Technical Performance Certificate: Technical Compliance of Product
Technical Performance Certificate: Technical Compliance of Product
6-8 m /Litre
2
5 Coverage complied
(depending upon ambient temperature, humidity& nature of substrate)
5-20 Minutes
6 Open time complied
(depending upon ambient tempreture, humidity& nature of substrate)
8 VOC Level Very Low . VOC < 400 gms/litre. Conforms to LEED requirements complied
Description :
Heat Resistant one component Adhesive based on specially blended synthetic rubber .Adhesive has been specially developed for Nitrile closed cell foam
insulation system .
Recommended use :
K-Flex K-414 Glue is used for insulation of Nitriile sheet to metal, air ducts, slabs ,pipe sections .
Futures of Product :
1.Highly compatible with Nitrile Rubber
2.Excellent Fire Resistant
3.Excellent Bonding to Porous & Non porous Surfaces
4.Excellent Chemical Resistant
5.Excellent Water Resistance
6.Excellent Heat Resistant
7.UV Resistant
Application :
Apply K-FLEX K-414 GLUE with brush evenly on both the surfaces to be joined ,wait until solvent is fully evaporated (Tack dry ) before assembly. After the
eveporation of solvent ,assemble the surfaces by applying normal hand pressure .
Strorage instruction :
Shelf Life up to 16 months from the manufacturing date if unopened,stored under cover Protect from Direct sunlight & high tempreture ( > 30 Deg C) Failure
to comply with recommended storage condition may result in premature detertotration of product or packaging .
Tested By: