Research Methods 2RM
Research Methods 2RM
Author: Ed Nelson
Department of Sociology M/S SS97
California State University, Fresno
Fresno, CA 93740
Email: [email protected]
Note to the Instructor: This is the second in a series of 13 exercises that were written for an
introductory research methods class. The first exercise focuses on the research design which is
your plan of action that explains how you will try to answer your research questions. Exercises
two through four focus on sampling, measurement, and data collection. The fifth exercise
discusses hypotheses and hypothesis testing. The last eight exercises focus on data analysis. In
these exercises we’re going to analyze data from one of the Monitoring the Future Surveys (i.e.,
the 2015 survey of high school seniors in the United States). This data set is part of the
collection at the Inter-university Consortium for Political and Social Research at the University
of Michigan. The data are freely available to the public and you do not have to be a member of
the Consortium to use the data. We’re going to use SDA (Survey Documentation and Analysis)
to analyze the data which is an online statistical package written by the Survey Methods Program
at UC Berkeley and is available without cost wherever one has an internet connection. A weight
variable is automatically applied to the data set so it better represents the population from which
the sample was selected. You have permission to use this exercise and to revise it to fit your
needs. Please send a copy of any revision to the author so I can see how people are using the
exercises. Included with this exercise (as separate files) are more detailed notes to the instructors
and the exercise itself. Please contact the author for additional information.
Goal of Exercise
The goal of this exercise is to provide an introduction to sampling which is an integral part of
any research design. The other elements of your research design are measurement, data
collection, and data analysis and will be discussed in future exercises.
Populations are the complete set of individuals that we want to study.[1] For example, a
population might be all the individuals that live in the United States at a particular point in
time. The U.S. does a complete enumeration of all individuals living in the United States every
ten years (i.e., each year ending in a zero). We call this a census.
Another example of a population is all high school students in the United States. The research
study that we’ll be using in these exercises is the Monitoring the Future Survey of high school
seniors in the United States that has been conducted yearly since 1975. There is a website that
will give you a lot of information about this study. Here’s a brief description from the website’s
home page.
“Monitoring the Future is an ongoing study of the behaviors, attitudes, and values of American
secondary school students, college students, and young adults. Each year, a total of
approximately 50,000 8th, 10th and 12th grade students are surveyed (12th graders since 1975,
and 8th and 10th graders since 1991). In addition, annual follow-up questionnaires are mailed to
a sample of each graduating class for a number of years after their initial participation.”
A major focus of these surveys is students’ drug use. But the surveys include a lot more
information than just drug use. The website describes the range of questions asked.
“Questions include drug use and views about drugs, delinquency and victimization, changing
roles for women, confidence in social institutions, concerns about energy and ecology, and social
and ethical attitudes.”
These are only a few of the areas that students are asked about. Other areas include, for
example, their educational goals, religion, politics, the military, race, health, and background
information.
Populations are often large and it’s too costly and time consuming to carry out a complete
enumeration. So what we do is to select a sample from the population where a sample is a subset
of the population. That’s what the Monitoring the Future Survey did. It selected a sample of all
12th graders in the United States. Students in this sample were given a questionnaire to fill out
and that became the data for the study.
There are many different ways to select samples. Probability samples are samples in which
every object in the population has a known, non-zero, chance of being in the sample (i.e., the
probability of selection). This isn’t the case for non-probability samples. An example of a non-
probability sample is an instant poll which you hear about on radio and television shows. A
show might invite you to go to a website and answer a question such as whether you favor or
oppose same-sex marriage. This is a purely volunteer sample and we have no idea of the
probability of selection.
In this exercise we’re going to focus on probability sampling. We’re going to discuss three
different types of probability samples – simple random samples, stratified random samples, and
cluster samples.
There are many ways of selecting a probability sample but the most basic type of probability
sample is a simple random sample in which everyone in the population has the same chance of
being selected in the sample. If you have a list of all the individuals in your population, it’s easy
to select a simple random sample. There is a data base (i.e., Exercise Data) provided with this
exercise. In this hypothetical population there are 100 individuals numbered 1 to 100 (i.e.,
ID). Individuals in the population are also listed by sex and whether they favor or oppose same-
sex marriage. The codebook explains what each symbol means.
