeable on very loaded networks where the occasional log message may appear.
102
CPU Affinity After Live Migration of Virtual Machine on Non-Uniform Memory Access (NUMA) Systems
Workaround: There is no workaround required for this issue. It is expected behavior and the issue is
resolved automatically by the environment.
Bug 22550810
Workaround: Before performing the live migration of virtual machines, configure CPU pinning in the guest
vm.cfg file. For example, to pin a virtual machine with 4 VCPUs to physical CPUs 4, 5, 6, and 7, add the
following line to the vm.cfg:
cpu = "4-7"
Bug 22382809
Workaround: Upgrade the guest operating system to Oracle Solaris 11.3 or higher.
Bug 22085158
8.75 Changing Domain Type from Xen HVM to Xen HVM PV Drivers
Causes Informational Messages in AdminServer.log
Changing the domain type of a virtual machine from Xen HVM to Xen HVM PV Drivers results in the
following informational messages of type vm.domain.mismatch and vm.os.mismatch being written to
AdminServer.log.
This issue occurs because Oracle VM Server does not distinguish between the Xen HVM and Xen HVM
PV Drivers domain types. When the domain type of the virtual machine changes to Xen HVM PV Drivers,
Oracle VM Server reports the domain type of the virtual machine as Xen HVM to Oracle VM Manager. As a
result, Oracle VM Manager falsely detects an error and logs the informational messages.
Workaround: You can ignore the informational messages and change the domain type of the virtual
machine to Xen HVM PV Drivers. The virtual machine successfully loads the PV drivers despite these
messages.
Bug 21163194
103
Error Partitioning Caused by Disk Label or Format in UEFI Mode
Workaround: This issue occurs because UEK Release 4 includes support for the TCP Small Queues
(TSQ) mechanism. To resolve this issue, you can configure the guest virtual machine with the following
command:
echo 1048576 > /proc/sys/net/ipv4/tcp_limit_output_bytes
Bug 22546060
3. Use the parted command to change the label of the disk. Alternatively, use the dd command to clean
up the disk.
4. Return to the installation program and then select Back to return to the previous installer screen.
Bug 22503847
8.78 Kernel Panic when Booting Guest Virtual Machine with Oracle
Solaris 11.2
When creating a virtual machine with a guest operating system of Oracle Solaris 11.2 on Oracle VM
Server, a kernel panic occurs when the virtual machine boots.
Bug 22457279
This issue occurs when using a version of Mozilla Firefox that is lower than Version 44.0 on a Linux
system to access the Oracle VM Manager Web Interface. This issue does not affect the jobs in Oracle VM
Manager to create a new repository.
104
HugePages Deprecated for PVM Guests as of Oracle VM Release 3.4.1
Bug 22553553
If you have HugePages enabled for any PVM guests, Oracle recommends that you change the domain
type for virtual machines from Paravirtualized (PVM) to Hardware virtualized, with paravirtualized drivers
(PVHVM). If you cannot change the domain type for a virtual machine, you should disable the HugePages
setting and then restart the virtual machine.
Bug 22540900
Workaround: There is no workaround for this issue. However, Oracle recommends that you do not enable
HugePages for any PVM guests. See Section 8.80, “HugePages Deprecated for PVM Guests as of Oracle
VM Release 3.4.1”.
Bug 22746016
Bug 22508971
Bug 22488522
105
Do Not Discover Oracle VM Servers Earlier than Release 3.2.10
• Conflicts occur between the databases that Oracle VM Manager requires for maintaining synchronization
between internal components. As a result, the Oracle VM Manager Web Interface can display inaccurate
information about the Oracle VM environment.
• The instances of Oracle VM Server, earlier than Release 3.2.10, that you discover cannot be removed
with either the Oracle VM Manager Web Interface or the Oracle VM Manager Command Line Interface.
Workaround: Do not use Oracle VM Manager Release 3.4 to discover or interact with any instances of
Oracle VM Server earlier than Release 3.2.10.
Bug 22735203
In this case, when you attempt to export the virtual machine as a virtual appliance with the Oracle VM
Manager Command Line Interface, the following error message is displayed:
Server error: vbox-img didn't return expected value (0,)
CMDERR:
vbox-img: error: VD: error VERR_FILE_NOT_FOUND opening image file '/dev/mapper/<disk_Id>'
vbox-img: error: Error while opening source image: File not found.
(VERR_FILE_NOT_FOUND)
Bug 22745868
8.86 (SPARC Only) MTU Resets to the Default of 1500 After Server
Power Off
If you configure the MTU parameter of a network interface for an ethernet bridge and then power off the
Oracle VM Server for SPARC, the MTU used by the bridge after the boot can be reset to the default value
of 1500 instead of the configured value.
Workaround: When the interface used for the bridge is persistently plumbed in the primary domain, the
bridge is created with the appropriate MTU parameter after the server power off and reboot. Use the
ipadm(1M) command to persistently plumb a network interface, as in the following example:
# ipadm create-ip net0
106
Oracle VM Server Installer Fails When Modifying Swap Partitions
Bug 22705349
Workaround: Do one of the following from the Review Partition Layout screen:
• Select Yes to review and modify the partitioning layout. On the Partitioning screen, delete the swap and
then create a new one.
