Bulldozer Komatsu D65EP-12 - 0
Bulldozer Komatsu D65EP-12 - 0
CRAWLER DOZER
● Back-up alarm diagnostics ● Pullhook, front
● Batteries, large capacity 92 Ah ● Foot rest, high mounted
● Starting motor, 5.5 kW ● Horn
Power train and controls ● Seat belt, 76 mm 3" retractable
● Brake pedal ● Seat, low back vinyl, suspension type
● Counter rotation Dozer assembly
● Electronically controlled Hydrostatic ● Variable pitch and power angle tilt dozer *ROPS cab or ROPS canopy must be ordered for
Transmission (HST) with Quick-shift and assembly, inside arms (EX: 2710 mm all machines. Cab and canopy FOPS Level 2.
ROPS/FOPS meets all OSHA/MSHA standards
variable speed settings 8'11" blade, PX: 3250 mm 10'8" blade)
and regulations criteria.
● Palm Command Control System (PCCS)
with electronic control for travel control Dozer assembly and rear-mounted equipment are
● Reverse speed presets not included in base machine price.
OPTIONAL EQUIPMENT
Track shoe assembly with sealed and Dozer assembly Rear equipment and hydraulics
lubricated link assembly ● D39PX-22 – 2980 mm 9'9" blade ● Rear, hydraulics (D39EX/PX-22)
● D39PX-22 Track roller guards ● Ripper, multi-shank (D39EX-22 only)
– 700 mm 27.6" single grouser, link ● Track roller guards, segmented, full ● Hitch
Track rail assembly with Abrasion length ROPS canopy and ROPS cab equipment
Resistant (AR) bushings and sealed and Operator environment ● ROPS cab (includes air conditioner with
lubricated link assembly ● 12 amp (12V) power port (cab only) heater, defroster, pressurizer)
● D39EX-22 ● Cab machine – Optional radio, AM/FM, cassette
– 460 mm 18.1" single grouser, – Cigarette lighter (24 V, standard for cab) ● ROPS canopy with lower heater
shoe with AR link – Lunch box holder (standard for cab) Operator environment
– 510 mm 20" single grouser, – Provision for radio (cab only) ● Forestry guards for cab and canopy
with AR link – Seat, suspension type, fabric, high back
● D39PX-22 – Seat, suspension type, fabric low back
– 635 mm 25.0" single grouser, – Seat, air suspension type, fabric high
with AR link back
– 700 mm 27.6" single grouser, ● Lunch box holder (option for canopy)
with AR link
OPERATING WEIGHT
D39EX-22: 9040 kg 19,930 lb
All-around visibility Improved durability D39PX-22: 9480 kg 20,900 lb
● Super-slant nose design ● Heavy-plate steel used throughout
● Cab-forward design ● Modular design
● Integrated ROPS/FOPS
Easy maintenance
Increased productivity ● Electronic monitor panel with on-board diagnostics
● Highest HP in its class ● Rear-mount radiator with swing-up hydraulically-
● Electronically-controlled hydraulically-driven fan driven fan
● In-shoe final drive ● Ground-level daily service checks
● High capacity Pitch- Adjustable Power-Angle-Tilt
dozer blade
2 3
D39-22 C R AW L E R D O Z E R CRAWLER DOZER
D39-22
4 5
D39-22 C R AW L E R D O Z E R CRAWLER DOZER
D39-22
Boot
One-piece nose guard
Rubber
R Simplified high-rigidity structure with thicker plates reduces
RH vibration and noise.
Down Shift
6 7
D39-22 C R AW L E R D O Z E R CRAWLER DOZER
D39-22
Photo may include optional equipment. Photo may include optional equipment.
8 9
D39-22 C R AW L E R D O Z E R CRAWLER DOZER
D39-22
SPECIFICATIONS
ENGINE STEERING SYSTEM DIMENSIONS
Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA4D107E-1* Palm Command Control System (PCCS) joystick control for all
Type. . . . . . . . . . . . . . . . . . . . . 4-cycle, water-cooled, direct injection directional movements. Pushing the joystick forward results in
Aspiration . . . . . . . . . . . . . . . . . . Turbocharged, air-to-air aftercooled forward machine travel, while pulling it rearward reverses the
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 machine. Simply tilt the joystick to the left or right to make a turn. D39EX-22 D39PX-22
Bore x stroke . . . . . . . . . . . . . . . . 107 mm x 124 mm 4.21" x 4.88" Tilting the joystick fully to the left or right activates counter-rotation. A* 1280 mm 4'2" 1280 mm 4'2"
Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . . 4.46 ltr 272 in3 Hydrostatic Transmission (HST) eliminates steering clutches and
B 2710 mm 8'11" 3250 mm 10'8"
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed, electronic brakes, providing smooth powerful turns. Fully electronic control O
Horsepower enables smooth control. The PCCS utilizes shift buttons to increase B* — 2980 mm 9'9" L N
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . Gross 79.9 kW 107 HP and decrease speed. C 370 mm 1'3" 445 mm 1'5"
ISO 9249 / SAE J1349 . . . . . . . . . . . . . . . . . . Net 79 kW 105 HP Minimum turning radius: C — 405 mm 1'4" M
Hydraulic fan at maximum speed . . . . . . . . . . . Net 71 kW 95 HP D39EX-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 m 7'3" D 2730 mm 8'11" 2730 mm 8'11"
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2200 rpm D39PX-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 m 7'10" E 900 mm 2'11" 900 mm 2'11" A
Fan drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic 25
I
F 450 mm 1'6" 450 mm 1'6" 25
Lubrication system As measured by track marks on the ground at pivot turn.
