Professional Documents
Culture Documents
Procurement Price Adjustment
Procurement Price Adjustment
The views expressed in this publication are those of the authors and do not necessarily reflect
the views and policies of the Asian Development Bank (ADB) or its Board of Governors or
the governments they represent.
ADB does not guarantee the accuracy of the data included in this publication and accepts no
responsibility for any consequence of their use. The mention of specific companies or products
of manufacturers does not imply that they are endorsed or recommended by ADB in preference
to others of a similar nature that are not mentioned.
This CC license does not apply to non-ADB copyright materials in this publication. If the material
is attributed to another source, please contact the copyright owner or publisher of that source
for permission to reproduce it. ADB cannot be held liable for any claims that arise as a result
of your use of the material.
Notes:
In this publication, “$” refers to United States dollars and “T” refers to Kazakhstan tenge.
Corrigenda to ADB publications may be found at http://www.adb.org/publications/corrigenda.
Abbreviationsviii
Executive Summary ix
I. Introduction 1
IV. Contract Management 10
Table
FIGURES
BOXES
1. Price Escalation 1
In April 2017, the Asian Development Bank (ADB) approved its new procurement
framework, the ADB Procurement Policy: Goods, Works, Nonconsulting and
Consulting Services (2017, as amended from time to time); and the Procurement
Regulations for ADB Borrowers: Goods, Works, Nonconsulting and Consulting
Services (2017, as amended from time to time). These replace the former Guidelines
on the Use of Consultants (2013, as amended from time to time) and Procurement
Guidelines (2015, as amended from time to time). The procurement policy and the
procurement regulations address the procurement activities of project executing
agencies and implementing agencies on projects financed in whole or in part by a
loan or grant from ADB, or by ADB-administered funds. ADB designed the 2017
procurement policy to deliver significant benefits and flexibility throughout the
project procurement cycle, as well as to improve project delivery through a renewed
focus on the concepts of quality, value for money (VFM), and fitness for purpose.
Tra n s p a re n c y
Value for Money
The effective, efficient, and economic use of resources,
which requires an evaluation of relevant costs and benefits along
with an assessment of risks, nonprice attributes, and/or total cost
of ownership as appropriate
Fairness
Time
Time is an important element of VFM. When a project is delivered promptly or when a
process is completed rapidly, greater value is created for all stakeholders. For example, a
road project completed early provides economic benefit, security, or other value to the
community it serves. It increases the return on investment to the executing agency and
accelerates the project and payment cycle to the successful bidder. Likewise, a project
delivered late loses significant value.
Objective
This guidance note is intended to assist readers by elaborating on and explaining
ADB’s 2017 procurement policy and procurement regulations for borrowers
(including grant recipients).
This note identifies additional information for the reader to consider when applying ADB’s
procurement policy and procurement regulations to their circumstances.
Living Document
This guidance note is intended to be a living document and will be revised as required.
Be sure to check the ADB Business Center website for the latest version and updates,
https://www.adb.org/business/main.
The Reader
In many circumstances, readers are expected to use this guidance note in a manner unique
to their needs. For consistency throughout the suite of guidance notes, the following
assumption is made about the reader:
The reader is a professional involved in activities financed in whole or in part by an ADB loan
or grant, or by ADB-administered funds.
FAQs
Frequently asked questions, clarifications, examples, additional information, links to training,
and other useful resources will be made available on the ADB website.
Be sure to check the ADB Business Center website for more information,
https://www.adb.org/business/main.
In the event of any discrepancy between this guidance note and the procurement
regulations, the latter will prevail. The financing agreement governs the legal relationships
between the borrower and ADB. The rights and obligations between the borrower and the
provider of goods, works, or services are governed by the specific procurement document
issued by the borrower and by the contract signed between the borrower and the provider,
and not by this guidance note.
viii
Abbreviations
Executive Summary
Improve Quality
• Explain various approaches and formulas for applying price adjustment,
depending on the nature and scope of the contract.
• Mitigate risks related to price escalation during contract execution.