• Select No to skip the partitioning layout check and proceed with the installation.
Bug 22807435
Bug 22761370
8.89 Cannot Enable High Availability (HA) for Virtual Machines with
HugePages
If you attempt to enable HA for a running virtual machine that has HugePages enabled, the job to enable
HA fails with the following error message:
OVMRU_005002E Operation not allowed- Virtual Machine: vm_name, is not STOPPED. It is RUNNING.
This error occurs if you attempt to enable HA in either the Oracle VM Manager Web Interface or the Oracle
VM Manager Command Line Interface.
The preceding error message does not accurately describe the issue. The fact that the virtual machine is in
the running state does not affect the ability to enable HA. The error results from the fact that HugePages is
enabled for the virtual machine.
Workaround: Disable the HugePages setting and then restart the virtual machine. After the virtual
machine starts, enable HA.
Bug 22753803
Bug 22816860
107
Virtual Machines Hang at Boot if Grant Reference Request Too Large
As of Oracle VM Release 3.4.1, the addition of multi-queue support for Xen network and block drivers to
increase I/O throughput requires an increased number of grant references and queues.
Note
Grant references relate to the Xen grant table mechanism. See the Xen
documentation for more information.
Workaround: Decrease the value of the xen_netback max_queues option in the /etc/modprobe.d/
ovs.conf file on Oracle VM Server. The default value is 8. You can decrease this value to 2, for example.
After you save the changes to ovs.conf, you must restart Oracle VM Server for them to take effect.
# Limit Xen netback max queue to 8
options xen_netback max_queues=2
Bug 22814818
If you attempt to import an object from a URL that exceeds the maximum character length, an error occurs
and the import fails, as in the following example:
OVMAPI_D000E Cannot set description on object: my_virtual_appliance.ova.
Its length: 4,012, exceeds the maximum size: 4,000.
Even though the error message indicates the maximum character length is 4,000, a prefix is automatically
added to the URL during the import job. As a result, the effective character limit for the URL is 3,988 or
3,985.
108
Performance Impact for Less than 8 CPUs Configured for dom0
Workaround: There is no workaround for this issue. Ensure that the origin URL for any object that you
plan to import into Oracle VM Manager is not greater than the maximum character limit.
Bug 23073177
8.94 Performance Impact for Less than 8 CPUs Configured for dom0
For best performance, if dom0 is configured with less than 8 CPUs, the xen_netback max_queues
option in the ovs.conf file should be set to the number of CPUs configured for dom0. For example, if you
configure dom0 with 6 CPUs, then you should set the value of the xen_netback max_queues option to
6.
Workaround:
3. Set the value of the xen_netback max_queues option equal to the number of CPUs configured for
dom0.
Bug 22817196
Workaround: Before migrating a PVHVM guest virtual machine from one instance of Oracle VM Server
to another, update the Linux kernel version to 3.8.13-104.el6uek.x86_6 or higher to avoid soft
lockup issues. For more information, see PVHVM Guest Was Not Reachable After Being Live Migrated
Document ID 2204849.1, on My Oracle Support at: https://support.oracle.com/oip/faces/secure/km/
DocumentDisplay.jspx?id=2204849.1.
Bug 20878962
Bug 21957308
109
Limit of 3 Virtual Machine Console Windows with Microsoft Internet Explorer
against an LDAP or Active Directory and then perform an upgrade, that configuration is not restored after
the upgrade is complete.
Workaround: Complete the steps to enable LDAP or Active Directory authentication after you successfully
upgrade Oracle VM Manager.
Bug 21314388
• Refer to the appropriate Microsoft documentation for information on changing the maximum number of
concurrent WebSocket connections.
Bug 21617374
You must reboot the Oracle VM Server and then complete the upgrade process by manually upgrading
Oracle VM Server with the installation media. When you successfully complete the upgrade, the instance
of Oracle VM Server that you manually upgraded is in maintenance mode. Taking the server out of
maintenance mode then causes the following error:
VMAPI_2005E "ID" contains a component "ID" in error.
Error event: server.upgrade.in.progress., Summary: Server Upgrade in Progress,
Description: Upgrade continuing after an interruption.
This issue occurs if you upgrade to Oracle VM Release 3.3.4 through multiple previous releases. For
example, if you upgrade from Release 3.1.1 to Release 3.2.9 and then upgrade to Release 3.3.2.
Workaround: Clear the server.upgrade.in.progress. event from the Oracle VM Manager database
as follows:
110
Kdump Service on Oracle Sun Server X4-4 with QLogic QLE2562 HBA
The statement returns an object ID for the instance of Oracle VM Server to which the event applies, as
in the following example:
+--------------------+------------------------------------+
| associatedObjectId | description |
+--------------------+------------------------------------+
| 303 | Server: server_name, is being upgraded. |
+--------------------+------------------------------------+
1 rows in set (0.00 sec)
6. Run the following statement, substituting object_ID with the object ID that was returned with the
preceding statement:
mysql> update OVM_EVENT set acknowledged=1 where associatedObjectId=object_ID and type=
'server.upgrade.in.progress.';
The statement acknowledges the event and displays a message such as the following:
Query OK, 1 row affected (0.01 sec)
Rows matched: 1 Changed: 1 Warnings: 0
For information about manually upgrading Oracle VM Server with the installation media, see Upgrading
Oracle VM Server Using the ISO File in the Oracle VM Installation and Upgrade Guide.
