Professional Documents
Culture Documents
Ancra Aircraft-Catalog403
Ancra Aircraft-Catalog403
Aircraft Interiors
Specialty Hardware
N U M B E R O N E B Y D E S I G N
Ancra Quality
A Fitting Tradition
Since 1969, Ancra International has built a tradition of designing and manufacturing
aircraft components and assemblies that set new standards in engineering,
efficiency, and performance. Now four decades
later, the name Ancra is known for world-class
design, quality materials and attention to customer
requirements. This commitment to excellence
has produced 75 domestic and foreign patents,
51 product trademarks, more than 75 FAA
Supplemental Type Certificates (STCs), and
proprietary engineering software.
Made to Last
In production, an Ancra part is monitored through the AS9100 Quality
Management system, the highest achievable quality system for aerospace and
aviation companies, and the FAA Production Certificate, number 721NM. Each
Ancra product is made by a dedicated workforce of industry veterans in 70,000
square-feet of manufacturing space, including 5,000 square feet of integrated
machining capabilities and a 30,000 square foot machine center in Ensenada,
Mexico. Made from parts and materials selected for performance and durability to
offer our customers the most cost-effective and reliable solutions, our products
are put to the test for performance, durability and reliability.
TABLE OF CONTENTS
Seat Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specialty Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Warranty Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
IMPORTANT
Proprietary rights owned by Ancra International LLC are included in the information contained in this catalog. By accepting it, you are agreeing
not to reproduce all or part of this catalog, transfer the information to other documents, or use or disclose information in this catalog to others
for manufacturing, technical or any other purpose without the express written permission of Ancra International LLC.
ANCHOR PLATES & TRACK
Anchor Plates
& Track
The load stops here, stays here.
Ancra seat tracks are structural members
Anchor Plates — For use with single stud cargo fittings only. Attachment point for nets and tie downs.
Its smooth, low profile design provides protection from damage to cargo and baggage. Fittings secure
easily into these plates.
1.00
12 FT
40456-10-144 Medium Duty Aircraft Track
40456-11-144 Medium Duty Aircraft Track 1.000 1.000
Finish: -10 Clear anodized per MIL-A-8625, Type II, Class 1
-11 Unanodized
Standard Length: 12'
Load Capacity: 4,500 lbs. vertical
Weight: .40 lb/ft.
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 3
PANEL & STANCHION FITTINGS
1.125
FOR HEAVY
.36
DUTY TRACK
.16
.38
4 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
PANEL & STANCHION FITTINGS
2.10
2.43
.36
.38
Threaded Double Studs — This series of fittings provides track attachment capabilities for a wide
range of interior applications. The threaded stud is installed into the item to be mounted, and held in
position with a locknut and retainer. Offset configurations are available for those applications where
floor attachment space is restricted. Other sizes, finishes and variations may be available on special
request and may be subject to minimum quantities.
40361-23 40361-156
.230
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 5
PANEL & STANCHION FITTINGS
E
B
G
A
H
Standard Configuration
Standard Configuraon
Dash No. A B C E dia. G H Weight
-10 1.15 0.62 - 1.00 0.25 0.36 0.15
-11 1.97 0.62 - 1.00 0.25 0.36 0.15
-12 1.67 0.62 - 1.00 0.25 0.36 0.15
40191-10 Threaded Stud, Standard Configuration
-13 1.43 0.62 - 1.00 0.25 0.36 0.15
40191-11 Threaded Stud, Standard Configuration -15 1.25 0.81 - 1.00 0.15 0.26 0.10
40191-12 Threaded Stud, Standard Configuration -18 1.67 0.62 - 1.00 0.15 0.26 0.20
40191-13 Threaded Stud, Standard Configuration
-22 2.76 2.44 Min - 1.00 0.25 0.36 0.15
40191-15 Threaded Stud, Standard Configuration
40191-18 Threaded Stud, Standard Configuration -27 2.44 2.13 - 1.00 0.15 0.26 0.13
40191-22 Threaded Stud, Standard Configuration -29 1.43 1.12 - 1.00 0.15 0.26 0.11
40191-27 Threaded Stud, Standard Configuration
40191-29 Threaded Stud, Standard Configuration
The body is one-piece steel forging, heat treated and cadmium plated. The retainer is alloy steel.
Finish: Cadmium plated per AMS-QQ-P-416, Type II, Class 3, Gold Chromate and baked.
Load Capacity: 6,500 lb tension and shear.
Weight: See Table
C
B
G A E
H
Offset Configuration
Offset Configuraon
Dash No. A B C E dia. G H Weight
-14 1.43 0.62 0.55 1.31 0.25 0.36 0.16
The body is inertia welded steel forging, heat treated and cadmium plated. The retainer is alloy steel.