1.1 This guidance note intends to aid users with planning and applying
price adjustment provisions in contracts financed in whole or in part by an Asian
Development Bank (ADB) loan or grant, or by ADB-administered funds. Price
adjustment is a modification made to the overall price of a contract to take account
of legitimate changes in the costs of performing the contract. It is a mechanism
to protect both buyers and sellers from unforeseeable input price fluctuations.
This guidance note discusses price adjustment provisions for goods, works, and
plant contracts.1 Price adjustment provisions are planned during the procurement
planning and bid preparation stages of the ADB procurement cycle, and are used as
necessary during the contract implementation stage (Figure 1).
1.3 It may be tempting for borrowers to assign the risk of input price
fluctuation to contractors, but this usually comes at a higher overall cost for
two reasons. First, contractors will build in price contingencies for input price
increases over the life of a contract. Over time, this will result in higher average
prices being paid for the same works. Second, a competitive bidding process will
reward the bidder that takes the highest risk, significantly increasing the risk of
nonperformance and default should input prices rise significantly.
1
Price adjustment provisions may also be used in consulting and nonconsulting service contracts,
to adjust remuneration rates for the effects of inflation for contracts with duration of 18 months
or more. For consulting service contracts, these provisions are defined in ADB’s standard request
for proposals and should normally be based on the index of the country of the payment currency,
regardless of the consultant’s nationality, residence, or location of the services. Nonconsulting
service contracts may also adapt these provisions.
2
In this guidance note, the term “contractor” will be used to collectively designate a works or plant
contractor, or a supplier of goods.
2 Price Adjustment
Country Partnership
Strategy
Country and Sector/Agency
Procurement Risk Assessment
y
Tran
Procurement Planning
Efficiency
sparency
Contract Management Project Procurement Risk
Contract Management Plan
CYCLE Assessment
Project Administration Manual
M alu e s
V
ne
s
o n fo r
ey Fa i r
Contract Award Bidding
Bidding Documents
Bid Evaluation
Evaluation Reports
1.4 Bidders will factor in the risk of price escalation when preparing their bid,
depending on the contract specified in the bidding document:
1.5 A fixed-price contract may give certainty to budget and simplify contract
management. However, it may lead to other problems since it requires bidders
to estimate and bear the financial risks associated with price escalations. If the
estimates are too high or events do not materialize, the borrower will pay a steep
price that may affect the economy and efficiency of the contract. In the worst case,
Introduction 3
it may mean that the bid price is then above budget and may lead to a reduction
in the requirements or rebidding. If the estimates are too low, it may appear as an
abnormally low bid and disrupt contract execution.
2.4 The price of some components may still vary significantly within time
periods shorter than 18 months. These usually include bitumen, fuel, cement,
3
See Appendix 3, para. 47, of the procurement regulations.
Deciding to Apply Price Adjustment 5
reinforced steel, etc. Where the price of such components fluctuates over short
periods of time, it is also appropriate to include a price adjustment clause, whatever
the length of the contract may be.
(i) simple supply contracts (i.e., not involving components that are
usually affected by escalating or fluctuating prices) with short delivery
periods;
(ii) the procurement of certain types of equipment where normal
commercial practice requires bidders to submit firm prices regardless
of the delivery time, which may be the case for
(a) engineering, procurement, and construction contracting
arrangements; and
(b) fixed-price contracts that are common in projects financed by
private sector financiers, who are generally reluctant to accept the
risk of cost overruns, as it increases credit risk rating and reduces
financial viability of the project; and
(iii) contracts for the supply, installation, and construction of facilities
wherein the value of the permanent works represents the major
part of the estimated cost of the contract. All major equipment is
usually supplied from fixed production lines; thus, an experienced
manufacturer should be able to mitigate the risk of price fluctuations.
2.7 Where the value of the permanent works does not represent the major
part of the estimated cost of the contract, the borrower must assess the need for
and the scope of price adjustment.
