Professional Documents
Culture Documents
O-Ring Material Offering Guide: ORD 5712 Effective September 2004
O-Ring Material Offering Guide: ORD 5712 Effective September 2004
Offering Guide
www.parkerorings.com
ORD 5712
Effective September 2004
O-Ring Material
Offering Guide
WARNING
Failure, improper selection or improper use of the
products and/or systems described herein or related items
can cause death, personal injury or property damage.
This document and other information from Parker Hannifin Corporation, its
subsidiaries and authorized distributors provides product and/or system options
for further investigation by users having technical expertise. It is important that
you analyze all aspects of your application and review the information
concerning the product or system in the current product catalog. Due to the
variety of operating conditions and applications for these products or systems,
the user, through his or her own analysis and testing, is solely responsible for
making the final selection of the products and systems and assuring that all
performance, safety and warning requirements of the application are met.
OFFER OF SALE
The items described in this document are hereby offered for sale by Parker
Hannifin Corporation, its subsidiaries and its authorized distributors. This offer
and its acceptance are governed by the provisions stated on the separate
page of this document entitled “Offer of Sale.”
Copyright © 2004, Parker Hannifin Corporation, Cleveland, OH. All rights reserved.
ORD 5712
O-Ring Material Offering Guide
Gland Designs 37
Sizing Charts 47
Quality Assurance
In the O-Ring Division’s world-class facilities, skilled Parker
technicians manufacture o-rings to exacting standards, closely
monitoring each step of the process through a Controlled Batch
Identification (CBI) program. From in-house mixing and tooling
operations to the final non-contact inspection process, state-of-the art
technology is employed to provide unparalleled material consistency
and dimensional control. Quality registrations (AS 9000, ISO 9001,
QS 9000 and VDA 6.1) are maintained to ensure superior product
performance and process repeatability.
Literature
Since their initial release decades ago, the
Parker O-Ring Handbook (ORD 5700) and
the Precision O-Ring Handbook (5705E)
(published in Europe in various
languages) have become fixtures on
the reference shelves of engineers
and seal specifiers worldwide.
Desktop Seal
Design
Parker’s Total
inPHormTM software
brings seal design and
material specification
right to the engineer’s
desktop. The software, which consists of
modules for o-ring, hydraulic and pneumatic,
static face and standard composite seal products (as
well as EMI shielding and thermal management), uses a simple
interface to guide users through the design of application-specific
glands and seals. It automatically cross-references thousands of part
numbers, and recommends materials based on the requirements of
SAE, MIL and other standards. Total inPHorm also contains a
complete array of online reference material, including test reports,
technical bulletins and seal maintenance instructions. It is available
on CD-ROM in English, German and French versions.
Online Tools
The Parker O-Ring Division's
website at www.parkerorings.com
offers many time-saving tools,
including temperature and
dimension converters, gland design
recommendation charts, a
troubleshooting utility and a pressure
calculator. The site also features an
interactive compatibility guide that
recommends elastomeric
compounds for use in hundreds of fluids - from Abietic Acid to
Zirconium Nitrate.
Product Lines
O-Rings
• Manufactured to US and international standards: AS 568B, ISO 3601, DIN
3771, JIS and metric. Custom sizes of almost any dimension.
• Miniature o-rings, large special o-rings, continuously molded and spliced
cord.
• Perfluorinated (FFKM) o-rings, custom molded products and die-cuts.
Broadest chemical resistance, highest purity and temperature resistance of
any elastomeric family - up to 320°C/608°F.
O-Ring Kits
With conveniently arranged o-rings for repair, assembly and workshop.
Accessories
Products to assist o-ring users include assembly greases and lubricants, sizing
cones and extraction tools.
Material Offering
MATERIAL OFFERING
Compounds
O-rings can be molded in a wide range of compounds in hardnesses from
40 to 95 Shore A. These materials include:
Parker O-ring compounds are formulated to meet the most stringent industry
standards, including NSF, Underwriters Laboratories (UL), Military (MIL-SPEC),
Aerospace (AMS), NASA, FDA, USDA, USP, and many customer-specific
requirements.
TYPE I
N 0674 -70
Polymer Code Sequence Number Durometer Indicator
(Single Letter) (four digits) (two digits)
TYPE II
A A 150 -70
Polymer Code Special Property Sequence Number Durometer Indicator
(Single Letter) Description (three digits) (two digits)
(Single Letter)
Polymer Code
A Polyacrylate L Fluorosilicone
B Butyl N Nitrile (Buna N) and HNBR
C Neoprene (Chloroprene) P Polyurethane
E Ethylene Propylene S Silicone
F Parofluor ULTRA™ V Fluorocarbon, Aflas®, Hifluor™,
H Hifluor™ Parofluor™
K HNBR Z Exotic Polymers
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR
POLYACRYLATE
POLYACRYLATE (ACM)
(ACM)
ACM
ACM (acrylic
(acrylic rubber)
rubber) has
has good
good resistance
resistance to
to mineral
mineral oil,
oil, oxygen
oxygen and
and ozone.
ozone.The
The water
water
compatibility
compatibility and
and cold
cold flexibility
flexibility of
of ACM
ACM are
are considerably
considerably worse
worse than
than with
thoseNBR.
with NBR.
MATERIAL OFFERING
A1111-70 Good Low Temp -40 to 325 BLACK
AA150-70 (12307) Engines & Transmissions -5 to 350 BLACK
AA154-75 (12358) Engines & Transmissions -5 to 350 BLACK
ETHYLENE ACRYLATE
ETHYLENE ACRYLATE (AEM)
(AEM)
Ethylene acrylate
Ethylene acrylate is
is aa mixed
mixed polymer
polymer of
of ethylene,
ethylene, methyl
methyl acrylate
acrylate,and
andaasmall
smallamount
amountofof
carboxylated cure-site
carboxylated cure-site monomer.
monomer. Developed
Developed as as aa lower-temperature
lower-temperature version
version of
of
Polyacrylate, but
Polyacrylate, but swells
swells slightly
slightly more.
more. Polymer
Polymer is
is sold
sold under
under the
the tradename VAMAC®®..
tradenameVAMAC
BUTYL
BUTYL RUBBER
RUBBER (IIR)
(IIR)
Butyl
Butyl rubber
rubber (isobutylene-isoprene
(isobutylene-isoprene rubber
rubber or
or IIR)
IIR) has
has aa very
very low
low permeability
permeability rate
rate and
and
good
good electrical
electrical properties,
properties, but
but poor
poor short-term
short-term rebound.
rebound.
