Professional Documents
Culture Documents
Water Tech. v. Kokido Dev. - Markman Order
Water Tech. v. Kokido Dev. - Markman Order
MARKMAN ORDER
This matter is before the Court on the parties’ cross motions for the construction
of certain patent claim terms, pursuant to Markman v. Westview Instruments, Inc., 517
U.S. 370 (1996). For the reasons set forth below, the parties’ motions will be granted in
BACKGROUND
This patent case is about swimming pool vacuum cleaners. Plaintiffs are Water
Technology, LLC and Water Tech. Corp. (“Water Tech”), maker of the Pool Blaster,
Catfish, Leaf Vac, and Aqua Broom pool vacuums. Defendants are Kokido Development
Limited, maker of Telsa and Vektro pool vacuums, and retailer Menard, Inc. Water Tech
filed a complaint asserting that Kokido’s products, sold by Menard, infringe five Water
infringement and invalidity. Water Tech dismissed its infringement claims with respect
-1-
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 2 of 40 PageID #: 5985
to two patents. The remaining patents in suit are: (1) U.S. Patent No. 6,939,460, titled
Portable Electric Pool Cleaner, issued September 6, 2005 (the ‘460); (2) U.S. Patent No.
7,636,975, titled Pool Vacuum, issued December 29, 2009 (the ‘975); and (3) U.S.
Design Patent No. D556,396, titled Pool Vacuum, issued November 27, 2007 (the
‘D396). Patents ‘460 and ‘975 are utility patents for hand-held, battery-powered,
submersible pool cleaners. The ‘D396 is a design patent for a particular ornamental
design for a pool cleaner. Kokido’s accused products are also hand-held, battery-
The parties have submitted claim construction briefs and a joint claim construction
chart. On November 28, 2018, the Court held a hearing at which the parties presented
arguments and Water Tech offered the expert witness testimony of Mr. David Peterson.
As discussed below, Defendants seek construction of seven claim terms of the ‘460 and
six terms of the ‘975. Plaintiffs submit that the Court need only construe three terms in
the ‘460 and two in the ‘975, leaving the rest to their plain meaning.
A district court need not construe every claim term challenged by a party. Finjan,
Inc. v. Secure Computing Corp., 626 F.3d 1197, 1206–07 (Fed. Cir. 2010). Where the
plain and ordinary meaning of the claim term resolves the parties’ dispute, a court
properly refuses to employ an alternative construction. Id. Conversely, “when the parties
present a fundamental dispute regarding the scope of a claim term, it is the court’s duty to
-2-
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 3 of 40 PageID #: 5986
resolve it.” O2 Micro Int'l Ltd. v. Beyond Innovation Tech. Co., Ltd., 521 F.3d 1351,
“A determination that a claim term ‘needs no construction’ or has the ‘plain and
ordinary meaning’ may be inadequate when a term has more than one ‘ordinary’ meaning
or when reliance on a term's ‘ordinary’ meaning does not resolve the parties’ dispute.”
Id. at 1361. But, if giving the language of the term its plain, ordinary meaning resolves
the parties’ dispute, a court need not engage in claim construction merely to
accommodate one party’s semantic preference for the use of a particular word or phrase.
See Id. Similarly, a court need not construe a term where the parties do not present a
“fundamental dispute” with respect to the meaning of the term, but instead propose the
the scope of the property right being enforced, and is often the difference between
& Co., 659 F.3d 1369, 1370 (Fed. Cir. 2011). As a matter of law, the court is charged
with the responsibility for claim construction. Absolute Software, Inc. v. Stealth Signal,
Inc., 659 F.3d 1121, 1129 (Fed. Cir. 2011); Vitronics Corp. v. Conceptronic, Inc., 90 F.3d
The starting point for any claim construction is the language of the claim. Phillips
v. AWH Corp., 415 F.3d 1303, 1312 (Fed. Cir. 2005) (en banc). Wherever possible,
claim terms are given their plain and ordinary meaning as they would have been
-3-
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 4 of 40 PageID #: 5987
understood by one of ordinary skill in the art at the time that the patent issued. Id. at
1312–13. In addition, claims are construed “in the context of the entire patent, including
The specification informs the plain and ordinary meaning of the term. Id.; see also
Typhoon Touch Techs., Inc. v. Dell, Inc., 659 F.3d 1376, 1381 (Fed. Cir. 2011); Renishaw
PLC v. Marposs Societa' per Azioni, 158 F.3d 1243, 1250 (Fed. Cir. 1998) (“Ultimately,
the interpretation to be given a term can only be determined and confirmed with a full
understanding of what the inventors actually invented and intended to envelop with the
claim.”). However, the specification cannot be used to deviate from or to narrow the
plain and ordinary meaning of a claim term “unless the inventor acted as his own
lexicographer” and clearly set forth a definition of the disputed claim term or
“intentionally disclaimed or disavowed claim scope.” Retractable Techs, Inc., 659 F.3d
at 1371; see also Thorner v. Sony Company Entertainment America LLC, 669 F.3d 1362,
1366 (Fed. Cir. 2012) (Courts may not “read limitations from the specification into
claims; [and] do not redefine words. Only the patentee can do that.”); Teleflex, Inc. v.
