29616-Non Standard Jobs Uses
29616-Non Standard Jobs Uses
Business Scenarios
Non-standard discrete jobs are very flexible and can be used to control a wide variety of
manufacturing activities. The following sections provide various business scenarios that
explain how non-standard discrete jobs can be used to manage rework, field service
repairs, upgrades, disassembly, maintenance, and engineering prototypes.
Rework Assemblies
Business Example
You are a chair manufacturer that has rejected a lot of 100 completed chairs due to an
overly glossy finish. You have decided to rework these chairs on a non-standard
discrete job.
Assumptions
You have 100 rejected chair assemblies in a non-nettable Material Review Board (MRB)
subinventory.
Since this type of rework occurs frequently, your manufacturing engineers have already
defined standard rework operations for stripping, sanding, repainting, and reinspection
with appropriate resources.
Setup
Use the Discrete Jobs window to define a non-standard discrete job for the chair
assembly with a job quantity of 100. Since it is highly likely that you will be 100%
successful in reworking the chairs, enter 100 in the MRP Net Quantity field. Select an
asset type non-standard accounting class since you are building up an asset.
Use the Operations window to manually create a routing for the stripping, sanding,
repainting, and reinspection operations needed.
Use the Material Requirements window to manually create the only component
requirement (the chair assembly) at the stripping operation. Enter Push as the supply
Type since you will likely push the assembly to the stripping operation, and specify the
supply subinventory as the MRB subinventory. Do not check MRP Net if you do not want
to create demand for items that are supplied from a non-nettable subinventory.
Print the Discrete Job Pick List Report and release the job using the Discrete Jobs
window. Or release the job and use the Component Pick Release window to select
requirements and generate move orders.
Transactions
Use the WIP Material Transactions window to issue the chair assembly to the non-
standard discrete job. Use the Move Transactions window to move the chairs from
operation to operation and to charge resources and overhead.
Use the Completion Transactions window to complete the perfectly finished chairs into a
nettable finished goods inventory.
Costing
When all the chairs are completed, the job status changes to Complete. Your cost
accountants can run a Discrete Job Value Report to check all the charges.
The job must have an ending balance equal to the cost of the resource and overhead
charges only. The material charges for the chair assemblies net to a zero balance
because the only material on the job was the chair assemblies that you issued to and
completed from the job. Ending resource and overhead charge balances are written off
as a variance when you close the job.
Upgrade Assemblies
Business Example
You are a computer manufacturer that wants to upgrade some printed circuit boards
from an older revision to the now current revision. You have decided to upgrade these
assemblies from revision A to revision C on a non-standard discrete job.
Assumptions
You have 100 revision A printed circuit board assemblies in a non-nettable spare parts
subinventory. From past upgrade efforts, your manufacturing engineers expect 90%
success in the upgrade.
For this upgrade effort, your manufacturing engineers have defined an alternate bill of
material for the revision C of the printed circuit board. This alternate bill, named
UpgradeToC, includes all the items that are required for revision C that are not in
revision A. In other words, this alternate bill is the upgrade kit.
Since upgrades such as this occur frequently, your manufacturing engineers have
defined an alternate routing, named Upgrade. This routing includes all the standard
printed circuit board upgrade operations including remove, replace, test1, and test2.
Setup
Use the Discrete Jobs window to define a non-standard discrete job for revision C of the
printed circuit board assembly with a job quantity of 100. Since you expect that 90%
success when the rework is complete, enter 90 in the MRP Net Quantity field rather
than the job quantity. Select an asset type non-standard accounting class since you are
building up an asset.
Enter the printed circuit board and the Upgrade alternate routing into the Routing
Reference and Alternate Routing fields respectively to schedule the start and end dates
of the job and to create the WIP operations and resources. Enter the printed circuit
board assembly and the UpgradeToC alternate bill in the Bill Reference and Alternate
Bill fields respectively in order to get the upgrade kit components onto the non-standard
discrete job.
Use the Material Requirements window to manually create the component requirement
for the printed circuit board. The printed circuit board will likely be a push component at
the remove operation. For the printed circuit board, do not check MRP Net since you do
not want to create demand for items that are supplied from a non-nettable
subinventory. Since the upgrade kit components are supplied from nettable
subinventories, check MRP Net for these items.
Print the Discrete Job Pick List Report and release the job using the Discrete Jobs
window. Or release the job and use the Component Pick Release window to select
requirements and generate move orders.
Transactions
Use the WIP Material Transactions window to issue the printed circuit board and
upgrade kit components to the non-standard discrete job.