Note: Compound numbers in (XXXXX) are the obsolete Wynn’s Precision compound
numbering system.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR
CHLOROPRENE
POLYCHLOROPRENE
RUBBER
RUBBER
(CR) (CR)
Also
Also known
known by by the
the tradename
tradename Neoprene,
Neoprene, polychloroprene
polychloroprene was
was the
the first
first synthetic
synthetic rubber
rubber
and
and exhibits
exhibits generally
generally good
good ozone,
ozone, aging,
aging, and
and chemical
chemical resistance.
resistance. ItIt has
has good
good mechanical
properties
mechanicalover
properties
a wide temperature
over a wide temperature
range. range.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR
MATERIAL OFFERING
E1257-70 NSF 61, -70 to 250 BLACK
Chloramine Resistant
E1549-70 NSF 61, WRAS, KTW -70 to 250 BLACK
E1570-70 NSF 61, Internally Lubed -70 to 250 BLACK
E1571-70 NSF 61 -70 to 250 BLACK
E1583-70 NSF 61, Internally Lubed -70 to 250 BLACK
E3609-70 NSF51, NSF 61, WRAS, -70 to 250 BLACK
KTW, FDA, USP Class VI
EB165-70 (3477) Steam, High Temp Water -70 to 250 BLACK
E0692-75 Steam, High Temp Water -70 to 250 BLACK
E0740-75 Nuclear Applications -70 to 250 BLACK
EJ150-75 (3077) FDA, USP Class VI -70 to 250 BLACK
EJ151-80 (3958) NSF 61, WRAS, KTW -70 to 250 BLACK
E0515-80 MIL-P-82744 -70 to 250 BLACK
E0540-80 General Purpose -70 to 250 BLACK
E0893-80 General Purpose -70 to 250 PURPLE
Note: Compound numbers in (XXXXX) are the obsolete Wynn’s Precision compound
numbering system.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR
FLUOROSILICONE (FVMQ
FLUOROSILICONE (FVMQ)
Fluorosilicone is
Fluorosilicone is aa silicone
silicone polymer
polymer chains
chain with
withfluorinated
fluorinatedside-chains
side-chainsfor
forimproved
improvedoiloil
and fuel
and fuel resistance.
resistance.The Themechanical
mechanicaland
andphysical
physicalproperties
propertiesare
arevery
verysimilar
similartotothose
thoseofof
silicone.
silicone.
ACRYLONITRILE-BUTADIENE (NBR)
ACRYLONITRILE-BUTADIENE (NBR)
Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene terpolymer. The
Nitrile rubber (NBR) is the general term for acrylonitrile-butadiene terpolymer. The
acrylonitrile content of nitrile sealing compounds varies considerably (18 to 50%).
acrylonitrile content of nitrile sealing compounds varies considerably (18 to 50%.)
Polymers with higher ACN content exhibit less swell in gasoline and aromatic solvents,
Polymers with higher ACN content exhibit less swell in gasoline and aromatic solvents,
while lower ACN polymers exhibit better compression set and low temperature flexibility.
while lower ACN polymers exhibit better compression set and low temperature flexibility.
Polymer is also called Buna-N.
Polymer is also called Buna-N.
N0545-40 AMS 3201 -45 to 225 BLACK
NB100-40 (1454) General Purpose -45 to 225 BLACK
Note: Compound numbers in (XXXXX) are the obsolete Wynn’s Precision compound
numbering system.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR
NBR - continued
N0299-50 AMS 3205, UL listed -55 to 225 BLACK
NA192-50 (8305) General Purpose -55 to 225 BLACK
MATERIAL OFFERING
NL151-50 (8315) Internally Lubed -55 to 225 BLACK
N0406-60 AMS-R-6855 CL 1, -40 to 225 BLACK
CL 1, GR 60
N0525-60 AMS 3212, AMS 3220 -25 to 250 BLACK
N1219-60 NSF 51, FDA -30 to 225 BLACK
NF162-65 (1106) Fuel Resistant, UL Listed -25 to 250 BLACK
N0506-65 AMS 7271 -70 to 180 BLACK
NX352-70 (7727) Carboxylated -25 to 250 BLACK
NJ253-70 (7077) FDA -35 to 212 BLACK
NF153-70 (7657) Fuel Resistant, -35 to 180 BLACK
SAE 120R1 Class II
NA151-70 (8307) General Purpose -30 to 250 BLACK
NL153-70 (8317) Internally Lubed -30 to 250 BLACK
NA153-70 (8497) Automotive Applications -30 to 250 BLACK
47-071 AMS-R-7362 -60 to 180 BLACK
N0103-70 Low Temp. -55 to 225 BLACK
N0287-70 Synthetic Lubricant -35 to 250 BLACK
Resistant, AMS 7272
N0497-70 Low Swell, SAE 120R1 -35 to 212 BLACK
CL ll UL listed
N0602-70 General Purpose, -70 to 180 BLACK
AMS-P-5315, Low Temp
N0674-70 General Purpose -30 to 250 BLACK
MIL-G-21569, Cl I,
UL listed
N0757-70 NSF 61, UL listed -30 to 225 BLACK
N0818-70 Internally Lubed -30 to 250 BLACK
Note: Compound numbers in (XXXXX) are the obsolete Wynn’s Precision compound
numbering system.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR
NBR - continued
N0828-70 Internally Lubed, Low Set -30 to 225 BLACK
N1069-70 FDA -30 to 180 BLACK
N1220-70 NSF 51, FDA -30 to 225 BLACK
N1470-70 General Purpose -40 to 225 BLACK
N1499-70 General Purpose, UL -30 to 250 BLACK
N1510-70 NSF 61 -30 to 225 BLACK
N1517-70 NSF 61 -30 to 225 BLACK
N1527-70 UL Listed -30 to 225 BLACK
NW163-75 (40601) Internally Lubed -30 to 225 RUST
NM156-75 (7377) Good Low Temp -65 to 225/250 BLACK
N0304-75 MIL-P-25732 -65 to 225/250 BLACK
N0508-75 FDA, USDA -30 to 180 BLACK
N0756-75 AMS-P-83461 -65 to 250/275 BLACK
N0951-75 High Temp,
Low Compression Set -25 to 275 BLACK
N1500-75 Low Swell, UL Listed, -35 to 212 BLACK
Fuel applications
N1565-75 UL Listed -30 to 225 BLACK
N1591-75 UL Listed -30 to 225 BLACK
NA155-80 (7538) Abrasion Resistant -25 to 250 BLACK
N0750-80 Carboxylated -25 to 250 BLACK
N1090-85 "ELF" Pneumatic, -25 to 225 BLACK
Carboxylated
NB107-90 (1929) Extrusion Resistant -25 to 225 BLACK
N0300-90 Back Up Rings -40 to 180 BLACK
N0507-90 AMS-P-5510, Low Temp -65 to 180 BLACK
N0552-90 General Purpose -30 to 250 BLACK
N0702-90 Low Compression Set -30 to 275 BLACK
N1210-90 Low Comp Set, Ext. Res. -30 to 275 BLACK
N1444-90 Parbaks only -30 to 250 BLACK
N1490-90 General Purpose -30 to 250 BLACK
Note: Compound numbers in (XXXXX) are the obsolete Wynn’s Precision compound
numbering system.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR
MATERIAL OFFERING
Hydrogenated nitrile was developed as an air-resistant variant of nitrile rubber. In HNBR,
Hydrogenated nitriledouble
the carbon-carbon was developed as an
bonds in the air-resistant
main variant
polymer chain areofsaturated
nitrile rubber. In HNBR,
with hydrogen
the carbon-carbon
atoms in a processdouble
called bonds in the main
“hydrogenation” polymer
that chain
improves theare saturated
material’s with hydrogen
thermal stability
atoms in a process
and oxidation called “hydrogenation” that improves the material’s thermal stability and
resistance.
oxidation resistance.