Ficosa N. Am. Corp., 299 F.3d 1313, 1327 (Fed. Cir. 2002) (“Claim terms take on their
ordinary and accustomed meanings unless the patentee demonstrated an intent to deviate
... by redefining the term” [or by using in the specification] “expressions of manifest
“longstanding difficulty is the contrasting nature of the axioms that (a) a claim must be
read in view of the specification and (b) a court may not read a limitation into a claim
from the specification.” Innova/Pure Water, Inc. v. Safari Water Filtration Sys., Inc.,
-4-
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 5 of 40 PageID #: 5988
381 F.3d 1111, 1117 (Fed. Cir. 2004); see also Home Diagnostics, Inc. v. LifeScan, Inc.,
381 F.3d 1352, 1358 (Fed. Cir. 2004) (“Absent a clear disavowal or contrary definition in
the specification or the prosecution history, the patentee is entitled to the full scope of its
claim language.”). “[T]here is a fine line between reading a claim in light of the written
description and reading a limitation into the claim from the written description.”
Howmedica Osteonics Corp. v. Zimmer, Inc., 822 F.3d 1312, 1321 (Fed. Cir. 2016).
(emphasis original)
skill in the art who has read the entire patent, including the specification, at the time of
the invention.” SEB S.A. v. Montgomery Ward & Co., Inc., 594 F.3d 1360, 1368 (Fed.
Cir. 2010). The “circumstances in which the written description causes one of skill in
the art to reject the plain meaning of a term are quite narrow.” Retractable Techs, Inc.,
659 F.3d at 1371. If the inventor uses a “broad claim term that is not supported by his
specification,” a court may not “redefine a claim term to match [its understanding] of the
scope of the invention as disclosed in the specification.” Id. An inventor’s use of a broad
claim term unsupported by the specification may call the validity of the patent into
question, but the specification only narrows and never enlarges the meaning of a term.
Id.; see also Computer Docking Station Corp. v. Dell, Inc., 519 F.3d 1366, 1373 (Fed.
Cir. 2008) (stating that “the words of the claims define the scope of the patented
In construing a term, courts first consider sources of intrinsic evidence, such as the
claim language, the specification, and, where in evidence, the prosecution history. Id. at
-5-
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 6 of 40 PageID #: 5989
1317. Intrinsic evidence is the most significant source for determining the “legally
If, after consideration of the intrinsic evidence, the meaning of a term remains
treatises, and expert and inventor testimony. Phillips, 415 F.3d. at 1317-18. Although
extrinsic evidence may prove useful in some cases, it is, for a variety of reasons,
PHOSITA QUALIFICATIONS
person having ordinary skill in the art (PHOSITA). Kokido contends that a PHOSITA is
someone qualified in the field of vacuums generally and hand-held vacuums in particular.
Kokido’s expert, Adam Carr, has a bachelor’s degree in industrial design, an MBA in
Water Tech asserts that a PHOSITA must be qualified in the field of water-
electronic elements) and fluid dynamics (for maneuverability). Water Tech’s expert,
David Peterson, has a bachelor’s degree in civil engineering and additional education and
patents related to pools and pool cleaning devices. Kokido responds that this case
-6-
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 7 of 40 PageID #: 5990
involves only the form of the products and not their function, so water expertise is
unnecessary.
PHOSITA as follows:
The level of ordinary skill in the art is at least a bachelor’s degree in either
mechanical or electrical engineering and at least 3-5 years of experience in
the research, design and commercialization of products in the field of art, or
alternatively less formal education and at least 5-10 years of experience in
the research, design and commercialization of products in the field of art.
While there may be aspects especially of the ‘975 patent that address
hydrodynamics, none of the claim terms at issue here require such expertise. The Court
vacuums would appreciate the similarities and differences between air and water
vacuums in a manner sufficient to comprehend the patents. Therefore, with respect to the
claim construction issues presented here, the Court finds that a PHOSITA need not
Carr’s experience with hand-held vacuums suffices. In any case, the Court relies little on
either expert’s testimony for purposes of claim construction. Water Tech remains free to
-7-
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 8 of 40 PageID #: 5991
Col. 5:55–6:8.
1. Nozzle
The “nozzle” is referenced throughout the patent but is not precisely described or
identified by number in the specification. The abstract explains that the pool cleaner has
1
Claim 12 involves the same disputed terms. The Court’s construction of claim 1 terms
applies equally to claim 12.
-8-
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 9 of 40 PageID #: 5992
an “intake nozzle for suctioning pool water,” a handle “for manipulating the nozzle over
the surface of a pool,” and a filter housing “disposed between the nozzle and the body.”
Col. 1:38-45. The patent does, however, identify a nozzle attachment (36) similar to
vacuum hose attachments, a tubular member (44) to which such attachments fit, and a
nozzle pivot interface (42), which allows the nozzle attachments to angulate. The tubular
member is identified as 44 in Figure 3, illustrating the “nozzle end of the pool cleaner,”
-9-
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 10 of 40 PageID #: 5993
Water Tech asserts that “nozzle” should be construed as “a piece used to direct a
flow or fluid.” Kokido proposes “a short tube protruding from the pool cleaner used
to direct a flow of fluid.” Water Tech objects to Kokido’s construction insofar as the
patent does not specify length, require protrusion, or reference a tube. The Court agrees
that the patent does not invite inferences of length or protrusion. While these limitations
appear to be part of the preferred embodiment and are illustrated by the figures, they are
not suggested by the claim language itself or the description. As such, there is no basis
for importing these limitations into this term. See Arlington Indus., Inc. v. Bridgeport
Fittings, Inc., 345 F.3d 1318, 1327 (Fed. Cir. 2003) (declining to restrict the meaning of a
However, though the patent does not require any particular shape of nozzle
attachment, the figures depict a nozzle end that is tubular and, throughout the
specification, both the nozzle end and the nozzle attachments include a tubular member.
