Professional Documents
Culture Documents
Plate & Frame Filter Press
Plate & Frame Filter Press
DESCRIPTION: -
Pressure filter can apply a large pressure differential across the
which solids may collect. The plates are covered with a filter
behind. Plates and frames sit vertically in a metal rack, with cloth covering the face of each plate, and
are squeezed tightly together by, screw. Slurry enters at one end of the assembly of plates and frame. It
passes through a channel running lengthwise through one corner of assembly. The setup consists of 7
plates and 6 frames. Frames are covered with filter cloth. Feed is fed b gear pump at the top and filtrate
collected at the bottom from each plate by operating with cock. After removing Cake, washing and
cleaning can be done by water provided by overhead tank. Inlet & outlet pressures are measured by
EXPERIMENTS:-
UTILITIES: -
TECHNICAL SPECIFICATIONS: -
Frame 6 Nos.
Plates 7 Nos.
Material Acrylic
Slurry Tank Agitator SS Impeller with SS Shaft coupled to FHP Standard make
Slurry Feed Pump Gear Pump with FHP Standard make Motor
A good quality painted rigid MS Structure is provided to support all the parts.