KB190-50 (21705) Automotive Applications -25 to 300/325 BLACK
KA170-55 (21105) High Swell, UL Listed -25 to 300/325 BLACK
KB181-60 (21926) Diesel Applications -25 to 300/325 BLACK
N1173-70 General Purpose -25 to 300/325 BLACK
N1195-70 Refrigerants -25 to 300/325 GREEN
N1206-70 Low Temperature -40 to 300/325 GREEN
N1239-70 Refrigerants -25 to 300/325 RED
KB153-70 (21337) Automotive Applications -25 to 300/325 BLACK
KW157-70 (21607) Refrigerants -25 to 300/325 GREEN
KB161-70 (21377) High Temp Hydraulics -25 to 300/325 BLACK
KA182-75 (21207) High Swell, -25 to 300/325 BLACK
Auto Applications
KA174-75 (21107) 75 Duro, General Purpose -25 to 300/325 BLACK
N1231-80 Explosive Decompression -25 to 300/325 BLACK
KB162-80 (21378) High Temp Hydraulics -25 to 300/325 BLACK
KB163-90 (21379) High Temp Hydraulics -25 to 300/325 BLACK
POLYURETHANE
POLYURETHANE (AU,
(AU, EU)
EU)
Polyurethane
Polyurethaneelastomers
elastomershave
haveexcellent
excellentwear
wearresistance,
resistance,high
hightensile
tensilestrength
strengthand
andhigh
high
elasticity
elasticityinincomparison
comparisonwith
withany
anyother
otherelastomers.
elastomers.Permeability
Permeabilityisisgood
goodandandcomparable
comparable
with
withbutyl.
butyl. Millable
Millableurethanes
urethanesshould
shouldnot
notbebeconfused
confusedwith
withthermoplastic
thermoplasticurethanes,
urethanes,which
are generally
which harder,harder,
are generally less flexible, and have
less flexible, andslightly better wear
have slightly betterresistance.
wear resistance.
Note: Compound numbers in (XXXXX) are the obsolete Wynn’s Precision compound
numbering system.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR
Millable Type
SILICONE RUBBER
SILICONE RUBBER (VMQ,
(VMQ, PVMQ)
PVMQ)
Silicone elastomers have relatively low tensile strength, poor tear and wear resistance.
Silicone elastomers have relatively low tensile strength, poor tear and wear resistance.
Silicones also possess good insulating properties and tend to be physiologically neutral.
Silicones also possess good insulating properties and tend to be physiologically neutral.
S0469-40 AMS 3301 -75 to 400 RUST
S0802-40 FDA -60 to 400 WHITE
SM150-40 (11354) FDA -60 to 400 RUST
S0595-50 AMS 3302 -70 to 400 RUST
S0899-50 ZZ-R-765 CL 1a,1b,2a,2b -103 to 400 RUST
GR 50, AMS 3345
SM151-50 (11355) FDA, UL -70 to 400 RUST
S1538-55 FDA, USP Class VI -60 to 450 TRANS
S0317-60 FDA, USDA -103 to 450 RUST
S0613-60 ZZ-R-765 Cl 2b, Gr 60, -60 to 450 RUST
AMS 3303
SM152-60 (11356) AMS 3303, UL, FDA -60 to 450 RUST
SB160-65 (11486) Coolant Applications -60 to 450 RUST
S0383-70 ZZ-R-765 Cl 1a, 1b, -175 to 400 RUST
Gr 70, AMS 3337
S0455-70 High Temperature -65 to 450/500 RUST
S0604-70 ZZ-R-765 Cl 2a, 2b, Gr 70 -65 to 450 RUST
AMS 3304, AMS 3357
MIL-G-21569
S1138-70 FDA -60 to 400 RUST
S1224-70 ZZ-R-765 Cl 2a, 2b, Gr 70 -65 to 450 RUST
AMS 3304, AMS 3357
MIL-G-21569
SM153-70 (11357) UL Listed, FDA -60 to 450 RUST
SB174-70 (11227) General Purpose -60 to 450 BLACK
SB161-70 (11707) Low Compression Set -60 to 450 RUST
S0355-75 AMS 7267, FDA, USDA -60 to 450 RUST
S0614-80 ZZ-R-765 Cl 2a, 2b -65 to 450 RUST
Gr 80, AMS 3305
Note: Compound numbers in (XXXXX) are the obsolete Wynn’s Precision compound
numbering system.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR
MATERIAL OFFERING
V0986-50 General Purpose -15 to 400 BROWN
V0763-60 General Purpose -15 to 400 BROWN
V0769-60 General Purpose -15 to 400 BLACK
VA150-65 (19356) General Purpose -15 to 400 BLACK
V1262-65 Low Swell - Flex Fuel -15 to 400 BLACK
Blends UL listed
V0494-70 Acid Resistant -15 to 400 BLACK
V0680-70 FDA, USDA, NSF 51 -15 to 400 RED
V0834-70 Acid Resistant, Steam -15 to 400 BLACK
VW153-75 (16207) General Purpose -15 to 400 BROWN
VA203-75 (16737) Extrusion Resistant, -15 to 400 BLACK
Diesel Fuel Injectors
VW173-75 (19457) Automotive Applications -15 to 400 GREEN
VB184-75 (19487) Transmission Applications -15 to 400 BLACK
VG183-75 (19657) Low Temp./”GLT Type” -40 to 400 BLACK
VB153-75 (19717) Good Compression Set, -15 to 400 BLACK
Fuels
VG162-75 (19727) Good Fuel Resistance -15 to 400 BLACK
V0747-75 AMS-R-83248, TY I, CL I -15 to 400 BLACK
UL listed
V0835-75 AMS-R-83485, “GLT Type” -40 to 400 BLACK
V0848-75 PTFE Loaded -15 to 400 BLACK
V0884-75 General Purpose, UL listed -15 to 400 BROWN
V1163-75 "GFLT Type”, UL listed -35 to 400 BLACK
V1164-75 Low Set, AMS 7276, -15 to 400 BLACK
AMS-R-83248, TY I, CL I
Note: Compound numbers in (XXXXX) are the obsolete Wynn’s Precision compound
numbering system.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR
Note: Compound numbers in (XXXXX) are the obsolete Wynn’s Precision compound
numbering system.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR (Degrees° F) COLOR
(AFLAS™)
TETRAFLUOROETHYLENE - PROPYLENE (AFLAS)
This material is a copolymer of TFE and
and propylene.
propylene.Its
Its chemical
chemicalresistance
resistanceisisexcellent
excellent
across a wide range of aggressive media. Polymer is sold under the tradename Aflas™.
across a wide range of aggressive media. Polymer is sold under the tradename Aflas®.