111
The kdump Service Cannot Mount the Root Partition if Zone Connection to EMC Storage Array
Bug 22729287
8.101 The kdump Service Cannot Mount the Root Partition if Zone
Connection to EMC Storage Array
The kdump service on Oracle VM Server cannot mount the root partition if the host has a zone connection
to an EMC storage array.
Bug 22605466
Workaround: Allocate as much space as possible to the boot partition before you attempt to upgrade
Oracle VM Server. At a minimum, you should allocate 500MB for the boot partition.
Bug 22600941
Workaround: Disable GRO manually on each affected Oracle VM Server, using ethtool:
# ethtool -K ethX gro off
Bug 21353855
Workaround: If you used the client library OvmWsClient.jar provided in the SDK within your client code,
this problem is easily remedied by simply updating the OvmWsClient.jar file with a version from the current
112
Restart Virtual Machines After Upgrade
release. Alternately, if you did not use the supplied client library and relied on the WSDL to build your own
library instead, you may need to rebuild your own library.
Important
The SOAP API is deprecated and support will be discontinued in future releases.
If you are affected by this bug, consider changing your code to use the REST API
instead. This is the preferred approach to resolving this issue.
Bug 22005704
Bug 20826023
Bug 20390704
Workaround: Disable the transitional update repository before upgrading Oracle VM Server Release 3.3.
Bug 20288874
8.108 (X86 Only) SWIOTLB Buffer Errors When Using Jumbo Frames
on Oracle VM Server
When a network port has been configured for jumbo frames on an Oracle VM Server, errors may appear
in the logs of the Oracle VM Server indicating that the SWIOTLB buffer is full. The SWIOTLB is a software
component used by the Xen hypervisor. By default, 128 chunks of 512 KB of memory are allocated to
SWIOTLB. On an active Oracle VM Server with jumbo frames enabled, these chunks of memory can be
used up quickly, degrading network performance and resulting in errors in the system log.
Workaround: Change the Oracle VM Server grub configuration to append the swiotlb=256 option to the
kernel line.
Bug 20693762
113
One Instance of Oracle VM Manager Web Interface Per Browser Session
operation that contains child operations fails, it is important to check the state of all objects affected by the
parent and child operations. For example, during the creation of a server pool, the parent command calls
a number of child operations. If any of these child operations fail, the command returns an error, but the
server pool object may still be created by the parent operation. In this case, the server pool object must be
removed manually before attempting to create the server pool again.
Workaround: If an operation fails, check to ensure that the object you were attempting to create is not
listed within Oracle VM Manager. If the object is listed, you must remove it before attempting to create it
again.
Workaround: Connect to one instance of the Oracle VM Manager Web Interface per web browser
session.
Bug 14005821
Workaround: Navigate to another page in the UI, then return to the Virtual Machines perspective in the
Servers and VMs tab. The text is the correct color, black.
Bug 14027051
Workaround: Update your web browser to a more recent version, or try using an alternative web browser.
Bug 17832280
114
Safari Web Browser on Windows is not Supported
Bug 18025985
Workaround: If you are using the Oracle VM Manager Web Interface to perform the edit, close the edit
dialog and then reopen it to refresh the data that is contained within it before attempting to retry the edit
operation.
If you are using the Oracle VM Manager Command Line Interface perform a show operation against the
object to see the current values and to ensure that the object is not locked. Objects that can be locked
include a 'locked' attribute that is displayed when you perform a show operation. If the object is no longer
locked, you can retry your edit.
Bug 18385924
If you need to batch edit the NTP servers for a large number of Oracle VM Servers in your environment,
you should use the Oracle VM Manager Command Line Interface or the Oracle VM Web Services API to
do this programmatically.
Bug 18435973
The fix is to disable Intel VT-d (Intel Virtualization Technology for Directed I/O) functionality within the
BIOS.
115
(x86 Only) Oracle VM Server Installer Hangs Waiting for Hardware to Initialize
Bug 17817142
This behavior only occurs in the installer, and is not present once Oracle VM Server has completed
installation.
The fix is to correct the BIOS setting and disable the floppy drive.
Bug 18036268
To resolve this issue add a line to your Kickstart configuration similar to the following:
ignoredisk --only-use=/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0
Change the path of the --only-use parameter to match the target disk that you intend to install to.
See the Oracle VM Installation and Upgrade Guide for more information on this and on Kickstart
installations.