Use the Move Transactions window to move the printed circuit boards from operation to
operation and to charge resources and overheads. You can also use the Move
Transactions window to scrap unfixable printed circuit boards.
Use the Completion Transactions window to complete the finished Revision C printed
circuit boards into a nettable finished goods inventory.
Costing
When all the printed circuit boards are completed or scrapped, the job status changes
to Complete. Your cost accountants can run a Discrete Job Value Report to check all the
charges.
The job must have costs incurred equal to the standard cost of the printed circuit board
assemblies, plus the cost of the upgrade kit material, plus the standard or actual cost of
resources charged, and the standard cost of overhead charged. The costs relieved from
the job equal the standard cost of the completed and scrapped printed circuit board
assemblies. The balance is written off as a variance when you close the job.
Disassemble Assemblies
Business Example
You are a custom bicycle manufacturer that has received a cancellation for a custom
bike you have recently completed. You have decided to disassemble this bike into its
major components so that you can reuse these components on future custom orders.
Use a non-standard discrete job to disassemble the bike.
Assumptions
You have one completed custom bicycle in a nettable finished goods (FGI)
subinventory. Your manufacturing engineers have set up a standard operation to
disassemble bicycles, called Disassembly, with a single direct charge resource, called
Tech1.
Setup
Use the Discrete Jobs window to define a non-standard discrete job for the bicycle
assembly with a job quantity of 1. Since you will not be receiving any finished bicycles
as a supply, enter zero in the MRP Net Quantity field rather than the job quantity.
Select an expense type non-standard accounting class since you are not building up
WIP assets. Use a class with accounts that correspond to the appropriate expense
accruals.
Use the Operations window to manually create a single operation routing with the
Disassembly standard operation as the only operation.
Further, you must create negative component requirements for each of the major
components you expect to return to inventory from the bicycle including the frame,
seat, handlebars, crank set, wheels, and tires. For these components, check MRP Net so
that the MRP planning process sees these negative demands as supply.
Print the Discrete Job Pick List Report and release the job using the Discrete Jobs
window. Or release the job and use the Component Pick Release window to select
requirements and generate move orders.
Transactions
Use the WIP Material Transactions window to issue the bicycle to the non-standard
discrete job.
Use the Resource Transactions window to charge resource time incurred during the
dismantling process.
Use the WIP Material Transactions window to return the frame, seat, wheels, and so on
to inventory as you dismantle the bicycle. These return transactions fill the negative
requirements you created using the Update Requirements window. Do not use the
Completion Transactions window since there is nothing to complete.
Costing
When the disassembly process is over and all the components have been returned to
inventory, you must change the job status to Cancelled-no charges. The cost
accountants can run a Discrete Job Value Report to check all the charges.
The job must have an ending balance equal to the resource and overhead costs
incurred during assembly and disassembly and any outside processing costs incurred
during assembly. The costs of materials issued and returned must be equal since all the
components of the bicycle were returned to inventory. The resource, overhead, and
outside processing costs are written off as a variance when you close the job or at
period end when expense type non-standard jobs are automatically expensed.
Assumptions
Your manufacturing engineers have used engineering change orders to define a future
open bill of material for the fuel filters with a revision identifier of 95 and revision date
of 01-Jan. You can build the 95 revision in the regular fuel filter production area on a
standard fuel filter routing. The engineers may modify the routing on the fly during the
build process. Cost accounting has not performed a cost rollup for this future version of
the fuel filter.
Setup
Use the Discrete Jobs window to define a non-standard discrete job for the fuel filter
assembly, revision 95 with a revision date of 01-Jan, with a job quantity of 10. Since
none of these prototypes will be available as supply, enter zero in the MRP Net Quantity
field rather than the job quantity. Select an expense type non-standard accounting class
since you are performing engineering activities. Use a class with accounts that
correspond to your engineering prototype expense accruals.
Enter the current routing into the Routing Reference field to schedule the start and end
dates of the job and to create the WIP operations and resources.
Enter the 95 revision with the revision date of 01-Jan into the Bill Revision and Revision
Date fields respectively to get the correct component requirements into the non-
standard discrete job. You must have the WIP:Exclude ECOs profile option set to None
to allow you to define jobs for open revisions.
Print the Discrete Job Pick List Report and release the job using the Discrete Jobs
window. Or release the job and use the Component Pick Release window to select
requirements and generate move orders.
Transactions
Use the WIP Material Transactions window to issue the components to the non-
standard discrete job.
Use the Move and Resource Transactions windows to move the fuel filters from
operation to operation and to charge resources and overheads. You can also use these
windows to add either operations or resources as needed.