III. Applying the Price Adjustment
Formulas
3.3 Contracts for major and complex works and plant may also comprise
several sections, each of which can be distinguished by nature, location, access,
timing, or any other special characteristics which may cause different methods
of construction, phasing of the works, or considerations of cost. General items
common to all parts of the works may be grouped as a separate section in the bill of
quantities. For such contracts, a different price adjustment formula with different
cost components and weights may be required for each group or section.
The default nonadjustable portion used in the ADB User’s Guide to Procurement of
Works: Standard Bidding Document (2018) is 0.15, but the actual figure will depend
on the calculation made above and may vary between 0.1 and 0.2.
3.6 This element of the formula is not subject to price escalation and is not
adjusted. Appendix 3 gives further details of what is included in this component.
3.9 Bidders are generally best-placed to determine the weight for each
cost element in the works, since the weight of each cost element has the bidder’s
visibility of the respective input costs, while the borrower does not. The choice of
construction method will significantly affect the fixed and adjustable proportions
of the price adjustment formula. For example, the use of heavy-duty scraper
equipment instead of wheelbarrows for execution of earthworks will differently
affect costs of labor and fuel (Box 4).
Box 4
Choice of Construction Method Affects the Price Adjustment
An example of how the choice of construction method may affect the weighting of labor
and equipment in a contract can be made with reference to the execution of earthworks.
These can be carried out by different construction methods involving different types and
amount of equipment (e.g., heavy-duty scrapers through to wheelbarrows). The weight of
the labor cost element in the works will be negligible where the contractor chooses to use
heavy-duty scrapers, for instance, and will become a major cost element where the contractor
chooses to use wheelbarrows. The weight of materials can also be affected by the contractor’s
construction methodology (e.g., cost of fuel required for the execution of the works and
materials’ wastage ratios which vary among different contractors).
Source: Asian Development Bank.
8 Price Adjustment
3.10 Under certain circumstances (e.g., para. 3.15), the borrower may set a
range of acceptable weights for each cost element that will be subject to price
adjustment based on the construction methodologies likely to be used for
performing all major construction activities under the contract.
3.11 The price adjustment parameters proposed by the bidders shall not
be considered during bid evaluation. This includes the estimated effect of price
adjustment during execution of the contract. Hence, bid evaluation shall be solely
based on the bid’s base price.
3.12 Although price adjustment is not part of bid evaluation, the borrower
should evaluate all weights and sources of price indexes proposed by the bidder
submitting the lowest evaluated substantially responsive bid. If the bidder enters
a weight determined to be significantly outside of the borrower’s estimate or
indicates sources of price indexes the borrower deems irrelevant, the borrower
must seek clarification and require the bidder to substantiate the adjustable
cost items and coefficients, breakdown of the bidder’s unit rates, and the
indexes and source(s) of indexes included in its bid prior to contract award.
Such substantiation may include the source of the materials, a bidder’s existing
commercial arrangements for any of the adjustable cost components, and
proposed construction methods. If the bidder fails to provide such substantiation
or to demonstrate consistency of its proposed weights, sources of price indexes
with the construction methodology, and other arrangements, the borrower may
request the bidder to revise the data and the proposed parameters for the price
adjustment formula.
3.14 Indexes are used to show increases in any of these elements that affect
the price of the identified component. Potential indexes include
(i) Local price indexes, applicable where the site is located, such as retail
price index, consumer price index, minimum wages or labor rates,
regulated prices, etc., provided by, for example, the state statistics
agency. The use of these indexes may be mandated at the national
level.
(ii) International indexes, sourced from reputable organizations and
widely used by the business community. The sources of indexes
must also be related to the source of foreign inputs and currencies of
payment.
Applying the Price Adjustment Formulas 9
3.16 For the portion of contracts to be paid in foreign currency, indexes should
be proposed by bidders and they will also specify in their bids the major cost
items subject to price adjustment. If required by the borrower, bidders need to
substantiate their coefficients, indexes, and source(s) of indexes included in its bid
prior to contract award.