MATERIAL OFFERING
V1006-75 General Purpose 25 to 450 BLACK
VP101-80 (20018) General Purpose 25 to 450 BLACK
VP102-80 Good Compression 15 to 450 BLACK
Set Resistance
V1041-85 ED Resistant 15 to 450 BLACK
VP103-90 (20019) Extrusion Resistant 25 to 450 BLACK
HIGHLY FLUORINATED
HIGH PERFORMANCE ELASTOMER (HiFluor)
FLUOROELASTOMERS (Hifluor™)
Hifluor is Parker’s tradename for high performance fluoroelastomers – materials that
“bridge the gap” between traditional fluorocarbon and perfluoroelastomer.
Note: Compound numbers in (XXXXX) are the obsolete Wynn’s Precision compound
numbering system.
What is Parofluor™?
The Parofluor Series consists of advanced
perfluorinated elastomers (FFKMs) developed
and produced exclusively by Parker Hannifin.
Parofluor materials exhibit outstanding
retained resiliency as compared with other
perfluorinated elastomers, because they're
formulated specifically for use in the most
demanding sealing applications.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR Degrees° F COLOR
PERFLUOROELASTOMER (Parofluor)
PERFLUOROELASTOMER (Parofluor)
Perfluoroelastomer isis essentially
Perfluoroelastomer a rubber version of PTFE.
a rubber version Available
Available from Parker
fromE. Soldunder the under
by Parker
tradenames
the Parofluor™
tradenames Parofluor™ andand
Parofluor ULTRA™.
Parofluor ULTRA.
MATERIAL OFFERING
offer ultra high temperature
resistance up to 320°C (608°F),
broad chemical resistance and ultra
high purity.
TEMP. RANGE
COMPOUND NO. RECOMMENDED FOR Degrees° F COLOR
PERFLUOROELASTOMER(Parofluor
PERFLUOROELASTOMER (ParofluorUltra)
Ultra)
Perfluoroelastomerisisessentially
Perfluoroelastomer a rubber version of version
a rubber PTFE. Available
of PTFE. from
SoldParker under
by Parker the the
under
tradenamesParofluor™
tradenames Parofluor™andandParofluor
ParofluorULTRA.
ULTRA™.
Gasoline/Alcohol Blends*
Dishwashing Detergents
Anhydrous Ammonia
MFG or Natural Gas
Naptha or Kerosene
Laundry Detergents
Heated Fuel Oil
MPS Gas
Gasoline
LP-Gas
SERVICE
CODE A B C D E F G H I J L M
EA454-50 (3575)
KA170-50 (21105)
L1120-70
N0299-50
N0497-70
N0674-70
N0757-70
N1499-70
N1500-75
N1591-75 (67357)
NF162-65 (1106)
N1565-75 (67027)
N1527-70 (67147)
SM151-50 (11355)
SM152-60 (11356)
SM153-70 (11357)
V0747-75
VA151-75 (19357)
V0884-75
V1163-75
V1226-75
V1262-65
V1263-75
V1264-90
V1436-75
* Contact factory for additional information regarding specific ratios of alcohol (methyl and/or
ethyl) and gasoline.
Parker Hannifin Corporation • O-Ring Division
2360 Palumbo Drive, PO Box 11751, Lexington, KY 40512-1751
Phone: (859) 269-2351 • Fax: (859) 335-5128
22 www.parkerorings.com
ORD 5712
O-Ring Material Offering Guide
MATERIAL OFFERING
standards are established by the United States Department of Agriculture (USDA).
Typical applications for our FDA, NSF 51, USDA materials are disposable medical
devices, surgical instruments and medical fluid dispensing components, as well as a
wide variety of food and beverage handling equipment. The type of
approval/certification required generally rests with the end customer's regulatory
expectations for the specific application.
PARKER HARD-
COMPOUND POLYMER NESS COLOR SERVICE
WATER
PARKER POLYMER HARD- CONTACT SERVICE
COMPOUND NESS TEMP
* NSF 61 listed materials given a commercial hot water rating are also certified for cold water
** Commercial Hot = Tested at 82° C (180° F) (Commercial Hot)
*** Cold Water = Tested at 23° C (73.4° F)
Aerospace Materials
MATERIAL OFFERING
AMS3208 C0267-50 45-55 Weather Resistant, Chloroprene Type
(1) Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.
(2) National Aerospace Standard issued by Aerospace Industries Association of America, Inc.
(1) Aerospace Material Specification issued by the Society of Automotive Engineers, Inc.
(2) National Aerospace Standard issued by Aerospace Industries Association of America, Inc.
MATERIAL OFFERING
Class Grade Temperature Range(1)
1a. 1b. 2a. 2b. 50 S0899-50 - 103 to 437°F (-75 to 225°C) Low and High
Temperature Resistant, Low Compression Set
(1) These temperatures are limits for particular tests required by the specifications, but they do not necessarily
represent operating temperature limits.
(1) These temperatures are limits for particular tests required by the specifications, but they do not necessarily
represent operating temperature limits.
Engineering
Tools
ENGINEERING TOOLS
The following charts are included to facilitate engineering analysis.
Additional information is available in the Parker Handbook (ORD 5700)
or online at www.parkerorings.com
5 6 7 8 9 1000
4
3
2
5 6 7 8 9 100
Compression Load per Linear Inch of Seal — Pounds
4
90
3
80
2
.070 Cross Section
70
90
60
50
80
5 6 7 8 9 10
90
70
60
50
80
90
4
70
3
60
80
50
90
ss
ne
rd
Ha
70
A
e
or
.4 .5 .6 .7.8.91
Sh
60
50
80
70
60
50
.3
.2
.1
5%
40%
30%
20%
10%
Percent Compression
5 6 7 8 9 1000
4
3
2
5 6 7 8 9 100
90
90
4
70
ENGINEERING TOOLS
60
80
2
90
50
.103 Cross Section
70
80
5 6 7 8 9 10
60
50
70
90
60
50
80
4
70
3
60
90
ss
50
ne
ard
H
A
e
or
.4 .5 .6 .7.8.91
Sh
80
70
60
50
.3
.2
.1
5%
40%
30%
20%
10%
Percent Compression
5 6 7 8 9 1000
4
3
2
5 6 7 8 9 100
90
4
80
3
70
.139 Cross Section
2
80
90
60
5 6 7 8 9 10
70
50
80
90
60
70
80
4
50
ss
ne
90
80
rd
Ha
2
70
60
A
e
or
50
Sh
.4 .5 .6 .7.8.91
70
60
50
60
.3
50
.2
.1
5%
40%
30%
20%
10%
Percent Compression
5 6 7 8 9 1000
4
3
90
2
5 6 7 8 9 100
80
90
80
60
90
4
50
70
ENGINEERING TOOLS
80
60
90
2
.210 Cross Section
50
70
60
5 6 7 8 9 10
ss
80
ne
50
rd
90
Ha
70
A
e
or
Sh
60
80
4
50
3
70
2
60
50
.4 .5 .6 .7.8.9 1
.3
.2
.1
5%
40%
30%
20%
10%
Percent Compression
5 6 7 8 9 1000
4
3
90
2
80
5 6 7 8 9 100
90
70
60
90
80
50
4
80
3
60
50
70
90
2
.275 Cross Section
60
ss
ne
50
5 6 7 8 9 10
rd
Ha
80
A
e
or
90
70
Sh
60
4
80
50
3
70
2
60
50
.4 .5 .6 .7.8.91
.3
.2
.1
5%
40%
30%
20%
10%
Percent Compression
Extrusion
13.8 200
ENGINEERING TOOLS
6.9 100
mm 0 .3 .5 .8 1.0
In. 0 .010 .020 .030 .040
Total Diametral Clearance*
(Radial Clearance if Concentricity Between Piston and
Cylinder is Rigidly Maintained)
* Reduce the clearance shown by 60% when using silicone or fluorosilicone elastomers.