For example:
description or any of the embodiments discussed in the patent. The Court therefore finds
that the nozzle is tubular. See Howmedica, 822 F.3d at 1321 (noting that “every
description and every figure in the patent that discusses the issue” compelled the same
construction). Though the Court need not rely on the extrinsic evidence to reach this
- 10 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 11 of 40 PageID #: 5994
conclusion, the Court also notes that both parties’ dictionary definitions refer to a tube. 2
Thus, the Court concludes that “nozzle” shall be defined as “a tube directing a flow of
fluid.”
2. Body
Water Tech asserts that “body” needs no construction and should be given its plain
and ordinary meaning. Kokido proposes: “the main outer casing of the pool cleaner.”
reflects that “body” (16) refers to the rear section of the device as a whole.
Abstract: The body has a filter, and impeller and motor, rechargeable
batteries, and a handle for carrying the body and for maneuvering the
nozzle along the surface being cleaned.
Summary: The body houses a filter, an impeller attached to an electric
motor, and includes a handle for carrying the body.” A filter housing
disposed between the nozzle and the body accumulates the filtered debris.”
Col. 1:39-41, 1:44-46.
The body 16 includes hollow sections 18 … which fill with water during
immersion so the pool clearner 10 is not buoyant after fall [sic] immersion.
Col. 2:56-59.
A pole attachment member 20 extends from the body 16 allowing the
extended pole 12 to be securely but removably attached to the pool cleaner
10 … . Col. 2:63-65.
2
Water Tech offers a dictionary definition of nozzle as “a contracting, tapering tube or
vent used at the end of a pipe, tube, or hose to accelerate or direct the flow of a liquid.”
Academic Press Dictionary of Science and Technology, Christopher Morris ed., 1992.
Kokido offers the definition: “a short tube with a taper or constriction used (as on a hose)
to speed up or direct a flow of fluid. Nozzle.” Merriam-Webster.com. Accessed April
20, 2018. https://www.merriam-webster.com/dictionary/nozzle.
- 11 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 12 of 40 PageID #: 5995
body of the pool cleaner” and illustrate the entire rear section of the device, including its
Thus Kokido’s construction of “body” as meaning only the outer casing simply
does not comport with the intrinsic evidence. “The words of a claim receive the meaning
discernible by a person of ordinary skill in the art who has read the entire patent,
including the specification, at the time of the invention.” SEB S.A., 594 F.3d at 1368.
The Court finds that, after reading the entire patent, a PHOSITA would understand
“body” without the need for further construction. The Court rejects Kokido’s narrow
definition and declines to construe “body” away from its plain and ordinary meaning.
3. Toroidal body
circle) rotated about an axis forms a three-dimensional donut, i.e., a toroid. A two-
dimensional rectangle rotated about its axis forms a cylinder. Kokido asserts that
- 12 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 13 of 40 PageID #: 5996
“toroidal” is simply the adjective form of toroid and thus should be construed to mean a
complete and symmetrical toroid. Kokido therefore proposes the construction: “a body
that is shaped like a toroid and 360° symmetrical.” Water Tech asserts that “toroidal”
is broader and does not imply a perfect toroid; in fact, the patent figures preclude such a
toroid.”
are construed with the meaning with which they are presented in the patent document.
Phillips, 415 F.3d at 1316. “The context in which a term is used in the asserted claim can
be highly instructive.” Id. at 1314. Here, the context of Claim 1 instructs that an opening
in the upper portion of the toroidal body creates a handle. This implies that the body is
asymmetrical.
The specification is the best guide to the meaning of a disputed term. Id. at 1315.
Notably, patent Figures 2, 8, 9, and 11 do not depict a perfect toroid but rather a curved
body with a hole in the top. Figure 2 shown below is representative, and Kokido
concedes that its definition excludes this preferred embodiment. (Tr. 150) A proposed
construction that does not include a preferred embodiment is rarely, if ever, correct.
SanDisk Corp. V. Memorex Prod., Inc., 415 F.3d 1278, 1285 (Fed. Cir. 2005).
- 13 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 14 of 40 PageID #: 5997
Though the word “toroidal” appears only in the claims and not expressly in the
specification, the latter nonetheless implies a generalization of the term. Referring to the
“side elevational view” of the device (Fig. 2), the narrative describes a body with “an
ergonometric streamlined shape, e.g., a smooth and curvilinear surface providing low
resistance in the water.” Col. 2:51-53. In this respect, the specification reveals a
The prosecution history is consistent with the specification in this regard. “The
prosecution history has value because it provides evidence of how the PTO and the
inventor understood the patent.” FPS Investments, LLC v. Azteca Mill, L.P., 553
F.Supp.2d 1120, 1124 (E.D. Mo. 2008). Here, the inventor filed an amendment 3 adding
3
This amendment was also sought for the precursor to the ‘460, namely U.S. Patent
6,797,157 (the ‘157).
- 14 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 15 of 40 PageID #: 5998
“toroidal” to describe the body of the ‘460 in order to distinguish it from another pool
cleaner, known as the Schuman model, 4 which has a straight, elongated, cylindrical body.