Finish: Cadmium plated per AMS-QQ-P-416, Type II, Class 3, Gold Chromate and baked.
Load Capacity: 6,500 lb tension and shear.
Weight: See Table
6 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
PANEL & STANCHION FITTINGS
Threaded Base, Flush — These low profile fittings are designed for use where added clearance
is required.
FWD
.50
42182-10 42182-50 1.57
Cam
“Hookle”
FWD
.50
1.55
44413-10
3.50
2.50
1.00
.50
5/16-24UNF-3B
LOCKING INSERT
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 7
SEAT ATTACHMENTS
Seat Attachments
Made to last
From initial customer specs through design,
engineering, testing and final production,
Ancra engineers direct each step to assure
the final delivered product will meet operational
criteria and will perform as desired in a variety
of conditions and environments. If it carries
the Ancra name, you know it’s right.
Quick Connect Seat Attachment Fittings — Designed to quickly attach seat legs to track and meet
airframe manufacturers’ specifications and passenger seat manufacturers requirements. Available for
both front and rear seat leg applications. Current models feature anti-rattle mechanisms satisfying
requirements of present aircraft.
2.00
.50 1.25
.475
.51
.375
49636-10
1.26
2.00
.50
1.25
Ø.31
.25
1.25
.38 .51
.90
49636-12
.38 1.26
8 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
SEAT ATTACHMENTS
45° - 53°
1.8 MIN
1.45
1.04
Seat Fitting, Front Leg — Our most popular fittings. Other styles
and variations may be available upon special request and subject
to minimums.
-11: 1/4-28UNF-2A
-12: 5/16-24UNF-2A
HEX NUT WHEEL
1.03
.25 Ø1.38
.88
.55 Ø.73
43061-11
1/4-28UNF-3A
Ø1.25
.125
1.00
.
43061-12
Ø.73
43061-11 Front Leg Seat Fitting w/hex nut)
43061-12 Front Leg Seat Fitting w/wheel 43021-12 Front Leg Seat Fitting w/wheel
Finish: Studs are cadmium plated per QQ-P-416, Type II, Class 2 and baked. Finish: Studs and Locking wheel are zinc nickel
Hex nuts and locking wheels are black teflon coated. plated. Locking wheel is gray teflon coated.
Weight: -11: .08 lb, -12: .09 lb Load Capacity: 3,500 lb
Weight: .07 lb
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 9
SEAT ATTACHMENTS
Seat Fitting, Rear Leg — Our most popular rear seat leg fittings. Other styles and variations may be
available upon special request and subject to minimums.
Ø.32 .63
53° 47413-50 Rear Leg Seat Fitting
Finish: Black epoxy paint with painted light
blue or yellow stripe. Stripe visually aids to
show plunger in up or down position.
Load Capacity: 12,000 lb in direction
1.06 1.42 shown in illustration.
Weight: .26 lb
1.74 .94
(PLUNGER)
.68
45°-53°
47886-13 Rear Leg Seat Fitting
Finish: Body is cadmium plated with black
teflon coating and locking assemblies are
cadmium plated.
1.14
Load Capacity: 11,200 lb in direction
shown in illustration.
Weight: .27 lb
1.89 .75
10 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
SEAT ATTACHMENTS
.95
.35
45°-53°
.92
.78
2.75
.71
.21 40566-14 Rear Leg Seat Fitting
56°
Meets requirements of FAR 25 and
FAR 37 TSO-C39
1.37 Finish: Cadmium plated
Load Capacity: 9,700 lb at 56°
angle as shown.
Weight: .27 lb
2.54
.81
42854-11 Rear Leg Seat Fitting
.187 Finish: Cadmium plated per AMS-QQ-
.98 1.27 .177 P-416, Type II, Class 3 with teflon coating
Load Capacity: 8,000 lb at 48° angle
from horizontal as shown.
.77 Weight: .24 lb
2.40 .297
.75-.74
1.39
44585-10 Rear Leg Seat Fitting
.975 Finish: Black teflon coated body
Load Capacity: 5,000 lb any direction
1.20 Weight: .25 lb
2.16
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 11
SEAT ATTACHMENTS
1.74 .94
49694-10 Rear Leg Ancra Lite Seat Fitting Designed to function with MS 33601 Heavy Duty Seat Track or equivalent.
49694-11 Rear Leg Ancra Lite Seat Fitting Finish: Zinc-Nickel alloy plated per AMS 2417, Type II, with Trivalent chromate topcoat.
Meets “Green Airplane” requirements for environmentally friendly material.
Load Capacity: 11,200 lb in direction shown in illustration.