Engineering
Design
Notes
Gland
Designs
Parker offers o-rings for use in static as well as dynamic sealing applications.
Static seals are those where the mating parts of the gland do not have
movement relative to each other. These seals include face, radial, dovetail.
Examples of these seals and the corresponding design charts are found on
pages 38-43. Dynamic seals include reciprocating, floating pneumatic,
oscillating, and rotary applications. Dynamic seals are defined by one of the
gland parts having movement relative to the other part. Gland design
recommendations for a reciprocating seal are provided on pages 44 and 45.
0˚ to 5˚ * Break Corners
(Typ.)
Approx. .005 RAD. W
X
R Groove W
63
I.D.
32 for liquids X (= Gland Depth)
16 for vacuum
and gases
G
Gland Detail
Finishes are RMS values
(R f D i Ch A4 2 b l )
Section W-W
W W
.005
Max.
W
I.D.
.003 Max.
O-Ring W L G R
Size Cross Section Squeeze Groove Width
Parker
No. 2-Size Gland Vacuum Groove
AS568B Nominal Actual Depth Actual % Liquids and Gases Radius
1/2 E
1/2 E
O-Ring Material Offering Guide
40
(e)
0˚ to 5˚
Break Corners
(Typ.)
Approx. .005 RAD.
1/2 E W W Pressure Pressure Pressure
.005
32 Typ.
W
R W
F L Gland
63
I.D.
63
32 Depth
.003 Typ.
G G G1 G2
F Groove Section W-W No One Two
Depth (Ref.)
Gland Detail Parbak Parbak Parbak
Finishes are RMS values. Ring Ring Rings
www.parkerorings.com
Phone: (859) 269-2351 • Fax: (859) 335-5128
2360 Palumbo Drive, PO Box 11751, Lexington, KY 40512-1751
Parker Hannifin Corporation • O-Ring Division
Industrial O-Ring Static Seal Glands
O-Ring W L E (a) G - Groove Width R Max.
ORD 5712
2-Size Cross-Section Gland Squeeze Diametral No Parbak 1 Parbak 2 Parbak Groove Eccen-
AS568B- Nomin. Actual Depth Actual % Clearance Ring (G) Ring (G1) Rings (G2) Radius tricity (b)
41
309 .210 .170 .032 15 .003 .281 .311 .410 .020
through 3/16 ±.005 to to to to to to to to .004
395 .173 .045 21 .006 .286 .316 .415 .035
425 .275 .226 .040 15 .004 .375 .408 .538 .020
through 1/4 ±.006 to to to to to to to to .005
475 .229 .055 20 .007 .380 .413 .543 .035
(a) Clearance (extrusion gap) must be held to a minimum consistent with design requirements for temperature range variation.
(b) Total indicator reading between groove and adjacent bearing surface.
(c) Reduce maximum diametral clearance 50% when using silicone or fluorosilicone o-rings.
(d) For ease of assembly, when Parbaks are used, gland depth may be increased up to 5%.
www.parkerorings.com
Phone: (859) 269-2351 • Fax: (859) 335-5128
2360 Palumbo Drive, PO Box 11751, Lexington, KY 40512-1751
Parker Hannifin Corporation • O-Ring Division
GLAND DESIGNS
ORD 5712
O-Ring Material Offering Guide
G
(to sharp
corner)
L R
66˚
R1
Mean Groove
Diameter Coincides
With Mean
O-ring Diameter. Finishes are RMS values
It should be noted that although this method has been used successfully, it is not
generally recommended. The inherent characteristics of the groove design limit the
amount of void area. Normally acceptable tolerance extremes, wide service
temperature ranges and fluid media that cause high swell of the elastomer are
conditions that cannot be tolerated in this type of groove design.
NOTE: Parker offers dovetail cutters for various sizes. For more information, contact a
Parker O-Ring Applications Engineer.
W G
O-Ring Cross Section L Gland Width
Size Gland Squeeze (To sharp
AS568B- Nominal Actual Depth % corner) R R1
should take into consideration that perfluorinated elastomers may require more squeeze
than an FKM material to obtain optimum sealing performance. To increase squeeze,
modifications of the design recommendations shown above are necessary.
Piston Gland
Rod Gland
O-Ring Material Offering Guide
Gland Detail
44
0˚ to 5˚
Break Corners
(Typ.)
Approx. .005 Rad. W W .005 Pressure Pressure Pressure
1/2E
16 Typ.
R W W
Gland
X
X
F L I.D.
32 Depth
.003 Typ. G G1 G2
G Section W-W No One Two
F Groove
Depth (Ref.) Parbak Parbak Parbak
Ring Ring Rings
Surface Finish X:
32 Without Parbak Ring
63 With Parbak Ring
www.parkerorings.com
Phone: (859) 269-2351 • Fax: (859) 335-5128
2360 Palumbo Drive, PO Box 11751, Lexington, KY 40512-1751
Parker Hannifin Corporation • O-Ring Division
Industrial Reciprocating O-Ring Packing Glands
ORD 5712
45
222 .123 .022 16 .006 .192 .213 .280 .025
309 .210 .185 .017 8 .003 .281 .311 .410 .020
through 3/16 ±.005 to to to to to to to to .004
349 .188 .030 14 .006 .286 .316 .415 .035
425 .275 .237 .029 11 .004 .375 .408 .538 .020
through 1/4 ±.006 to to to to to to to to .005
460 .240 .044 16 .007 .380 .413 .543 .035
(a) Clearance (extrusion gap) must be held to a minimum consistent with design requirements for temperature range variation.