Method . . . . . . . . . . . . . . . . . . . . . . . Gear pump, force lubrication G 2360 mm 7'9" 2360 mm 7'9"
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow H 4335 mm 14'3" 4335 mm 14'3"
*EPA Tier 3 emissions certified UNDERCARRIAGE I 2245 mm 7'4" 2245 mm 7'4"
D J
Suspension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rigid type J 2835 mm 9'4" 2835 mm 9'4"
Track roller frame . . . . . . . . . . . . . . . . . . . Monocoque, large section, K 53 mm 2.1" 53 mm 2.1"
durable construction L 1650 mm 5'5" 1790 mm 5'10"
HYDROSTATIC TRANSMISSION Rollers and idlers. . . . . . . . . . . . . . . . . . . . . . Lubricated track rollers C E
M 460 mm 18.1" 635 mm 25.0" GL
Dual-path, hydrostatic transmission provides infinite speed changes Lubricated tracks N 2110 mm 6'11" 2425 mm 7'11" F G K
up to 8.5 km/h 5.3 mph. The variable capacity travel motors allow Unique seals prevent entry of foreign abrasive material into pin to B H
O 2490 mm 8'2" 2980 mm 9'9"
the operator to select the optimum speed to match specific jobs. bushing clearances to provide extended service life. Track tension
Travel control lock lever and neutral switch. O* — 2750 mm 9'0"
is easily adjusted with a grease gun.
*Narrow blade for D39PX-22
Travel speed D39EX-22 D39PX-22 Ground clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385 mm 15.2"
Forward Reverse
(quick shift mode) Number of track rollers (each side) 6 6
1st 0–3.4 km/h 0–2.1 mph 0–4.1 km/h 0–2.5 mph Type of shoes (standard) Single grouser Single grouser
2nd 0–5.6 km/h 0–3.5 mph 0–6.5 km/h 0–4.0 mph Number of shoes (each side) 39 39
3rd 0–8.5 km/h 0–5.3 mph 0–8.5 km/h 0–5.3 mph Grouser height 53 mm 2.1" 53 mm 2.1"
Travel speed Shoe width (standard) 460 mm 18.1" 635 mm 25.0" HYDRAULIC SYSTEM
Forward Reverse
(variable mode) Ground contact area 21710 cm2 29970 cm2
0–8.5 km/h 0–5.3 mph 0–8.5 km/h 0–5.3 mph 3,365 in2 4,645 in2 Closed-center Load Sensing System (CLSS) designed for precise Hydraulic oil capacity (refilling):
Ground pressure 40.8 kPa 31.0 kPa and responsive control and for efficient simultaneous operation. Power angle tilt dozer . . . . . . . . . . . . . . . . . . . . . 60 ltr 15.9 U.S. gal
(with dozer, ROPS cab) 0.42 kgf/cm2 0.32 kgf/cm2
5.92 psi 4.50 psi Hydraulic control unit: Control valves:
US ton ton
15
D39-22 Track gauge 1650 mm 5'5" 1790 mm 5'10" All spool control valves externally mounted remote to the hydraulic 3-spool control valve for power angle tilt dozer.
Drawbar pull vs. speed.
Length of track on ground 2360 mm 7'9" 2360 mm 7'9" tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 Positions:
15 maximum usable pull depends on ltr/min 26.2 U.S. gal/min at rated engine rpm. Blade lift. . . . . . . . . . . . . . . . . . . . . . . Raise, hold, lower, and float
traction and weight of tractor.
Blade tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Right, hold, and left
COOLANT AND LUBRICANT Relief valve setting . . . . . . . . . . . . . 27.4 MPa, 280 kg/cm2 3,983 psi Blade angle . . . . . . . . . . . . . . . . . . . . . . . . . . Right, hold, and left
CAPACITY (REFILL) Hydraulic cylinders . . . . . . . . . . . . . . . . . . Double-acting, piston type
10 Additional control valve required for ripper.
Drawbar Pull
10 11