Professional Documents
Culture Documents
Vocational e Books Horticulture PDF
Vocational e Books Horticulture PDF
com
PREFACE
Horticulture has now become as lifeline of a large population in the world. Even
in India, we talk largely about horticulture. Horticulture consists of several branches
but fruit cultivation (Pomology), vegetable cultivation (Olericulture) and flower
cultivation (Floriculture) are the major branches of horticulture. We need fruits,
vegetables and flowers in our daily life. It is a known fact that we are the 2nd largest
producers of fruits and vegetables in the world. However, our productivity is dismally
low than several other countries of the world primarily because horticulture sectors
is encountered with several problems, and to tackle these problems, several
technologies have been standardized by the scientists.
z This is a basic course on horticulture, which will enlighten the students with
the new areas in horticulture and development of skills in different areas of
horticulture. Major topics covered in this course are business opportunities
in horticulture, principles of preservation and processing, syrups and brines,
urban horticulture, weeds of horticultural crops and their management,
methods of propagation of horticultural crops and planting material for
horticultural crops.
z After studying this course, students will get an idea about several
opportunities, which horticulture can offer to them in their future life.
Students can also think of joining this sector in their future life and can
develop themselves as successful entrepreneurs in the area of horticulture.
z This course has been developed with the aim to sensitize the students about
nursery raising, newer techniques of plant propagation, so that they can
think of joining hands in nursery business or they can think of choosing
horticulture as one of the subjects for their higher studies.
z This course has been designed to provide entry level job skills to the students,
which will help to meet the human resource requirements in horticulture
sector.
i
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
ACKNOWLEDGEMENTS
Advisors
z Dr. S. Ayyappan, Secretary, DARE and Director General (ICAR),
Krishi Bhavan, New Delhi-110 001
z Sh. Vineet Joshi, IAS, Chairman, CBSE, Delhi-110 092
Special Acknowledgements
z Dr. Rameshawar Singh, Project Director (DKMA), Directorate of
Knowledge Management in Agriculture, Krishi Anusandhan Bhavan,
Pusa, New Delhi-110 012
z Dr. Jagdeep Saxena, Editor, ICAR, New Delhi-110 012
iii
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Basic Horticulture - II
Student Handbook
Class XII
Authors
DR. R.R. SHARMA
DR. S. K. UPADHYAY
DR. MANISH SRIVASTAV
DR. HARE KRISHNA
v
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Hkkjr dk lafo/kku
mísf'kdk
ge] Hkkjr ds yksx] Hkkjr dks ,d 1[laiw.kZ izHkqRo&laiUu] lektoknh] iaFk&fujis{k] yksdra=kkRed x.kjkT;]
cukus ds fy, rFkk mlds leLr ukxfjdksa dks%
lkekftd] vkfFkZd vkSj jktuSfrd U;k;]
fopkj] vfHkO;fDr] fo'okl] /keZ vkSj mikluk dh Lora=krk]
izfr"Bk vkSj volj dh lerk izkIr djkus ds fy,]
rFkk mu lcesa O;fDr dh xfjek vkSj 2[jk"Vª dh ,drk vkSj v[kaMrk lqfuf'pr] djus okyh ca/kqrk c<+kus
ds fy,
n`<+ladYi gksdj viuh bl lafo/kku lHkk esa vkt rkjh[k 26 uoacj] 1949 bZ- ¼fefr ekxZ'kh"kZ 'kqDyk
lIreh] laor~ nks gt+kj Ng foØeh½ dks ,rn~}kjk bl lafo/kku dks vaxhd`r] vf/kfu;fer vkSj vkRekfiZr
djrs gSaA
Hkkjr dk lafo/kku
Hkkx 4d
ukxfjdksa ds ewy drZO;
vuqPNsn 51d
ewy drZO;& Hkkjr ds izR;sd ukxfjd dk ;g drZO; gksxk fd og &
¼d½ lafo/kku dk ikyu djs vkSj mlds vkn'kksZa] laLFkkvksa] jk"Vª/otksa vkSj jk"Vªxku dk vknj djs(
¼[k½ Lora=krk ds fy, gekjs jk"Vªh; vkanksyu dks izfs jr djus okys mPp vkn'kksaZ dks ân; esa latks, j[ks vkSj mudk
ikyu djs(
¼x½ Hkkjr dh laizHkqrk] ,drk vkSj v[kaMrk dh j{kk djs vkSj mls v{kq..k cuk, j[ks(
¼?k½ ns'k dh j{kk djs vkSj vkg~oku fd, tkus ij jk"Vª dh lsok djs(
¼M-½ Hkkjr ds lHkh yksxksa esa lejlrk vkSj leku Hkzkr`Ro dh Hkkouk dk fuekZ.k djs tks /keZ] Hkk"kk vkSj izns'k
;k oxZ ij vk/kkfjr lHkh HksnHkko ls ijs gks] ,slh izFkkvksa dk R;kx djs tks efgykvksa ds lEeku ds
fo#n~/k gks(a
¼p½ gekjh lkekfld laLd`fr dh xkSjo'kkyh ijaijk dk egRo le>s vkSj mldk ifjj{k.k djs(
¼N½ izkd`frd i;kZoj.k dh] ftlds varxZr ou] >hy] unh vkSj oU; tho gSa] j{kk djs vkSj mldk lao/kZu djs
rFkk izkf.kek=k ds izfr n;kHkko j[ks(
¼t½ oSKkfud n`f"Vdks.k] ekuookn vkSj KkuktZu rFkk lq/kkj dh Hkkouk dk fodkl djs(
¼>½ lkoZtfud laifRr dks lqjf{kr j[ks vkSj fgalk ls nwj jgs(
¼×k½ O;fDrxr vkSj lkewfgd xfrfof/k;ksa ds lHkh {ks=kksa esa mRd"kZ dh vksj c<+us dk lrr iz;kl djs] ftlls jk"Vª
fujarj c<+rs gq, iz;Ru vkSj miyfC/k dh ubZ Å¡pkb;ksa dks Nw lds( vkSj
¼V½ ;fn ekrk&firk ;k laj{kd gS] Ng o"kZ ls pkSng o"kZ rd dh vk;q okys vius] ;FkkfLFkfr] ckyd ;k izfrikY;
dks f'k{kk ds volj iznku djsA
vii
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
WE, THE PEOPLE OF INDIA, having solemnly resolved to constitute India into a 1[SOVEREIGN SOCIALIST
SECULAR DEMOCRATIC REPUBLIC] and to secure to all its citizens:
FRATERNITY assuring the dignity of the individual and the 2[unity and integrity of the Nation];
IN OUR CONSTITUENT ASSEMBLY this twenty-sixth day of November, 1949, do HEREBY ADOPT,
ENACT AND GIVE TO OURSELVES THIS i CONSTITUTION.
1. Subs. by the Constitution (Forty-Second Amendment) Act. 1976, sec.2, for "Sovereign Democratic Republic
(w.e.f. 3.1.1977)
2. Subs. by the Constitution (Forty-Second Amendment) Act. 1976, sec.2, for 'unity of the Nation (w.e.f.
3.1.1977)
ARTICLE 51 A
(a) to abide by the Constitution and respect its ideals and institutions, the National Flag and the
National Anthem;
(b) to cherish and follow the noble ideals which inspired our national struggle for freedom;
(c) to uphold and protect the sovereignty, unity and integrity of India;
(d) to defend the country and render national service when called upon to do so;
(e) To promote harmony and the spirit of common brotherhood amongst all the people of India
transcending religious, linguistic and regional or sectional diversities; to renounce practices
derogatory to the dignity of women;
(f) to value and preserve the rich heritage of our composite culture;
(g) to protect and improve the natural environment including forests, lakes, rivers, wild life and to
have compassion for living creatures;
(h) to develop the scientific temper, humanism and the spirit of inquiry and reform;
(j) to strive towards excellence in all spheres of individual and collective activity so that the nation
constantly rises to higher levels of endeavour and achievement.
*(k) a parent or guardian to provide opportunities for education to his child or as the case may be ward
between the age of six and fourteen years.
viii
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
CONTENTS
Chapter - 1
BUSINESS OPPORTUNITIES IN HORTICULTURE 1-5
Chapter - 2
PRINCIPLES OF PRESERVATION AND VALUE ADDITION
OF HORTICULTURAL PRODUCE 6-20
Chapter - 3
SYRUPS, BRINES AND FOOD COLOURS 21-30
Chapter - 4
URBAN HORTICULTURE 31-39
Chapter - 5
WEEDS OF HORTICULTURAL CROPS AND THEIR
MANAGEMENT 40-53
Chapter - 6
METHODS OF PROPAGATION OF HORTICULTURAL
CROPS 54-74
Chapter - 7
PLANTING MATERIAL FOR HORTICULTURAL CROPS 75-92
ix
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Chapter - 1
BUSINESS OPPORTUNITIES
IN HORTICULTURE
OBJECTIVES
After studying this unit, the students will be able to:
INTRODUCTION
Dear students, in class XIth, you have read about the meaning of horticulture, its
different branches such as Pomology, Olericulture and Floriculture and importance of
these branches of horticulture. During this process, you might have come across the
question in mind that what for we are reading this subject? Some of you might have
thought of neglecting it and some might have thought to leave in between. Dear all,
don’t worry, it’s not true. After reading this chapter, you will come to know that this
subject has most valuable business opportunities. For example, you can go for higher
studies to become a scientist or a teacher or you can start growing fruits, vegetables,
can become consultant, business manager, can open consultancy services or can start
business of fruit based processing industry as well. There is a lot of scope for a
horticulturist than other subjects. Read this chapter and decide yourself !!!
1
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Although, experience is gained only with practice, a graduate should also have full
knowledge about package of practices of the fruits to be grown. However, near
cities or towns, one can go for the business of growing perishable fruits, and in
far a way places, we can grow fruits as per demand of the area or climatic and soil
conditions.
Cut flower production: This business is flourishing in big cities and towns.
Unfortunately, those who are involved in this business are non-horticulture persons,
who do not know the basics of proper handling of cut flowers during transportation
or display. However, horticulture graduates can take up this business without a second
thought.
Fruit plant nursery as microenterprise: In India there are about 4000 Govt. and
private nurseries of fruit plants. Still there is always paucity of quality planting
material. Moreover, most of the nurserymen engaged in this business are illiterate
or nearly so. Although, raising of fruit plants nursery looks quite easy but it
requires technical skill for budding, grafting, transplanting or packing of planting
material. Hence, fruit plant nursery can be a good business choice for horticulture
graduates.
Vegetable and ornamental plants nursery: For fruit plant nursery, one require larger
area, whereas for most of the flowering annuals and vegetables, little smaller area is
required for nursery. Hence, raising and maintaining of vegetable or ornamental
plants nursery can be a good option in such localities. In big cities and town, there is
always a great demand for herbaceous perennials, shade loving plants, climbers etc.
2
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Hence, such plants can also be grown along with fruit plants nursery, which can be a
good business opportunity for horticulture graduates.
Hi-tech flower and vegetable nursery: Although, several vegetables and flowers
are produced by following routine practices but due to rise in technical knowledge
and purchasing power of consumers, there is always a demand for nursery plants
raised through hi-tech procedures. At several places, such nurseries have come up.
However, unfortunately such nurseries are, by and large, run by non-technical personnel
rather than horticulture graduates. Thus, hi-tech flower and vegetable nursery can
also be a goof business opportunity for horticulture graduates.
Horticulture-based processing industry: During the recent years, there has been
significant increase in urbanization. In cities, significant amount of middle class
families are living, which demand for processed products of fruits and vegetables
such as fruit juices, squashes, jams, jellies, pickles, preserves etc. In our country,
about 30-40% of horticultural produce is lost between harvesting and consumption
due to improper handling of fruits and vegetables. This loss can be avoided or
reduced significantly if fruits and vegetables are processed in to value added products.
Horticulture graduates can contribute in this direction by establishing processing
units. Although, it requires huge money initially but Ministry of Food Processing
Industries, Govt. of India provides subsidy on it. The processing industries are labor
intensive and offer high employment potential in collection centers, grading, packing,
loading / unloading, storages (warehouses and cold storages), transport, marketing
and processing units.
Dry flowers: In towns and cities, there is a great demand for dry flowers. In fact
fresh flowers have very short life, so the concept of dry flowers has originated in
towns and cities. Moreover, dry flowers can also be used for making file covers,
greeting cards, paper weights etc. This industry is flourishing nowadays and
horticulture graduates can grave the opportunity of flower drying as one of the
businesses.
3
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Consultant: As horticulturist, one can act as consultant as well. After acquiring suffienct
education and experience either on production technology or nursery raising, hybrid
seed production technology, one can definitely choose consultancy as his/her business.
They provide expert advice to businesses and fruit growers. They may be specialized
in one area; e.g. nursery crops. Many are self-employed; others work for equipment
companies, pesticide companies or private organizations such as Reliance Foundation.
This may require a minimum of a four-year college degree and sometime Master’s
degree.
Business of essential oils, flavours and fragrances: Floral extracts like essential
oils, alkaloids, pigments, dyes etc., have tremendous demand in both domestic and
international markets. In order to produce the highest quality extracts, highly
sophisticated extraction methods and qualified personnel are required, for which
horticulture graduate can be the best choice.
4
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
its research institutes in the field of horticulture through all India competitive test
followed by an interview.
ACTIVITIES/EXERCISES
Chapter - 2
PRINCIPLES OF PRESERVATION
AND VALUE ADDITION OF
HORTICULTURAL PRODUCE
OBJECTIVES
After studying this chapter, students will be able to:
z Explain the different value added products, which can be made from
horticultural produce
INTRODUCTION
Whenever you go to any market, you find several products such as jam,
jelly, squashes, pickles, murabbah, candy and several other such products. I
hope that most of students might have enjoyed these products at your homes.
Most of us use to purchase these products from shops, however, mothers &
sisters of some students might have made some of these products at home.
Have you ever thought of their raw material from which these are prepared?
How these products keep well for long periods? What processes are involved in
their preservation? I hope you might have never thought of it. All such products
are prepared through processing, preserved for long time by using several
techniques, which are based on certain principles. In this chapter, you will
come to know about processing, several principles involved in preservation of
fruits and vegetables and different value added products, which can be made
from horticultural produce.
6
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Food processing dates back to the prehistoric age when crude processing including
various types of cooking, such as over fire, smoking, steaming, fermenting, sun
drying and preserving with salt were in practice. Foods preserved this way was a
common part of warriors’ and sailors’ diets. These crude processing techniques
remained essentially the same until the advent of the Industrial Revolution. Nicolas
Appert developed a vacuum bottling process to supply food to troops in the French
army, which eventually led to canning in tins by Peter Durand in 1810. Modern food
processing technologies, in the 19th century were also largely developed to serve
military needs. In the early 20th century, the space race, change in food habits and
the quality consciousness of the consumers in the developed world further added to
the development of food processing with advancements such as spray drying, juice
concentrates, freeze drying and the introduction of artificial sweeteners, colourants,
and preservatives. In the late 20th century, products including dried instant soups,
reconstituted fruit juices, and self cooking meals such as ready-to-eat food rations
etc., were developed.
7
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Benefits of Processing
z By processing, raw food and other farm produce is converted into edible,
usable and palatable form.
z Food processing has great potential for export and thereby to fetch foreign
exchange.
Importance of processing
8
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Food preservation, in the broad sense, refers to all the measures taken against any
kind of spoilage in food. It is the process of treating and handling food in such a way
so as to stop or greatly slow down spoilage to prevent foodborne diseases while
maintaining nutritional value, texture and organoleptic quality as well as increasing
shelf life. Proper packaging and storage of processed/preserved products are also
important aspects of agro-processing to retain quality of fresh horticultural produce
which could be adversely affected by physical damage, chemical reactions,
microbiological changes and attack by insects and rodents.
Principles of Preservation
9
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
10
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
11
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Drying Techniques: Several types of dryers and drying methods, each better suited
for a particular situation are commercially used to remove moisture from a wide
variety of food products including fruits and vegetables. There are different types of
drying processes are as follows:
z Solar drying
z Osmotic dehydration
a) High sugar preservation: In the food preservation with sugar, the water
activity cannot be reduced below 0.70. This value is sufficient for bacteria,
yeasts and molds inhibition but does not prevent osmophilic yeasts and
xerophillic molds attack. For this reason, various means are used to avoid
mould development such as finished product pasteurization (jams, jellies,
etc.) and use of chemical preservatives.
c) Use of chemical additives: The Food and Drug Administration (FDA) has
defined food additive as a substance or a mixture of substances, other than
the basic foodstuff, which is present as a result of any aspect of production,
processing, storage or packaging. It comprises of preservatives, antioxidants
and many others. According to FDA, ‘chemical preservative is any substance
which is capable of inhibiting, retarding or arresting the process of
fermentation, acidification or other decomposition of food or masking any
of the evidence of any such process or of neutralizing the acid generated
by any such process but does not include salt, sugars, vinegar, spices or oils
extracted from spices’. Chemical food preservatives are added in very
12
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
small quantities (up to 0.2 per cent) and they do not alter the organoleptic
and physico-chemical properties of the foods. Preservation of food products
containing chemical food preservatives is usually based on the combined
or synergistic activity of several additives, intrinsic product parameters
(e.g. composition, acidity, water activity) and extrinsic factors (e.g.
processing temperature, storage atmosphere and temperature). This
approach minimizes undesirable changes in product properties and reduces
concentration of additives and extent of processing treatments. Chemical
food preservatives are applied to foods as direct additives during processing,
or develop by themselves during processes such as in fermentation. Certain
preservatives have been used either intentionally or accidentally for
centuries, which include sodium chloride (common salt), sugar, acids,
alcohols and components of smoke. In addition to preservation, these
compounds contribute to the quality and identity of the products.
The various preservation methods discussed so far are based on the application
of heat, removal of water, freezing etc. All these methods have the common objective
of reducing the number of living microorganisms in foods or at least holding them in
check against further multiplication. Fermentation processes for preservation
purposes, in contrast, encourage the multiplication of lactic acid forming bacteria
and their metabolic activities in foods. But the organisms that are encouraged are
from a selected group and their metabolic activities and end products are highly
desirable.
