Tree Terminology
Tree Terminology
Example
Terminology
In a tree data structure, we use the following terminology...
1. Root
In a tree data structure, the first node is called as Root Node. Every
tree must have root node. We can say that root node is the origin of
tree data structure. In any tree, there must be only one root node. We
never have multiple root nodes in a tree.
2. Edge
In a tree data structure, the connecting link between any two nodes is
called as EDGE. In a tree with 'N' number of nodes there will be a
maximum of 'N-1' number of edges.
3. Parent
In a tree data structure, the node which is predecessor (ancestor) of
any node is called as PARENT NODE. In simple words, the node which
has branch from it to any other node is called as parent node. Parent
node can also be defined as "The node which has child / children".
4. Child
In a tree data structure, the node which is descendant (inheritor) of
any node is called as CHILD Node. In simple words, the node which
has a link from its parent node is called as child node. In a tree, any
parent node can have any number of child nodes. In a tree, all the
nodes except root are child nodes.
5. Siblings
In a tree data structure, nodes which belong to same Parent are called
as SIBLINGS. In simple words, the nodes with same parent are called
as Sibling nodes.
6. Leaf
In a tree data structure, the node which does not have a child is called
as LEAF Node. In simple words, a leaf is a node with no child.
In a tree data structure, the leaf nodes are also called as External
Nodes. External node is also a node with no child. In a tree, leaf node
is also called as 'Terminal' node.
7. Internal Nodes
In a tree data structure, the node which has at least one child is called
as INTERNAL Node. In simple words, an internal node is a node with
at least one child.
In a tree data structure, nodes other than leaf nodes are called
as Internal Nodes. The root node is also said to be Internal Node if
the tree has more than one node. Internal nodes are also called as
'Non-Terminal' nodes.
8. Degree
In a tree data structure, the total number of children of a node is
called as DEGREE of that Node. In simple words, the Degree of a node
is total number of children it has. The highest degree of a node among
all the nodes in a tree is called as 'Degree of Tree'
9. Level
In a tree data structure, the root node is said to be at Level 0 and the
children of root node are at Level 1 and the children of the nodes
which are at Level 1 will be at Level 2 and so on... In simple words, in
a tree each step from top to bottom is called as a Level and the Level
count starts with '0' and incremented by one at each level (Step).
10. Height
In a tree data structure, the total number of edges from leaf node to a
particular node in the longest path is called as HEIGHT of that
Node. In a tree, height of the root node is said to be height of the
tree. In a tree, height of all leaf nodes is '0'.
11. Depth
In a tree data structure, the total number of edges from root node to
a particular node is called as DEPTH of that Node. In a tree, the total
number of edges from root node to a leaf node in the longest path is
said to be Depth of the tree. In simple words, the highest depth of
any leaf node in a tree is said to be depth of that tree. In a
tree, depth of the root node is '0'.
12. Path
In a tree data structure, the sequence of Nodes and Edges from one
node to another node is called as PATH between those two
Nodes. Length of a Path is total number of nodes in that path. In
below example the path A - B - E - J has length 4.
Tree Representations
A tree data structure can be represented in two methods. Those
methods are as follows...
1. List Representation
2. Left Child - Right Sibling Representation
1. List Representation
In this representation, we use two types of nodes one for representing
the node with data and another for representing only references. We
start with a node with data from root node in the tree. Then it is
linked to an internal node through a reference node and is linked to
any other node directly. This process repeats for all the nodes in the
tree.
In this representation, every node's data field stores the actual value
of that node. If that node has left child, then left reference field
stores the address of that left child node otherwise that field stores
NULL. If that node has right sibling then right reference field stores
the address of right sibling node otherwise that field stores NULL.
The above tree example can be represented using Left Child - Right
Sibling representation as follows...
Binary Tree
In a normal tree, every node can have any number of children. Binary
tree is a special type of tree data structure in which every node can
have a maximum of 2 children. One is known as left child and the
other is known as right child.
