Professional Documents
Culture Documents
The SPDF Electron Orbital Model Parsed
The SPDF Electron Orbital Model Parsed
Abstract
The currently accepted, QM, spdf electron model is a collection of individual orbital sets
designed to handle 1, 3, 5 and 7 groupings. For anyone who takes enough chemistry, these
mathematically generated images are some of the most memorable – as separate presentations,
that is. When combined in 3D space to contain 32 electrons, they are a mess as the sets are not
orthogonal to one another; nor are they dynamic. The spdf orbital sets, their shapes, orientations,
and spatial overlapping are addressed.
INTRODUCTION
The spdf orbital model of the electrons of the elements of the periodic table is now over a
century old. As such, it is deeply entrenched in scientific studies. The individual
components (s, p, d and f) are presented in graphic form for all to grasp. They form some
of the most recognizable images of the scientific arena. Individually, that is. Images of
them combined in 3D beyond the s+p level are seldom set forth. This paper has been
prepared to address that issue and to illustrate how these individual components
collectively handle 32 electrons.
The two f-orbital sets use the three (3) orbital shapes shown in
the figure at the right. Three are common to both sets4. The
“cores” differ primarily in the number of “tori-orbitals” as
shown in the figure on the left.
The core of the general set gives
the illusion of a “gyroscope”5.
Why isn’t a similar set presented
for the d-orbitals? The four
common spdf orbital sets are
presented as artistic
representations in the following
chart in typical, but inverted,
“pyramidal” fashion along with
d and f tri-torus sets.
1
This layout of the spdf orbitals emphasizes what the orbitals are intended to do: model
space for 1, 3, 5, and 7 pairs of electrons. What should be clear is that each set ignores the
fact that it starts by occupying the space dedicated to the preceding one. This is seen in
the center column of the above
figure and emphasized in the
figure at the right. Roughly,
the electron density of ~6
electrons, out of 32, is
concentrated along this axis.
With similar overlaps along
the x and y axes, ~60% of the
total electron density of a period is concentrated in ~20% of the spherical volume! This
may be nice for mathematics, but it is unlikely to occur in a real world situation.
While they can handle the 1, 3, 5, and 7 pairs separately, they do not present proper
orbitals when the sums of the electrons are 2, 8, 18, and 32 as needed to address the
periods of the periodic table of elements. The following figure illustrates how the spdf
electron orbitals mesh to provide the number of electrons for a period in the periodic
table. The spdf orbital model starts with a “mild” overlap as the s and p-orbitals combine
to accommodate 8 electrons. The overlap is not so mild when the d-orbitals are added to
the s/p group to handle 18 electrons. [The portions where the d-orbitals coexist with the
px and py orbitals are tipped with blue; a bit of yellow can be seen where the p-orbitals are
present. The pz orbital coexists with the purple dx2 orbital.] The overlap situation becomes
extreme when the f-orbitals are added to the s/p/d sum. [The general f-orbital set is used
in the figure.] Of note is the change in the number of lobes required to accommodate a
2
pair of electrons: 1 for 2, 7 for 8, 25 for 18, and ~64 for 32 along with a few tori. Strange!
Of course, it is, but they have been mathematically generated according to the precepts of
the QM nlms numbers and fitting 5 or 7-component sets into 3D space.
Conclusion: the spdf orbital models look neat and crisp when viewed as independent sets
of orbitals, but become a garbled mess when combined beyond the simplest grouping of
8. This garbled mess becomes even worse as more periods are considered. The spdf
model is simply a rigid orbital, “file cabinet” model, starting with a single drawer and
stacking more on top. The spdf model is rather myopic when broad application is
considered. Dogged adherence to its rigidity indicates either that little has been learned in
the past century about the actual structure or that no one dares to disturb the sacred icon.
3
Nesting of the orbital types is clearly evident with
each electron having a “dedicated” home abode.
Sub-orbital units can be established to associate
electrons into groups as required (that is
demonstrated for the 2 electron case), but an overall
symmetrical distribution of electron density (as
defined by the lobes) must be maintained. The
complete nesting symmetry of all of the MCAS
orbital types is shown in the figure at the right.
So, what is so important about “nesting”? Consider that the currently known elements
require seven (7) periods (levels) of electrons. The last element in the 7th period will
contain 118 electrons in periods of 2, 8, 18, 32, 32, 18, and 8 electrons. These periods are
not onion-skin layers independent of the layer above and below. “Nesting” provides the
mechanism that allows electron orbitals to be placed in each period in a manner that
provides the lowest energy for the total arrangement. “Nesting” of the orbitals is clearly
seen in the orbital structure of the noble gases when modeling has been performed with
MCAS orbitals (see figure below; its generation is presented elsewhere6 - click here to
connect). Note that only two levels of A or S sets ever need coordinating!
4
Electrons in similar orbital types of different “periodic levels” are coordinated as orbital
dimensions range from the nucleus outward to the farthemost extent of the orbital type.
Dynamic coordination is an inherent feature of the MCAS model.
SUMMARY
The spdf model is a stoic mathematical model that is based on creating independent sets
of orbitals containing 1, 3, 5 and 7 pairs of electrons. The resulting sets have memorable
3D images of their individual components. Individually, each set is aligned along the x, y,
and z axes. When combined to handle 2, 8, 18, and 32 electrons in 1, 4, 9, 16 pairs, these
sets are not orthogonal to one another and overlap from the very start. The noble elements
require well-coordinated groups of 2, 8, 18, and 32 electrons. When the spdf orbitals are
subjected to a 3D, visual summing, they present anything but a neat assemblage of the
electron spaces needed to handle the required number of “periodic” electrons. It is not a
matter of how the spdf orbital sets have been generated (the mathematical logic of the
individual sets can clearly be followed and taught), but whether the summation logic
follows the same constraints that are applied to the individual sets. When the orbital sets
are combined, it is clear that the same constraints are not followed.
In contrast to the spdf electron orbital model, the MCAS electron orbital model provides
simple, nesting, configurations to handle the electrons needed for the periods of the
periodic table of elements.
“Comparing the Logic behind the spdf and MCAS Models” also addresses the spd portion
of the spdf model7 - click here to connect.
5
ADDENDUM
The figure at the right is given to aid in understanding the MC
“mirrored” orbital concept.
For adherents of the wave approach to electrons, think of the edges of the lobes of the
tetrahedral orbital as defining the wave length. The number of electrons in the tetrahedral
orbital can be thought of as the wave’s intensity. This imagery is presented in the figure
below. The size of the tetrahedral lobes determines how many electrons can be
accommodated. The first tetrahedral unit is only large enough to handle a single electron.
The wave intensity of a single tetrahedral orbital unit beyond that first level can scale to 4
(1 per lobe); the sum of the two mirrored tetrahedral orbitals can reach 8.
6
Bonding using the orbitals of the MCAS model has been presented
elsewhere where electrostatic attracting and repelling of the
electrons and nuclei are included8. The nitrogen molecule is shown
at the right.
In keeping with the wave imagery above, the figure at the right
shows the combination of tetrahedral waves from two separate
atoms. Lower energy results from the longer (~doubled!) combined
wave length. At the lowest orbital level, this would be one of the
possibilities for H2 (2 electrons). For the next level and a larger
tetrahedral unit, the combined wave can accommodate up to 6
electrons (F2). A 7th electron will not be accommodated as the
combined wave would be more energetic than the two individual
ones. Also, a “permanent” electron presence would occur between
the nuclei. Think about Ne and F not forming a bond.
For those preferring a particulate model, the combined “wave lines” indicate coordinated
passage of electrons around each nucleus and then onto the other giving greater mean
coverage to the nuclei. There are electrostatic interactions of these orbitals with the other
tetrahedral orbitals that are not shown here.
For those preferring a probability model, the overlapped orbitals are simply a way of
reducing the total orbital volume to be filled with the totality of electron density; 8
orbitals reduced to 7. A high concentration of electron negativity should NOT be
expected in the overlap, however, as the other lobes have requirements, too. For N2, 2
electrons would be distributed among the 7 and, as a first approximation, the overlapped
region would have 0.29 electron; not 2. For F2, it would have 0.86 electron.
REFERENCES
1
Atomic orbitals: 5f (cubic set), University of Sheffield - http://winter.group.shef.ac.uk/orbitron/AOs/5f/
2
a) Electronic Orbitals, UCDavis -
http://chemwiki.ucdavis.edu/Physical_Chemistry/Quantum_Mechanics/Atomic_Theory/Electrons_in
_Atoms/Electronic_Orbitals;
b) Electron Orbitals, http://www.angelfire.com/falcon2/dirgni/orbitals.html;
c) 4f Orbitals (General Setting) Department of Chemistry - University of Oxford -
http://www.chem.ox.ac.uk/icl/heyes/LanthAct/I3.html;
d) f orbitals, WikiMedia Commons - https://commons.wikimedia.org/wiki/File:F_orbitals.png;
e) seven f orbital are less well understood, Los Alamos National Labotratory -
http://www.lanl.gov/orgs/nmt/nmtdo/AQarchive/04spring/VO.html
3
a) Atomic Orbitals f orbitals, Delta School District British Columbia, Canada -
https://fc.deltasd.bc.ca/~mannandale/oldchemsite/Chemistry11/Atomictheory/forbitals.htm;
b) f-orbital models on stands, University of Michigan SharePoint Portal -
https://sharepoint.umich.edu/lsa/physics/demolab/DemoLab%20Asset%20Library/F%20Orbital%20
Models_7B50.10.bmp
4
fxyz, fz3, and fz(x2-y2), Atomic orbitals: 5f (cubic set), University of Sheffield -
http://winter.group.shef.ac.uk/orbitron/AOs/5f/
5
Gyroscope, from collection at the National Museum of American History at the Smithsonian Institution,
Department of Physics, Kenyon College -
http://physics.kenyon.edu/EarlyApparatus/Mechanics/Bohnenbergers_Apparatus/Bohnenbergers_App
aratus.html
6
Creating the Familiar Periodic Table via MCAS Electron Orbital Filling,, Joel M Williams -
http://pages.swcp.com/~jmw-
mcw/The%20Familiar%20Periodic%20Table%20of%20Elements%20and%20Electron%20Orbital%
20Filling.htm
7
Is the Logic Behind the Spdf Orbital Model Really Rational?, Joel M Williams -
http://vixra.org/abs/1308.0012
8
a) Understanding the Bonding of Diatomic Molecules, Joel M Williams - http://vixra.org/abs/1305.0077:
b) Electron Orbital Models and the Hydrogen Molecule, Joel M Williams -
http://vixra.org/abs/1305.0165;
c) Electronic Bonding of Atoms, Joel Mann Williams - http://gsjournal.net/Science-
Journals/Essays/View/4043;
d) Modeling the MCAS Way, Joel M Williams - http://arxiv.org/html/physics/9902046v2 (sharper
imagery at http://pages.swcp.com/~jmw-mcw/science)