Elements of Spiral Curve
Elements of Spiral Curve
Spirals are used to overcome the abrupt change in curvature and superelevation that
occurs between tangent and circular curve. The spiral curve is used to gradually change
the curvature and superelevation of the road, thus called transition curve.
TS = Tangent to spiral
SC = Spiral to curve
CS = Curve to spiral
ST = Spiral to tangent
LT = Long tangent
ST = Short tangent
R = Radius of simple curve
Ts = Spiral tangent distance
Tc = Circular curve tangent
L = Length of spiral from TS to any point along the spiral
Ls = Length of spiral
PI = Point of intersection
I = Angle of intersection
Ic = Angle of intersection of the simple curve
p = Length of throw or the distance from tangent that the circular curve has been offset
X = Offset distance (right angle distance) from tangent to any point on the spiral
Xc = Offset distance (right angle distance) from tangent to SC
Y = Distance along tangent to any point on the spiral
Yc = Distance along tangent from TS to point at right angle to SC
Es = External distance of the simple curve
θ = Spiral angle from tangent to any point on the spiral
θs = Spiral angle from tangent to SC
i = Deflection angle from TS to any point on the spiral, it is proportional to the square of its
distance
is = Deflection angle from TS to SC
D = Degree of spiral curve at any point
Dc = Degree of simple curve