The trend of using a wide range of mild preservation techniques has emerged to
be known as combined preservation or barrier (Hurdle) technology. Hurdle in food is
defined as the substance or the processing step or various preservation factors,
inhibiting the growth of various microorganisms resulting in the death of
microorganisms. It advocates the deliberate combination of existing and novel
preservation techniques in order to establish a series of preservative factors (hurdles)
that any microorganisms present should not be able to overcome. It requires a
certain amount of effort from a microorganism to overcome each hurdle. Higher the
13
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
hurdle, greater the effect. Several tropical and sub-tropical fruits and vegetables
like carrot, capsicum and coconut are processed by hurdle technique by slight
reduction of water activity (aw 0.92-0.95), lowering of pH (below 4.5) and mild heat
treatment (in-pack pasteurization at 850C) or treatment with antimicrobial additives
with a view to control microbial growth, packed in flexible polymeric pouches and
are evaluated for their shelf stability under ambient conditions.
i) Jam, Jelly, Marmalade and Preserve: Preparation of jam, jelly and marmalade
is based on concentrating fruits to nearly 70 per cent solids (TSS) by addition of
sugar and heat treatment. The high osmotic pressure of sugar creates unfavourable
conditions for the growth and reproduction of most species of microorganisms
i.e. yeasts, molds and bacteria, responsible for the spoilage of food. At this
concentration of solids, the water activity is reduced (aw of 0.60-0.75), which
ultimately decreases the chances for microbial spoilage.
14
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
pineapple, raspberry etc. can be used only after adding small amount of pectin
powder. The essential substances for manufacture of jelly are pectin, water,
acid and sugar. Formation of jelly takes place when the concentrations of water-
sugar-acid-pectin mixture attain a certain minimum value.
Marmalade is a fruit jelly in which slices of the citrus fruit or its peels are
suspended. Marmalades are generally made from citrus fruits like oranges and
lemons in which shredded peels are suspended.
Preserves (Murabbas) are prepared from whole fruits and vegetables or their
segments by addition of sugar followed by evaporation to a point where microbial
spoilage can’t occur. The final soluble solids concentration reaches to about 70
per cent. The finished product can be stored without hermetic sealing and
refrigeration.
ii) Chutneys and Sauces: Chutney is a mixture of fruit or vegetable with spices,
salt and/or sugar, vinegar etc. A good chutney is smooth, palatable and appetizing,
and has the true single flavour of the fruit or the vegetable used for its
preparation. Most popular chutneys are those from tomato, mango, aonla etc.
On the other hand, a good sauce has a continuous flow with no peel, seeds and
stalks of fruits and/or vegetables. It possesses pleasant taste and aroma. Sauces
are sieved and as a result, are thinner and have smooth consistency than chutneys.
Sauces can be prepared from tomato, papaya etc. Vinegar, salt, sugar and spices
are the common preservatives, used for the preservation of these products.
The chemical preservatives, such as sodium benzoate and potassium
metabisulphite are used for long-term storage, wihich helps in retarding the
growth of microorganisms without interfering with other physico-chemical and
sensory characteristics of the product. Some factors taken into consideration
for the selection of a chemical to be used as a preservative include type of
organism to be controlled, pH of
the product, length and conditions
of product storage and physical
and chemical characteristics of
the food.
15
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Fruit syrup 65 25
Crush 55 25
Squash 40 25
Cordial 30 25
Sweetened juice 10 85
Ready-to-serve (RTS) 10 10
Synthetic syrup/sherbet 65 -
a) Holding pasteurization: After filling of the juice in bottles, the bottles are
pasteurized at 85°C for 25-30 min. This is usually done at home scale.
16
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
c) Flash pasteurization: In this method, fruit juice is heated for a short time
at a temperature higher than the pasteurization temperature and held at
that temperature for about a minute and filled into the containers, which
are sealed airtight.
(i) Alcoholic fermentation- which has already been discussed under fermented
beverages earlier
17
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
earlier. On the other hand, in unfermented pickles, the raw material is preserved
by use of various spices and oil. Most popular unfermented pickles are mango,
lime and mixed pickles.
ii) Essential oils, flavours and fragrances: Floral extracts like essential oils,
alkaloids, pigments, dyes etc., have tremendous demand in both domestic and
international markets. In order to produce
the highest quality extracts, highly
sophisticated extraction methods such as
those based on high pressure extraction
and super critical fluid extraction are used.
Such methods produce very high purity
flavour and spice extracts, fragrant
chemicals as well as pharmaceutical
substances. Compressed gases like CO2,
combine the advantages of both gas and
liquid solvents. They have the density of Essential oils made from flowers
18
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
a liquid but diffuse as a gas and therefore, function like a solvent. This enables
the extraction of sensitive raw materials at gentle temperatures. The resulting
extracts are further purified by fractionation and separation procedures.
iv) Pigments and natural dyes : The anthocyanins, flavanols, carotenoids and
xanthophylls are common plant pigments that are responsible for a variety of
hues we normally observe. These valuable pigments can be isolated and used
for varied applications including pharmaceuticals.
ACTIVITIES/EXERCISES
1. Plan a visit to a food processing industry of your area. Note down the
products, which are made there. Make a list of raw material used for their
manufacturing. Also note down the method of preservation being used.
2. Visit a shop that deals with processed products of fruits and vegetables.
Make a list of products. Note down their chemical composition.
4. Purchase some samples of jam and jelly and try to differentiate them.
19
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
3. Enlist the value added products that can be made from fruits.
Chapter - 3
INTRODUCTION
In the previous chapter, you have studied about some value added products of
fruits, vegetables and flowers. You have also read about some methods of preservation.
In this chapter, you will get acquainted with syruping and brining, commonly used
practices in preservation of some fruits and vegetables. In addition, we will also
discuss about preservatives & their use in preservation of fruit and vegetables products
and flowers. Similarly, discussion will also be held on food colours, their uses and
limitations. Let us first understand what is syrup or brine and what are their uses in
fruit and vegetable industry.
Syrup
Syruping is commonly done in fruits and
A solution of sugar in water is brining in vegetables. The objective of
called a syrup and process of adding syruping and brining is to improve the flavor
syrup in fruit product is called as of product and to serve as a medium of
syruping. White, refined sucrose is heat transfer during canning. Cane sugar or
used for making syrup. Usually, sucrose is used for making syrup while
sucrose syrup is used in canning. common salt is used for making a brine
solution.
Syrup is added to improve the
21
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
flavour and to serve as a heat transfer medium for facilitating processing. Syruping is
done only for fruits.
Strained, hot syrup of concentration 20 to 55° Brix is poured on the fruit. Fruits
rich in acid require more concentrated syrup than less acid fruits. The syrup should
be filled at about 79 to 82°C, leaving a head space of 0.3 to 0.5 cm. Sometimes
citric acid and ascorbic acid are also mixed with the syrup to improve flavour and
nutritional value of the product, respectively.
Brining
22
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Salt (g) Brine concentration (%) Salt (g) Brine concentration (%)
10.0 1 47.33 5
20.4 2 111.11 10
30.92 3 176.47 15
41.66 4
Use of preservatives
Several preservatives are used for keeping fruits, vegetables or flowers in good
conditions for longer time. In general, chemical food preservatives can be classified
as Class I and Class II preservatives. Class I preservatives include common salt, sugar,
dextrose, spices, vinegar and honey. They are mainly natural products, which are
used, in comparatively higher concentrations than Class II preservatives. On the
other hand, Class II preservatives are synthetic chemicals used in small quantities.
Benzoic acid and its salts, sulphur dioxide and salts of sulphurous acid, nitrites and
nitrates, sorbic acid and its salts, propionic acid and its salts, lactic acid and its salts
are commonly used and are called as class II preservative.
23
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Benzoic acid (as sodium benzoate) and its derivatives have a preservative action,
which is stronger against bacteria than on yeasts and moulds. Sorbic acid acts on
moulds and certain yeast species, which in higher dosage levels, also acts on bacteria.
Formic acid is more effective against yeasts and moulds and less on bacteria.
The preservative should never be added in solid form but should be dissolved in
a small quantity of juice or water, and the solution added to the bulk of the product.
If this care is not taken, the solid may settle undissolved at the bottom of the
container with the result that fermentation may start before the action of preservative
begins.
24
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Floral preservatives
In the above paragraphs, we discussed preservatives used for fruits and vegetables
products. These preservatives are not used for extending the vase life of flowers.
For this, different set of preservatives have been recommended. Although several
preservatives have been recommended but sucrose solution, 8-HQC (8-
hydroxyquinoline citrate), silver nitrate, aluminium sulphate, cobalt chloride, physan,
HQS (8-hydroxyquinoline sulphate), STS (silver thiosulphate), copper nitrate etc., are
widely used. These preservatives are used either alone or in combination with other
preservative. The concentration of these preservative also varies from crop-to-crop.
FOOD COLOURS
25
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
e. Tannins: These are colourless or yellow substances, which turn brown when
fruits and vegetables containing them (e.g., brinjal, bottle gourd, apple)
are cut and exposed to air. Thus, tannins are responsible for enzymatic
browning and also for the astringency of foods. Tannins are a complex
mixture of polymeric polyphenolics also known as tannic acid or gallotannic
acid, and derivatives of flavones. They are divided into two major groups:
(i) condensed tannins, e.g., catechins and related compounds, and (ii)
hydrolyzable tannins, e.g., gallic acid (gallotannins) and ellagic acid
(ellagitannins).
26
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
g. Betalains: Betalains are a group of red and yellow pigments found in red
beet (Beta vulgaris) and, to some extent, in cactus fruits, pokeberries and
a number of flowers (Bougainvillea). They resemble the anthocyanins and
flavonoids in structure but unlike them, contain nitrogen. Betalains are
stable in the pH range 4-6 but are degraded by thermal processing as in
canning. Colour in the food may not always come from plant and animal
pigments. It could be due to browning reactions that may be enzymatic or
nonenzymatic.