(b) Total indicator reading between groove and adjacent bearing surface.
(c) O-rings not listed are not recommended for reciprocating applications.
www.parkerorings.com
Phone: (859) 269-2351 • Fax: (859) 335-5128
2360 Palumbo Drive, PO Box 11751, Lexington, KY 40512-1751
Parker Hannifin Corporation • O-Ring Division
GLAND DESIGNS
ORD 5712
O-Ring Material Offering Guide
Gland
Design
Notes
Sizing
Charts
The following charts provide dimensions for standard shrinkage materials only.
These correspond to AS568B dimensions. O-rings manufactured from
compounds with different shrinkage rates will provide slightly different
dimensions and tolerances when standard tooling is used. Custom tooling
may be necessary for some compounds in order to meet AS568B dimensions
and tolerances. For further information contact a Parker O-Ring Applications
Engineer.
SIZING CHARTS
2-001* .029 .004 0,74 0,10 2-026 1.239 .011 31,47 0,28
2-002* .042 .004 1,07 0,10 2-027 1.301 .011 33,05 0,28
2-003* .056 .004 1,42 0,10 2-028 1.364 .013 34,65 0,33
2-004 .070 .005 1,78 0,13 2-029 1.489 .013 37,82 0,33
2-005 .101 .005 2,57 0,13 2-030 1.614 .013 41,00 0,33
2-006 .114 .005 2,90 0,13 2-031 1.739 .015 44,17 0,38
2-007 .145 .005 3,68 0,13 2-032 1.864 .015 47,35 0,38
2-008 .176 .005 4,47 0,13 2-033 1.989 .018 50,52 0,46
2-009 .208 .005 5,28 0,13 2-034 2.114 .018 53,70 0,46
2-010 .239 .005 6,07 0,13 2-035 2.239 .018 56,87 0,46
2-011 .301 .005 7,65 0,13 2-036 2.364 .018 60,05 0,46
2-012 .364 .005 9,25 0,13 2-037 2.489 .018 63,22 0,46
2-013 .426 .005 10,82 0,13 2-038 2.614 .020 66,40 0,51
2-014 .489 .005 12,42 0,13 2-039 2.739 .020 69,57 0,51
2-015 .551 .007 14,00 0,18 2-040 2.864 .020 72,75 0,51
2-016 .614 .009 15,60 0,23 2-041 2.989 .024 75,92 0,61
2-017 .676 .009 17,17 0,23 2-042 3.239 .024 82,27 0,61
2-018 .739 .009 18,77 0,23 2-043 3.489 .024 88,62 0,61
2-019 .801 .009 20,35 0,23 2-044 3.739 .027 94,97 0,69
2-020 .864 .009 21,95 0,23 2-045 3.989 .027 101,32 0,69
2-021 .926 .009 23,52 0,23 2-046 4.239 .030 107,67 0,76
2-022 .989 .010 25,12 0,25 2-047 4.489 .030 114,02 0,76
2-023 1.051 .010 26,70 0,25 2-048 4.739 .030 120,37 0,76
2-024 1.114 .010 28,30 0,25 2-049 4.989 .037 126,72 0,94
2-025 1.176 .011 29,87 0,28 2-050 5.239 .037 133,07 0,94
(a) The rubber compound must be added when ordering by the 2-size number
(i.e., N0674 2-007).
(b) This chart provides dimensions for standard (AN) shrinkage materials ONLY.
These correspond to AS568B dimensions. O-rings manufactured out of compounds
with different shrinkage rates (other than AN) will produce slightly different dimensions
and tolerances. For more information on shrinkage rates, see Parker O-Ring
Handbook (ORD 5700).
2-102 .049 .005 1,24 0,13 2-141 2.300 .020 58,42 0,51
2-103 .081 .005 2,06 0,13 2-142 2.362 .020 59,99 0,51
2-104 .112 .005 2,84 0,13 2-143 2.425 .020 61,60 0,51
2-105 .143 .005 3,63 0,13 2-144 2.487 .020 63,17 0,51
2-106 .174 .005 4,42 0,13 2-145 2.550 .020 64,77 0,51
2-107 .206 .005 5,23 0,13 2-146 2.612 .020 66,34 0,51
2-108 .237 .005 6,02 0,13 2-147 2.675 .022 67,95 0,56
2-109 .299 .005 7,59 0,13 2-148 2.737 .022 69,52 0,56
2-110 .362 .005 9,19 0,13 2-149 2.800 .022 71,12 0,56
2-111 .424 .005 10,77 0,13 2-150 2.862 .022 72,69 0,56
2-112 .487 .005 12,37 0,13 2-151 2.987 .024 75,87 0,61
2-113 .549 .007 13,94 0,18 2-152 3.237 .024 82,22 0,61
2-114 .612 .009 15,54 0,23 2-153 3.487 .024 88,57 0,61
2-115 .674 .009 17,12 0,23 2-154 3.737 .028 94,92 0,71
2-116 .737 .009 18,72 0,23 2-155 3.987 .028 101,27 0,71
2-117 .799 .010 20,30 0,25 2-156 4.237 .030 107,62 0,76
2-118 .862 .010 21,89 0,25 2-157 4.487 .030 113,97 0,76
2-119 .924 .010 23,47 0,25 2-158 4.737 .030 120,32 0,76
2-120 .987 .010 25,07 0,25 2-159 4.987 .035 126,67 0,89
2-121 1.049 .010 26,64 0,25 2-160 5.237 .035 133,02 0,89
2-122 1.112 .010 28,24 0,25 2-161 5.487 .035 139,37 0,89
2-123 1.174 .012 29,82 0,30 2-162 5.737 .035 145,72 0,89
2-124 1.237 .012 31,42 0,30 2-163 5.987 .035 152,07 0,89
2-125 1.299 .012 32,99 0,30 2-164 6.237 .040 158,42 1,02
2-126 1.362 .012 34,59 0,30 2-165 6.487 .040 164,77 1,02
2-127 1.424 .012 36,17 0,30 2-166 6.737 .040 171,12 1,02
2-128 1.487 .012 37,77 0,30 2-167 6.987 .040 177,47 1,02
2-129 1.549 .015 39,34 0,38 2-168 7.237 .045 183,82 1,14
2-130 1.612 .015 40,94 0,38 2-169 7.487 .045 190,17 1,14
2-131 1.674 .015 42,52 0,38 2-170 7.737 .045 196,52 1,14
2-132 1,737 .015 44,12 0,38 2-171 7.987 .045 202,87 1,14
2-133 1,799 .015 45,69 0,38 2-172 8.237 .050 209,22 1,27
2-134 1.862 .015 47,29 0,38 2-173 8.487 .050 215,57 1,27
2-135 1.925 .017 48,90 0,43 2-174 8.737 .050 221,92 1,27
