Professional Documents
Culture Documents
Aveva Pdms
Aveva Pdms
Issue
Customer is trying to use PDS 2011 between 2 Windows 7 (64 bits) machines.
One is configured as client and server (SQL Server database and PDS share).
The other is configured as a client. On the client machine, we get the error "53 - The
network path was not found..." when starting PD_Shell.
Environment
N/A
Resolution
With Windows 7 as the file and database server, it is necessary to Start the Windows
Remote Registry service on the Windows 7 "server", and set the Startup type to
Automatic. In Windows 7, this service is Stopped and the Startup type is set to
Manual by default.
*Registry Entries - See the PDS Setup guide for details on entry locations for 32 or 64
bit.
SOFTWARE
SOFTWARE
Microsoft
SYSTEM
This error can be caused by a firewall. In this case the Symantec Endpoint Protection
firewall caused the error. Symatec Enpoint Protection has a firewall configuration
policy that was set by their IT group. Once they removed that policy, the error
stopped.
Q> While working in Equipment Modeling the fatal error "Error retrieving
ILK" Appears.
Relevant Product(s)
Issue
Error: While working in Equipment Modeling the fatal error "Error retrieving ILK"
appears.
Environment
Reported in Version:
Resolution
On the server, Run the following string from the Command Prompt Window:
reg add
"HKLM\System\CurrentControlSet\Services\LanmanServer\Parameters" /v
DisableLeasing /t REG_DWORD /d 1 /f
https://smartsupport.intergraph.com/app/answers/detail/a_id/16171/kw/ilk
Normally, CPU is not nearly as important as I/O for database. Make sure you have a
very fast disk system and enough RAM to cache most or all of the database (which
lightens the hit on the disk for reads).
Or in other words, it won't matter if you buy the fastest CPU on earth if you don't
have fast storage.
Q>
Pdtable_103 PDS Version
4 5.4
5 6.0 to 6.1
6 6.3 to 6.4
7 7.0 to 7.1
8 7.2
10 9.0 to 10.0
11 11.0 to 12.0
Q> Import Project Retrieval fails. Error: Option Not Valid for Archived Version No.
Add the correct version number to the file will resolved the problem
2. Open lst_file.cpio a text editor and add correct PDS Version Numbering to the
second line.
Example:
PDS12
11
import.cpio
Error trying to drop schema. Schema password does not match existing password for
this user
RIS Schema Manager -> Schema Definition -> Modify Schema Password
For PDS do not put a password on the schema. Only the database username and OS
username should have passwords.
Q> Change RIS Schema Password Without Knowing Current Schema Password
connect schemadbusername/password@NetServiceAlias
commit;
The user must get out of RIS Schema Manager and log back in so that the schema will
be read again in RIS. The password should be removed
< 명령어참고>
2 FROM DBA_USERS
3 WHERE USERNAME = 'GHOST'
4 ORDER BY CREATED;
SQL>
oRDER BY CREATED;
FROM DBA_USERS
ORDER BY CREATED;
<< 해결>>
New password :
....
<< 해결>>
>>> 패스워드기본값확인쿼리
RESOURCE_NAME LIMIT
-------------------------------- ----------------------------------------
COMPOSITE_LIMIT UNLIMITED
SESSIONS_PER_USER UNLIMITED
CPU_PER_SESSION UNLIMITED
CPU_PER_CALL UNLIMITED
LOGICAL_READS_PER_SESSION UNLIMITED
LOGICAL_READS_PER_CALL UNLIMITED
IDLE_TIME UNLIMITED
CONNECT_TIME UNLIMITED
PRIVATE_SGA UNLIMITED
FAILED_LOGIN_ATTEMPTS 10
PASSWORD_LIFE_TIME UNLIMITED
RESOURCE_NAME LIMIT
-------------------------------- ----------------------------------------
PASSWORD_REUSE_TIME UNLIMITED
PASSWORD_REUSE_MAX UNLIMITED
PASSWORD_VERIFY_FUNCTION NULL
PASSWORD_LOCK_TIME 1
PASSWORD_GRACE_TIME 7
물론관리자로접속하셔야합니다.
헌데이퀴리를날려도해당유저의EXPIRY_DATE 는그대로입니다.
>>> 사용자패스워드확인퀴리
2 FROM DBA_USERS
4 ORDER BY CREATED;
이럴때는해당유저로다시접속해서패스워드를새로넣어주시면됩니다.
비밀번호입력:
ERROR:
ghost 에대한비밀번호를변경합니다.
새비밀번호:
새비밀번호다시입력:
비밀번호가변경되었습니다.
연결되었습니다.
SQL>
다시확인해보죠.
연결되었습니다.