Use the Completion Transactions window to complete revision 95 of the finished fuel
filters into a non-nettable engineering prototypes inventory.
Costing
When all the fuel filters are completed or scrapped, the job status changes to Complete.
Your cost accountants can run a Discrete Job Value Report to check all the charges.
The job must have an ending balance equal to the cost of material, resources and
overhead charges less the current standard cost for the completed fuel filters (since this
future version is not the current standard). The balance is written off as a variance
when you close the job or at period end when expense type non-standard jobs are
automatically expensed.
Assumptions
Your manufacturing engineers have defined a new engineering item bill of material for
the fuel filters with a revision identifier of 95A and revision date of 01-Jan. You can
build the new item in the regular fuel filter production area on a standard fuel filter
routing. The engineers modify the routing on the fly during the build process. Cost
accounting has not performed a cost rollup or a cost update for this new engineering
fuel filter.
Setup
Use the Discrete Jobs window to define a non-standard discrete job for the engineering
fuel filter assembly, revision 95A with a revision date of 01-Jan, with a job quantity of
10. Since none of these prototypes will be available as supply, enter zero in the MRP
Net Quantity field rather than the job quantity. Select an expense type non-standard
accounting class since you are performing engineering activities. Use a class with
accounts that correspond to your engineering prototype expense accruals.
Enter the standard fuel filter into the Routing Reference field to schedule the start and
end dates of the job and to create the WIP operations and resources.
Enter the 95A revision with the revision date of 01-Jan into the Bill Revision and
Revision Date fields respectively to get the correct component requirements into the
non-standard discrete job. You must have the WIP:See Engineering Items profile option
set to Yes to allow you to define jobs for engineering items.
Print the Discrete Job Pick List Report and release the job using the Discrete Jobs
window. Or release the job and use the Component Pick Release window to select
requirements and generate move orders.
Transactions
Use the WIP Material Transactions window to issue the components to the non-
standard discrete job.
Use the Move and Resource Transactions windows to move the fuel filters from
operation to operation and to charge resources and overheads. You can also use these
windows to add either operation or resources as needed.
Use the Completion Transactions window to complete revision 95A of the finished
engineering fuel filters into a non-nettable engineering prototypes inventory.
Costing
When all the fuel filters are completed or scrapped, the job status changes to Complete.
Your cost accountants can run a Discrete Job Value Report to check all the charges.
The job must have an ending balance equal to the cost of material, resources and
overhead charges. No costs were relieved from the job by the completion transaction
since the costs of the engineering fuel filter have never been rolled up or updated. The
job balance is written off as a variance when you close the job or at period end when
expense type non-standard jobs are automatically written off.
Track Other Projects
Business Example
You are a contract electronics manufacturer who can charge customers for design
services as well as production services. You have decided to track their design service
projects using non-standard discrete jobs.
Assumptions
Your manufacturing engineers have already set up a dummy item, named
Design_Project, with a number of alternate routings for various types of design
projects. In this case, Project7 is the alternate routing that most closely matches this
specific project.
You can use the Operations window to modify this standard routing to exactly match
the major tasks (operations) and responsibilities (resources) for this specific project.
Setup
Use the Discrete Jobs window to define a non-standard discrete job with no assembly
and a job quantity of zero. There is no need for an assembly since you will not be
moving or completing anything. Select an expense type non-standard accounting class
since you are performing project activities. Use a class with accounts that correspond to
your project accruals. Use the job name and description to identify the specific
customer and design contract.
Enter the Design_Project item and the Project7 alternate routing into the Routing
Reference and Alternate Routing fields respectively to create the WIP operations and
resources. Since you will not be making moves, the purpose of this routing is to serve
as a task reference list and charging point for the individuals who are performing this
project.
Print the Discrete Job Pick List Report and release the job using the Discrete Jobs
window. Or release the job and use the Component Pick Release window to select
requirements and generate move orders.
Transactions
Use the Resource Transactions window to charge resources time incurred during the life
of the project. You can charge at a standard rate or a rate based on the specifics of
your contract.
Use the Move or Resource Transactions windows, or the Operations window to modify
the operations or resources as required for this particular project.
Use the WIP Material Transactions window to issue any items that the project might
require.
Costing
Since you will do this project over several periods, you can leave this job open for as
long as you want. The job must have an ending balance equal to the material,
resource, and overhead charges incurred during any period. The cost accountants must
run a Discrete Job Value report each period to review the charges and bill the customer.
The job balance is written off as a variance when you close the job or at period end
when expense type non-standard jobs are automatically expensed.