Am Molub Alloy 8031 Tds

Product Data
Castrol Molub-Alloy 8031

®
Multi-Service Lubricants
Castrol Molub-Alloy 8031 Multi-Service Lubricants are NLGI 00 high

viscosity base oil gel (greases) designed to lubricate heavily loaded open gears,
screw type actuators, and low to moderate velocity bushings and plain and
rolling element bearings equipped with centralized or sump type lubrications
systems.
Castrol Molub-Alloy 8031Multi-Service Lubricants are part of Castrol

Performance Lubricants’ Eco-Solutions™ product offering. Formulated to
address environmental concerns, Castrol Molub-Alloy 8031 Multi-Service
Lubricants are free of lead, chlorinated solvents, and barium. They contain no
solvents or diluents, and meets the TCLP (Toxicity Characteristic Leaching
Procedure).
This product is formulated to be readily pumpable and slumpable for good

lubricant distribution in enclosed and semi-enclosed applications, and drainable
for ease of removal from surrounding guards. This product is also specifically
formulated to flush contaminants from gear and pinion flanks, and to resist
accumulation in the roots of gear teeth.
Because of their high thixotropic properties, Castrol Molub-Alloy 8031 Multi-

Service Lubricants may be utilized in Performance Lubricants’ patented batch
recirculating lubricant application systems. This allows for the economical
controlled application of lubricant on a new continuous basis using existing
intermittent spray hardware.
Description
Castrol Molub-Alloy 8031 Multi-Service Lubricants are gel-like greases
formulated with a non-soap, inorganic thickening system. They contain a high
viscosity base fluid especially designed to provide extreme pressure (EP) and
antiwear characteristics to the lubricant.
Castrol Molub-Alloy 8031 Multi-Service Lubricants contains proprietary

blends of Molub-Alloy lubricating solids in combination with chemical EP
additives. These react synergistically under boundary lubrication conditions to
provide outstanding protection to metal surfaces.
Usage
Castrol Molub-Alloy 8031 Multi-Service Lubricants are recommended for
use in applications requiring anti-scuff and antiwear protection, and where no
Castrol Industrial Americas

150 W. Warrenville Road
Naperville, IL 60563
Castrol Molub-Alloy 8031 – 12-Apr-04 Tel (877) 641 1600
Page 1 of 3
Fax (877) 648 9801
Product Data
product buildup is desired. It is also suited for units containing bushings,
bearings and/or gears where ISO 1500, 3000 or 6000 viscosity grade lubricant
is required, but straight fluid lubricants leak out.
Castrol Molub-Alloy 8031 Multi-Service Lubricants icants are formulated to

minimize the potential for eventual plugging of the lubricant distribution lines
commonly associated with conventional greases.
Notes
Castrol Molub-Alloy 8031 Multi-Service Lubricants has been tested for
compatibility with various types of greases and compounds. These tests
indicate that Molub-Alloy 8031 is compatible with most common greases and
multi-purpose compounds. However, if Castrol Molub-Alloy 8031 Multi-
Service Lubricants is to be mixed with another product, monitor the
application for possible incompatibility after the changeover.
For specific terms, conditions, warranty, and availability, refer to Castrol

Performance Lubricants’ Price List in effect at time of purchase.

Page 2 of 3
Fax (877) 648 9801
Product Data
Typical Characteristics
8031/1500 8031/3000 8031/6000
NLGI Grade 00 00 00
Thickener Non-Soap, Inorganic Non-Soap, Inorganic Non-Soap, Inorganic
Film Appearance Non-Soap, Inorganic Dark and Opaque Dark and Opaque
Unworked Penetration, ASTM D217 400-430 400-430 400-430
Base Fluid Properties:
ISO Viscosity Grade, ASTM 1500 3000 6000
D2422
Specific Gravity, ASTM 0.928-0.938 0.9408 0.937-0.947
D1298 @ 15.6°C/60°F
Viscosity:
@ 40°C, mm2/s (cSt) 1630 3000 5943
2
@ 100°C, mm /s (cSt) 57.4 96 145
Flash Point, ASTM D92, COC, °C/°F 225/437 218/425 232/450
Brookfield Viscosity, Pa s (cp) Spindle 46,000 80,000 48,000
No. 7, 10 rpm @ 77°F/25°C
Copper Corrosion, ASTM D4048, 1b 1b 1b
Four Ball Extreme Pressure Test,
ASTM D2596:
Load Wear Index, kg 51 88 70
Weld Load, kg 620 400 800
FZG Test, in accordance with DIN 51
354
A/2.76/50 method, failure >12 >12 >12
stage
US Steel Timken Retention Test, Pass Pass Pass
15kg/33 LB @ 30 minutes
Lincoln Ventmeter, PSI
@ -1.1°C/30°F, psi 140 210 200
@ -6.7°C/20°F, psi 300 440 380
@ -12.2°C/10°F, psi 830 840 790
TCLP (Unused) Pass Pass Pass
Castrol Molub-Alloy Solids, Grade Mulit-Service Multi-Service Multi-Service
Classification
Subject to usual manufacturing tolerances
All reasonable care has been taken to ensure that this information is accurate as of the date of printing.
Nevertheless, such information may be affected by changes in the blend formulation occurring subsequent to
the date of printing. Material Safety Data Sheets are available for all Castrol products. The MSDS must be
consulted for appropriate information regarding storage, safe handling and disposal of a product.

Page 3 of 3
Fax (877) 648 9801

Am Molub Alloy 8031 Tds

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Am Molub Alloy 8031 Tds

Uploaded by

Copyright:

Available Formats

Product Data

Castrol Molub-Alloy 8031

Castrol Molub-Alloy 8031 Multi-Service Lubricants are NLGI 00 high

Castrol Molub-Alloy 8031Multi-Service Lubricants are part of Castrol

This product is formulated to be readily pumpable and slumpable for good

Because of their high thixotropic properties, Castrol Molub-Alloy 8031 Multi-

Castrol Molub-Alloy 8031 Multi-Service Lubricants contains proprietary

Castrol Industrial Americas

Castrol Molub-Alloy 8031 Multi-Service Lubricants icants are formulated to

For specific terms, conditions, warranty, and availability, refer to Castrol

Castrol Industrial Americas

Subject to usual manufacturing tolerances

Castrol Industrial Americas

You might also like