Bug 17586422
Bug 17457813
116
(x86 Only) Oracle VM Server Upgrade From ULN or Oracle Public Yum
Repositories is Restricted to Servers That Do Not Use Non-Native Packages
Bug 17946919
8.123 (x86 Only) Many ISCSI or Fibre Channel LUNs Require More
Server Memory
As the number of iSCSI or Fibre Channel LUNs or targets used by an Oracle VM Server is increased, the
memory consumption increases on the server. This is normal, as more memory is required by dom0 to
connect to each LUN or target. Therefore, if you intend to add a large number of LUNs to a server, you
must allocate an appropriate amount of physical memory to the server to handle this, and the additional
memory must be assigned to dom0 for use. Typically this should be around 1 MB per LUN on top of
the memory allocated to run dom0. See Changing the Memory Size of the Management Domain for
information on how to change the dom0 memory allocation.
Memory is assigned to dom0 within the grub configuration on the server. If you are using UEFI boot,
the grub configuration file is located at /boot/efi/EFI/redhat/grub.cfg, otherwise the grub
configuration file is located at /boot/grub2/grub.cfg. Edit the line starting with 'multiboot2 /xen.gz' and
append the required boot parameters. For example, you may adjust the value for the dom0_mem parameter
as shown in the following line of the configuration:
multiboot2 /xen.gz dom0_mem=max:6144M allowsuperpage dom0_vcpus_pin dom0_max_vcpus=20
placeholder ${xen_rm_opts}
On servers running an earlier release of the current Oracle VM Server software,an earlier version of grub
may still be in use. In this case the same result can be achieved by editing the /boot/grub/grub.conf
file on the server and ammending the dom0_mem parameter in the line starting with 'kernel /xen.gz', as
shown in the following line of the configuration:
kernel /xen.gz console=com1,vga com1=38400,8n1 dom0_mem=6144M allowsuperpage
Ideally this should be allocated at installation so that the dom0 grub configuration is updated automatically.
Otherwise, you may need to adjust the grub configuration yourself.
Insufficient memory to support the number of LUNs on an Oracle VM Server results in out-of-memory
(oom) kills and server instability.
Bug 17614799
117
(SPARC Only) Cluster Recovery May Fail When Using NFSv3 For Server Pool File System
If an NFS pool file system is initialized by an x86 server then that file system can only be used for a cluster
server pool with x86 servers. Similarly, if an NFS pool file system is initialized by a SPARC server then that
file system can only be used for a cluster server pool with SPARC servers.
To prevent this issue, before creating a clustered server pool with an NFS file system, create a file system
access group for that file system with only the servers that will be in the server pool.
Bug 17490488
8.125 (SPARC Only) Cluster Recovery May Fail When Using NFSv3
For Server Pool File System
If an Oracle VM Server in a clustered server pool fails, any file locks created by the NFS server while the
Oracle VM Server was online are enforced until the Oracle VM Server recovers and notifies the NFS server
to release those locks. This can block other Oracle VM Servers in the cluster indefinitely. This behavior
is the result of the stateless nature of NFSv3 and its file locking mechanism. The locks can be cleared in
Solaris, using the clear_locks command. However, this problem is recurrent as long as you continue to
use NFSv3 to host a cluster file system.
Since NFSv4 is a stateful protocol and its locking mechanism is built into the protocol, this problem does
not occur if you use NFSv4 to host a cluster file system. Under NFSv4, the state associated with file locks
is maintained at the server under a lease-based model, where locks are leased to a client and the client
needs to renew the lease. If the client fails to renew the lease then the NFS server is free to give the lock to
another client. Therefore, SPARC-based server pools that are configured to use clustering, should use an
NFSv4 export to host the cluster file system.
Note that since x86 server pools use an OCFS2 file system, even if they are hosted on an NFS share, they
are unaffected by this problem.
Bug 18997487
• AHCI mode may be necessary to recognize the CDROM device to perform an installation from CDROM.
• Disable I/O MMU Virtualization Settings; for Intel-based servers this is VT-d; for AMD based servers this
is AMD-Vi or IOMMU. I/O MMU is not supported in this release.
Dom0 fails to load the kdump service at start-up with the following message:
kdump: No crashkernel parameter specified for running kernel
Workaround: Specify a valid fixed memory range suitable for the server hardware if you choose to use
this parameter. For example, crashkernel=256M@64M.
118
Kdump Core Collector Using Sparse Copy Fails
Bug 18174580
If booting from the installation media, press F2 when the initial boot screen is displayed and provide the
following additional parameters as part of the boot command:
mboot.c32 xen.gz extra_guest_irqs=64,2048 nr_irqs=2048 --- vmlinuz --- initrd.img
If using a kickstart installation, add the additional kernel parameters to the PXE configuration file.
If you want to make these changes permanent, edit the /boot/grub/grub.conf file in your Oracle VM Server
after the installation has completed.
Bug 12657272
Bug 14667345
Workaround: Use IPMI (Intelligent Platform Management Interface) to start or restart Oracle VM Servers
in a server pool that are on different subnets.