A number of naturally occurring substances are used for colouring foods. According to
the Fruit Products Order, India (1955), the following natural colouring matters are
permitted to be added to any food.
z Cochineal or carmine
z Carotene and carotenoids
z Chlorophyll
z Lactoflavin
z Caramel
z Annatto
z Ratanjot
z Saffron
z Curcumin
Dehydrated beet powder, carrot oil and juices of fruits (e.g., strawberries and
cherries), which impart a pink colour to ice-crearn are also approved as natural
colour additives.
B. Synthetic colours
Only pigments from natural sources were available and used for colouring food till
27
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
the coming of the first coal tar dye in 1857. Thereafter, a large number of dyes were
synthesized and some were used as food colourants. However, gradually restrictions
have been placed on their use as food additives in many countries. In India, no coal
tar dyes or a mixture thereof, except the following are permitted to be used in food
(F.P.O., 1955).
Although colours make the food attractive, it is better to avoid their use as far
as possible and educate the consumer to use products not containing colourants.
Colours can often be used to cover defects in the natural products.
ACTIVITIES/EXERCISES
1. Plan a visit to a food processing industry of your area. Note down the
products which are made there. Note down the colour and whether it is of
natural or synthetic origin.
3. Take help of your mother or sister for preparation of syrups and brines
at your home. Preserve locally grown vegetable or fruits in these
solutions.
28
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
1. What is syrup and brine? How can you prepare syrups and brines of different
concentration?
29
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
30
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Chapter - 4
URBAN HORTICULTURE
OBJECTIVES
After reading this chapter, students will be able to:
INTRODUCTION
During the recent years, there has been a rapid increase in urbanisation and
industrialization throughout the world, due to which the cultivable land for
horticultural crops is also diminishing day-by-day. As a result, the concept of unban
and peri-urban horticulture came in to existence. Although, it has become an integral
part of several advanced countries, but in India, it has also started expanding because
of great desire of urban population for safe food and pollution-free environment.
Urban and peri-urban horticulture opportunities are emerging in urban areas as demand
for fresh fruits, vegetables are increasing. Roof and terrace gardening is finding now
place to get fresh fruits, vegetables and flowers, and also for environmental services.
Vegetable production has expanded in and around cities in many developing countries
as an informal activity practiced by poor and landless city dwellers. The broad
diversity of horticultural crop species allows year-round production, improved
employment and income. Growers have realised that intensive horticulture can be
practiced on small plots, making efficient use of limited water and land resources.
Horticultural crops, as opposed to other food crops, have a considerable yield potential
and can provide up to 50 kg of fresh produce per m2 area per year depending upon
the technology applied. In addition, due to their short cycle, they provide a quick
and emergency needs for food. Leafy vegetables provide a quick return to meet a
family's daily cash requirements for purchasing food. Leafy vegetables are particularly
perishable and post-harvest losses can be reduced significantly when production is
located close to consumers. Mushroom centres, which do not need land, can be a
31
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
most promising activity in urban and peri-urban areas. Evidently, there is an accelerated
production of mushroom around metropolitan cities. There are new practices to
grow cucurbits on the arches created on the pathways, utilising the zero-land for
additional production.
In this chapter, you will learn about the components of UPH, its benefits and
challenges. Read it carefully and adopt this type of culture to boost production and
productivity of horticultural crops for your own benefit and for the benefit of society
and surroundings.
What is UPH?
32
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Almost all the vegetables can be grown in urban and peri-urban areas, depending
upon tha availability of land, resources and demand of consumers in such areas. For
instance, in metropolitan cities like Delhi, Mumbai, Chennai, Kolkata etc., vegetables
remain in high demand and farmers of peri-urban areas of such cities can get premium
price for the vegetables they grow. Similarly, near cities, there is always a great
demand for cut flowers. Hence, farmers near big cities or towns should grow roses,
gladiolus, gerbera, carnation etc. on a large scale to meet the demand of such cities.
It will help not only the consumers for getting fresh produce but farmers will also get
premium price of their produce. The package of practices for growing above
mentioned vegetables or flowers have been discussed in different books on
horticulture.
2. Roof gardening
In big towns and cities, availability of cultivable land is a big problem. In spite
of this, horticulture can be taken as one of the enterprises in such areas as well by
growing horticultural plants on the roof of house or balcony. Roof garden is one of
popular alternatives in urban areas, because of the limited available space in the
grounds of a house. However, care should be exercised to confirm that the roof of
the house is strong enough to bear the heavy load of soil and potted plants. In roof
garden, potted plants like cacti and succulents, chrysanthemums, dahlias, orchids,
bougainvillea, roses, seasonal flowers and several kinds of shrubs and herbs can be
grown. Besides, the vegetable
crops such as tomato, brinjal,
chillies, beans, leafy vegetables
and gourds can also be grown. In a
strong roof structure with
waterproof system, the area can
be laid out with lawns and
herbaceous borders which require
at least 30 to 45 cm soil depth.
A view of roof garden Such planting can be done by
33
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
placing the soil between the outer wall or the parapet and the wall built on the inner
side of the roof. To prevent seepage of water, the roof is to be treated with a
bitumen compound or fitted with moisture-proof wood shutters. Polythene sheets
may also be used for this purpose. It is a good idea to have some other colour of the
roof than the traditional off-black on the surface. Colours like green, brown or soft
red can be a good choice. Similarly, some framework or screening devices can also
be used for enhancing the beauty of the roof garden. Hence, free-standing trellis or
wall-attached trellis may be erected for supporting plants.
In the roof garden, few large permanent shrubs and climbers should also be
grown. For this, tubs and boxes of different sizes and shapes are helpful for growing
such plants. With main tubs and boxes, smaller pots and boxes can be arranged along
with hanging basket, which will further aid in the beauty of roof garden. Similarly,
ornamental stones, sculptures and other decorative pieces may be suitably arranged
in the roof garden. However, all this depends on the interest of the growers/gardener,
availability of material in the vicinity and financial status of the grower.
3. Kitchen gardening
Kalan lemon and papaya can be easily grown. Similarly one grapevine can be trained
to wall of house. On side rows of kitchen garden, a row of roses, gladiolus or
chrysanthemum or any other seasonal flowers can be grown to make kitchen garden
more attractive and to meet the demands of your family.
34
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
4. Terrace gardening
5. Landscape gardening
35
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
an integral part of UPH in countries like India. In India, trees like banyan, peepal
(Ficus religiosa), pilkhan (Ficus infectoria), maple, juniper are well suited to bonsai.
Living walls are nothing but walls covered with living plants. They are also
referred to as vertical gardens. Usually climbers are used for creating living walls.
We have always witnessed hue and cry for drinking water especially during
summer in big towns and cities in India. People strive hard for getting drinking
water. Hence, growing of horticultural crops in UPH with meager amount of irrigation
water poses a great problem to the grower. Hence, growers are forced to use
untreated waste water for irrigation. Another reason for using such type of water is
that farmers find it cheaper than pumping ground water to irrigate crops. However,
re-use of wastewater for irrigation is likely to be most prevalent in areas where
water from other sources is scarce for part or all of the year. High content of
nutrients in wastewater, particularly nitrogen and phosphorus, which can increase
the productivity of farming provides another strong incentive for re-use of such
water. However, it is strongly emphasized that due to scarcity of water, emphasis
should be given on water harvesting, recycling and re-use of water in urban and peri-
urban areas to grow different horticultural crops satisfactorily. Similarly, to prevent
potential negative impacts on human health and the environment, the importance of
waste water reuse in urban and peri-urban horticulture has to be recognised and clear
cut policy guidelines for reuse of such water need to be established by the government.
36
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
37
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Challenges in UPH
z Greater competition for natural resources like soil and water.
z For the viability of UPH, availability of sufficient and good land is must,
which will become a limiting factor due to increased urbanization.
ACTIVITIES/EXERCISES
2. Visit a flower show and make a list of plants grown in hanging baskets,
potted plants and flowering annuals.
3. Plan a visit to some big town or a city and observe some building where
roof gardening is practiced. Make a list of plants grown in it.
1. Define UPH. Enlist various components of UPH and describe briefly about
bonsai, kitchen and roof gardening.
WRITE TRUE (T) AND FALSE (F) FOR THE FOLLOWING STATEMENTS
38
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
ii. Availability of cultivable land and quality irrigation is not a limiting factor
in UPH.
vi. On one side, consumption of fruits and vegetables is good for health, yet
on another side fruits and vegetables produced in UPH may deteriorate it.
vii. Availability of sufficient and good land will become a limiting factor for
UPH in the years to come.
z Sumangla, H.P., Malhotra, S.K. and Chowdappa, P. (2013). Urban and peri-
urban horticulture- a perspective. Confederation of Horticulture Associations
of India, New Delhi.
39
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Chapter - 5
WEEDS OF HORTICULTURAL
CROPS AND THEIR MANAGEMENT
OBJECTIVES
After reading this chapter, students will be able to:
z Classify herbicides on the basis of their mode of action and life cycle
INTRODUCTION
When you visit any vegetable garden, fruit or vegetable or ornamental plants
nursery or a fruit orchard, you might have observed that few plants are growing in
such places other than main crop. Such
odd plants can be found growing in Points to remember
between the interspaces of tress, on z Weeds are unwanted plants growing
bunds or in a vegetable garden or a fruit in a vegetable field, nursery or a fruit
orchard.
plant nursery. These plants are of no
economic importance to a grower z Weeds cause enormous losses to
main crop by competing for water
because they compete for several
and nutrition.
amenities such as water, nutrition with
z Weed can be controlled by differ-
main crop and may also harvour several
ent means but use of weedcides is
insect-pest and pathogens, resulting in the best possible method.
reduction in the yield of main crop. Such
unwanted plants, growing out of place are called as ‘weeds’. In this chapter, you will
read about weeds, their classification, herbicides used for control of weeds and
several other methods of weed control in horticultural crops.
What is a Weed?
Any plant growing out of its proper place or where it is not wanted/ desired is
called as a weed or weeds are the plants out of place in cultivated fields, lawns or
orchards etc.
40
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Disadvantages of weeds
z Weeds reduce the economic yield by competing for water, nutrition, light,
space and air with main crop.
z Weeds create difficulty while carrying out cultural practices like hoeing,
irrigation and harvesting in the field.
z The weeds are very competitive in nature and are better adapted to the
areas, where they grow. For example, dib grass (Typha latifolia) and motha
(Cyprus rotundus) are capable of suppressing the growth of horticultural
plants in early years of planting. Some climbers as weeds like chhibber
(Cucumis trigonus) spread on the canopy of fruit plants and check the light
penetration completely in the fruit plants. Most of the newly planted fruit
plants get killed due to the over powering of Karari (Convolvulus arvensis)
and chhibber (Cucumis trigonus) climbers.
z Some weeds due to their rhizomes in soil like baru grass (Sorghum
halepense) and knots of motha (Cyprus rotundus) resist their eradication.
Weeds like ltsit (Trianthema portulacasirumi) and chulai (Amaranthus
viridis) have very high rate of seed production.
z Several weeds act as alternate hosts to many serious pests and diseases.
They may harvour insects-pests and act as secondary hosts for spread of
several diseases. For example, Cynodon dactylon (doob grass) and Cyprus
rotundus (Motha) are alternate hosts of grass hopper. Similarly, 'wild senji'
and 'maina' are hosts of aphids. Parthenium hysterophorus (congress grass)
acts as alternate host for mealy bugs, which attack mango, guava, pear and
many other horticultural plants.
z Some weeds are injurious to animal and human health. For example,
Parthenium and Datura seeds are poisonous in nature and may cause allergy
to human beings.
Classification of weeds
A. Annual Weeds
41
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
(i) Kharif Annuals : These weeds generally emerge in monsoon, i.e., from June to
October e.g., Cyprus rotundus (Motha/Deela) and Trianthema postulacastrum
(Itsit).
B. Biennial Weeds
Sorghum helpense Cyprus rotundus
These weeds take two seasons to
complete their life cycle. In the first
season, vegetative growth is completed
and in the second season, flowering and
seeding take place. These weeds are
found in abundant in the orchards. For
example, Daucus carota (wild carrot)
and Launea nudicaulis (wild cabbage) Wild senji Parthenium
C. Perennial Weeds
Such weeds grow for two or more years in orchards or on their boundries, paths
and along roads sides. These weeds propagate through stolons, root cuttings, suckers,
rhizomes or seeds. For example, Sorghum helpense, Cyprus rotundus, Convolvulus
arvensis and Parthenium hysterophorus (Table 1 and 2).
42
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
43
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Sapota Setaria glauca, Digitaria marginata, Bidens pilosa, Blumea spp., Oxalis
Androprogon spp corniculata
Apple Cynodon dactylon, Cyperus rotundus Rosa rubignosa, Berberis sp., Oxalis
latifolia, Elymus repens
Weeds of the horticultural crops can be controlled by by (i) Chemicals and (ii)
Non-chemical methods. Non-chemical method includes (a) biological, (b) mechanical
and (c) cultural techniques.
1. Preventive Methods
The best method is to prevent the entry of new weed and weed seeds in the
cultivable area. While sowing seeds of annuals or any vegetables or while purchasing
nursery plants, ensure that none of the planting material contains any seed or plant
of any kind of weed. No weed plant should come along the earth balls of fruit plant
sapling. It has been observed that new weeds come along with the seeds of
vegetables, annuals or earth balls of fruit sapling at the time of planting. Similarly,
weeds growing in the garden, nursery or in orchard should not be allowed to
flower and set seeds. Do not use farm yard manure, which may contain weeds
seeds. Clean the machinery/tractor while using it in an orchard so that weeds
seeds do not enter in the orchard. Keep water channels, paths, roads and boundaries
of beds clear of weeds. This will prevent the infestation of weeds in the nursery,
gardens or orchards.
44
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
2. Eradication
Complete elimination of weeds plants, plant parts and seeds from the vicinity
of a nursery, field or orchard and its vicinity, shall help in the eradication of weeds.
However, it is not possible to eradicate all the weeds from any area. However, one
may attempt/try and achieve some result in doing so.
3. Control
For weed control, some practices, such as, chemicals or non-chemical are used,
which may reduce the weed population to the lowest level. The weed control
method may comprise of physical, mechanical and chemical means.
A. Mechanical Methods
This involves hand pulling, hoeing, tillage, mowing and smothering of weeds
with non-living mulches. This is a very effective method of weed control from
nurseries, fields and orchards. No injury is caused to the foliage of main plants.
Hand pulling involved uprooting of weed manually or hoeing with khurpi or
spade. The basins of the tree can be covered with black polythene (plastic
film) after hoeing, which will prevent photosynthesis in the sprouting weeds
and check further growth and reproduction of weeds. Simultaneously, polythene
film shall check the loss of moisture from plant basins and shall help in moisture
conservation as well.
B. Biological Methods
Some insects as natural enemies, disease organisms, parasite plants and selective
grazing by livestock come under this method of weed control. Insects and disease
organisms have been the most successful natural enemies of weeds. The principles
involved in selection of biotic agent are:
z Biotic agent should be host specific. The agent should not attack any plant
species other than those for which it is released.
45
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
C. Chemical Methods
Only those chemicals are used for which the standing crop has a high degree of
resistance or tolerance. Several types of chemicals may be used on the basis of their
effect on weeds and crops as discussed below.
a. Contact herbicides: These chemicals kill the plant tissues with which they
come into contact, but do not move in the plant to any extent. Such
herbicides are either (a) selective or (b) non-selective. A selective herbicide
kills certain weed species with little or no injury to other plant species. A
nonselective weedicide kills all the weeds covered by spraying e.g.,
chlorates, dinitrophenol and pentachlorophenol.
46
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Most herbicides are usually commercial formulations that contain the herbicides
and can be (i) dissolved, emulsified or suspended in a liquid carrier, or (ii) distributed
dry by a spreader or by hand, and (iii) injected into soil for vaporization and
fumigation. Herbicides belong to the following major groups:
A. Phenoxyacetic acids
2,4-D; 2,4, 5-T and MCPA are most important selective herbicides used to
control broad-leaved weeds in horticultural crops. The toxic symptoms of this
group are visible within a few hours of application as bending and twisting of
shoots, dropping of leaves and yellowing. Phenoxy compounds are formulated as
under:
a. Amine salts : Amine salts of 2,4-D are commonly used as liquids. These are
highly soluble in water and have a power of penetration more than sodium
salt but less than ester.
47
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
g. Sodium salts : The sodium salt of 2, 4-D is only four per cent water soluble
and hence is less likely to penetrate through either cuticle or stomatas of
the plants.
h. Halogenated aliphatic acids : These are more toxic to grasses than broad
leaved weeds. TCA (Trichloroacetic acid) and Dalapon (2, 2-
dichloropropionic acid) are examples of this group, which are applied to
the soil and the foliage depending upon their solubility in water. These are
generally used in uncropped lands for the control of deep rooted weeds
like kans, baru and doob in the orchards.
B. Amids
CDAA or Randox and and MH (maleic hydrazide) are important chemicals of this
group.
Dalapon : This herbicide is similar to TCA in properties. It has proved less erratic and
more effective than TCA when applied as a foliage-spray for the control of most of
the annual grasses. It is much more effective on doob, baru and other perennial
grasses.
Trichloroacetate : The sodium salt of TCA is widely used. It has shown varying
degrees of effectiveness in controlling doob, baru and other annual and perennial
grasses. Best results are obtained when it is applied in combination with tillage and
cultural practices.
C. Substituted urea
Cotoran : It is a selective herbicide with a long residual action, lasting over 2-5
months and specially recommended for the control of weeds in perennial plants.
48
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Diuron : It has been used successfully in horticultural plants @ 0.5-5.0 kg/ha. It is also
being effectively used as soil sterilant and is preferred over monuron in areas of high
rainfall or on light sandy soils.
Monuron : It is used both as soil sterilant and for selective annual weed control in
resistant crops. For selective weed control purpose, the rate varies from 0.5-5:0 kg/
ha as pre-emergence and as soil sterilent, the rate varies from 5-10 kg/ha.
D. Carbamates
These are effective through soil medium, are highly volatile and are therefore
incorporated immediately after application. These are grouped as below:
CDEC : It has shown promise for the pre-emergence control of certain weeds in
vegetable crops. It is more effective on grasses than on broad-leaved weeds.
Eptam: It has been successfully used as a pre-sowing herbicide for control of grassy
weeds as they germinate.
For example, if a herbicide with 50% active ingredient (a.i.) has to be applied @ of
1.0 kg a.i./ha then 1 x 100/50 = 2 kg of the commercial product will be required.