Schuman ‘460
Although a cylinder is a type of toroid, the Schuman patent does not contain the
words toroid or toroidal; rather, the Schuman patent refers to the Schuman device as
cylindrical. Thus, in the ‘460 amendment application, the ‘460 inventor asserted that
Schuman “does not have a toroidal body” and explained that the ‘460’s toroidal body,
with a carrying handle formed from an opening in the body, “is more advantageous, since
it is easier to grasp as a handle,” causes “little or no strain to the hands of the user,”
“allows the pool cleaner to have a more compact shape … so the claimed invention is
more maneuverable,” and, due to the toroidal shape of its body, is “less susceptible to
water currents.” ECF No. 88-10. This explanation further illuminates the meaning of the
the patent examiner allowed the inventor’s amendment, reasoning that, although
Schuman did have a toroidal body (presumably because a cylinder is a toroid), Schuman
4
U.S. Patent No. 4,962,559.
- 15 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 16 of 40 PageID #: 5999
failed to teach a toroidal body having a carrying handle formed by an opening through
the toroidal body for carrying, manipulating, and directing the cleaner. ECF No. 88-20.
The foregoing evidence intrinsic to the ‘460 – the claim, specification, and
compact body with a hole through it for a handle, but not a perfect toroid. In other
words, if Figures 2 and 9 reflect what the inventor and examiner viewed as a toroidal
guidance. Instead, Kokido points to U.S. Patent No. 4,624,274, issued November 25,
1986 (the Norton patent), describing another cylindrical pool cleaner as having a
“toroidal shaped housing.” Norton is not disclosed as prior art in the ‘460 but rather in
the ‘460’s successor, specifically U.S. Patent No. 7,060,182, issued June 13, 2006 (the
‘182). But Kokido fails to supply authority for its proposition that a child’s prior art
carries the weight of intrinsic evidence as to the parent. Rather, Kokido principally
argues that, because terms should be construed consistently within a patent family (Paice
LLC v. Ford Motor Company, 881 F.3d 894, 904 (Fed. Cir. 2018)), and because Norton’s
version of toroidal (i.e., cylindrical) is prior art in the ‘182, then Norton’s version should
“relate back” to the ‘460. This argument is unpersuasive. There is no dispute that
Schuman and Norton are cylinders. While both the ‘182 and ‘460 contain cylinders, it
cannot be said that their embodiments resemble Schuman or Norton cylinders. Like the
‘460, the prosecution history of the ‘182 states that the prior art fails to teach a toroidal
- 16 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 17 of 40 PageID #: 6000
body with a carrying handle formed from the upper portion of the toroidal body. Again,
Looking beyond the patent itself, the Court finds minimal value in the extrinsic
evidence presented on this issue. Expert opinions can be unreliable because they are
generated during litigation. FPS Investments, 553 F.Supp.2d at 1124. Water Tech’s
expert essentially testified that anything with a curve and a hole is toroidal; Mr. Peterson
was not credible in this regard. “Unsupported … assertions as to the definition of a claim
term are not useful to a court.” Phillips, 415 F.3d at 1318. As such, the Court rejects Mr.
a “court should discount any expert testimony that is clearly at odds with the intrinsic
evidence.” Id. Here, Mr. Carr’s opinion is clearly at odds with the intrinsic evidence. In
As additional extrinsic evidence, Water Tech offered four unrelated patents using
“toroidal” to describe the shape of other objects, namely sunglasses, a tire, a watch face,
and a magnet. 5 The sunglasses curve around the eyes to create a partial circle; the others
form a complete donut or cylinder. The Court gives little weight to this evidence, which
only underscores the variation in usage. See e.g., Elan Microelectronics Corp. v. Pixcir
May 30, 2013) (noting that an “unrelated patent carries much less persuasive weight than
5
Water Tech offered these patents as Exhibits 13-16 attached to their responsive brief.
ECF Nos. 108-4, -5, -6, -7. Kokido moved to strike the exhibits as untimely (ECF No.
110) but withdrew its objection during the Markman hearing. Tr. 151.
- 17 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 18 of 40 PageID #: 6001
the specification” and should not be used to vary the definition from the usage in the
specification).
Finally, a court may rely on a dictionary definition so long as that definition does
not contradict the meaning ascertained by a reading of the patent documents. Trustees of
Columbia Univ. in City of New York v. Symantec Corp., 811 F.3d 1359, 1363 (Fed. Cir.
2016). The suffix “-al” generally means “of, relating to, or characterized by.” See e.g.,
Civix-DDI, LLC v. Cellco Partnership, 03 C 3792, 2005 WL 831307, at *4 (N.D. Ill. Apr.
6, 2005) (citing Webster’s 3rd New Int’l Dictionary). 6 Kokido provides a dictionary
definition of toroidal as: “of, relating to, or shaped like a torus or toroid; doughnut-
shaped.” 7 This definition contains aspects of each party’s constructions insofar as Water
Tech invokes “related to” and Kokido invokes “shaped like.” But Kokido’s construction
In sum, while the intrinsic evidence lends substantial breadth to the word
“toroidal,” 8 that same evidence also precludes Kokido’s narrow definition. Thus, upon
6
See also “-Al.” Merriam-Webster.com. Accessed March 5, 2019.
https://www.merriam-webster.com/dictionary/Al
7
“Toroidal.” Merriam-Webster.com. Accessed April 20, 2018. https://www.merriam-
webster.com/dictionary/toroidal.
8
A “patent is invalid for indefiniteness if its claims, read in light of the specification
delineating the patent, and the prosecution history, fail to inform, with reasonable
certainty, those skilled in the art about the scope of the invention.” Nautilus, Inc. v.
Biosig Instruments, Inc., 572 U.S. 898, 901, 134 S. Ct. 2120, 2124, 189 L. Ed. 2d 37
(2014). The Court expresses no opinion on indefiniteness at this stage.