To select a simple random sample, all you need to do is to follow these easy steps.
Number all the individuals from 1 to n where n is the total number of individuals in the
population. If your population consists of 100 individuals, then number them from 1 to
100. This is done for you in the data file.
Select m random numbers where m is the number of individuals in your sample. A set of
random numbers has no discernable pattern to it. There are many random number
generators on the internet. One of those generators can be found at the Stat Trek
website. All you have to do is to enter the minimum value (i.e., 1 for the example
above), the maximum number (i.e., 100), and the number of random numbers you want
(e.g., 10 if you want a sample of 10 individuals). Note that it also asks if you want to
allow duplicate entries. Most of the time you do not, so select “False.” Ignore the
“Seed” box. Click on “Calculate” to generate the random numbers.
Write down the 10 random numbers that the generator produced and label this sample 1. Now
calculate the percent of respondents in this sample that favored and opposed same-sex marriage.
Repeat this process. All you have to do is to click on “Calculate” again. Write down the 10
random numbers and label this sample 2 and calculate the percent of respondents in this sample
that favored and opposed same-sex marriage. Notice that the two samples will consist of
different individuals although there may be some overlap.
Now repeat this process again and label this sample 3 and again calculate the percent of
respondents in this sample that favored and opposed same-sex marriage.
Were the percent of respondents in the three samples that favored and opposed same-sex
marriage all the same or different? What does this tell you about sampling?
Since we can’t eliminate sampling error, what we do is try to minimize sampling error. One way
to do that is to stratify the sample. Notice that in the exercise data base 50% of the population is
male and 50% is female. When we select a simple random sample of 10 individuals from this
population, sometime the sample has 50% male and 50% female and sometimes there are more
males than females and other times there are more females than males. Go back and check the
three samples that you selected in Part 3 and calculate how many males and females there were
in each sample. Were there the same number of males and females or were there more males or
more females? You probably didn’t get exactly 50% males and 50% females in all three
samples. Although it is possible, it’s not likely.
We can stratify our sample by sex and ensure that the sample has the same percent males and
females as does the population. How would we do that? Divide the sample into two groups – all
males and all females. Since the population is 50% males and 50% females, we want our sample
to be 50% males and 50% females. For a sample of 10 individuals, that means we want our
sample to have 5 males and 5 females. That’s easy to do in our exercise data base since the 50
males are listed first (id’s 1 to 50) and the 50 females are listed next (id’s 51 to 100).
Use the same random-number generator that we used in Part 3. For the males, all you have to
do is to enter the minimum value (i.e., 1), the maximum number (i.e., 50), and the number of
random numbers you want (e.g., 5). For females, just change the minimum value to 51 and the
maximum value to 100, and leave the number of random numbers at 5.
Select three stratified random samples and write down the random numbers for each of the three
samples. Calculate how many males and females there were in each sample and write that after
the random numbers for each sample. This time there should be exactly 5 males and 5 females
in each sample. These are stratified random samples. Since we have made sure that the
population and the samples have the same proportion males and females, they are often called
proportional stratified random samples.[2]
Stratification will decrease sampling error if the variable that is used to stratify the sample is
related to what you want to estimate. In this case, we want to estimate the proportion of the
population that favor and oppose same-sex marriage (i.e., the parameter). To do that we select a
sample from the population and use the percent of the sample that favors and opposes same-sex
marriage as an estimate of the population parameter.[3] Since sex is related to how people feel
about same-sex marriage[4], sampling error will be reduced. In order to stratify a sample, the
stratifying variable must be known for each case in the population as it is in this exercise.
Notice that simple random samples and stratified random samples assume that we have a list of
the population from which to select our sample. But what if we don’t have such a list? For
example, how would we get a sample of high school seniors? There is no list available. But
there is a list of all high schools in the United States. So we could select a sample of high
schools and then within each high school in our sample select a sample of seniors. This is called
a cluster sample because high schools are the clusters where you find seniors.
This is similar to how the Monitoring the Future Survey selected its sample of high school
seniors in the United States although their sampling design is a little more complex. Information
about this study is archived at the Inter-university Consortium for Political and Social Research
(ICPSR) located at the University of Michigan. Start by going to their website. In the upper-
right corner of the home page click on “Log In/Create Account.” Scroll down and click on
“Create Account” below “New User.” Fill in the requested information and click on
“Submit.” It will create your account and give you access to the ICPSR archive. You can use
your account from anywhere you have internet access. If you don’t use your account for six
months, your account will go away.
