Professional Documents
Culture Documents
CRANEBallCatalogCV 303
CRANEBallCatalogCV 303
www.craneenergy.com
Key Features and Index
Full Material Offering: Bronze, Brass, Lead-Free Brass, Carbon Steel, and Stainless Steel
www.craneenergy.com
Overview
APPLICATIONS
CRANE® ball valves have gained wide acceptance in industrial segments for their accurate machining and strict testing
procedures ensuring that quality is built into every valve. CRANE® ball valves are specified for service in chemical plants,
petroleum refineries, pulp and paper mills, and industrial construction projects.
BODY HANDLE
CRANE® offers two-piece body style designs up to 2000# CWP.Handles on threaded and solder end valves are zinc-plated
Two-piece valves offer a larger port opening, equivalent tocarbon steel or stainless steel, covered with a protective
other competitive options. plastic sleeve with "CRANE®" imprinted on it. Handle stop is
an integral part of the handle and provides positive stop as
Two-piece valves are available in brass (600# CWP), bronze the body stop engages the handle stop. Handles are firmly
(600# CWP), Stainless Steel (CF8M)(2000# CWP) and Carbon attached to the stem with jam nuts. Special handles made
Steel (WCB)(2000# CWP). of Type 304 stainless steel may be furnished on some valves.
Other handle options are shown on Page 12.
CRANE® Offers:
2-piece Carbon Steel/Stainless Threaded to 2" TESTING
2-piece Brass valves Threaded to 4" Each valve is individually air-tested to ensure the double-block
2-piece Brass valves Soldered to 3" qualities of the seals and to test the integrity of the pressure-
2-piece Bronze valves NPT & SJ to 3" containing parts.
QUALITY MANAGEMENT
CRANE® is committed to a philosophy of total quality management. It begins with design in compliance with pertinent MSS
and ASME Standards. Continuous improvement is applied in a methodical process to improve materials and services to meet
or exceed customer needs.
www.craneenergy.com
600 CWP/150 SWP • Full Port • Threaded Ends
www.craneenergy.com
600 CWP/150 SWP • Full Port • Solder Ends
www.craneenergy.com
600 CWP/150 SWP • Full Port • Threaded Ends
www.craneenergy.com
600 CWP/150 SWP • Full Port • Solder Ends
www.craneenergy.com
600 CWP • Full Port • Threaded Ends
www.craneenergy.com
600 CWP • Full Port • Solder Ends
www.craneenergy.com
2000 CWP • Full Port • Threaded Ends
10
www.craneenergy.com
2000 CWP • Full Port • Threaded Ends
11
www.craneenergy.com
Accessories
Extension Stems
Extension Stems may be needed when ball valves are installed in piping requiring
insulation or in other special circumstances.
A
B
B
2 ¼" Extension Stems Lever Lock Handles
SIZE A B
Dimensions
1/8~3/8 84 111 Dimensions
SIZE A B
Inches
1/2 (millimeters)
84 112 Inches
1/8"~1/2"(millimeters)
82 20
3/4 118 124 3/4"~1" 115 26
Valve1 Dimensions
118 128 Valve
11/4"~11/2"
Dimensions
11/4 134 139 132 26
Size
11/2 134A 143 B Size2"~4" A192 24B
2 200 159
21/2 3.30 169 4.37
200 3.22 .78
¼ 3 (84) 177 (111)
200
¼ (82) (20)
3.30 4.37 3.22 .78
³⁄8 (84) (111)
³⁄8 (82) (20) A283-D
3.30 4.40 件號3.22 零 件.78名 稱 件數 材 質 規 範
½ ½
(84)
件號 零 (112)
比
件 名 稱
單 4.88
件數 材 質
第三角法 名 BALL VALVE 修 訂 事 項
順序
規 範
日期修訂者 例
比(82) 單 (20)
位 mm
第三角法 名