- 18 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 19 of 40 PageID #: 6002
consideration of the intrinsic and extrinsic evidence, the Court concludes that “toroidal
For this term, Water Tech proposes: “carrying handle being formed as a single
unit with the body at a portion of the body that is on a different axis than the axis of
the body and defining a space between the body handle and the body.” In its brief,
Water Tech dissects the claim into separate parts: distinguishing “integrally formed” (as a
single unit) from “integrally molded;” distinguishing the axis of the body from the axis of
the handle; and asserting that the handle need not be closed but could also be open (like a
hook or a letter “C” rather than a loop or letter “O”). Using this definition, Water Tech
contends that the pole attachment member (20) could serve as a carrying handle if the
depicts by illustration: “an integral handle formed from the upper portion of the body
by an opening through the body, i.e., the opening through the body creates the
2, 8, 9, and 11 identify the handle in question as number 14 (see Figure 2 above), created
by the hole through the top of the body when right-side up. The pole attachment member
(20) extends from underneath the device to hold an extension pole. The written
description confirms these distinct functions. For example, in its “hand-held mode of
- 19 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 20 of 40 PageID #: 6003
operation, the pool cleaner includes an integral handle 14, allowing the user immersed
with the pool cleaner 10 in the pool to grasp and orient the pool cleaner 10 and so to
manipulate the pool cleaner over the surfaces.” Col. 2:44-48. By contrast, the “pole
attachment member 20 extends from the body 16 allowing the extended pole 12 to be
securely but removably attached to the pool cleaner” for use while standing outside the
pool. Col. 2:63-66. The specification further states that the pool cleaner “responds
primarily to the movement determined by the user by use of the handle 14 or the pole 12
when attached to the pole attachment member 20.” Col. 3:17-20. (emphasis added)
These excerpts make clear that the handle (14) and pole attachment member (20) are
different things. Neither the figures nor the written description of the specification invite
specification. Kokido does not dispute that “integrally formed” is different than
assembled unit. The Federal Circuit instructs that “integral” can encompass “more than
a unitary construction.” In re Morris, 127 F.3d 1048, 1055 (Fed. Cir. 1997). But, again,
claim terms must be construed in the context of the entire patent. Trustees of Columbia
Univ. in City of New York, 811 F.3d at 1362. Water Tech’s suggestion that the ‘460’s
handle can be assembled with the body, so as to qualify the pole attachment member as a
handle, does not comport with the intrinsic evidence demonstrating that the handle is
- 20 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 21 of 40 PageID #: 6004
definition, the handle could be anywhere so long as it is not aligned with the axis of the
battery housing. Water Tech goes so far as to assert that “the term ‘upper’ is relative”
because the cleaner can be held upside down. This very reasoning confirms that the
device has an intended orientation, as shown in the figures. Taken to its logical extreme,
Water Tech’s theory of relativity negates all patent references to orientation and
perspective. In the very least, it renders the claim term “upper” superfluous. “A claim
construction that gives meaning to all the terms of the claim is preferred over one that
does not do so.” Merck & Co., Inc. v. Teva Pharmaceuticals USA, Inc., 395 F.3d 1364,
Equally unpersuasive is Water Tech’s contention that the handle, shown in the
patent figures as a closed loop or hole, could also be open like a hook - hence the phrase
“defining a space between the body handle and the body.” The intrinsic evidence
between” is not an accurate substitute, and, again, Water Tech’s attempt to capture the
pole attachment member within the definition of the handle is unavailing. The Court
does not believe that a PHOSITA would read the entire patent and conclude that the
carrying handle described therein could be understood to include the pole attachment
member, or that the words “formed from … an opening through the toroidal body” would
include a hook.
“The construction that stays true to the claim language and most naturally aligns
with the patent’s description of the invention will be, in the end, the correct
- 21 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 22 of 40 PageID #: 6005
construction.” Renishaw PLC v. Marposs Societa' per Azioni, 158 F.3d at 1250. The
what the inventors actually invented and intended to envelop with the claim.” Id.
Kokido’s proposal offers a natural reading supported by the claim language and
specification. Accordingly, the Court adopts the construction: “an integral handle
formed from the upper portion of the body by an opening through the body, i.e., the
opening through the body creates the handle from the upper portion of the body.”
The pool cleaning kit of claim 1, wherein the nozzle of the pool cleaner is
pivotable.
Col. 6:27–28.
Water Tech asserts that no construction is necessary; the term can be given its
plain and ordinary meaning. Kokido proposes: “the nozzle can pivot with respect to
the body.” Kokido’s entire argument on this term consists of two sentences stating that
(1) “pivotable” is not defined in the ‘460 and (2) a PHOSITA would assign Kokido’s
proposed meaning. This provides scant reason for the Court to intervene. Kokido fails to
articulate how the claim is ambiguous absent the qualifier “with respect to the body.” In
fact, the qualifier only injects confusion because the nozzle pivot interface is actually
attached to the filter housing (26) and not the body (16), as Kokido will recognize in
Claim 7.
- 22 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 23 of 40 PageID #: 6006
Figures 2, 3, and 11 illustrate the assembly and mobility of this aspect of the
In other words, the nozzle pivot interface enables the nozzle attachment to
angulate so as to maintain contact with the surface being cleaned. Additionally, Kokido’s
own expert, Mr. Carr, stated in his declaration that a PHOSITA would construe the term
“pivotable” to have its plain and ordinary meaning. (Carr declaration ¶142.)
