This document provides a summary of the components and specifications for a 10kWp on-grid solar system. It includes 33 polycrystalline 300Wp solar modules, a roof top mounting structure, an array junction box, a 10kW grid inverter, module to DCDB and inverter to ACDB cabling, ACDB and DCDB units, lightning arresters, grounding materials including a chemical earthing pit, and notes the total cost of 617,500 rupees for supply and 32,500 rupees for installation.
This document provides a summary of the components and specifications for a 10kWp on-grid solar system. It includes 33 polycrystalline 300Wp solar modules, a roof top mounting structure, an array junction box, a 10kW grid inverter, module to DCDB and inverter to ACDB cabling, ACDB and DCDB units, lightning arresters, grounding materials including a chemical earthing pit, and notes the total cost of 617,500 rupees for supply and 32,500 rupees for installation.
This document provides a summary of the components and specifications for a 10kWp on-grid solar system. It includes 33 polycrystalline 300Wp solar modules, a roof top mounting structure, an array junction box, a 10kW grid inverter, module to DCDB and inverter to ACDB cabling, ACDB and DCDB units, lightning arresters, grounding materials including a chemical earthing pit, and notes the total cost of 617,500 rupees for supply and 32,500 rupees for installation.
This document provides a summary of the components and specifications for a 10kWp on-grid solar system. It includes 33 polycrystalline 300Wp solar modules, a roof top mounting structure, an array junction box, a 10kW grid inverter, module to DCDB and inverter to ACDB cabling, ACDB and DCDB units, lightning arresters, grounding materials including a chemical earthing pit, and notes the total cost of 617,500 rupees for supply and 32,500 rupees for installation.
MANUFACTURURE AND SUPPLIER AND SOLAR MODULE & SOLUTION PROVIDER
REF: EPC/10KWp/Q369/2K17 DATE 24.5.2017
10 KWp Ongrid Solar System Description / S.NO. Description QTY Unit Make REMARKS Specification SITC of following Module
Poly Crystalline 300Wp Modules, as per IEC 61215/IS14286,IEC-61730 Part-
1st for construction and Part-2nd for testing/saftyIEC-61701/IS 61701,ISO 9001/ISO 14001,With inbild bypass diod,Frame should be Al anodize,power 1 Solar Modules 33 Sets Enkay Solar tolerance of +/-3%,Vmp and Imp shall not vary more than 2%, With junction box arrangement havin inbuild bypass diod,weather proof,IP-65,with RFID tag.Material warranty upto 5year and performance warranty 25 year. Balance of the system MODULE Roof top mount fixed type structure with all required material for execution, 2 MOUNTING except raise of height. STRUCTURE (Make-Reputed) 1 Sets Local Array Junction Box suitable for outdoor (IP-65), Structure mounted type construction with following items: A) Four numbers 16 Amp, 1000Volt DC, positive side Pull out fuse as incomers suitable for 4 Sq. mm. Cu. Flexible solar cable connection (Make :- Little Fuse / Bussman/ Reputed) B) Four numbers 16 Amp, 1000Volt DC, Negative side Pull out fuse as ARRAY JUNCTION incomers suitable for 4 Sq. mm. Cu. Flexible solar cable (Make :- Little Fuse / 3 1 Sets Hensel/Onexis BOX Bussman/ Reputed) C) 8 Nos. PVC Gland for positive side fuse connection through 4Sq. mm. Solar Cable. (Make :- Comet / Power Connect) D) 8 Nos. PVC Gland for Negative side fuse connection through 4Sq. mm. Solar Cable. (Make :- Comet / Power Connect) E) One pair (positive and negative both) 50A, Cu Bus Bar F) Enclosure with structure/wall mounting arrangement Suitable for outdoor Application along with suitable heat dissipation facility. (Make :- Reputed) House MPPT,DG set interactive,output should compatible with grid frequency.IGBT/MOSFET,Microprodessor,DSP,430V,3-Phase,50Hz +/- 3%,Ambient tem -20 dec to +50Deg,Humidity 95%, Protection IP-20 for indoor and IP-65 outdoor,grid voltage tolerance -20% to +15%, No load losses lees then 1% of rated power,efficiency 93% or above, THD less then Grid Inverter -10 4 3%,P.F more then 0.9,fully automatic,havin internal protections against any 1 Sets Delta /zever /sukam KW fault in feedr,Built-in meter and data logger to monitor plant, inverter desing as per IEC/BIS standard for efficiency and enviornmental tests as per IEC 61683/IS 61683 and IEC 60068-2 (1,2,14,30).MPPT as per IEC 60068- 2(1,2,14,30)/BIS.Junction box should be IP-65 for outdoor and IP 55 for indoor as per IEC 529.Inverter should be grid as well as DG integrated.
Cable Wiring Set
5 1cX4 sq. mm 200 Mtrs APAR Radient/Polycab/Havells Module to DCDB 6 1cX 6 sq mm coper wire 100 Mtrs APAR Radient/Polycab/Havells Inverter to ACDB 7 Cables and wires 1c X 4 sq. mm (Green colour) 100 Mtrs APAR Radient/Polycab/Havells Earthing 8 ACDB&DCDB ACDB &DCDB(40 A 4P MCB in WP Enclosure) 1 Sets Hensel/Onexis 9 Safety Lightning arrester 1 M long 1 Sets Reputed 10 EARTHING G.I. 30 Mtrs Reputed Chemical Earthing pit of 3 meter long GI pipe/rod with backfill compound Chemical 11 and cover 3 Sets Local LA-1,Body-1,AC-1 EARTHING (Make - GPS/Reputed) Government Rate @ 75000 / kwp subsidy @ 30% /kwp Supply Part 617500 Installation Part 32500 Flight Extra Service Tax Extra Total Amount 650000