IV. Contract Management
A. Payment
4.2 In unit price or admeasurement contracts, price adjustment amounts are
generally calculated monthly starting from contract effectiveness. Where indexes
are not published monthly, e.g., on a quarterly or semiannual basis, adjustments will
need to be made to account for the index figures for the corresponding months.
B. Supervision
4.4 The borrower should ensure that the bidding documents and the
contract include clear and complete provisions on price adjustment. Under
some circumstances, such as in places where price adjustment has become an
issue in the past, it may be useful for the borrower to provide a summary of price
adjustment data/coefficients submitted by the bidders in the bid evaluation report.
C. Risks
4.5 The use of price adjustment may present a risk of corruption and fraud
during contract management. Unless price adjustment formulas and indexes are set
out clearly and objectively, and properly supervised, there is a risk of manipulation
and abuse that could lead to unwarranted additional payments to contractors. Price
adjustments need to be applied with care and skill, and be properly supervised.
Contract Management 11
4.6 In the example provided in Box 5, the locally published price index for the
aggregate can only apply to price adjustment under the contract if the contractor’s
supply arrangements are limited to situation (i). The local price index for aggregate
will not be appropriate for situation (ii) and would be entirely irrelevant for
situation (iii).
4.7 Even where price escalation provisions are properly established and
applied, there remains a risk of manipulation. For instance, a contractor may
influence price indexes published by the state statistics agency in the region where
the project site is located (local price index), for any materials which the contractor
requires in bulk and which do not originate within the region.
Box 5
Example of Sourcing for Aggregate
Where roadworks require a substantial amount of aggregate, the contractor may supply the
required quantity through arrangements including
(i) the purchase of the entire stock of aggregate available within the project site region and
thereby influence locally published price indexes;
(ii) sourcing part or all of the aggregate required from outside of the project site region,
in which case the local price indexes will become irrelevant; and
(iii) acquiring a license for developing a new quarry in the project site area to meet its
demand under the contract, in which case the cost of the aggregate to the contractor
will become subject to the price indexes not relating to the cost of the aggregate in
the region.
Source: Asian Development Bank.
4.9 Occasionally, it may be difficult to identify the price index that would
be suitable for a cost element. In such cases, the borrower may have no option
but to resort to using a proxy index. Price indexes for cement, for instance, can be
remarkably volatile as these are distorted by the wholesale and retail prices and
have a seasonal nature. Wherever possible, contractors will attempt to fix the
cost of cement by entering long-term supply contracts with the existing cement
manufacturers. However, this is possible only where the contractor requires a
substantial amount of cement, e.g., execution of concrete pavement works. Where
the quantity of the required cement does not enable the contractor to enter such
contracts, the contractor will endeavor to retain a specialist subcontractor and
12 Price Adjustment
pass the risk of price inflation to such subcontractor. Regardless of the contractor’s
supply arrangements, if there is an unforeseen price increase of the energy source
(e.g., gas) required to produce cement, the cost of cement is likely to increase.
Borrowers may consider using the price index for gas as a proxy index for adjusting
the cost of cement under the contract.
Appendix 1: Examples of Price
Adjustment Formulas
A1.1 Table A1 gives examples of price adjustment formulas from the standard
bidding documents (SBD) of the Asian Development Bank (ADB) for goods, works,
and plant.
“Pn” is the adjustment multiplier to be applied to the estimated contract value in the relevant
currency of the work carried out in period “n,” this period being a =
month, unless otherwise
stated in the contract data.
“a” (default value is set at 0.15) is a fixed coefficient, stated in the relevant table of adjustment
data, representing the nonadjustable portion in contractual payments.
“b”, “c”, “d”, … are coefficients representing the estimated proportion of each cost element
related to the execution of the works, as stated in the relevant table of adjustment data. Such
tabulated cost elements may be indicative of resources such as labor, equipment, and materials.
(a + b + c + d + … = 1)
“Ln”, “En”, “Mn”, … are the current cost indexes or reference prices for period “n,” expressed
in the relevant currency of payment, each of which is applicable to the relevant tabulated cost
element on the date 49 days prior to the last day of the period (to which the payment certificate
relates).