SQL>
2 FROM DBA_USERS
4 ORDER BY CREATED;
GHOST OPEN
이제정상으로돌아왔네요. ^^
Q> 암호기한없애기(위내용)
Q> 암호대소문자구분무시
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\Administrator\product\12.1.0\dbhome_1)
(PROGRAM = extproc)
(ENVS =
"EXTPROC_DLLS=ONLY:D:\app\Administrator\product\12.1.0\dbhome_1\bin\orac
lr12.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
)
Q>
*********************************************************************
**********
**
**
* The location of the RIS schema file has not been determined. You may *
*********************************************************************
**********
SCHEMAS 를 다시 생성한다.!
Q> 자격 증명 관리
네트워크 연결 암호 자동 설정
Users cannot open models in new PDS project. The error is Write Permission Denied
*path_name and network_address values in pdtable_113 does not match actual file
location
*Write permission denied error was due to inadequate permissions to the project
*Verify the drive letter where the project is located is not shared as
driveletter$ (example D$). This is reserved for administators. Drives with PDS project
cannot have a $ share
Make sure the Windows Firewall is turned off or open the port assigned for SQL Net
(1521 by default).
*Error message when you write a file to a server from a Windows XP-based or a
Windows 2000-based computer: "" Delayed Write Failed
http://support.microsoft.com/kb/321733
http://technet.microsoft.com/en-us/library/bb490821.aspx
Q> MSSQL Error -10004, Underlying DBMS Could Not Open Database
RISMSFDS 5.6
MSSQL 2005
Log in to the DB server and make sure user can connect to the DB using SQL Server
Management Studio. Make sure this login has DBO permission for the PDS database.
Verify that the usernames are displayed under Databases > PDS > Security > Users.
Make sure that the installation of SQL Server uses the Default Instance for RIS/PDS.
If there is already a default instance (one identified by the name of the computer on
which you are install SQL Server), RIS won't be able to communicate with the SQL
Server. You can have only one default instance per computer (any other instances will
be called a named instance).
go
USE PDS
go
go
go
go
go
*No printer in the list when trying to plot clash on Citrix box
MS_UMENUPREF=c:\win32app\ingr\pdshell\menu\umenupref.rsc
MS_FONTRSC=c:\win32app\ingr\pdshell\font\pdsfont.rsc
MS_CONFIG=c:\Bentley\Program\MicroStation\config\msconfig.cfg
*The new variables were created to provide the capability to use different values
(hence, point to different files) for hard coded variables.
@rem = '
@echo off
pdsperl %0.cmd %1 %2 %3 %4 %5 %6 %7 %8 %9
goto endofperl
';
$ENV{'GRAPHICS_TOP'} = 'YES';
$ENV{'PROJ_FILE'} = 'c:\pds\\';
$ENV{'PROJ_ADDR'} = 'brewster7';
$ENV{'PDS_USER_UMENUPREF'}='c:\win32app\\ingr\\pdshell\\menu\\newpre
f.rsc';
$ENV{'PDS_USER_FONTRSC'}='c:\win32app\\ingr\\pdshell\\font\\webfont.rsc'
;
$ENV{'PDS_USER_CONFIG'}='c:\bentley\\program\\microstation\\config\\gbco
nfig.cfg';
$PD_SHELL = $ARGV[0];
$appname = "$PD_SHELL\\bin\\pdshell";
if($#ARGV>$[)
$appname=$ARGV[0].$ARGV[1];
if($#ARGV>$[+1)
shift;
shift;
{
$appname .= ' '.$argi;
system "$appname";
__END__
PDS by design has hard coded the USTN_USERNAME variable to use the
untitled.ucf file.
Note: PDS 11 and above does allow for individual msconfig.cfg files using the
PDS_USER_CONFIG variable setting in pds.cmd
Beginning with Windows 10 and Oracle 12.1.0.2, Microsoft and Oracle will enforce
the Internet Host Table Specification RFC 952 which mandates that component
hostname labels can contain only alphanumeric characters. Hostnames using
underscores ('_') are not allowed.
Recommend that user create his own grant all, below are the steps:
select 'grant all on', table_name, 'to public;' from ris5tables where table_type='T'
5. Edit the output file and delete the two heading lines at the top of the file. Insert a
line to identify the default schema from step 1
6. Start risbatch (Start -> All Programs -> RIS06.00 -> RIS Batch) and key in
read \path\grant1.sql
------------------------------------------------------------
The two buttons are enabled only when weld numbering type is set to User Defined
Weld Numbers in Revise Weld Numbering Settings
Revise Weld Numbering Settings > Toggle Weld Numbering Type and set to User
Defined Weld Numbers > Accept
TAG_NO = '32-01A'
PLACE_RDB_SPECIALTY, TAG_NO, BY CP2
The symbology in the project was set to Fluid Code and the pipecat2.txt was missing
from the project directory. To resolve the error: retrieve the file from the project
backup. It can also be copied from C:\win32app\ingr\PDSHELL\categ\ folder if it is
the same as the delivered one.