The pool cleaning kit of claim 1, wherein the pool cleaner further includes:
a filter housing disposed between the nozzle and the body for
accumulating the filtered debris.
Col. 6:29–32.
understand the plain and ordinary meaning of the claim language. Kokido splits the
phrase into two parts. Kokido proposes that “filter housing” be defined as “a structure
separate and distinct from the body and nozzle that contains the filter in which
debris is accumulated.” From there, Kokido proposes that the full phrase be defined as
- 23 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 24 of 40 PageID #: 6007
“a structure containing a filter and the filter housing is separate and distinct from
the body.” Again here, Kokido fails to convince the Court that construction is
warranted.
The claim itself already distinguishes the filter housing from the nozzle and body
by stating that the filter housing is disposed (i.e., positioned) between the nozzle and the
body. It is also obvious from the plain and ordinary meaning of the claim, read in its
entirety, that the filter housing contains (i.e., houses) a filter in which debris is
the term “filter housing” to have its plain and ordinary meaning. (Carr declaration ¶146.)
A court need not engage in claim construction merely to accommodate one party’s
preference for the use of a particular word or phrase. O2 Micro, 521 F.3d at 1361-62.
- 24 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 25 of 40 PageID #: 6008
- 25 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 26 of 40 PageID #: 6009
FIG 3
1. Gap
Water Tech asserts that “gap” does not require construction and should be given
its plain and ordinary meaning. Kokido proposes: “an unfilled open space between two
separate objects.” Specification figures show a space (75) between the front housing
- 26 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 27 of 40 PageID #: 6010
section (25) and rear body housing (23), separating those two parts of the device. Kokido
offers a dictionary definition describing a gap as “a separation in space” 9 and Mr. Carr’s
“Words of a claim are generally given their ordinary and customary meaning,
which is the meaning a term would have to a person of ordinary skill in the art after
reviewing the intrinsic record at the time of the invention.” O2 Micro, 521 F.3d at 1360.
“In some cases, the ordinary meaning of claim language “may be readily apparent even to
lay judges, and claim construction in such cases involves little more than the application
of the widely accepted meaning of commonly understood words.” Id. Such is the case
here. The plain and ordinary meaning of “gap” is readily apparent even to this Court.
Construction is unnecessary.
For “front housing section,” Water Tech proposes: “a front portion of the
housing having one or more parts.” Kokido proposes: “a housing located at the
The parties agree generally that “front housing section” identifies the front portion
of the device and distinguishes it from the back of the device, called the “rear body
The construction of the pool vacuum 21 is somewhat modular with the rear
body housing 23 including the mechanics and structural connections, while
the nose-cone shaped front housing section 25 includes a filter cone and
water inlet. Water is expelled from a narrow space between the rear body
9
“Gap.” Merriam-Webster.com Accessed April 20, 2018. https://www.merriam-
webster.com/dictionary/gap.
- 27 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 28 of 40 PageID #: 6011
Similarly, Figures 1-5 identify the front housing section (25) and rear body
housing (23) generally as the front and back portions of the device, as illustrated above in
Figure 3. The parties also agree that the front housing section comprises other
components (Fig. 3), including a housing member (Fig. 2-3, 79) that serves as a shell
around the internal elements of the front section. As external evidence, Water Tech
Water Tech argues that Kokido’s definition is imprecise because it equates the
front and back housings, whereas the inventor chose to use the broader term “section” for
the front. Indeed, in the absence of evidence to the contrary, the Court must presume that
the use of different terms connotes different meanings. CAE Screenplates Inc. v.
Heinrich Fiedler GmbH & Co. KG, 224 F.3d 1308, 1318 (Fed. Cir. 2000). Consistent
with this principle, the Court agrees with both parties that the “front housing section” is
more than just the housing (i.e., shell, casing). Thus, neither party’s definition specifying
the housing is accurate. Rather, “front housing section” simply identifies the front part
(i.e., portion, half) of the device, including the housing member and components therein,
as distinct from the rear body housing. As such, the Court rejects the parties’
constructions and instead construes “front housing section” to mean the “front section
10
Academic Press Dictionary of Science and Technology, Christopher Morris ed. 1992).
- 28 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 29 of 40 PageID #: 6012
3. A front housing section affixed to said rear body housing and defining a
gap between said rear body housing and said front housing section
For this phrase, Water Tech proposes: “a space formed at or near an end of the
rear body housing or an end of the front housing section or both.” Kokido proposes:
“when the front enclosure is attached to the rear enclosure, an unfilled open space is
formed between the end of the front housing and the rear housing.”
Again, Figures 2 and 3 illustrate the configuration. The front and rear sections of
the device connect by way of fittings (61, 69) and spacers (67) that leave a narrow space
(described in one place as “about one quarter of an inch” Col. 8:33-34) in between the
two sections (i.e., the gap (75)) for water expulsion. The specification describes several
variations:
The rear body housing 23 has a series of four angled fittings 61, each
having a linear cutout 63 for admitting a bolt 65. Just forward of the four
angled fittings 61, a spacer 67 sets the separation between the four angled
fittings 61 of the rear body housing 23 and a series of four filter cone
housing fittings 69 which are attached to or formed integrally with a cone
plate 71. The spacers 67 can be formed integrally with either the four
angled fittings 61 or the series of four filter cone housing fittings 69.