Formula
“Lo”, “Eo”, “Mo”, … are the base cost indexes or reference prices, expressed in the relevant
currency of payment, each of which is applicable to the relevant tabulated cost element on the
base date.b
Small MDB
GCC 54.1 =
Worksc Harmonizedd
Pc is the adjustment factor for the portion of the contract price payable in a specific currency
“c.”
Ac and Bc are coefficients specified in the particular conditions of contract, representing the
nonadjustable (usually 0.10 to 0.20) and adjustable portions, respectively, of the contract price
payable in that specific currency “c.” Ac + Bc = 1.
Imc is a consolidated index prevailing at the end of the month being invoiced and Ioc is the
same consolidated index prevailing 28 days before bid opening for inputs payable; both in the
specific currency “c.”
continued on next page
Formula
Formula
14 Appendix 1
Table A1 continued
MDB
Goods GCC 15.2
Harmonizedf
1 1
1 0
Where:
P0: Contract base
⁄ price.
UL1 L1 P1 D1 S1 C1
1 × 30 + 20 + 14 +5 + 11 + 15 +5
UL L P D S C
P1: Revised adjusted contract price. UL1 L1 P1 D1
1 ⁄ × 30 + 26 + 14 + 10 + 20
a: Fixed portion (30%). UL L P D
b: Steel component (70% for towers, 5% for aluminum conductor steel-reinforced cable
conductor, 70% for shield wire, 55% for optical ground wire).
c: Aluminum or aluminum alloy component (70% for all aluminum alloy conductor, 65% for
aluminum conductor steel-reinforced cable conductor, 15% for optical ground wire).
S0/S1: Base/revised rate of steel ($ per metric ton) prevailing 28 days prior to the date of bid
opening or 60 days prior to the date of shipment/delivery by the manufacturer of respective lot,
based on London Metal Exchange cash (official) rate applicable for all grades of steel or local steel
mills billet rate (whichever is applicable).
A0: Base rate of aluminum (for aluminum conductor steel-reinforced cable conductor) or
aluminum alloy (for all aluminum alloy conductor) ($ per metric ton) prevailing 28 days prior to
the date of bid opening based on London Metal Exchange cash (official) rate.
A1: Revised rate of aluminum ($ per metric ton) prevailing 60 days prior to the date of shipment/
delivery by the manufacturer of respective lot.
16 Appendix 2
1 1
1 0
Price adjustment formula for schedule no. 3: installation and other services
1 1
1 0
For foundation works:
UL1 L1 P1 D1 S1 C1
1 ⁄ × 30 + 20 + 14 +5 + 11 + 15 +5
UL PL D S C
UL1 L1 P1 D1
UL1 L1 ⁄ P1 × 30 D + 26 S + 14C + 10 + 20
1 ⁄ For
× installation
30 + 20 works (erection
1
+ 14 + 5 and + stringing):
11 1 + 15 UL1 + 5 1 L P D
UL L P D S C
UL L P D
1 ⁄ × 30 + 26 1 + 14 1 + 10 1 + 20 1
UL L P D
Where:
A0: Revised amount for payment.
A: Amount payable to the contractor at the rates entered in price schedules, for the work executed
after the date of change in the rates or prices of labor or materials mentioned in this section.
UL/UL1: The basic/revised minimum monthly wage rate for unskilled labor 28 days prior to the
date of bid opening/the start of execution month as stated in monthly local statistical bulletin.
L/L1: The basic/revised minimum monthly wage rate for skilled labor (mason) 28 days prior to the
date of bid opening/the start of execution month as stated in monthly local statistical bulletin.
P/P1: The basic revised rate of premium motor gasoline (for sale through retail outlets), maximum
ex-depot sales price, 28 days prior to the date of bid opening/the start of execution month.
D/D1: The basic/revised rate of light diesel oil, maximum ex-depot sales price, 28 days prior to the
date of bid opening/the start of execution month.
S/S1: The basic/revised rate of reinforcing steel iron bars—half-inch round mild steel bars, 28 days
prior to the date of bid opening/the start of execution month, as stated in monthly local statistical
bulletin.