49
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
z Sprayer used for herbicides should not be used for any other kind of spray
on crop or ornamental plant.
z It is necessary to clean the sprayer with warm water every time after use.
z Put mask on your nose and cover your mouth with mask during spray.
Although, there is no clear cut recommendation for the use of herbicides on the
basis of the response of horticultural plants because there is a long list of horticultural
plants, their weeds and recommended herbicides. However, horticultural plants have
been classed into six categories depending on their response to herbicides. Among
the monocotyledonous plants there are three classes :
(i) Annual crops (e.g., Flowering annuals.): For control of weeds, use of
chlorophenoxy, substituted ureas, triazines and benzoic is recommended.
Although, it is very difficult to give some clear cut recommendation.
50
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Among the dicotyledonous plants again three classes have been suggested on the
basis of their response to herbicides :
(iii) Woody perennials (e.g., fruit trees, forest trees, rubber, tea, coffee,
fruiting and ornamental shrubs). Herbicides, which may be used with
safety are triazines, substituted ureas, phenols, amitrole (avoid foliage).
Use 2, 4-D, simazine, diuron, amitrole, paraquat and dalapon for controlling
weeds round plantation tree crop like rubber, tea, coffee, cocoa etc. The trees may
be killed with 2, 4, 5-T or arsenic. For berries and grapes triazines, substituted
ureas, and dinitrosas are safe herbicides for the control of weeds in their orchards.
Plants are usually resistant when dormant or after fruit harvest be the best time for
herbicide application for bushy fruits, which have shallow root system. Avoid the
time when the plants are in bloom, fruit formation stage or in active vegetative
growth. Chemicals should be used around the base of trees where cultivation is
undesirable. Citrus trees are very susceptible to dalapon but resistant to diuron. Oils
fortified with DNBP (4, 6-dinitro-O- butyl phenol) may be used in citrus orchard.
Strawberries may be treated with sesone and simazine as pre-emergence treatments
and with 2, 4-D as dormant sprays.
51
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
plants as much as possible. Simazine is not harmful to maize and may be used to
control all types of annual weeds in maize fields. Use of dalapon is done only when
the trees are dormant. Glyphosate is useful against perennial weeds, and can be
effectively used in citrus, and grape orchards. Currant bushes may tolerate 10 kg/ha,
gooseberries and raspberries tolerate much less (only 1 kg/ha).
ACTIVITIES/EXERCISES
1. Visit a fruit plant nursery and make a list of odd plants (weeds) and find out
the local names of the weeds.
3. Go to a market and make a list of herbicides specially used for the control
of weeds in horticultural crops.
5. What care will you take while using bioagents for controlling weeds?
z Spray drifts of herbicides may cause injury to plant on which they fall.
52
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
z Chadha, K.L. and Awasthi, R.P. (2005). Apple. Malhotra Publishing House,
New Delhi.
z Sharma, R.R. (2006). Fruit production: Problems and solutions. Intl. Book
Distributing Co., Lucknow, India.
z Sharma, K.K. and Singh, N.P. (2011). Soil and orchard management. Daya
Publishing House, New Delhi.
53
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Chapter - 6
METHODS OF PROPAGATION OF
HORTICULTURAL CROPS
OBJECTIVES
After reading this chapter, the students will be able to:
z Enlist the advantages and disadvantages of sexual and asexual methods of
propagation
z Explain the principles involved in sexual and asexual methods of propagation
z Demonstrate vegetative propagation methods used in the nursery
z Plan a business based on propogation & nursery management of horticultaral
plants
INTRODUCTION
Propagation i.e. multiplication is the law of nature. Every ones, which comes in
this universe produces individual of its own kind. Like animals, plants also multiply of
their own by one or the other methods. However, man has developed several
techniques of multiplication of plants for his own benefits. For propagation of plants,
several principles are involved. In this chapter, attempts have been made to tell you
about the principles of seed (sexual) and vegetative (asexual) methods of propagation.
In addition, light will also be thrown on micropropagation.
A. Sexual Propagation
54
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
are produced from seeds are called seedlings. In ancient times when the asexual
methods of plant propagation were not known this was the only commercial method
for plant propagation. Papaya, phalsa and mangosteen are still being propagated by
seed.
z Seedling trees are generally long-lived, bear more heavily and are
comparatively more hardy.
z To develop new varieties, hybrids are first raised from seeds and it is
essential to employ this method in such cases.
z Rootstocks upon which the fruit varieties are budded or grafted are mostly
raised from seeds.
z Seedling trees are not uniform in their growth, yielding capacity and fruit
quality.
z Seedling trees have long juvenile period and take more years to bear the
first crop.
55
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
B. Asexual Propagation
z It is possible to regulate the tree size, fruit quality, precocity etc., according
to one's requirements by using different rootstocks.
z One can correct (to some extent) the initial mistakes of planting inferior or
unsuitable varieties.
z Fruit plants producing seedless fruits such as banana can only be multiplied
through vegetative means.
56
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Propagation by Seed
In fruit plants, the propagation by seed is primarily done to raise rootstocks
required for producing grafted or budded plants. However, some fruit plants (papaya)
are conventionally propagated by seeds. Propagation through seeds requires a
knowledge of several principles as described hereunder:
Dormancy : The dormancy in seeds may be due to hard seed coat, impermeability
to water and gases, physiological immaturity of embryo, deficiency of some
endogenous growth promoters or excess of endogenous growth inhibitors. Different
methods like stratification, scarification and chemical treatment are used for breaking
dormancy in seed to improve germination. Stratification consists of keeping seeds
at low temperature (around 7OC) by placing them in alternate layers of moist sand.
While, in scarification, the seeds are either treated with concentrated acid (acid
scarification) or the seed coat is weakened mechanically, so as to make it permeable
to water and gasses. In other instances, seeds can be pre-treated with some chemicals
like thiourea or potassium nitrate to improve seed germination. Soaking seeds in
water also overcome seed dormancy, if it is primarily due to endogenous growth
inhibitors, which leaches due to prolonged soaking of seeds.
Germination : Germination refers to the emergence of a new plant from the mature
seed. In other words, the activation of metabolic machinery of the embryo leading
to the emergence of a new seedling plant is known as ‘germination’. For the
germination to be initiated, the seed must be viable, that is, the embryo must be
alive and capable of germination and the environmental conditions must be
appropriate. Seed germination involves different phases of germination. These
phases are characterized by a rapid increase in water uptake during the imbibition
phase followed by a period where there is little water uptake called the lag phase.
During the third phase, there is increase in fresh weight of seed, which leads to the
emergence of roots.
57
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
male and female gametes and is called gametic or sexual embryo, whereas the
others are produced by simple mitotic division of cells of nucellus without the help
of male gamete in their formation. The phenomenon of nucellar embryo is of
common occurrence in citrus and mango.
In general, the nucellar seedlings are identified or in other words the zygotic seedlings
are rouged out of nursery in step-by-step approach. In this method, the majority of
the seedlings, which fall within one vigour group and are more or less of the same
size, are considered to be nucellar. Others, which are either too small or too tall
than the commonly prevailing type are discarded and considered to be off type or
zygotic. To eliminate gametic seedlings, first rouging should be done when they are
about 10 to 20 cm tall and ready for transplanting in the nursery. The second rouging
should be done at time of budding, while third and final rouging should be done at
time of selecting budded plants for transplanting in the field.
Vegetative Propagation
The propagation of plants by the method other than sexual propagation is
referred as vegetative or asexual propagation. It involves no change in genetic
makeup of the new plant. All the characteristics of the parent plant are reproduced
in the daughter plant due to exact duplication of chromosomes during cell division.
Thus, the plants are true-to type in growth, yield, ripening, and fruit quality.
There are different methods, which can be used for commercial multiplication
of various fruit plants. These include cutting, layering, budding and grafting.
Cuttings
58
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
cuttings. The shoots of about one-year-old or more can easily be used for preparing
hardwood cuttings. In case of decidous fruit plants such as grape, pomegranate,
phalsa and fig, the cuttings are made after pruning. While in evergreen fruit plants
like baramasi lemon, the cuttings can be prepared during the spring (February -
March) and rainy season (August-September). Generally, the cuttings of 15-20 cm
length and having 3-5 buds are made. The lower cut is given in a slanting manner just
below the bud to increase the absorption of nutrients. The upper cut is given at a
right angle to reduce the size of the wound and as far as possible away from the
upper bud to avoid its drying. After the cuttings are prepared, they should be allowed
to dry. These cuttings are usually tied in small bundles (20-25 cuttings) and buried in
moist soil/sand for a certain period for healing of wounds, which is known as callusing.
Layering
59
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Budding
Budding is a method in which only one bud is inserted in the rootstock. This method
is very easy and fast. This method saves budwood as compared to grafting. As soon
as the bark starts slipping both on the stock and scion, this is considered to be the
optimum time for budding. This shows that the cambium, which is the tissue
responsible for union, is active. This method is generally employed during spring and
rainy season. The common methods of budding are T-budding, patch budding, and
chip budding.
1. T-Budding : This is also known as shield budding. A horizontal cut about 1/3rd the
distance around the stock is given on the stock 15-20cm above then ground level.
Another vertical cut, 2-3 cm in length is made down from the middle of the horizontal
60
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
cut and flaps of the bark are loosened with ivory end
of the budding knife to receive the bud. After the 'T'
out has been made in the stock, the bud is removed
from the budstick. To remove the shield of bark
containing the bud, a slicing cut is started at a point on
the bud- stick about 1.25 cm below the bud, continuing
underneath about 2.5 cm above the bud. A second
horizontal cut is then made 1.25 to 2 cm above the
bud, thus permitting the removal of the shield piece.