Where the spacers 67 are formed integrally with the four angled fittings 61
the extent of the forward most extent of the rear body housing 23 will be
extended forward, and where the spacers 67 are formed integrally with the
series of four filter cone housing fittings 69 the rearward extent of the nose-
cone shaped front housing section will be extended rearwardly. …
In either of these three cases, a gap 75 may be formed completely about the
connection of the rear body housing 23 with the nose-cone shaped front
housing section 25, interrupted only by the existence of the periodically
appearing four angled fittings 61, spacers 67 and series of four filter cone
housing fittings 69, or the gap may exist on the upper side and two lateral
sides with the bottom gap covered by an interfering plate or obstruction.
Col. 3:46-4:5.
- 29 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 30 of 40 PageID #: 6013
To simplify, Water Tech explains that the spacers can be attached to the rear
portion of the device extending forward, or to the front section extending backward, or
neither. Based on these variations, Water Tech claims that the gap may be positioned at
the front of the rear portion, or at the back of the front section, or both, depending on the
placement of the spacers. Kokido responds that such a characterization is absurd; there is
only one gap, formed by spacers between the front and back sections, regardless of which
The Court agrees with Kokido that the gap need not be attributed to either section of the
device, as Water Tech advocates. The claim language itself is clear in this respect: the
affixing of the front housing section to the rear body housing defines a gap between the
Abstract: An interstitial open exhaust gap between a rear body and front
nose-cone section provides a low pressure drop free exhaust area for an
impeller. Col. 1:59-61. (emphasis added)
Description: One aspect of the even placement of the angled fittings 61,
spacers 67 and series of four filter cone housing fittings 69 is that the gaps
73 which open circumferentially around the periphery of the pool vacuum
21 at the junction between the rear body housing 23 and the nose-cone
shaped front housing section 25 form an even filtered water exhaust. Col.
4:11-16.
Also seen are the spacers 67 which help identify and control the width of
the gap. Col. 8:30-31.
Put simply, the gap is located at and created by the junction between the two sections.
Thus, Water Tech’s definition is not acceptable. However, Kokido’s definition is also
flawed insofar as it injects the new and undefined term “enclosure” and contains the
- 30 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 31 of 40 PageID #: 6014
The Court finds that the proper construction is: “a front housing section 11 that is
affixed to the rear body housing in a manner that creates an open gap between the
that increases in size and opens wide at an end.” In support of its proposed
construction, Kokido offers dictionary definitions of expand (to open out, to spread),12
skeleton (something forming a structural framework), 13 and skeletal (of, relating to,
forming, attached to, or resembling a skeleton), 14 and the affirmation of Mr. Carr.
Water Tech contends that that a PHOSITA would readily understand the phrase
“expanded skeletal structure” such that the plain and ordinary meaning suffices. At the
same time, however, Water Tech objects to Kokido’s limitations “increases in size” and
“opens wide at an end.” Clearly, the parties dispute what “an expanded skeletal
structure” means. “[W]hen the parties present a fundamental dispute regarding the scope
of a claim term, it is the court’s duty to resolve it.” O2 Micro, 521 F.3d at 1361-62.
11
As construed supra.
12
“Expand.” Merriam-Webster.com. Accessed April 18, 2018. https://www.merriam-
webster.com/dictionary/expand.
13
“Skeleton.” Merriam-Webster.com. Accessed April 18, 2018. https://www.merriam-
webster.com/dictionary/skeleton.
14
“Skeletal.” Merriam-Webster.com. Accessed April 18, 2018. https://www.merriam-
webster.com/dictionary/skeletal.
- 31 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 32 of 40 PageID #: 6015
“As can be seen, the cone plate 71 supports an expanded skeletal structure 99 which
includes longitudinal ribs 101 periodically connected to a series of ring supports 103.”
Col. 5:67-6:3.
members.” As for “expanded,” while the front housing section in Claim 12 is not
end.” Therefore, the Court concludes that “an expanded skeletal structure” means “a
Water Tech maintains that “attached to said rear body housing” needs no
construction and should be given its plain and ordinary meaning. Kokido proposes:
“fastened or joined directly to the rear body housing.” Centrally, the parties dispute
whether the expanded skeletal structure must be attached directly to the rear body
A review of the patent as a whole reveals two important factors related to this
issue. First, while Claim 1 and Claim 10 both disclose a cone plate attached to the rear
- 32 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 33 of 40 PageID #: 6016
body housing, neither claim discloses an expanded skeletal structure attached to the rear
body housing and extending into the front housing section. Rather, that element is
disclosed only in Claim 12 and dependent Claim 13. Claims 1 and 10 disclose only “a
filter cone housing member” attached to said cone plate. And Claim 12 does not disclose
a cone plate but instead simply discloses that the expanded skeletal structure is “attached”
to the rear body housing. However, the figures illustrate, and the preferred embodiment
discusses, an expanded skeletal structure that is attached to a cone plate, which is, in turn,
affixed to the rear body housing. The written specification states in pertinent part:
As has been explained, the cone plate 71 is attached to the rear body
housing 23 with the use of four angled fittings 61 and four filter cone
housing fittings 69 with the possibility of an optional spacer 67 … . Col.
4:43-46.
These excerpts together indicate that, in one and perhaps the preferred
embodiment, the expanded skeletal structure is attached to the cone plate, which is
attached to the rear body housing by way of the fittings. Figure 3 illustrates such an
assembly (99, 71, 61, 69, 23). So, Kokido’s proposed construction requiring direct
- 33 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 34 of 40 PageID #: 6017
attachment of the skeletal structure to the housing conflicts with the specification and
Further support for this conclusion is found in the fact that, discussing the filter
cone housing and the cone plate, the claim language uses the word “attached,” but in
discussing the front housing section and the rear body housing, the claims use the word
“affixed.” Claim terms must be construed in the context of the entire patent. Trustees of
Columbia Univ. in City of New York, 811 F.3d at 1362. Viewing the patent in its entirety,
a PHOSITA would understand that “attached” in this context includes direct and indirect
attachment. Thus, the Court construes “attached” to include direct and indirect
attachment.