Bug 12410458
119
(x86 Only) Sun Fire X4170 Server Not Fenced During Cluster Failure
8.132 (x86 Only) Sun Fire X4170 Server Not Fenced During Cluster
Failure
In some situations where a Sun Fire X4170 server has a hardware failure or fault/error, the Oracle VM
Server may not be fenced and removed from the cluster, even though it is not available to participate in the
cluster.
Workaround: Fix the hardware fault, and/or clear the error messages/faults using the ILOM CLI.
Bug 14463948
Bug 12861134
8.134 (x86 Only) ACPI Buffer Error After Installing Oracle VM Server
On some Intel-based systems, the following error may occur after installing Oracle VM Server when the
computer is started:
[ 0.674742] ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits)
(20090903/dsopcode-596)
[ 0.675167] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_._OSC] (Node ffff88002e4fba50), AE_AML_BUFFER_LIMIT
This has been observed on systems with the following BIOS information, but may also occur in other BIOS
versions:
HP ProLiant BL685c G6 HP BIOS A17 12/09/2009 Backup Version 12/01/2008 Bootblock 10/02/2008
120
(SPARC Only) Serial Console Hangs During Installation of Oracle Solaris 11 on Virtual Machine
Workaround: If a server is in warning state after a failed DPM operation, acknowledge the related event.
The server assumes its normal operational role again and the warning is cleared.
Bug 18962618
Workaround: Manually access the console from the Oracle VM Server hosting the virtual machine,
by identifying UUID and the port where the virtual machine is running, and then telnetting to that
port from the Oracle VM Server. For example, to access the console for a virtual machine with UUID
0004fb00000600000a395ecc901e7822:
# ldm list
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 16 16G 9.3% 44d 20h 41m
0004fb00000600000a395ecc901e7822 active -n---- 5000 8 4G 0.2% 2d 14m
0004fb000006000014fcd950934fbb3f active -n---- 5001 8 4G 0.6% 4d 22h 51m
0004fb00000600006e6e2b1504cf6f64 active -n---- 5003 8 4G 0.2% 2d 9m
0004fb0000060000fc8632393068ee2b active -n---- 5002 8 4G 0.2% 3d 19h 4m
Bug 18082287
Manual changes made to the virtual machine configuration file (vm.cfg) are not reflected in Oracle VM
Manager. Any manual changes to the vm.cfg file may result in unexpected and undesirable behaviour. For
example, if you edit the HA setting in the vm.cfg to disable HA, and the virtual machine is stopped by any
method other than using Oracle VM Manager, the virtual machine is restarted. Oracle VM Manager is not
aware of the HA change in the virtual machine's configuration file.
121
(SPARC Only) Wrong Error Message Returned When Importing A Template From An Incorrect URL
completes successfully despite the error message, but it does not appear in the list of available templates
in the storage repository.
To resolve this problem, refresh the storage repository. The uploaded template file should then appear in
the list. In some cases the imported template turns out to be incomplete. In that case, you should delete
the template and import the template again.
If you receive an error indicating that the certificate could not be verified, check that the file that you are
attempting to import is accessible at the URL that you provided.
Bug 18003814
Workaround: Disable ACPI within the BIOS for each of the Oracle VM Servers within the cluster.
Bug 14747722
8.141 (x86 Only) Oracle Solaris 10 Virtual Machine May Hang During
Shutdown
When performing a graceful shutdown from within a virtual machine running Oracle Solaris 10, or when
attempting to stop the virtual machine from within Oracle VM Manager, or when performing a migration of
the virtual machine, the virtual machine may hang during the shutdown process. This may be caused by
an operating system error, or some other unknown error. You can use the virtual machine console in the
Oracle VM Manager Web Interface to check for operating system errors.
This bug does not affect virtual machines running Oracle Solaris 11.
Workaround: Kill the virtual machine affected using the Kill VM option within Oracle VM Manager.
Bug 15863719
Bug 12905120
122
(x86 Only) Maximum Memory to Start a PVM Guest is 470 GB
Bug 18538335
8.144 (x86 Only) Creating a PVM Guest Slow Using Local Storage
Creating a PVM guest using local storage may take a very long time. This may be caused by write caching
being turned off for the local disk.
Workaround: Enable write caching for the disk using the hdparam utility.
Bug 12922626
Bug 14276606
If your guest virtual machine's operating system is Linux-based, the following workaround may reduce the
mouse control issue. Enter the following on the guest's command line:
# xset m 1 1
1. During the installation or first time boot up, edit the grub menu and append the -kd kernel boot
parameter.
2. Continue with the boot to run the Solaris kmdb. When the following screen prompt is displayed:
Welcome to kmdb
[0]>
123
(x86 Only) Solaris 10 Release 8/11 Guest Hangs at Boot
3. After Solaris is installed and booted up, append the following line to the /etc/system file to make this
change persistent across system reboot.
set cmi_no_init = 1
Bug 13332538
Workaround: To make Solaris 10 run, kill the virtual machine from Oracle VM Manager and then apply the
following manual fix:
1. At boot, edit the grub menu: append the -kd kernel boot parameter. This runs the Solaris kernel
debugger.
