Tetra & Mission Critical Solutions: Band Selective Fibre Optic Repeater
Tetra & Mission Critical Solutions: Band Selective Fibre Optic Repeater
BSF 3604
Band Selective fibre optic repeater
The BSF 3604 is a fibre optic fed the OMU and the most distant transmission. The fibre optic
TETRA repeater. The repeater is last remote unit that the OMU system is easily remotely moni-
part of a system that is fed from supports. This offers great tored and controlled by Axell
an Optical Master Unit (OMU). flexibility when providing RF Wireless effective supervision
The maximum optical loss allowed coverage in areas where it is tool, Axell Wireless Element
for is 10 dB of fibre between not possible to rely on off air Manager.
PRODUCT BENEFITS
Supports the use of WDM (Wavelength Division Multiplexing) technology resulting in a limited need
for fibres.
Remote supervision and alarm handling in the BSF 3604 is realized through the fibre connection via
the OMU unit’s modem or optional via built in modem.
The unique combination of high output power and highly linear power amplifiers ensures large
coverage with uniformly excellent signal quality.
The BSF 3604 an optionally be upgraded with a second optical transceiver module for redundant
fiber applications.
OMU Antenna
Optical
Fibre
Specifications
Frequency bands available (MHz): UL DL
380-385 390-395
385-390 395-400
410-415 420-425
415-420 425-430
450-455 460-465
455-460 465-470
Operator bandwidth 5 MHz
Duplex distance 10 MHz
Impedance 50 Ω
Output power/carrier (DL) 1 carrier: +36 dBm, 2 carriers: +33 dBm, 3-4 carriers: +30 dBm
8 carriers: +27 dBm
IP3 > +68dBm
Noise figure (UL) <6dB, 5dB typical at maximum gain
Group delay 2us max
Fibre optic loss compensation Implemented
Spurious Emissions from RF port < -36dBm
Intermodulation Products < -60dBc or < -36dBm
Optical Module Electrical Specification
Optical Wavelength Two color system Three color system Four color system
Master 1310 ± 10 nm 1310 ± 10 nm 1310 ± 10 nm
Slave 1 1550 ± 3 nm 1550 ± 3 nm 1550 ± 3 nm
Slave 2 N/A 1510 ± 3 nm 1510 ± 3 nm
Slave 3 N/A N/A 1570 ± 3 nm
Maximum optical output power +3 dBm ±2 dB
Maximum optical input power +2 dBm
Power Requirements 230 VAC 50Hz, 115 VAC 60Hz, –48 VDC
Power Consumption <100 W, typical
External connection
Local Maintenance Terminal RS232
Server Port 7/16 female
Optical Ports 1 x SC/APC female
Modem antenna connector SMA
Remote connection Via OMU or (optional) GSM, GSM-R PSTN modem or Ethernet
Mechanical Specification
Dimensions 540 X 382 X 198 mm
Enclosure Aluminium (IP65)
Weight 28 kg
Cooling Convection
Environmental Specification
EMC See compliance below
Operating Temperature - 25˚C to + 55˚C
Storage - 30˚C to + 70˚C
Humidity ETSI EN 300 019-2-4 (see compliance below)
MTBF > 100 000 hrs
Complies with R&TTE Directive including, EN 301 489-18
ETSI TS 101 789-1, EN 60 950
www.axellwireless.com