Col. 13:13–19.
Water Tech contends that this claim does not require construction and should be
given its plain and ordinary meaning. Kokido proposes: “the drainage valve is located
- 34 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 35 of 40 PageID #: 6018
Figure 3 shows the valve (85) at the end of an extension structure (113) not
PHOSITA would understand the claim in question to mean what Kokido proposes.
Water Tech counters that Kokido’s definition attempts to limit the claim scope, when the
actual language “in communication with” does not specify positioning but merely
describes the relationship between the valve and the opening. The Court agrees that
Kokido’s definition adds an unnecessary restriction. A claim should not be limited by the
preferred embodiment. Phillips, 415 F.3d at 1323. Apart from Kokido’s attempt to
restrict the claim language, the parties do not appear to have any real dispute with respect
to the claim language. A court need not construe a term where the parties do not present
a fundamental dispute with respect to the meaning of the term but instead propose the use
of different language to achieve greater clarity or precision. O2 Micro, 521 F.3d at 1362.
15
A frustrum is the remainder of a cone after its tip has been cut off.
- 35 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 36 of 40 PageID #: 6019
Kokido fails to convince the Court of a fundamental dispute over the meaning of this
claim, and the Court agrees with Water Tech that the plain and ordinary meaning
suffices.
The ‘D396 design patent claims “the ornamental design for a pool vacuum” as
Kokido urges the Court to construe this claim as requiring opaque surfaces. In
support, Kokido cites §1503.02.II of the Manual of Patent Examining Procedure (MPEP)
stating: “Oblique line shading must be used to show transparent, translucent and highly
polished or reflective surfaces, such as a mirror.” In response, Water Tech contends that
MPEP §1503.02 only requires oblique line shading when the inventor intends to limit the
claim to a transparent surface; given that the ‘D396 does not specify whether the exterior
- 36 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 37 of 40 PageID #: 6020
Water Tech’s position is supported by the MPEP and the reasoning of another
district court. MPEP §1503.02 states: “While surface shading is not required under 37
CFR 1.152, it may be necessary in particular cases to shade the figures to show clearly
the character and contour of all surfaces of any 3-dimensional aspects of the design.”
MPEP §1503.02. (emphasis added) “The mandatory language does not necessarily
mean that lack of oblique line shading disclaims a transparent … surface, nor does the
lack of oblique line shading mean that the patentee only claimed an opaque surface.”
(N.D. Cal. July 27, 2012). The MPEP “only specifies that an inventor wishing to limit a
particular surface to a transparent … material must indicate the surface through the use of
oblique lines. It does not state that failure to include oblique lines necessarily excludes
the use of a transparent surface.” Id. This Court agrees with that conclusion.
Kokido further argues that the ‘D396 necessarily claims an opaque housing
because it relates to the ‘975 utility patent, and Figures 2 and 3 of the ‘975 (see above)
suggest that the filter cone housing member (79) is opaque. Specifically, Figure 3
mirrors Figure 2 “but with a portion of the filter cone housing member removed to
expose an expanded skeletal structure covered with filter material.” Col. 2:16-18. But
Kokido offers no authority for its proposition that the ‘975 dictates construction of the
‘D396, and it is not intrinsic evidence. “Design patents have almost no scope and are
limited to what is shown in the application drawings.” FPS Investments, 553 F. Supp. 2d
at 1130. In construing a design patent, the “scope of the claimed design encompasses its
- 37 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 38 of 40 PageID #: 6021
Viewing the design drawings within the foregoing framework, the Court
concludes that the scope of the ‘D396 patent is not limited to contemplate only an opaque
CONCLUSION
IT IS HEREBY ORDERED that the parties’ motions for claim construction are
toroid.”
toroidal body and an opening through the toroidal body” shall be defined as
“an integral handle formed from the upper portion of the body by an opening
through the body, i.e., the opening through the body creates the handle from
e) The plain and ordinary meaning of “wherein the nozzle of the pool cleaner is
construction.
- 38 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 39 of 40 PageID #: 6022
f) The plain and ordinary meaning of “a filter housing disposed between the nozzle
b) The “front housing section” shall be defined as the “front section of the pool
c) “A front housing section affixed to said rear body housing and defining a gap
between said rear body housing and said front housing section” shall be
defined as “a front housing section that is affixed to the rear body housing in a
manner that creates an open gap between the front housing section and the
e) “Attached to said rear body housing” shall be construed to include direct and
indirect attachment.
f) The plain and ordinary meaning of “said expanded skeletal structure has an
opening not covered by said area of filter material and further comprising: a
skeletal structure, and an output, for draining filtered water from within said
- 39 -
Case: 4:17-cv-01906-AGF Doc. #: 137 Filed: 03/15/19 Page: 40 of 40 PageID #: 6023
requires no construction.
3) The ‘D396 design patent shall be construed to encompass both opaque and transparent
surfaces.
attached to Water Tech’s responsive brief (ECF Nos. 108-4. -5, -6, -7) is DENIED as
AUDREY G. FLEISSIG
UNITED STATES DISTRICT JUDGE
- 40 -