2-136 1.987 .017 50,47 0,43 2-175 8.987 .050 228,27 1,27
2-137 2.050 .017 52,07 0,43 2-176 9.237 .055 234,62 1,40
SIZING CHARTS
2-138 2.112 .017 53,64 0,43 2-177 9.487 .055 240,97 1,40
2-139 2.175 .017 55,25 0,43 2-178 9.737 .055 247,32 1,40
2-140 2.237 .017 56,82 0,43
2-201 .171 .055 4,34 0,13 2-236 3.234 .024 82,14 0,61
2-202 .234 .005 5,94 0,13 2-237 3.359 .024 85,32 0,61
2-203 .296 .005 7,52 0,13 2-238 3.484 .024 88,49 0,61
2-204 .359 .005 9,12 0,13 2-239 3.609 .028 91,67 0,71
2-205 .421 .005 10,69 0,13 2-240 3.734 .028 94,84 0,71
2-206 .484 .005 12,29 0,13 2-241 3.859 .028 98,02 0,71
2-207 .546 .007 13,87 0,18 2-242 3.984 .028 101,19 0,71
2-208 .609 .009 15,47 0,23 2-243 4.109 .028 104,37 0,71
2-209 .671 .010 17,04 0,23 2-244 4.234 .030 107,54 0,76
2-210 .734 .010 18,64 0,25 2-245 4.359 .030 110,72 0,76
2-211 .796 .010 20,22 0,25 2-246 4.484 .030 113,89 0,76
2-212 .859 .010 21,82 0,25 2-247 4.609 .030 117,07 0,76
2-213 .921 .010 23,39 0,25 2-248 4.734 .030 120,24 0,76
2-214 .984 .010 24,99 0,25 2-249 4.859 .035 23,42 0,89
2-215 1.046 .010 26,5 0,25 2-250 4.984 .035 126,59 0,89
2-216 1.109 .012 28,17 0,30 2-251 5.109 .035 129,77 0,89
2-217 1.171 .012 29,74 0,30 2-252 5.234 .035 132,94 0,89
2-218 1.234 .012 31,34 0,30 2-253 5.359 .035 136,12 0,89
2-219 1.296 .012 32,92 0,30 2-254 5.484 .035 139,29 0,89
2-220 1.359 .012 34,52 0,30 2-255 5.609 .035 142,47 0,89
2-221 1.421 .012 36,09 0,30 2-256 5.734 .035 145,64 0,89
2-222 1.484 .015 37,69 0,38 2-257 5.859 .035 148,82 0,89
2-223 1.609 .015 40,87 0,38 2-258 5.984 .035 151,99 0,89
2-224 1.734 .015 44,04 0,38 2-259 6.234 .040 158,34 1,02
2-225 1.859 .018 47,22 0,46 2-260 6.484 .040 164,69 1,02
2-226 1.984 .018 50,39 0,46 2-261 6.734 .040 171,04 1,02
2-227 2.109 .018 53,57 0,46 2-262 6.984 .040 177,39 1,02
2-228 2.234 .020 56,74 0,51 2-263 7.234 .045 183,74 1,14
2-229 2.359 .020 59,92 0,51 2-264 7.484 .045 190,09 1,14
2-230 2.484 .020 63,09 0,51 2-265 7.734 .045 196,44 1,14
2-231 2.609 .020 66,27 0,51 2-266 7.984 .045 202,79 1,14
2-232 2.734 .024 69,44 0,6 2-267 8.234 .050 209,14 1,27
2-233 2.859 .024 72,62 0,61 2-268 8.484 .050 215,49 1,27
2-234 2.984 .024 75,79 0,61 2-269 8.734 .050 221,84 1,27
2-235 3.109 .024 78,97 0,61 2-270 8.984 .050 228,19 1,27
2-271 9.234 .055 234,54 1,40 2-278 11.984 .065 304,39 1,65
2-272 9.484 .055 240,89 1,40 2-279 12.984 .065 329,79 1,65
2-273 9.734 .055 247,24 1,40 2-280 13.984 .065 355,19 1,65
2-274 9.984 .055 253,59 1,40 2-281 14.984 .065 380,59 1,65
2-275 10.484 .055 266,29 1,40 2-282 15.955 .075 405,26 1,91
2-276 10.984 .065 278,99 1,65 2-283 16.955 .080 430,66 2,03
2-277 11.484 .065 291,69 1,65 2-284 17.955 .085 456,06 2,16
SIZING CHARTS
2-309 .412 .005 10,46 0,13 2-344 3.850 .028 97,79 0,71
2-310 .475 .005 12,07 0,13 2-345 3.975 .028 100,97 0,71
2-311 .537 .007 13,64 0,18 2-346 4.100 .028 104,14 0,71
2-312 .600 .009 15,24 0,23 2-347 4.225 .030 107,32 0,76
2-313 .662 .009 16,81 0,23 2-348 4.350 .030 110,49 0,76
2-314 .725 .010 18,42 0,25 2-349 4.475 .030 113,67 0,76
2-315 .787 .010 19,99 0,25 2-350 4.600 .030 116,84 0,76
2-316 .850 .010 21,59 0,25 2-351 4.725 .030 120,02 0,76
2-317 .912 .010 23,16 0,25 2-352 4.850 .030 123,19 0,76
2-318 .975 .010 24,77 0,25 2-353 4.975 .037 126,37 0,94
2-319 1.037 .010 26,34 0,25 2-354 5.100 .037 129,54 0,94
2-320 1.100 .012 27,94 0,30 2-355 5.225 .037 132,72 0,94
2-321 1.162 .012 29,51 0,30 2-356 5.350 .037 135,89 0,94
2-322 1.225 .012 31,12 0,3 2-357 5.475 .037 139,07 0,94
2-323 1.287 .012 32,69 0,30 2-358 5.600 .037 142,24 0,94
2-324 1.350 .012 34,29 0,30 2-359 5.725 .037 145,42 0,94
2-325 1.475 .015 37,47 0,38 2-360 5.850 .037 148,59 0,94
2-326 1.600 .015 40,64 0,38 2-361 5.975 .037 151,77 0,94
2-327 1.725 .015 43,82 0,38 2-362 6.225 .040 158,12 1,02
2-328 1.850 .015 46,99 0,38 2-363 6.475 .040 164,47 1,02
2-329 1.975 .018 50,17 0,46 2-364 6.725 .040 170,82 1,02
2-330 2.100 .018 53,34 0,46 2-365 6.975 .040 177,17 1,02
2-331 2.225 .018 56,52 0,46 2-366 7.225 .045 183,52 1,14
2-332 2.350 .018 59,69 0,46 2-367 7.475 .045 189,87 1,14
2-333 2.475 .020 62,87 0,51 2-368 7.725 .045 196,22 1,14
2-334 2.600 .020 66,04 0,51 2-369 7.975 .045 202,57 1,14
2-335 2.725 .020 69,22 0,51 2-370 8.225 .050 208,92 1,27
2-336 2.850 .020 72,39 0,51 2-371 8.475 .050 215,27 1,27
2-337 2.975 .024 75,57 0,61 2-372 8.725 .050 221,62 1,27
2-338 3.100 .024 78,74 0,61 2-373 8.975 .050 227,97 1,27
2-339 3.225 .024 81,92 0,6 2-374 9.225 .055 234,32 1,40
2-340 3.350 .024 85,09 0,61 2-375 9.475 .055 240,67 1,40
2-341 3.475 .024 88,27 0,61 2-376 9.725 .055 247,02 1,40
