Professional Documents
Culture Documents
Lubricant Additives Packages Guide 2015
Lubricant Additives Packages Guide 2015
Selection Guide
Typical values only, may deviate from tested value of individual lot.
Irganox® ML 811 0.71 – 0.95 10.0 10.0 10.0 1.0 10.0 – 1.1 2.0 40 / nd
Irganox ML 840 0.41 10.0 10.0 10.0 1.0 3.0 – 0.5 2.2 22 / nd
Irgalube® 2030 A** 0.43 5.0 5.0 5.0 3.0 5.0 – – 3.8 10 / nd
Irgalube 2030 C** 0.42 5.0 5.0 5.0 0.5 5.0 – – 4.2 17 / nd
Irgalube 2040 A 0.45 5.0 5.0 5.0 5.0 5.0 – 0.3 3.7 nd / nd
Irgalube ML 3010 A 0.55 10.0 10.0 10.0 1.0 10.0 5.4 3.2 1.7 25 / nd
Irgalube 5010 0.55 10.0 5.0 3.0 1.0 10.0 1.8 2.7 1.9 26 / nd
Irgalube 8080 0.4 – 0.6 5.0 5.0 5.0 5.0 5.0 5.1 3.8 1.1 32 / nd
Irgalube ML 601 0.4 – 0.6 5.0 3.0 3.0 1.0 0.5 1.5 1.0 2.7 38 / nd
Irgalube ML 605 A 0.8 10.0 10.0 10.0 1.0 3.0 20.8 0.4 5.2 18 / 25
1 All values in this table are typical values only * nd = not determined; values rounded to avoid decimals
2 Typical for lubricants ** Top-treat with Irgalube 353 to achieve appropriate FZG
Irgalube 2030 C + Irgalube 353
Irgalube 2030 A + Irgalube 353
contractual quality of the product or a part of BASFʼs terms and conditions of sale. Because many factors may affect processing or application/use of the product, BASF recommends that the reader carry out its own investigations
Specification Package Crosstable
without prior information. The descriptions, designs, data, and information furnished by BASF hereunder are given gratis and BASF assumes no obligation or liability for the descriptions, designs, data or information given or results
No warranties of any kind, either expressed or implied, including, but not limited to, warranties of merchantability or fitness for a particular purpose, are made regarding products described or designs, data or information set forth
herein, or that the products, descriptions, designs, data or information may be used without infringing the intellectual property rights of others. Any descriptions, designs, data and information given in this publication may change
The descriptions, designs, data and information contained herein are presented in good faith, and are based on BASF’s current knowledge and experience. They are provided for guidance only, and do not constitute the agreed
and tests to determine the suitability of a product for its particular purpose prior to use. It is the responsibility of the recipient of product to ensure that any proprietary rights and existing laws and legislation are observed.
Irgalube ML 3010 A
Irgalube ML 605 A
Irgalube ML 601
S = recommended (may need to be tested using appropriate base oil and
Irgalube 2030 C
Irgalube 2030 A
Irgalube 2040 A
Irganox ML 811
Irganox ML 820
Irganox ML 840
Irgalube 5010
auxillary additives such as VII, PPD, AF, DM, etc.)
For additional information, please refer to the corresponding Technical Data Sheets
or consult with your BASF representative.
obtained, all such being given and accepted at the reader’s risk. (08/2015)
AWHF AFNOR NFE 48603 (HM = HLP; please refer to DIN 51524) S
AWHF ISO ISO 11158 (please refer to DIN 51524) S
R&O oil Cincinnati Machine P-39 S S S S S S S S S S S
R&O oil Morgan Worchester Advanced Lubricant S S S S S S S S S S S
R&O oil Morgan Worchester Standard Lubricant S S S S S S S S S S S
R&O oil GM LS-01/02/03-1-97 S S S S S S S
R&O oil DIN DIN 51517 Part 1/2 (C/CL) S S S S S S S S S S S
R&O oil ANSI/AGMA ANSI/AGMA 9005-D94 (R&O grades) S S S S S S S S S S S S
R&O oil SEB SEB 181 225 S S S S S S S S S S S S
PMO Voith Sulzer VN 108 S S S S S S
PMO Metso Paper Metso Paper S S S
® = reg. trademark of BASF SE
Email: [email protected]
Internet: www.basf.com/lubes