If you are a student, faculty member or staff at a university or college that belongs to the ICPSR,
you will have access to all the archive’s data holdings. If you are not, then you will only have
access to public-use data. Fortunately, the Monitoring the Future Surveys were funded for public
access so you have access to this study regardless of your status.
Once you have created your account, click on “Find Data” in the menu bar at the top of the
screen. Then type “Monitoring the Future” in the “Find Data” box. Look through the search
results for the following. It will likely be one of the first search outcomes.
Monitoring the Future: A Continuing Study of the Lifestyles and Values of Youth, 1994
(ICPSR 6517)
Bachman, Jerald G.; Johnston, Lloyd D.; O'Malley, Patrick M.
Click on the link in the lower right for the “Monitoring the Future (MTF) Series. Scroll down a
little ways until you see “Most Recent Studies” and click on the one that says “Monitoring the
Future: A Continuing Study of American Youth (12th-Grade Survey), 2015.” That’s the survey
that we will be using in these exercises. Read through the study description to get an overview
of the research design. Under “Dataset(s)” you will see a listing for “DS1: Core Data.” Under
“Documentation” you will see a listing for “Codebook.pdf.” Click on this link to download the
codebook but do not print it out. It’s too long. Read the section called “Sampling Information”
on pages 2-3 of the codebook.
The sampling design for these surveys is a multistage cluster sample consisting of three
stages. The clusters are the high schools because that’s where you find high school
seniors. Write three paragraphs describing each of the three stages. Don’t just cut and paste or
repeat word for word what is in the codebook. Rather summarize in your own words how the
sample was selected. Show that you understand what a multistage cluster sample is.
As we discussed in Part 4, stratifying a sample is one way that you can reduce sampling
error. This assumes that the variable you are using to stratify the sample is related to whatever
you are studying. For example, if you are trying to explain why some people favor same-sex
marriage and others oppose it, then you could stratify your sample by sex. Assuming that sex is
related to how people feel about same-sex marriage (and it is), this will reduce sampling error.
Another way is to increase the sample size. The larger the sample size, the less the sampling
error. A simple random sample of 400 will have half the sampling error that a simple random
sample of 100 has. To reduce the amount of sampling error by half for a simple random sample,
you have to quadruple the sample size.
We also need to think about the effect of sampling design on sampling error. Let’s compare three
samples of size 1,000 from the same population. Sample A is a simple random sample of size
1,000. Sample B is a stratified random sample of size 1,000 where we have stratified on a
variable that is related to whatever we are trying to estimate. Sample C is a multistage cluster
sample of size 1,000. Stratification will reduce sampling error while cluster sampling will
increase sampling error. So sample C will probably have the most sampling error and sample B
will probably have the least. Sample A will probably be between the other two samples.
Cluster sampling is important because sometimes it is the only way we can get a sample when
there is no list of the population available. There’s no list of all high school seniors in the United
States but there are lists of all high schools in the United States. So we use a multistage cluster
sample. One way we can control sampling error when using cluster sampling is to select as
many clusters as we can afford. So the Monitoring the Future Survey includes a large number of
high schools and a large number of seniors per high school. That makes for a very expensive
study but it’s necessary to control sampling error.
[1] We need not limit ourselves to studying individuals. We could also study objects like
businesses or nations. So it might be better to define a population as the complete set of objects
that we want to study. But in these exercises our focus is on individuals so we’ll define a
population as the complete set of individuals we want to study.
[2] We’re not going to discuss disproportional stratified random samples in this exercise. That
would be a sample that is selected such that some segments are oversampled and other segments
are undersampled. For example, we might undersample whites and oversample non-whites so
that our sample is 50% whites and 50% non-whites. This would be useful if we wanted to
compare whites and non-whites and wanted to have a larger sample of non-whites for
comparison purposes.
[3] In this example, we can calculate the population percent since we know the values for each
person in the population. However, we real life situations, we won’t know the population
parameter.
[4] You can determine from the exercise data base that 60% of females favor same-sex marriage
compared to only 40% of males.