C/C1: The basic/revised rate of ordinary Portland cement or sulphate resistant cement, 28 days
prior to the date of bid opening/the start of execution month, as stated in monthly local statistical
bulletin.
Appendix 2 17
Steel reinforcement 84,000 per ton High-speed diesel 109.34 per liter
(grade 60)
Bitumen (bulked) 80,000 per ton Diesel cost taken at 50.13% of equipment
input as derived in owning and/or operating
cost given in local standard rate
Cement 550 per bag Labor input Local standard rate
Index
Source of Adjustment
Items Coefficient Base Current
Index Multiplier
(Lo) (Ln)
1 2 3 4=1x(3/2)
Nonadjustable 0.1500 n/a n/a 0.15000
Labor A 0.3400 84.8 85.3 0.34200
Aggregates B 0.0425 98.1 117.7 0.05099
Bitumen B 0.0425 102.9 113.5 0.04688
Fuel (Diesel) C 0.0850 282.1 283.4 0.08539
Steel 0.0850 0.09371
B 328.8 362.5
Reinforcement
Galvanized Steel B 0.0850 330.1 363.4 0.09357
Cement B 0.0850 259.5 243.2 0.07966
Timber B 0.0850 128.1 128.1 0.08500
1.0000 Pn 1.02720
Permissible range
Payment in Payment in
Range Local Foreign
Coefficient Description (%) Currency Currency
a Fixed 20 20
b Labor
Local 6–10 7
Expatriate 3–7 N/A
c Fuel 12–18 18
d Cement 4–8 7 (to be filled by
bidder)
e Reinforcing steel 6–10 8
f Contractor’s equipment 11–22 20
and plant
g Miscellaneous material
Local 5–9 6
Imported 14–18 14
Total 100
Current
7,000 97.66 103.46 614.96 8,500 71,750 204.20 164.98 217.40
Mar Index
Factor 8.17 24.11 10.63 9.22 21.42 7.37 14.68 20.00 115.58 32,861,622 43,815,496 50,643,595 6,828,099
Current
7,000 105.69 108.16 646.49 8,500 74,750 204.50 168.00 218.30
2 Apr Index
Factor 8.17 25.35 10.63 9.61 21.45 7.50 14.74 20.00 117.43 32,861,622 43,815,496 51,453,698 7,638,202
Current
7,000 103.36 107.00 638.36 9,000 74,750 205.10 169.93 219.10
May Index
Factor 8.17 25.03 11.25 9.61 21.51 7.59 14.79 20.00 117.94 32,861,622 43,815,496 51,676,876 7,861,380
Appendix 2
21
22 Appendix 2
MS MS
Monthly adjusted adjusted
Oil Oil Statements ($) (T)
Date Price Pn Price Pn’ (MS) Pn x MS Pn’ x MS ∆
(2017) ($) ($) T/$ (T) (T) ($) (1) (2) (2)–(1)
1-Jan 53.78 327.26 17,599
1-Feb 53.88 0.998 320.22 17,253 1.018 120,000 119,800 122,169 2,369
1-Mar 53.82 0.999 312.03 16,793 1.043 150,000 149,900 156,483 6,583
1-Apr 50.56 1.057 314.04 15,878 1.098 120,000 126,878 131,712 4,833
1-May 48.87 1.090 313.07 15,299 1.135 160,000 174,468 181,648 7,180
1-Jun 48.32 1.102 309.28 14,944 1.160 200,000 220,339 231,982 11,643
1-Jul 47.08 1.128 318.88 15,012 1.155 250,000 282,020 288,774 6,754
1-Aug 49.19 1.084 324.78 15,975 1.091 180,000 195,116 196,467 1,350
1-Sep 47.30 1.123 334.14 15,804 1.102 160,000 179,728 176,353 -3,375
1-Oct 50.60 1.057 338.89 17,147 1.024 280,000 295,837 286,642 -9,195
1-Nov 54.29 0.992 332.92 18,074 0.976 320,000 317,295 312,439 -4,856
1-Dec 58.36 0.929 328.42 19,166 0.926 320,000 297,398 296,454 -944
Total ∆ 22,343
Appendix 2 23
Adjustment
Figure Factor
A2: Adjustment for
Factor forOil
Oil
1.200
1.150
Adjustment Multiplier
1.100
1.050
1.000
0.950
0.900
Jan-17 Feb-17 Mar-17 Apr-17 May-17 Jun-17 Jul-17 Aug-17 Sep-17 Oct-17 Nov-17
Date (Month-Year)
$ T (Kazakhstan tenge)
A. Contingency
A3.2 If it is not practical for a contractor to estimate accurately the actual cost
of the works at the time of bidding, the contractor will incorporate a contingency
into its bid price covering both physical and price contingencies associated with
the execution of the works. Contingency is usually determined based on the
contractor’s assessment of the extent of the risk associated with performing the
contract, which may be influenced by the contractor’s general experience and
knowledge of the borrower’s (or grant recipient’s) country and market. Like the
