Compressive Strength of Translucent Concrete PDF
Compressive Strength of Translucent Concrete PDF
ABSTRACT
In this study, the compressive strength of translucent concrete was compared with that of conventional concrete
to find out the potential of using translucent concrete for construction of green buildings. Translucent concrete
was prepared by embedding plastic optical fibres in concrete. Concrete cubes of size 7cm x7cm x7cm were
prepared and POFs of diameter 1mm were embedded in it. Through the study, it was observed that the strength
of light transmitting concrete was similar to that of conventional concrete and can transmit sunlight passing
through it without any significant dissipation of energy, thereby saving energy of the building. It is prepared by
embedding plastic optical fibres in concrete.
I. INTRODUCTION
Energy conservation has become an important issue in today’s world. A study estimated that by 2050,
the carbon released by commercial, institutional and residential buildings will amount to 3800 tonnes
and this carbon will consume 38% of the global energy. To reduce the consumption of energy by
buildings and the upcoming construction in future, development of a new construction material which
will consume less amount of energy has attracted the attention of many researchers. Transparent
concrete is one such material. Concrete is one of the most basic materials required during all types of
construction. Transparent concrete is an innovative concrete which has the ability of letting light pass
through it.
Concrete is made transparent by embedding optical materials such as optical fibres in it. This is
because optical fibres can transmit sunlight without any heat, light or photochemical reaction. The
light gets transmitted from one end of the optical fibre to another [1-6]. Because of its light
transmitting ability translucent concrete is also known as transparent or light transmitting concrete.
Aron Losonzi was the first person to put forward the concept of transparent concrete in 2001. The first
transparent concrete block was named as LiTraCon [3].
In this study, the effect of including optical fibres on compressive strength of the concrete has been
studied. The optical fibres were added to the concrete layer by layer distributed uniformly throughout
the surface of concrete block. The compressive strength of transparent concrete block was then
compared to that of control concrete block. It was observed that the compressive strength of
transparent concrete was same as that of regular concrete.
II. MATERIALS
Concrete:
Ordinary Portland cement concrete was used for the manufacturing of concrete blocks of size
7cm*7cm*7cm. Three cubes were made, among which two cubes were of control concrete and one
was of transparent concrete. The weight of these cubes was varied, the weight of control concrete
cubes being 760 gm and 780 gm and that of transparent concrete being 750 gm.
Plastic optical fibres (POFs):
52
International Journal of Engineering Sciences & Emerging Technologies, Sept. 2015.
ISSN: 22316604 Volume 8, Issue 2, pp: 52-54 ©IJESET
POFs are long hollow cylindrical fibres which can transmit light without any significant loss of
energy. The diameter of POFs was 1mm.
53
International Journal of Engineering Sciences & Emerging Technologies, Sept. 2015.
ISSN: 22316604 Volume 8, Issue 2, pp: 52-54 ©IJESET
IV. RESULTS
Table 1. Compressive strength results
V. CONCLUSION
The study showed that the transparent concrete can reduce electricity bills without compromising with
the strength of the building. It will reduce the energy consumption of both residential and industrial
buildings. It can be used for construction of green buildings since it will save energy and will also
provide aesthetic beauty to the building.
REFRENCES
[1]. Bashbash, Basma F., et al. "Basics of Light Transmitting Concrete." Global Advanced Research Journal of
Engineering 2.3 (2013): 076-083.
[2]. Bhushan, MNV Padma, D. Johnson, and Md Afzal Basheer Pasha. "Optical Fibres in the Modeling of
Translucent Concrete Blocks." International Journal of Engineering Research and Applications 3.3 (2013):
13-17.
[3]. Cázares, Sergio Omar Galván, and Joel Sosa Gutiérrez. "Formulation for Obtaining a Translucent Concrete
Mixture." U.S. Patent Application 12/083,724.
[4]. He, Jianping, et al. "Study on smart transparent concrete product and its performances." Proc., 6th Int.
Workshop on Advanced Smart Materials and Smart Structures Technology. Harbin, China: Asian-Pacific
Network of Centers for Research in Smart Structure Technology (ANCRISST), Harbin Institute of
Technology, 2011.
[5]. Nagdive, H. R., and SHEKAR D. BHOLE. "To Evaluate Properties of Translucent concrete/Mortar &Their
Panels." International Journal of Research in Engineering & Technology 1.7 (2013): 23-30.
[6]. Salih, Shakir Ahmed, et al. "Effect of Plastic Optical Fiber on Some Properties of Translucent Concrete."
[7]. Sawant, A. B., R. V. Jugdar, and S. G. Sawant. "Light Transmitting Concrete by using Optical Fiber."
[8]. Zhou, Zhi, et al. "Research and development of plastic optical fiber based smart transparent concrete." SPIE
Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society
for Optics and Photonics, 2009.
AUTHOR
Salmabanu Luhar, Research Scholar, Department of Civil Engineering, Malaviya
National Institute of Technology, Jaipur, Rajasthan, India . She has obtained her
Diploma Degree in Civil Engineering from Govt. College, Gujarat in the year 2007,
Bachelor’s Degree in Civil Engineering from Nirma University in the year 2011 and
Master’s Degree in Computer Aided Structural Analysis & Design from Nirma
University, Ahmedabad in the year 2013. Her Research areas are Advances in
Concrete Technology, Geopolymer concrete; Self-healing Concrete. She is the
Associate Member of Institution of Engineers (India). She has 2 years of teaching experience. She has
presented many papers in National and International Journals and Conferences.
54