The shield is removed along with a very thin slice of
T budding in citrus wood. The shield is then pushed under the two raised
flaps of bark until its upper horizontal cut matches the same cut on the stock. The
shield should fix properly in place, well covered by the two flaps of bark, but the
bud itself exposed. The bud union should be wrapped with polythene strip to hold
the two components firmly together until the union is completed. ‘T’ budding can be
performed at any time of the year provided cell sap flows freely.
61
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
3. Chip Budding : This method is usually employed when the stock and scion are still
dormant, that is just before the start of new growth. In this method, one about 2.5
cm long slanting cut is given into the stock followed by another cut at lower end of
this first cut, in such a way that a chip of bark is removed from the stock. The bud
from the scion wood is removed in the same way so that it matches the cuts given in
the rootstock. This chip with a bud on it is fitted smoothly into the cut made in the
rootstock taking care that the cambium layers of the stock and scion unite at least on
one side. The bud is then tied and wrapped with polythene strip, to prevent drying
up of the bud.
Grafting
2. Cleft grafting : This is also known as wedge grafting. This method is useful in the
nursery where the rootstock is quite thicker than scion and tongue grafting cannot
be employed successfully. The stock up to 8 cm in thickness can be grafted with this
method. The rootstock to be grafted is cut smoothly with a secateur or saw. It is
then split in the middle down to about 4 cm. The budstick having 3 to 4 buds is
trimmed like a wedge at the lower end with outer side slightly broader than the
inner side. The lower bud on the scion should be located just well in to the stock
62
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
making sure that the cambium layers of both the stock and scion are perfectly
matched. Cleft grafting is done during dormant period.
After the completion of the grafting operation, a part of the top of rootstock is
removed to encourage growth of the scion. When the scion has sprouted and its
leaves turned green, the root stock portion above the graft union should be cut
away. Side grafting can be carried out successfully from March to October; but
success during the May and October is rather low. This method of propagation is
commonly used in mango.
63
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
64
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
3. Slips : Slips are shoots just arising below the crown but above the ground. Pineapple
is commercially propagated through this method of propagation.
65
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
The process of germination, factors affecting the germination process and other
principles involved in seed propagation are given in detail in the previous chapters.
Some vegetables are raised by vegetative methods also (Table 1).
66
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
also propagated from other structures like offset, bulblet, cormlet, bulbils and scales
etc (Table 3).
67
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Micropropagation
3. Small tissue is required as an explant, hence saves the scion wood to a great
extent.
68
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
11. In vitro systems have the potential for long-term transportation or shipment
of propagation material.
There are four main stages involved in micropropagation of plants, such as explant
establishment, shoot proliferation, rooting of shoots, hardening and transfer of plantlets
to soil/field.
69
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
3) Rooting of shoots- The in vitro regenerated shoots are rooted in the medium
containing auxins like NAA, IBA. The rooting can also be induced when in vitro
shoots are exposed to stress conditions. The
rooting should also be preferably without
formation of callus, thus avoiding somaclonal
variants.
Micropropagation Techniques
70
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
71
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Limitations of micropropagation
The tissue culture plants need acclimatization or hardening before they are transferred
in the field. The acclimatization is necessary because there is a vast variation in the
environment surrounded by in vitro plants and the field environment. In culture
vessels the in vitro plants are exposed to high humidity, hetrotrophic mode of
nutrition, high ethylene concentration and constant temperature throughout the year.
72
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
These conditions lead to the development of plants having low epicuticular wax,
low stomatal density and stomatal malfunction, which make these plants more
vulnerable to mortality in field conditions. To prevent this mortality, it is must to
harden or acclimatize tissue culture plants.
To have success in hardening of tissue culture plants, the following approaches are
adopted:
1. Balanced proportion of roots and shoots should be maintained in
micropropagated plantlets.
2. Appropriate rooting media should be used for establishment of plants ex vitro.
3. Balanced nutrition should be provided for better survival of rooted plantlets.
4. Simultaneous rooting and acclimatization must be attempted.
5. Cleaning of gelling agents from roots before transfer to rooting media.
6. Moisture content or humidity around the transferred plantlets should be high.
ACTIVITIES/EXERCISES
z Try to perform 'T' budding, air layering, side veneer grafting in horticultural
plants propagated by these methods.
73
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
z Bose, T.K., Mitra, S.K., Sadhu, M.K. and Das, P. (1997). Propagation of
tropical and sub-tropical horticultural crops. 2nd Edition, Naya Prakash,
Kolkata.
z Sharma, R.R. & Krishna, H. (2013). Textbook on plant propagation & nursery
management. Intl. Book Distributing Co., Lucknow, India.
z Hartman, H.T, Kester, D.E. and Davies, F.T. (1993). Plant propagation:
Principles and Practices. 5th Edition. Prentice Hall of India, New Delhi.
74
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Chapter - 7
INTRODUCTION
It is always a matter of discussion among the scientists and farmers that although
we are the largest producers of fruits (73.9 MT) and vegetables (139.8 MT) in the
world but the productivity of most of the fruits and vegetables in our country is low
in comparison to other countries of the world. Several reasons are quoted for low
productivity but the major reason is that most of our orchards are old and declining,
and quality planting material for new orchards is not available. In spite of having
around 440 hundred fruit plant nurseries in our country, paucity of good plant material
is really a matter of great surprise. What could be the reasons for it? We do not
follow the rules and regulations or we do not use proper nursery production, protection
tools for producing quality planting material. In this chapter, we will discuss about
the management of modern nursery, nursery registration act, and nursery practices
to be followed for producing a quality planting material.
75
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
for quality planting material has increased manifold throughout the country in the
recent past. However, the greatest bottleneck in the expansion of area under fruits
is the non-availability of genuine and quality planting material in adequate quantity
from reliable government nurseries. More often than not, the farmers depend much
on the unregulated and unmonitored private sector nurseries and this practice is
causing great harm to the fruit industry of the country. The existing nurseries lack
modern infrastructure such as greenhouses, mist chambers, efficient nursery tools
and gadgets, implements and machinery.
Keeping in view the present area and the trends in expansion of area under
different fruits in India and also the necessity of renewal of old and non-performing
orchards, the requirement of nursery plants of different fruits in India would be very
high, which can only be met after following standard practices in nursery for the
production of quality planting material. .
In the previous chapter, you have read about different methods of propagation
of horticultural plants. If you have read this chapter carefully, you might have come
to know that most of the fruit plants are raised through vegetative methods of
propagation such as cutting, layering, budding and grafting because fruit plants are
highly heterozygous and propagation through seeds brings about greater variability
in the progeny. To remind you about some of most important methods of propagation
of fruits are: ‘T’ budding in citrus and ber, air layering in litchi and guava, hardwood
cuttings in grape, epicotyl grafting in mango in Konkan region and runners in strawberry.
So the above mentioned material is the planting material for these fruit plants.
However, some fruit plants such as papaya, jamun and phalsa are still raised by
seeds, because no method of vegetative propagation has been much successful.
Similarly, rootstocks for budding and grafting in fruit plants are raised through seeds,
yet few rootstocks (e.g. clonal apple rootstocks) are raised by vegetative means,
primarily by stooling. Some horticultural plants are raised by micropropagation (papaya,
76
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
strawberry, banana etc.) and some by specialized vegetative structures such as corms,
tubers, runners, offsets etc.
The planting material for most of annual flowers and vegetables crops is seed
only. However, some vegetables such as asparagus, basella, garlic, potato, yam etc.,
are raised successfully through vegetative methods. Similarly, several ornamental,
especially flowering annuals are propagated by seeds, whereas some ornamental
plants such as canna (rhizomes), bougainvillea (hardwood cuttings), ferns (spores),
dahlia (leaf cuttings), tuberose (bulb) are propagated by vegetative means. Further,
ornamental trees and shrubs are propagated by seeds and several methods of
vegetative propagation, which act as propagaule for them, respectively.
Nursery development has great scope for enhancing the production and
profitability of fruit crops in India because of poor yields and overall low productivity,
year to year fluctuations in production, poor quality of produce and non-availability
of quality planting material. The modern era of horticultural development is known
for effective utilization of hi-tech interventions for different aspects. Hi-tech
interventions in nursery establishment are technological advancements, which are
capital intensive, minimally environment dependent and useful in rapid multiplication
of planting material of fruit plants.
Nursery management is a technical and skill oriented job, which require proper
attention at different stages of production of quality planting material. Setting up of
a fruit nursery is a long term and capital intensive venture. It needs lot of planning,
expertise and efficient management for the production of quality planting material.
Mistakes committed initially in the establishment of a nursery can not be rectified
easily at later stages; moreover, it reduces the returns greatly as well, which results
in wastage of time and energy. Therefore, careful planning is needed before
establishment of a nursery. The nurseryman should prepare a layout of the proposed
nursery, which should include allocation of plots/area to different components of
the nursery such as mother orchards of different fruits/cultivars, rootstock banks,
nursery beds, roads/paths, water channels, drainage system, buildings/other structures,
etc. Provision of certain basic pre-requisites must be made for the establishment of
a fruit nursery on modern lines.