contractors, borrowers will also incorporate a contingency into their estimate of
the cost of the works during preparation of the detailed engineering designs for the
project. The corresponding estimate, usually 5% of the estimated cost of the works,
can be used for determining the nonadjustable portion as confirmed by the design
contractor responsible for preparing the detailed engineering designs.
B. Overheads
A3.3 The contractor will incorporate its overheads into its bid price based on
its estimate of the cost of carrying out its operations on site, i.e., site overhead
expenses, and as a company, i.e., general overhead expenses. Overheads
are determined, controlled, and managed solely by the contractor. Different
contractors use a different basis for determining their overheads. Some contractors
compute their overheads specifically for items of the works, e.g., labor, materials,
equipment, or subcontracted works. Others will apply a fixed percentage overhead
applicable to all items of the works. Contractors’ overheads may vary within
substantial margins. It is also not unusual for contractors to waive part of their
general overhead expenses and offer price discounts on their account, based on
Appendix 3 25
C. Profit
A3.4 The contractor will incorporate a profit margin into its bid price that
will reflect its marketing strategy, the interest generated by the project, and other
considerations. Multilateral development banks (MDBs) require that the term
“profit” shall be defined as “one twentieth (5%) of the cost.”4 This definition is
provided in the International Federation of Consulting Engineers (FIDIC) MDB
harmonized construction contract (2010) with the expression “cost plus profit.”
This rate can also be used for determining the nonadjustable portion.
4
FIDIC. 2010. Conditions of Contract for Construction: Multilateral Development Bank Harmonized
Edition. General Conditions. Sub-Clause 1.2, Interpretation. Geneva.
26 Appendix 3
and equipment, the cost of its ownership will be included in the contractor’s
overheads, which are controllable by the contractor. Wherever possible, contractors
will also strive to negotiate materials supply contracts based on fixed-price
arrangements. Contractors may also subcontract the execution of parts of the
works with specialist subcontractors on a fixed-price basis.
A3.7 The borrower should carry out a market assessment and identify those
major cost elements of the works which the contractor will be able to control
or otherwise incorporate reasonable contingencies into its bid price. Such an
assessment may include statistical data on the price fluctuation for the major cost
elements of the works over the last 5-year period. Should the data show that the
actual price fluctuation for a cost element has been stable over this period, and,
hence, is predictable, the borrower may consider including such a cost component
into the nonadjustable portion of the contract.
Price Adjustment
Guidance Note on Procurement
ADB’s vision is an Asia and Pacific region free of poverty. Its mission is to help its
developing member countries reduce poverty and improve the quality of life of their
people. Despite the region’s many successes, it remains home to a large share of the
world’s poor. ADB is committed to reducing poverty through inclusive economic
growth, environmentally sustainable growth, and regional integration.
Based in Manila, ADB is owned by 67 members, including 48 from the region. Its main
instruments for helping its developing member countries are policy dialogue, loans,
equity investments, guarantees, grants, and technical assistance.