5. When Solaris has been installed and has successfully booted, make this fix persistent by adding the
following line to /etc/system:
set apix_enable = 0
Bug 13876544
8.149 (x86 Only) Solaris 11 Guest With More Than 2 VCPUs Hangs at
Boot
When booting a virtual machine with running Oracle Solaris 11 and configured with more than 2 virtual
CPUs, the guest OS may hang. This is caused by a Solaris bug related to a change in the Xen hypervisor
that was fixed in Oracle Solaris 11.2 SRU 8.4.
Workaround: To make Solaris 11 run on Oracle VM 3.4 with more than 2 virtual CPUs, either upgrade to
Oracle Solaris 11.2 SRU 8.4 or above, or perform the following steps to implement a manual fix:
1. During the installation or first time boot up, edit the grub menu and append the -kd kernel boot
parameter.
2. Continue with the boot to run the Solaris kmdb. When the following screen prompt is displayed:
124
(x86 Only) Solaris 11 Release 2011.11 Guest Hangs at Boot
Welcome to kmdb
[0]>
3. After Solaris is installed and booted up, append the following line to the /etc/system file to make this
change persistent across system reboot.
set cmi_no_init = 1
Bug 18547858
Workaround: To make Solaris 11 2011.11 run on Oracle VM 3.4, use the SRU 2a, or apply the following
manual fix to the GA release:
1. At boot, edit the grub menu: append the -kd kernel boot parameter. This runs the Solaris kernel
debugger.
4. When Solaris has been installed and has successfully booted, make this fix persistent by adding the
following line to /etc/system:
set pcplusmp:apic_timer_preferred_mode = 0x0
For more information, please consult the Support Note with ID 1372094.1. You can also find this document
by logging on to My Oracle Support and searching the knowledge base for 1372094.1.
Bug 13885097
8.151 (x86 Only) Windows Server 2008 R2 x64 HVM Guests do Not
Cleanly Shut Down
Windows Server 2008 Release 2 64-bit hardware virtualized guests fail to shut down cleanly. After the
guest has been shut down, and started again, Windows reports that it was not shut down cleanly.
125
(SPARC Only) Need Actual Available Memory for Live Migration
This is not an issue for Windows Server 2008 Release 2 32-bit hardware virtualized guests with
paravirtualized drivers (PVHVM).
Bug 12658534
Bug 14851322
Workaround: After the virtual machine is created, add up to five new network cards by editing the virtual
machine in Oracle VM Manager.
Workaround: To work around this problem install the qlcnic driver module with the option "use_msix=0".
To do this, create the file /etc/modprobe.d/qlcnic.conf and ensure that it contains the following line:
options qlcnic use_msi_x=0
For the change to take effect, you should reboot the server. To temporarily disable the option for the
module without rebooting, you can perform the following steps:
# ifconfig ethx down
# rmmod qlcnic
# modprobe qlcnic use_msi_x=0
Workaround: Determine which interface name the QLogic cLOM8214 1/10GbE Ethernet NIC should use,
for example eth1. Find the MAC address for the QLogic cLOM8214 1/10GbE Ethernet NIC that you want to
126
(x86 Only) Incorrect ARP Reply When Using Jumbo Frames
configure. You can do this by running the following command and studying its output to find the incorrectly
named interface:
# cat /etc/issue
IF : bond0 MAC : 1c:c1:de:74:b9:34 IP : 10.211.1.135
IF : eth0 MAC : 1c:c1:de:74:b9:34
IF : eth1 MAC : 1c:c1:de:74:b9:35
IF : __tmp713192749 MAC : 24:be:05:ef:5a:f4
Finally, bring up the interface using the ifconfig command. For example:
ifconfig eth2 up
Bug 15897549
8.156 (x86 Only) Incorrect ARP Reply When Using Jumbo Frames
ARP Flux can cause confusion to some 10G switches when using jumbo frames causing network traffic to
stop.
Workaround: disable ARP flux on the affected server. If the interfaces are all on different sub-networks,
run the following command:
# sysctl -w net.ipv4.conf.all.arp_filter=1
If some of the interfaces are on the same sub-network, run the following commands:
# sysctl -w net.ipv4.conf.all.arp_ignore=1
# sysctl -w net.ipv4.conf.all.arp_announce=2
If you wish to make these changes permanent, add the relevant ARP parameter settings to /etc/
sysctl.conf:
net.ipv4.conf.all.arp_filter=1
net.ipv4.conf.all.arp_ignore=1
net.ipv4.conf.all.arp_announce=2
Bug 17982926
Workaround: Edit the /etc/ocfs2/cluster.conf file on each Oracle VM Server in the network to
reflect the new IP address, and restart each Oracle VM Server.
127
NFSv4 Read/Write Delegation Not Supported
Bug 12870099
The following procedures provide examples for disabling NFS V4 read/write delegation on different network
storage devices. You should refer to the manufacturer's documentation for your storage device to review
additional details.
To disable read/write delegation on an Oracle ZFS Storage Appliance, log in to the browser user interface.
Select Configuration and then Services. Locate and then click NFS. Deselect Enable NFSv4
delegation and then click Apply.