Example
There are different types of binary trees and they are...
A binary tree in which every node has either two or zero number
of children is called Strictly Binary Tree
Strictly binary tree is also called as Full Binary Tree or Proper Binary
Tree or 2-Tree
Example
In above figure, a normal binary tree is converted into full binary tree
by adding dummy nodes
1. Array Representation
2. Linked List Representation
1. Array Representation
In array representation of binary tree, we use a one dimensional array
(1-D array) to represent a binary tree.
Consider the above example of binary tree and it is represented as
follows...
1. In - Order Traversal
2. Pre - Order Traversal
3. Post - Order Traversal
In the above example of binary tree, first we try to visit left child of
root node 'A', but A's left child is a root node for left sub-tree. so we
try to visit its (B's) left child 'D' and again D is a root for sub-tree with
nodes D, I and J. So we try to visit its left child 'I' and it is the left
most child. So first we visit 'I' then go for its root node 'D' and later we
visit D's right child 'J'. With this we have completed the left part of
node B. Then visit 'B' and next B's right child 'F' is visited. With this we
have completed left part of node A. Then visit root node 'A'. With this
we have completed left and root parts of node A. Then we go for right
part of the node A. In right of A again there is a sub-tree with root C.
So go for left child of C and again it is a sub-tree with root G. But G
does not have left part so we visit 'G' and then visit G's right child K.
With this we have completed the left part of node C. Then visit root
node 'C' and next visit C's right child 'H' which is the right most child in
the tree so we stop the process.
I-D-J-B-F-A-G-K-C-H
2. Pre - Order Traversal (root - leftChild -
rightChild)
In Pre-Order traversal, the root node is visited before left child and
right child nodes. In this traversal, the root node is visited first, then
its left child and later its right child. This pre-order traversal is
applicable for every root node of all sub-trees in the tree.
In the above example of binary tree, first we visit root node 'A' then
visit its left child 'B' which is a root for D and F. So we visit B's left
child 'D' and again D is a root for I and J. So we visit D's left
child 'I' which is the left most child. So next we go for visiting D's right
child 'J'. With this we have completed root, left and right parts of
node D and root, left parts of node B. Next visit B's right child 'F'. With
this we have completed root and left parts of node A. So we go for A's
right child 'C' which is a root node for G and H. After visiting C, we go
for its left child 'G' which is a root for node K. So next we visit left of
G, but it does not have left child so we go for G's right child 'K'. With
this we have completed node C's root and left parts. Next visit C's
right child 'H' which is the right most child in the tree. So we stop the
process.
A-B-D-I-J-F-C-G-K-H
2. Post -Order Traversal (leftChild - rightChild -
root)
In Post-Order traversal, the root node is visited after left child and
right child. In this traversal, left child node is visited first, then its
right child and then its root node. This is recursively performed until
the right most node visited.
I-J-D-F-B-K-G-H-C-A
Threaded Binary Tree is also a binary tree in which all left child
pointers that are NULL (in Linked list representation) points to its
in-order predecessor, and all right child pointers that are NULL (in
Linked list representation) points to its in-order successor.
To convert above binary tree into threaded binary tree, first find the
in-order traversal of that tree...
H-D-I-B-E-A-F-J-C-G
When we represent above binary tree using linked list representation,
nodes H, I, E, F, J and G left child pointers are NULL. This NULL is
replaced by address of its in-order predecessor, respectively (I to D, E
to B, F to A, J to F and G to C), but here the node H does not have its
in-order predecessor, so it points to the root node A. And nodes H, I,
E, J and G right child pointers are NULL. This NULL pointers are
replaced by address of its in-order successor, respectively (H to D, I to
B, E to A, and J to C), but here the node G does not have its in-order
successor, so it points to the root node A.
Above example binary tree become as follows after converting into
threaded binary tree.