Meets 16G Forward Crash Load Requirement
Weight: -10: .12 lb, -11: .35 lb
Ø.378
.50
45°
1.45
1.04
49694-10
1.00 .85
2.74
Ø.378
.50
45°
1.45
1.04
.75 .85
2.59
49694-11
12 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
SPECIALTY HARDWARE
Specialty Hardware
Engineered to perform
Ancra uses advanced tools like the
CATIA solid modeling and NASTRAN Finite
Element Modeling to develop faster, more
efficient solutions for cargo securement.
In addition, proprietary load analysis software
simulates applied loads for various configura-
tions and conditions. Ancra is Number One
by design.
Seat Belt Shackles — Ancra’s line of seat belt shackles Medivac Restraint — This Stanchion
are designed to incorporate low profile design with today’s Mount Litter Support Bracket is designed
generation of new lightweight seats. These center pivoting to support standard military type hospital
shackles are made of stainless steel and are available in litters and quickly adjusts to various
flat and 15° bend. A 20° bend shackle is available upon heights as required. Although originally
request and may be subject to minimum production runs. designed for aircraft applications, this
bracket can also be installed in personnel
tanks, ambulances and troop ships.
The adjustment feature allows for varying
density requirements in air evacuation and
also permits litters to be tilted when required.
41713-10
41713-32
.26
1.09
.140 2.08
.45
41713-10 Seat Belt Shackle, Flat 4 .63
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 13
NETS & STRAPS
Custom Nets — Nets for various applications are available upon special request. Below is an example
of a custom buffer net assembly to separate and protect troops from cargo and equipment in an A400
military transport aircraft and a net assembly for a regional jet to restrain baggage. Let our team custom
design and build a net to meet your demanding requirements.
14 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
NETS & STRAPS
Custom Restraint Straps — Cargo restraint strap assemblies can be designed and fabricated for securing
cargo typical for commercial aircraft use. Tie down arrangements are custom designed in order to safely
support cargo on pallets in compliance with TSO; mandatory with no exceptions for all aircraft restraint strap
assemblies starting with January 2016. Available with a choice of overcenter (70059) or ratchet (70060)
buckle and with either snap hooks (-10 configuration) or double stud ISO fittings (-11 configuration).
10 CONFIGURATION
24 FT MAX 16 IN
6 FT MIN 24 FT MAX
6 FT MIN
70059-10-XX-XX 70059-11-XX-XX
70059-10 1-3/4" Overcenter TSO Strap w/Snap Hooks Load Capacity: 6,000 lb
70059-11 1-3/4" Overcenter TSO Strap w/Double Stud Fittings Load Limit: 4,000 lb
Complies with FAA TSO C172 and SAE AS5385 Rev C. Weight: Varies by end hardware and length
16 IN
24 FT MAX 24 FT MAX
6 FT MIN 6 FT MIN
70060-10-XX-XX 70060-11-XX-XX
70060-10 1-3/4" Ratcheting TSO Strap w/Snap Hooks Load Capacity: 6,000 lb
70060-11 1-3/4" Ratcheting TSO Strap w/Double Stud Fittings Load Limit: 4,000 lb
Complies with FAA TSO C172 and SAE AS5385 Rev C. Weight: Varies by end hardware and length
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 15
TIE DOWN & NET HARDWARE
Overcenter Buckle — This unique 1" buckle features both simplicity and easy operation. Tension is
applied by pulling web handhold and rotating lever. The lever is self-closing and will automatically rotate to
full closed, detent position. Release is accomplished by pulling upward on the web handhold. The bottom
surface is cushioned by the webbing. Meets FAA requirements for use on straps and nets.
3.85
Hooks — Used in a variety of strap and net applications for securing cargo.
1.13 .25
2.00
1.25
44192-12 Flat Hook w/keeper 48559-10 Wire Hook, Narrow, NAS 1211D10
Finish: Zinc plated and meets RoHS & “Green Airplane” Material: .25" diameter high strength steel wire
requirements for environmentally friendly materials. Finish: Cadmium plated per AMS-QQ-P-416, Type II,
Load Capacity: 3,000 lb Class 3, Gold Chromate
Weight: .14 lb Load Capacity: 3,000 lb
Weight: .10 lb
16 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
TIE DOWN & NET HARDWARE
Rings — Used in a variety of tie down strap and net applications. Other sizes and styles may
be available on special request and subject to minimums.
1.09 .187
Ø.25
Ring Fittings — Are available in a variety of styles and sizes. Shown are only a few designs that are
available. Others may be available upon request and may be subject to minimums.