To disable read/write delegation on a NetApp filer, go to the NetApp console. Select FilerView, then
click NFS->Configure. Select no on the following two pull-down menus:
Bug 18391474
8.159 (x86 Only) Unclean File System Causes Errors When Used as
a Server Pool File System
If a server pool file system is not clean (contains existing files and server pool cluster information) and used
to create a server pool, a number of errors may occur.
• Cannot create a server pool using the file system. The following error is displayed:
OVMAPI_4010E Attempt to send command: create_pool_filesystem to server: server_name failed.
OVMAPI_4004E Server Failed Command: create_pool_filesystem ... No such file or directory
Bug 12839313
• An OCFS2-based storage repository becomes orphaned (the clusterId that was used when the OCFS2
file system was created no longer exists), you cannot mount or refresh the repository, and the following
error is displayed:
"OVMRU_002037E Cannot present the Repository to server: server_name. Both server and repository
need to be in the same cluster."
Workaround: Clean the file system of all files before it is used as a server pool file system.
Bug 12838839
128
(x86 Only) Size of New LUN on Server is Incorrect If an Existing LUN Is Unmapped First
Solaris I/O Multipathing should not be disabled on an Oracle VM Server, particularly where that server may
access iSCSI disks with multiple paths.
Bug 18648267
Remapping LUNs is risky because it can data corruption since the targets have been switched outside of
the server. An error should appear in the messages file:
Warning! Received an indication that the operating parameters on this
target have changed. The Linux SCSI layer does not automatically adjust
these parameters.
Workaround: Ensure that when exposing a new target, you do so with a LUN that has not previously been
used since the last reboot.
Bug 14851579
This is due to the fact that the Oracle VM Server sees the LUN size as zero and fails the multipath path to
the LUN while the default path checker for NetApp TUR sees the path as up. The vacillating path statuses
can cause IO to the affected LUN to hang.
Remapping LUNs is risky because it can data corruption since the targets have been switched outside of
the server.
Workaround: One way to ensure that the Oracle VM Server maintains a consistent view of the path
and avoids a possible hang scenario is to change the path checker for NetApp in mulipath.conf to
directio. Note that directio is not considered as performant as TUR. Running the following command
on the affected Oracle VM Server clears the hang:
# iscsiadm -m node -R
Bug 18421164
Workaround: Clear all files and file system information on the LUN before placing a storage repository on
it.
Bug 13806344
129
NetApp ONTAP (8.2 c-mode) Operating System Does Not Work With Oracle VM
8.164 NetApp ONTAP (8.2 c-mode) Operating System Does Not Work
With Oracle VM
The current NetApp ONTAP (8.2 c-mode) operating system has an NFS related issue with the showmount
-e command. This issue prevents Oracle VM from seeing any NFS file systems on a NetApp storage
appliance running this operating system.
NetApp has provided a workaround for ONTAP 8.2 on the NetApp support site. Further instructions are
provided for resolving this issue on My Oracle Support with Doc ID 1640848.1 available at the following
URL:
https://support.oracle.com/epmos/faces/DocumentDisplay?id=1640848.1
You must reapply the workaround after you have upgraded an Oracle VM Server.
8.165 (x86 Only) Black Listing of System Disks for Legacy LSI
MegaRAID Controllers Not Supported
Oracle VM Server cannot add the system disks for Legacy LSI MegaRAID (Dell PERC4) bus controllers to
the /etc/blacklisted.wwids file, so the disks are not blacklisted in the multipath configuration. This
occurs because the bus controllers are not capable of returning a unique hardware ID for each disk. Using
system disks on Legacy LSI MegaRAID (Dell PERC4) bus controllers is therefore not supported.
Bug 12944281
Workaround: Configure multipathing to blacklist the CCISS system devices by adding a new line to the
multipath.conf file:
# List of device names to discard as not multipath candidates
#
## IMPORTANT for OVS do not remove the black listed devices.
blacklist {
devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st|nbd)[0-9]*"
devnode "^hd[a-z][0-9]*"
devnode "^etherd"
+ devnode "^cciss!c[0-9]d[0-9]*" <<====
%include "/etc/blacklisted.wwids"
}
Note
This workaround is not required for HP Smart Array disks backed by the HPSA
module.
130
(x86 Only) HP Smart Array CCISS Disk Devices Are Not Supported For Creation of Local Storage Repositories
Bug 12722044
8.167 (x86 Only) HP Smart Array CCISS Disk Devices Are Not
Supported For Creation of Local Storage Repositories
HP Smart Array disk devices backed by the older CCISS module are not supported for use as a local
storage repository, or for use as raw disks for virtual machines, or for server pool file systems. HP Smart
Array disk devices backed by the HPSA module are fully supported.
To verify whether the controller has support for the HPSA module, first obtain the PCI ID of the raid
controller for the local disk using the following command:
lspci -vnn|grep "RAID bus controller"
Check the list of controllers supported by the HPSA module to confirm whether or not your controller's PCI
ID appears within the list, by running the following command:
modinfo hpsa -F alias
If your controller is supported, ensure that you use the HPSA module instead of the CCISS module for your
controller.
