Scribd Logo
Upload

Welcome to Scribd!

  • 256 views

    TYT MD380 Power Change PDF

    Uploaded by

    ucnop
    This document provides instructions for reducing the transmission power level of TYT MD-380 and Retevis RT3 radios to approximately 100mW by modifying the TxLowPower value in the radios' code plug software. The instructions involve opening the setting.ini file, changing the testMode parameter, connecting the radio via programming cable, opening the additional programming window, halving the original TxLowPower value, writing the changes to the radio, and disconnecting the cable. Caution is advised as incorrect changes could render the radio unusable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content

    TYT MD380 Power Change PDF

    Uploaded by

    ucnop
    256 views1 page
    This document provides instructions for reducing the transmission power level of TYT MD-380 and Retevis RT3 radios to approximately 100mW by modifying the TxLowPower value in the radios' code plug software. The instructions involve opening the setting.ini file, changing the testMode parameter, connecting the radio via programming cable, opening the additional programming window, halving the original TxLowPower value, writing the changes to the radio, and disconnecting the cable. Caution is advised as incorrect changes could render the radio unusable.

    Original Description:

    Original Title

    TYT MD380 Power Change.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides instructions for reducing the transmission power level of TYT MD-380 and Retevis RT3 radios to approximately 100mW by modifying the TxLowPower value in the radios' code plug software. The instructions involve opening the setting.ini file, changing the testMode parameter, connecting the radio via programming cable, opening the additional programming window, halving the original TxLowPower value, writing the changes to the radio, and disconnecting the cable. Caution is advised as incorrect changes could render the radio unusable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    256 views1 page

    TYT MD380 Power Change PDF

    Uploaded by

    ucnop
    This document provides instructions for reducing the transmission power level of TYT MD-380 and Retevis RT3 radios to approximately 100mW by modifying the TxLowPower value in the radios' code plug software. The instructions involve opening the setting.ini file, changing the testMode parameter, connecting the radio via programming cable, opening the additional programming window, halving the original TxLowPower value, writing the changes to the radio, and disconnecting the cable. Caution is advised as incorrect changes could render the radio unusable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    Derating for TYT MD-380 / RETEVIS RT3 power level LOW approximately 100mW

    (for example, for operation with DV4mini stick)

    1. Go to the directory where the code plug-software is stored (for me: C:\Program Files(x86)\Tytera\MD_380\SoftWare_EN

    2. there you find the File setting.ini, open the file, select the parameter to test mode = 1 change in line 3 (orig .: testMode = 0),
    if it was not going: put (copy) the setting.ini file on desktop, modify, copy it back!

    3. Connect and turn on radio with programming cable

    4. Start CP software, and then press Ctrl-T or Strg-T, a window should open
    maybe it looks like this:

    5. focus in this window to the vertical column 5

    6. there you should looking for the value for TxLowPower (column 5) and a note the original value to possibly later restore to
    the original state.

    7. Now halve this value and submit (in my case Value 74, now 37)

    8. now restore the parameters to the device using the Write Button (IMPORTANT!)

    9. Close the window by clicking Cancel, exit CPS and remove programming cable.

    The radio should now make in position LOW Power about 100mW, the power at high power remains unaffected.
    PLEASE DON'T Change any other parameters !!!, you could make the device unusable else!

    This modification IS AT YOUR OWN RISK !!

    73

    You might also like