Project Administrator > Project Data Manager > Seed > Revise (on the Piping Model
Data) and then returns to the Project Data Manager screen, error: Model Seedfile
Contains Category Control Levels Set To Zero
Project Administrator - Project Data - Seed - Revise Piping Model - Level and Color.
If any of the levels are zero, change to non-zero value
By default, in the Seed Data, the max size is set to 2500 blocks (about 1.2 MB)
Change the Seed Data of the model and increase it Model Size Exceeded
Note : Increasing the Model Size will effect the load time of the model
Shut down the database and then restart the database. If there are users connected, use
a shutdown normal to avoid forcing the users out of Oracle.
Connect to SQL*Plus
$ sqlplus /nolog
Q> How can I determine my PDS database tablespace names using SQL Plus?
To use Enterprise Manager/DB Control, go through the GUI to identify the datafile
and modify it to autoextend.
If you are using the command line, first identify the datafile(s) for the tablespace in
question. Where the name USERS is in the SQL statement below, use your tablespace
name in all CAPS.
FILE_NAME
---------------------------------------------------------
D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
Then issue the following (note that the full path is in single quotes and must be used).
Database altered.
In this example the next increase is set to 1 mb and will allow unlimited file size. The
next increase size value can be set to be larger based on your need.
There is a recurring issue of a 64 bit Oracle database being shut down during the
evening. If the Oracle Service and Listener Service are restarted, everything runs okay
for a while.
The alert log shows a write error to a database file causing the database to shutdown.
That is usually an indication that a system backup is holding the file when Oracle is
trying to write to it. Check to see if the directories are included in the backup list. If so,
either exclude them or ensure that the database is shutdown while the backup is in
progress.
Q> How do you calculate the number of Oracle processes setting for PDS?
PDS users can take 5 to 8 process per user, so for10 users, up to 80 could be used. For
50 users, up to 480 process.
sqlplus /nolog
2.Open a command prompt on the Oracle database server and run the following
statement to remove the existing configuration files:
3.In the same command prompt, re-create the DB Console repository by executing the
following:
Q> Cannot find spec and table implied item in table 34 of the mto schema.
Spec and table implied items are populated into table 140, not table 34.
Q> Mapping fluid code (codelist) to description in the MTO schema.
Eample Query:
Q> Quantity of Bolts Extracted From Mto Schema Does Not Match Iso Drawing
Re-run Material Data Publisher with selecting Iso Mating Data Behavior option.
Selecting Forced Publishing of Models in the first re-run to get new data.
Pd_iso and Material Data Publisher work differently in assigning the ownership of
implied materials (bolts, gasket and weld). New option was added in version 9.00: Iso
Mating Data Behavior which tells program to assign the ownership of implied
material in the same way as pd_iso does.
You can create a batch file with the create schema command in it and then run the
command from risbatch using the following syntax:
Errors occur when a large number of RIS/PDS connection have been made to the
server.
*RIS_E_SERVER_NETWORK_ERROR (0x81949f3a)
*RIS_E_INV_OPEN_DB (0x8a948e22)
For Windows 2000, Windows XP, Windows Server 2003 and Windows 2008:
SharedSection uses the following format to specify the system and desktop heaps:
SharedSection=xxxx,yyyy,zzzz
For 32-bit operating systems, increase the yyyy value to "12288" and increase the
zzzz value to "1024".
For 64-bit operating systems, increase the yyyy value to "20480" and increase the
zzzz value to "2048" or "3072".
These errors are caused by a reduction of resources available to the Window operating
system that cause a reduction in the RAM available for the non-interactive desktop
heaps. The reduced amount does not allow RIS sufficient RAM to spawn - which
create the errors.
The computers DNS cache needs to be updated to associate the new physical machine
with the appropriate IP address. To clear your DNS cache, perform the following
steps:
Click on Windows Start and enter cmd in the Start menu search text box.
ipconfig /flushdns
PD - Project Control Data. Contains the location of all drawings and the 2D reference
data.
PID - P&ID Task Schema. Contains information specific to each 2D PID drawing.
PIDM - P&ID Master Schema. Contains information posted from the PID schema.
PFD - PFD Task Schema. Contains information specific to each 2D PFD drawing.
PFDM - PFD Master Schema. Contains information posted from the PFD schema.
Tried to add 21x11 & 11 combinations Gasket entries in PCD file, still the
Gasket is not getting generated. And the Error file also, do not show the
missing combination.
PD_Shell -> (select project) -> Project Administrator -> Project Data
Manager -> Piping Model -> AREA -> DB NAME -> Revise Model Data
-> Material Takeoff -> Gasket Search (Alternate).