2-342 3.600 .028 91,44 0,71 2-377 9.975 .055 253,37 1,40
2-343 3.725 .028 94,62 0,71 2-378 10.475 .060 266,07 1,52
2-379 10.975 .060 278,77 1,52 2-388 18.955 .090 481,41 2,29
2-380 11.475 .065 291,47 1,65 2-389 19.955 .095 506,81 2,41
2-381 11.975 .065 304,17 1,65 2-390 20.955 .095 532,21 2,41
2-382 12.975 .065 329,57 1,65 2-391 21.955 .100 557,61 2,54
2-383 13.975 .070 354,97 1,78 2-392 22.940 .105 582,68 2,67
2-384 14.975 .070 380,37 1,78 2-393 23.940 .110 608,08 2,79
2-385 15.955 .075 405,26 1,91 2-394 24.940 .115 633,48 2,92
2-386 16.955 .080 430,66 2,03 2-395 25.940 .120 658,88 3,05
2-387 17.955 .085 456,06 2,16
SIZING CHARTS
2-425 4.475 .033 113,67 0,84 2-451 10.975 .060 278,77 1,52
2-426 4.600 .033 116,84 0,84 2-452 11.475 .060 291,47 1,52
2-427 4.725 .033 120,02 0,84 2-453 11.975 .060 304,17 1,52
2-428 4.850 .033 123,19 0,84 2-454 12.475 .060 316,87 1,52
2-429 4.975 .037 126,37 0,94 2-455 12.975 .060 329,57 1,52
2-430 5.100 .037 129,54 0,94 2-456 13.475 .070 342,27 1,78
2-431 5.225 .037 132,72 0,94 2-457 13.975 .070 354,97 1,78
2-432 5.350 .037 135,89 0,94 2-458 14.475 .070 367,67 1,78
2-433 5.475 .037 139,07 0,94 2-459 14.975 .070 380,37 1,78
2-434 5.600 .037 142,24 0,94 2-460 15.475 .070 393,07 1,78
2-435 5.725 .037 145,42 0,94 2-461 15.955 .075 405,26 1,91
2-436 5.850 .037 148,59 0,94 2-462 16.455 .075 417,96 1,91
2-437 5.975 .037 151,77 0,94 2-463 16.955 .080 430,66 2,03
2-438 6.225 .040 158,12 1,02 2-464 17.455 .085 443,36 2,16
2-439 6.475 .040 164,47 1,02 2-465 17.955 .085 456,06 2,16
2-440 6.725 .040 170,82 1,02 2-466 18.455 .085 468,76 2,16
2-441 6.975 .040 177,17 1,02 2-467 18.955 .090 481,46 2,29
2-442 7.225 .045 183,52 1,14 2-468 19.455 .090 494,16 2,29
2-443 7.475 .045 189,87 1,14 2-469 19.955 .095 506,86 2,41
2-444 7.725 .045 196,22 1,14 2-470 20.955 .095 532,26 2,41
2-445 7.975 .045 202,57 1,14 2-471 21.955 .100 557,66 2,54
2-446 8.475 .055 215,27 1,40 2-472 22.940 .105 582,68 2,67
2-447 8.975 .055 227,97 1,40 2-473 23.940 .110 608,08 2,79
2-448 9.475 .055 240,67 1,40 2-474 24.940 .115 633,48 2,92
2-449 9.975 .055 253,37 1,40 2-475 25.940 .120 658,88 3,05
2-450 10.475 .060 266,07 1,52
The following charts provide dimensions for standard shrinkage materials only.
These correspond to AS568B dimensions. O-rings manufactured from
compounds with different shrinkage rates will provide slightly different
dimensions and tolerances when standard tooling is used. Custom tooling may
be necessary for some compounds in order to meet AS568B dimensions and
tolerances. Contact a Parker O-Ring Applications Engineer with any questions.
3-9XX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
O-Rings for Metric Tube Fittings (ISO 6149) (Similar to SAE J2244)
Parker O-Ring Division is tooled in these sizes for Nitrile and Fluorocarbon rubber only.
Contact the division for availability.
Tol. Tol.
Port O-Ring Parker ID ± W ±
Thread Name Part No. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
5-XXX Sizes
Tol. Tol. Tol. Tol.
Parker ID ± Width ± ID ± Width ±
No. In. In. In. In. mm mm mm mm
8-XXX Sizes
Parker ID Tol. R T A Tol. W Tol.
No. In. ± ±.010 (Ref.) In. ± In. ±
Notes: 1. Parbak sizes are designed to correspond with the Parker 2-xxx, 3-xxx and
AS568B series o-ring with which they are used.
2. Complete call-out consists of the digit 8, the dash number for the size wanted
and the rubber material.
Example: N0300 8-009.
8-XXX Sizes
Parker ID Tol. R Tol. A Tol. Width Tol.
No. In. ± ±.010 Ref. In. ± In. ±
8-XXX Sizes
Parker ID Tol. R Tol. A Tol. Width Tol.
No. In. ± ±.010 Ref. In. ± In. ±
8-XXX Sizes
Parker ID Tol. R Tol. A Tol. Width Tol.
No. In. ± ±.010 Ref. In. ± In. ±
8-XXX Sizes
Parker ID Tol. R Tol. A Tol. Width Tol.
No. In. ± ±.010 Ref. In. ± In. ±
8-XXX Sizes
Parker ID Tol. R Tol. A Tol. Width Tol.
No. In. ± ±.010 Ref. In. ± In. ±
8-XXX Sizes
Parker ID Tol. R Tol. A Tol. Width Tol.
No. In. ± ±.010 Ref. In. ± In. ±
8-XXX Sizes
Parker ID Tol. R Tol. A Tol. Width Tol.
No. In. ± ±.010 Ref. In. ± In. ±
430 5.176
431 5.301
432 5.426
433 5.551
8-XXX Sizes
Parker ID Tol. R Tol. A Tol. Width Tol.
No. In. ± ±.010 Ref. In. ± In. ±
General
Notes
SIZING CHARTS
General
Notes
This network - and the global sales and engineering support it provides -
means that customers can always get quality products when and where they
need them. It also means that sound advice from Parker sealing experts is
never far away.
Parker O-Ring
Division’s manufacturing
facilities span four continents and nine countries.
Some of these facilities include:
Sao Paulo (Brazil) Orillia, ONT (Canada) Shanghai (China) Pleidelsheim (Germany)