第 版本 稱LOCKING DEVICE HANDLE
4.64 mm 設EXTENDED STEM 會 審
¾
4.52 1.02 圖
順序
設
修 訂 事 項 ¾ 日期修訂者
會 審
例
(118)
位 第 版本 稱
(124) 圖 計96 年 09 18月 日 簽 核 富山精機廠股份有限公司
(115) (26) 號 B1-02-D6-1 1
計86 年 05 13月 日簽 核 富山精機廠股份有限公司 號 B1-00-1X
FT809-3
1
A4( 210X297 )
4.64 5.03 4.52 1.02
FT809-3 A4( 210X297 )
1 (118) (128)
1 (115) (26)
5.27 5.47 5.19 1.02
1¼ (134) (139)
1¼ (132) (26)
5.27 5.62 5.19 1.02
1½ (134) (143)
1½ (132) (26)
7.87 6.25 7.55 .94
2 (200) (159)
2 (192) (24)
7.87 6.65 7.55 .94
2½ (200) (169)
2½ (192) (24)
7.87 6.96 7.55 .94
3 (200) (177)
3 (192) (24)
Available for valves: 9202, 9202, LF Available for valves: 9201, 9202
9201, LF 9202, 9211, 9212
12
www.craneenergy.com
Actuators
Actuators
CRANE® ball valves can be supplied with pneumatic or electric
actuators. Valves with pads for simplified mounting include:
½" through 2" Carbon or Stainless Steel Body
2-Piece Ball Valves
Electric Pneumatic
• Standard - 120 VAC, 60Hz, single phase, • Models provide 61 to 71,687 in-lbs. of torque with 80 psi supply air.
reversing motor; thermal overload protection; • Models for fail-safe applications provide output torques
manual override, 100% duty cycle; from 20 to 67,356 in-lbs. with 80 psi supply air.
rated torques from 347 to 868 in-lbs. • Include solenoid valves (direct mounted) and limit switches.
To order, please supply the following To order, please supply the following
information: information:
1. Valve figure number and size 1. Valve figure number and size
2. Line pressure 2. Line pressure
3. Electrical supply 3. Air supply pressure (minimum)
4. NEMA Code requirements 4. Double-Acting or Spring Return
5. Special requirements 5. If spring return, indicate fail-open or fail-close
6. Require limit switches or solenoid valve
13
www.craneenergy.com
Pressure-Temperature Ratings
The Pressure-Temperature ratings for ball valves are as shown in the charts below.
Pressure (Bar)
Pressure (PSI)
600 41.4
500 34.5
400 27.6
300 20.7
200 13.8
100 6.9
0 0
10° 38° 93° 149° 204° 260° °C
50° 100° 200° 300° 400° 500° °F
Temperature
Pressure (Bar)
Pressure (PSI)
Pressure (PSI)
14
www.craneenergy.com
Notes
15
www.craneenergy.com
CRANE Energy Flow Solutions®
CRANE Energy Global Headquarters CRANE Customer Service
4526 Research Forest Drive, Suite 400 2129 3rd Avenue, S.E.
The Woodlands, Texas 77381 U.S.A. Cullman, Alabama 35055
Tel.: (1) 936-271-6500 Tel.: (1) 256-775-3800
Fax.: (1) 936-271-6510 Fax.: (1) 256-775-3860
www.craneenergy.com
www.flowoffluids.com
EG-CR-CT-EN-L16-23-1111 (CV-303)
NUCLEAR
®
Crane Co., and its subsidiaries cannot accept responsibility for possible errors in catalogues, brochures, other printed materials, and website
information. Crane Co. reserves the right to alter its products without notice, including products already on order provided that such
alteration can be made without changes being necessary in specifications already agreed. All trademarks in this material are property of
the Crane Co. or its subsidiaries. The Crane and Crane brands logotype (Aloyco®, Center Line®, Compac-Noz®, Crane®, Duo-Chek®, Flowseal®,
Jenkins®, Krombach®, Noz-Chek®, Pacific Valves®, Stockham®, Triangle®, Uni-Chek®) are registered trademarks of Crane Co. All rights reserved.