Swivel Fittings
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 17
TIE DOWN & NET HARDWARE
Breakaway Fittings — These fittings are desirable in some strap assemblies to eliminate the need for an
additional buckle. Tensioning of straps is accomplished by pulling the handhold. The fitting is released by
lifting the spring-loaded retainer and sliding the fitting free of the track. Sideplates, stud, and cross pins are
heat treated alloy steel and cadmium plated. Retainers are heat treated cast steel. Other styles may be
available on special request and may be subject to minimums.
LOAD
ADJUST 1.09
1.06
2.62 3.12
1.44 .96
40041-10
40041-26
1.06
1.12
3.01
2.65
40041-55
40041-58
18 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
TIE DOWN & NET HARDWARE
Single Stud Cargo Fittings — These fittings are normally used in strap and net applications to
attach to track and anchor plates. Fits aircraft seat track with the track cross section per MS33601,
narrow profile aircraft track and 40000 anchor plates. The fitting is easily inserted into and removed
from the track by simply lifting the spring-loaded retainer and sliding the fitting in the track. Studs are
heat treated steel alloy, retainers are cast steel, rings and springs are stainless steel. Other styles
may be available on special request and may be subject to minimums.
-21 1.09
-22 1.59
-23 2.09
1.25
-20: 1.87 - -21: 2.00
-20 Ø1.12 Ø1.12 -24: Xz -22: 2.00
-24 Ø1.38 - Ø1.38 -23: 2.00
Single Stud Locking Cargo Fittings — These fittings are the same as the single stud fittings above,
but have a locking mechanism for added security. Other styles may be available on special request
and may be subject to minimums.
Ø1.38
CABLE ASSY:
-12 ONLY
2.36
42546-10 42546-12
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 19
TIE DOWN & NET HARDWARE
4,000 LB
Ø1.38
3,000 LB
2.37
2,000 LB
.64
2.38 Ø.76
Double Stud Cargo Fittings — Double stud fittings for use in strap, net or bulk cargo restraint applications.
Fittings attach to standard and heavy duty aircraft track or pallet edge rails. Easily removed by lifting the
spring loaded retainer and sliding the fitting in the track. Bodies are forged 4130 steel and plungers are high
strength malleable cast steel and rings are high carbon steel. Other styles and variations may be available
on special request and may be subject to minimum quantity requirements.
Ø1.75
Ø.31
2.34
Ø1.56
3.76 Ø.27
20 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
TIE DOWN & NET HARDWARE
Adjustable Snap Latch — Can be used in some applications to eliminate the need for an
additional tensioning buckle. Designed for use with one inch webbing. Tensioning of the
strap is accomplished by pulling the handhold.
Ø.31
2.53
.37 OPENING
LOAD STRAP
1.34 1.06 .67 1.09
HAND HOLD
Footman’s Loop — Used in a variety of light duty tie down applications on straps and nets.
Ø.219 THRU
82° X Ø.390
.49
1.00
.25 2.50
WARRANTY STATEMENT
All Ancra International LLC products, unless otherwise indicated, are warranted to be free from
defect in material or workmanship for a period of three (3) months from date of shipment. During
this period, Ancra International LLC will, at its option, repair or replace without charge any products
or part thereof found to be defective in material or workmanship. This warranty does not extend to
any product which has been subject to misuse, abuse, negligence, accident, alteration or repair.
Ancra International LLC agrees to repair at its factory, or duplicate F.O.B. its works, any part of
its own manufacture proving defective from faulty workmanship or material, within three months
from date of shipment. Provided written notice is given immediately upon the discovery of such
defect and the defective part is promptly returned to the place of manufacture, all carrying charges
prepaid. Outside purchased equipment and accessories are guaranteed only to the extent that the
Company recovers under the original manufacturer’s guarantee. The Company shall not be held
liable for any contingent damages or delays caused by defective material and will make no
allowance for repairs or alterations made without its written consent.
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 21
AIRCRAFT INTERIORS SPECIALTY HARDWARE
22 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
AIRCRAFT INTERIORS SPECIALTY HARDWARE
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 23
AIRCRAFT INTERIORS SPECIALTY HARDWARE
24 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
AIRCRAFT INTERIORS SPECIALTY HARDWARE
A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E 25
AIRCRAFT INTERIORS SPECIALTY HARDWARE
Notes
26 A N C R A I N T E R N AT I O N A L • A I R C R A F T I N T E R I O R S S P E C I A LT Y H A R D WA R E
Ancra International LLC
Headquarters
875 W. 8th Street
Azusa, CA 91702-2247
Toll Free: +1 (800) 973-5092
Main Phone: +1 (626) 765-4800
Fax: +1 (626) 657-2213
Customer Service
Email: [email protected]
Please visit us at www.ancra.com
D I S T R I B U T E D B Y :
Catalog 403
N U M B E R O N E B Y D E S I G N