Bug 16072257
Top level directories which also contain subdirectories in the exports file may also cause problems, for
example, if an export file contains /xyz as an export location, and also contains /xyz/abc. In this case, the
following error may be displayed during a refresh file system job:
OVMRU_002024E Cannot perform operation. File Server: server_name, has invalid exports.
Workaround: For the second issue, to work around this problem, do not export top level file systems in the
NAS-based file server's exports file.
Bug 12800760
131
(x86 Only) Shared OCFS2 Cluster File System on Virtual Disk Not Supported
8.170 (x86 Only) Shared OCFS2 Cluster File System on Virtual Disk
Not Supported
When you create a configuration with virtual machines sharing an OCFS2 cluster file system on a virtual
disk, severe I/O interruptions may occur. These may affect the heartbeating function of a clustered server
pool and even cause Oracle VM Servers to reboot. Therefore, a shared OCFS2 cluster file system on a
virtual disk is not a supported configuration.
Workaround: Use a physical disk or LUN. Make sure that the virtual machines in your configuration have
shared access to this physical disk or LUN, and create the shared OCFS2 cluster file system there.
Bug 13935496
Workaround: Check for misaligned partitions in the virtual disk images and, if any are found, recreate the
disk images with properly aligned partitions. To determine whether partitions are correctly aligned, use
fdisk -lu to find the starting sectors of the partitions. Ensure that these are a multiple of 8 (512 byte
sectors), which aligns them at 4 KB, the OCFS2 block size.
Note
Many recent operating systems often start the first partition in sector 2048, aligning
it to 1 MB, which works well for most storage RAID stripe sizes.
Bug 14355588
132
Oracle VM Manager Command Line Interface Allows THIN_CLONE cloneType On NFS
While this does not affect the editing or submission of the command, it may be difficult to read the
command being edited. This issue has been seen on some GNOME window managers.
Workaround: Use PuTTY to connect to the CLI. Alternatively, you can use xterm, with the correct
wraparound options. You should enable the xterm auto-wraparound (-aw) and reverse-wraparound (-rw)
options. To set the xterm wraparound options correctly, start xterm with the xterm -aw -rw command.
However, when a clone is created using the clone customizer that this clone storage mapping is attached
to, the action fails due to the fact that the clone target does not support the thin clone cloneType:
OVM> clone vm name=vm1.0 destType=vm serverPool=MyServerPool
cloneCustomizer=clonecustomizer1 targetRepository=nfsrepo
Command: clone vm name=vm1.0 destType=vm serverPool=MyServerPool
cloneCustomizer=clonecustomizer1 targetRepository=nfsrepo
Status: Failure
Time: 2014-05-06 22:40:33,755 PDT
JobId: 1399441233570
Error Msg: Job failed on Core: OVMRU_007013E Cannot thin clone: System.img
(2), to: nfsrepo. The clone target does not support thin cloning. [Tue May 06
22:40:33 PDT 2014]
This is expected behavior, but the flexibility offered by the Oracle VM Manager Command Line Interface is
inconsistent with the Oracle VM Manager Web Interface and can result in misconfiguration by a user.
Bug 18716652
Performing a re-discover of the Oracle VM Server after the upgrade to 3.3 or 3.4 corrects the view that
Oracle VM Manager has of the network configuration. In version 3.3 and 3.4, VLAN port groups have been
removed. Therefore, once the system is upgraded to version 3.3 or 3.4 and a re-discover is done, the issue
is resolved.
133
Untagged VLAN Interface Missing After Upgrade of Oracle VM Manager
Bug 18758922
134
Chapter 9 Additional Software for Oracle VM
Table of Contents
9.1 Oracle VM Paravirtual Drivers for Microsoft Windows ................................................................. 135
9.2 Oracle VM Storage Connect plug-ins ......................................................................................... 135
9.3 Oracle VM Guest Additions ....................................................................................................... 135
9.4 Oracle VM Utilities .................................................................................................................... 135
9.5 Oracle OpenStack .................................................................................................................... 136
9.6 Third Party Software ................................................................................................................. 136
Additional software for Oracle VM includes tools and plugins to help you configure and integrate your
environment.
For more information, see the Oracle VM Paravirtual Drivers for Microsoft Windows documentation at:
http://docs.oracle.com/cd/E88077_01/index.html
For more information, see Installing Oracle VM Storage Connect plug-ins in the Oracle VM Administration
Guide.
• Installing and Using the Oracle VM Guest Additions in the Oracle VM Administration Guide
• What are the Oracle VM Guest Additions? in the Oracle VM Concepts Guide
135
Oracle OpenStack
For information about supported third party software, see the Oracle VM Partners page at: http://
www.oracle.com/technetwork/server-storage/vm/partners/index.html
Note
If you plan to install third party software in an Oracle VM environment and are not
sure if it is supported, contact your Oracle Corporation support representative.
For information about hardware certified for Oracle VM, see the Hardware Certification List (HCL) for
Oracle Linux and Oracle VM at: https://linux.oracle.com/hardware-certifications.
136