Professional Documents
Culture Documents
Bitumen Impregnated Board
Bitumen Impregnated Board
Description The SIKA Expansion Joint Filler Board is designed as a low cost, preformed
Expansion Joint Filler Board for joints in concrete highways, paving curbs, gutter,
floors and in all concrete buildings and brick structures. It is manufactured from
high grade wood fibres which are bitumen impregnated and compounded into a
compressible non extruding board. Its compressibility and resilience enables it to
perform under pressure, and recovers to more than 75% of its original dimension
when pressure is removed.
Uses n The SIKA Expansion Joint Filler is installed against existing concrete at columns
and against adjacent structures or flat work before the placement of the
subsequent concrete.
n For floors, pavings and runways it is installed ½ “ below the elevation of the
concrete surface when the joint is to be filled later to the surface elevation with a
proper sealant.
n If using a polysulphide type sealant, use a masking tape (polyethylene tape) to
separate the expansion joint filler from the sealant.
Physical Properties Sika Expansion Joint Filler conforms with the physical requirements of:
n ANSI/ASTM D 1751-73/ D-545-77 Specification for Concrete Paving and
Structural Construction (Non Extruding and Resilient Bituminous Type).
n U.K. Department of Transport: Spec. for Roads & Bridges Work Clause 2630
n Property Services Agency: Airfield Branch Spec. Clauses for Airfield Pavement
Works, Clause 3.1.05
n We can supply the boards with 10% or 20% Bitumen content plus 20% Bitumen
base boards with additional Bitumen one side. (Our standard boards contain a
Bitumen content of 20%) Application
Bitumen Impregnated Board 1/1
Characteristics / n Withstand repeated cycles of expansion and compression without extruding
Advantages n Recovery to min. 75% thickness after compression
n Virtually unaffected by temperature changes
n Low moisture absorption
n Durable and easy to handle
Sizes Standard sheet sizes:
• 7 ft. x 4 ft. (for container shipment)
Standard thickness:
• 12.5 mm
• 19 mm
• 25 mm
The information, and, in particular, the recommendations relating to the application and end-use of Sika
products, are given in good faith based on Sika’s current knowledge and experience of the products when
Legal Notice properly stored, handled and applied under normal conditions in accordance with Sika’s recommendations.
In practice, the differences in materials, substrates and actual site conditions are such that no warranty
in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal
relationship whatsoever, can be inferred either from this information, or from any written recommendations,
or from any other advice offered. The user of the product must test the product’s suitability for the intended
application and purpose. Sika reserves the right to change the properties of its products. The proprietary
rights of third parties must be observed. All orders are accepted subject to our current terms of sale and
delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product
concerned, copies of which will be supplied on request.
Construction