Professional Documents
Culture Documents
Experiment P4: Elastic Limit The Spring Will Still Return To Its Original Length Once The Force Is Removed
Experiment P4: Elastic Limit The Spring Will Still Return To Its Original Length Once The Force Is Removed
INVESTIGATION OF ELASTICITY
Objectives
1. To investigate the elasticity of various materials by examining to what extent they
obey Hooke's Law.
2. To investigate periodic motion for a spring.
Background
Elasticity is a physical property of material objects that determines how easily an object may
be deformed by stretching, bending, or compressing and still return to its original shape. It is
said to be more elastic if it restores itself more precisely to its original configuration. A rubber
band is easy to stretch, and snaps back to near its original length when released, but it is not as
elastic as a piece of piano wire. The piano wire is harder to stretch, but would be said to be
more elastic than the rubber band because of the precision of its return to its original length. A
real piano string can be struck hundreds of time without stretching enough to go noticeably out
of tune.
A spring is an example of an elastic object - when stretched, it exerts a restoring force which
tends to bring it back to its original length. Automobile suspensions, playground toys and
even retractable ball-point pens employ springs. Most springs have an easily predicted
behaviour when a force is applied i.e. as the spring is extended or compressed. Hooke's Law,
as commonly used, states that the force F a spring exerts on a body is directly proportional to
the displacement ∆l of the system (extension of the spring).
F = -k∆l
where k is the spring constant and the magnitude depends on the spring, being large for stiff
springs and small for easily stretched springs. For wires or columns, the elasticity is generally
described in terms of the amount of deformation (strain) resulting from a given stress (Young's
modulus).
Hooke's Law applies as long as the material stress (applied force) does not pass a certain
point known as its proportional limit. Beyond this point there is no longer a linear
relationship between the applied force and the spring extension, but up a point called the
elastic limit the spring will still return to its original length once the force is removed.
However, if the spring is stretched beyond its elastic limit, it does not return to its original
length upon removal of the applied force but remains permanently deformed (like bending a
paper clip).
- 30 -
Experiment 1: Hooke’s Law
Materials for which the deformation is proportional to the applied force are said to obey
Hooke's Law. It is the objective of this present experiment to examine a range of materials
generally classified as elastic and to investigate to what extent they obey Hooke's Law.
Apparatus
Rubber cord Metre stick mass hanger
Steel spring Retort stand 10 g and 100 g masses
Procedure
1. Fix one end of the rubber cord to the retort stand and the other to a mass hanger.
2. Measure the relaxed length l of rubber cord with no mass attached.
3. Determine a suitable range of masses over which to measure the extension of the rubber
cord.
4. Successively apply the masses (M) onto the rubber cord and record the length l and the
extension (∆l) in each case to get at least 8-10 readings.
5. Take care not to overload the cord otherwise permanent deformation can result.
6. Plot a graph of extension (in mm) versus mass (in kg) for the rubber cord. Indicate on
the graph the region (if any) where Hooke's Law is satisfied. For this region, measure
the slope (S) in mm kg-1.
7. Connect the steel spring to the retort stand and repeat steps 1-6 for the steel spring.
Note: Graphs should be plotted in accordance with the guidelines given in Appendix 1.
Analysis
- 31 -
Therefore the slope of the graph ∆l vs M (as plotted in Experiment 1) enables the ratio g/k to
be determined.
If an elastic object is stressed and released it will oscillate periodically about its equilibrium or
rest position. Examples of such objects are a musical string instrument, a saw blade clamped at
one end or a mass attached to a spring.
It is the purpose of this experiment to investigate how the periodic time of an oscillating
spring may be used to deduce a value for g, the acceleration due to gravity.
Apparatus
Steel spring Stopclock mass hanger
Metre stick Retort stand 100 g and 10 g masses
Procedure
1. Set up the steel spring on the retort stand and attach a 100 g mass. Measure the time
for 30 oscillations and take the average value to get the periodic time T. Include the
mass of the hanger in your value of M.
2. Gradually increase the mass M, measuring T in each case. Record 8-10 readings taking
care not to over-stretch the spring.
3. Plot a graph of T2 (in s2) vs M (kg) on graph paper.
4. From the slope of the T2 vs M graph, determine g the acceleration due to gravity using
Equation 4. (S is already known from Experiment 1).
5. From the intercept determine the effective mass m of the spring. Pay particular
attention to units here.
6.
Analysis
The motion of a body that oscillates back and forth is defined as Simple Harmonic Motion if
there exists a restoring force F that is opposite and directly proportional to the distance x that the
body is displaced from its equilibrium position. If Hooke’s Law holds for a spring, then the
motion of masses vibrating up and down on the spring should be simple harmonic motion. If
the mass, when hanging from the spring, is given a small additional displacement x from its
equilibrium position and then released, the spring will exert a net force F = -kx which tends to
restore the mass to its equilibrium position. The constant of proportionality k is called the
spring constant and can be found by subjecting the spring to an applied force and measuring the
amount that the spring stretches.
It is clear that at all positions of the mass's motion, the net force on the mass M is directed
towards the equilibrium position. As a result the mass M undergoes repetitive vertical
oscillations about the equilibrium position. The periodic time for these vibrations may be
determined in the following way.
- 32 -
F = M d2 x/d t2 (Newton’s 2nd Law) and F = -kx
∴ M d2 x/d t2 = -kx
or M d2 x/d t2 + kx = 0 (1)
We see that the motion repeats itself with a periodic time, with the time for one oscillation
called the period T, given by:
2π M
T= = 2π (2)
ω k
The frequency f of the oscillations is the number of oscillations per unit time and is the
reciprocal of the period, f=1/T, and is given by:
1 k
f=
2π M
We have shown already that the slope S of the ∆l vs M graph is equal to g/k in Experiment 1.
MS
Thus, k = g/S and T = 2π
g
We have ignored the mass of the spring itself in the above analysis. This may be taken into
account by writing:
(M + m)S
T = 2π (3)
g
where m is the "effective mass" of the spring.
- 33 -
2 4π 2 S 2
4π Sm
T = M + (4)
g g
This equation is in the form y = mx + c. Therefore, if the periodic time T is measured for
various masses M, a graph of T2 vs M should give a straight line
the slope of which is 4π2 S/g (knowing S enables g to be determined)
the intercept of which is 4π2mS/g (knowing S and g enables m to be determined.)
Reference
Giancoli, Physics, Fifth Edition, Chapter 9.
Young and Freedman, University Physics, Ed. 9, Chapters 6 and 13.
- 34 -