77
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Technical Knowledge
Nursery Registration
In order to regulate the quality of nursery plants, the fixing of nursery standards
and to bring the fruit nurseries under the ambient of nursery certification is very
important. Fixing of nursery standard and certification of nursery stock are the twin
services, which are highly valuable from customer's point of view. While nursery
standards ensure the supply of healthy, disease-free and commercial grade plants to
the customers, setting of certified nursery stock protects the customers against planting
poor quality and undesirable varieties.
Certification of nursery means that the nursery plants have been checked and
identified as true-to-type by the competent authority. For the purpose of certification,
the plants shall have to be propagated by using the scion wood and rootstocks
material only from the registered trees maintained in the nurseries for the purpose.
For producing certified nursery stock, the fruit nursery shall maintain a scion block
and stool bed and shall have to use the propagation material only from these sources.
For the production of certified nursery plants, certain minimum standards have been
fixed for different fruits and the nurserymen are required to adhere to these standards.
The general standards for different fruit plants are as under:
78
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
z Nursery plants should be healthy and free from diseases and insect-pests.
Besides this, the quality planting materials produced in all the nurseries can thus be
regulated under this act by:-
ii) Rigorous checking and identification of fruit kinds and varieties for trueness
and name/type through procedures as prescribed under certification
programme.
iii) Rigorous checking/indexing of nursery stock for freedom from viruses and
diseases.
iv) Rigorous inspection of nursery plants before sale to ensure the supply of
only healthy and disease-free plants to the growers.
Any person interested to establish fruit nursery in the particular area are advised
to meet the SMS/ Horticulture Development Officer of that area and shall make an
application in writing in prescribed form and manner accompanied by the revenue
papers of the land and license fee of rupees one hundred only. At present, the
license is valid for three years. After the validity period, the license can be renewed
on the application of owner with the renewal fee of rupees one hundred only,
provided the licensing authority is satisfied after inspection with the conditions
available.
79
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
the roads, paths, buildings, beds, irrigation channels, etc. It is prepared for effective
utilization of inputs and to do things in proper manner. A location specific model
should be designed for nursery establishment as per requirements. Certain important
components should be taken into consideration and provision should be made for
these during planning and layout of nurseries, which are as follows:
(i) Fencing
Prior to the establishment of a nursery, a good fence with barbed wire must be
erected around the nursery to prevent tress pass of animals and theft. The fence
could be further strengthened by planting a live hedge with thorny fruit plants.
80
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
layering because of availability of fresh scion material throughout the season within
the nursery itself and there will not be any lag period between separations of scion
and grafting/budding.
81
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Seedlings are taken out from the seed beds and transplanted in the nursery
beds. Nursery beds are required for establishing rootstock seedlings for grafting/
budding as well as for planting of cuttings and layered plants. Such beds can be
irrigated through sprinkler system.
There should be adequate provision for modern propagation structures like mist
chamber, poly houses, net houses etc. These structures provide optimum conditions
required for seed germination, rooting of cuttings and hardening of plants before
transplanting them in the field.
82
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Linkages
83
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
and smooth working of various units of the nursery. It can be provided through
Government sponsored schemes like National Horticultural Board, APEDA, National
Horticulture Technology Mission or institutions like Nationalized Banks or
Cooperatives.
Hi-tech interventions
Marketing management
84
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
plants; otherwise the quality of planting material would probably be erratic. There
are several key steps to initiate a quality control mechanism for the production of
planting material in fruit crops, which are given below:
The potential areas for the production of planting material of fruits should be
identified and always set realistic production targets on the basis of available
resources, particularly the genuine and certified scion /budwood and rootstock as
well as skilled manpower.
In order to meet the production target, develop flow chart of various nursery
practices along with time scale involved in the production of planting material. The
major considerations in this regard would be propagation method and its seasonal
variations for success and quality of the final produce, rootstock to be used, and
specifications for the scion / budwood including its genuineness and season of
availability.
85
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
Planting material produced should be labeled properly as per the records, with
necessary information such as crop, variety, rootstock used, date of production,
name of the nursery etc., and the planting material may be got certified from the
competent authority by constituting committee comprising of a horticulturist,
pathologist and entomologist as a part of the quality control mechanism.
86
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
in the nursery plant material in respect to selection of scion and rootstock used has
great influence on productivity of an orchard.
The progeny plants are the major source for spread of fungal and viral diseases.
Thus, it is worthwhile having all parent plants carefully lebeled or otherwise marked.
Identified mother trees are used to develop progeny trees in large numbers near to
the nursery site. They can be planted at closer distance. The trees are properly
labeled and used for scionwood. Adequate plant protection measures should also be
adopted to keep these progeny trees free from insect-pests and diseases.
z The plants should be healthy and free from diseases, pest infestations and
physiological disorders.
z The plants should have known pedigree records regarding bearing potential,
fruit quality and problems, if any.
87
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
the quality of nursery plants. Young nursery plants require intensive care to make
them grow well. There are various practices which should be paid special attention
as discussed hereunder :
i) Mulching
ii) Manuring
iii) Irrigation
Nursery stock and young plants require frequent irrigation to make them grow
well. Therefore, provision of assured irrigation is essential for the success of a fruit
nursery. In those areas where there is scarcity of irrigation water, it is essential to
construct a water storage tank near the nursery area to ensure proper irrigation of
plants. Plants should be watered at frequent intervals preferably in the evening, to
avoid evaporation of water from the nursery beds. Irrigation may be given by
constructing irrigation channel and sub-channels, plastic pipes, water cans and sprinkler
irrigation system. However, sprinkler irrigation system has been observed to be the
best for nursery plants.
Nursery area should be kept free of weeds. For this, nursery beds should be dug
5-10 cm deep at least 3-4 times with the help of hand forks for loosening the soil,
88
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
removing the weeds and satisfactory growth of plants. If manual labour is not available,
the pre-emergence weedicide (Simazine or Atrazine @ 6 kg/ha) is effective in
controlling weeds in seedling stocks and grafted plants. Grammaxone @ 2 L/ha as
post-emergence application along with pre-emergence application of weedicide
reduces the cost by about 60% as compared to hand weeding.
It is very important that the tying material does not girdle the rootstock, as this
will delay growth and lower the quality, therefore, the tying material from the
grafted plants should be removed timely. This is an important operation of budded/
grafted nursery plants, which must be done timely. After about one month of sprouting
when the grafted plants attain 30-45 cm height and the graft union start swelling,
polythene strips should be loosened by giving sharp cut on the back side of the graft.
vi) Deshooting
After grafting and budding, the shoots generally arise from the rootstock below
the graft union. It is necessary to remove such shoots from the rootstock at regular
intervals otherwise it may result in the failure of grafting/budding.
vii) Staking
It is necessary to regularly pinch the side shoots coming from the growing
scions. Single stemming to a height of at least 45 cm should be done by allowing one
sprout to grow properly and rapidly.
The saplings of evergreen fruit plants such as mango, litchi, citrus, guava,
papaya and aonla are uprooted from the nursery during rainy season (July-August)
whereas, peach, apple, pear, plum, apricot and pomegranate during winter
89
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
(December-January) when they have entered into dormancy, after all shoot growth
has stopped and most leaves have abscised. While uprooting, the nursery plants,
care should be taken not to cause damage to the root system. Plants should be
uprooted only after rains or after giving irrigation to the nursery beds. Before
uprooting the plants, deep furrows should be made on both sides of plant rows.
Plants should be uprooted manually without damaging the bud union and root system.
After uprooting, the root system should be dipped in a solution of metasystox (1
ml/l water) for 30 seconds before packing. Plants should be properly labeled and
packed cultivar-wise in bundles of desirable and convenient size. The roots should
be covered with sphagnum moss grass and wrapped securely in gunny bags.
Plant Protection
A. Insect-pests Management
Scales Single spray of rogor or metasystox (0.05 per cent) is quite effective.
Repeat it after 15 days interval. Crude oil spray is also useful for
controlling the scales.
Thrips Two sprays either of metasystox or rogor (0.05 per cent) at fortnightly
interval on new growth reduces the population of thrips considerably.
White flies Spray phosphamidon (0.02 per cent) or other systematic insecticide
in the early stages of infestation.
Mites Give two sprays of acaricides like dicofol (0.05 per cent) and wettable
sulphur (0.2 per cent) at fortnightly intervals.
90
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
A. Insect-pests Management
Leaf eating Spray sevin/carbaryl (0.1 per cent) at the first appearance of the
caterpillars caterpillars. Neem oil (1 per cent) is also effective.
Leaf miners Two sprays of metasystox or rogor (0.05 per cent) at fortnightly
interval on newly emerged growth flushes are sufficient for controlling
the population of leaf miners in the nursery.
Snails and slugs 1. Hand picking and destruction is most effective method.
B. Diseases Management
Damping off 1. Treat seeds before sowing with ceresan, thiram or agrosan @ 2
g per kg seeds.
Leaf spots Give a single spray of dithane Z-78 or bavistin (0.2 per cent)
Blights A single spray of dithane Z-78 or bavistin (0.2 per cent) is very
effective to check blight disease in the nursery plants.
91
Downloaded from http://www.cbseportal.com
Downloaded from http://www.cbseportal.com
ACTIVITIES/EXERCISES
1. Describe briefly the present status of planting material and fruit plant
nurseries in India.
2. Write the components of a nursery. Describe each component briefly.
3. Write important nursery management practices to be adopted for quality
production of plant material.
4. What is mother plant? Write briefly about criteria to be kept in mind while
selecting mother plant.