Professional Documents
Culture Documents
Kat A 1331 Lug Cerex300 L Wasser en 03 12
Kat A 1331 Lug Cerex300 L Wasser en 03 12
PN 10/16 - DN 50...600
KAT-A 1331-W-Lug
Product characteristics and benefits
• Resilient seated in accordance with EN 593
• Face-to-face length acc. to EN 558-1, basic series 20 (DIN 3202 / K1)
• Lug-type for flanges acc. to EN 1092-2
• Centric disk, mounted in three maintenance-free bearing bushes
• For bolting between pipe flanges
• As end-of-valve for:
- DN 50-300: 16 bar
- DN 350-400: 14 bar
- DN 450-600: 10 bar
• Replaceable rubber sleeve with integrated seal for functionally reliable use for
flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar
• Stable sealing seat due to collar with vulcanized support ring
• Tight in both flow directions
Materials
Tests and approvals
• Body: Ductile cast iron EN-JS 1030 (GGG-40)
• Disk: Stainless steel 1.4408 • Final inspection test acc. to EN 12266
• Shaft end: Stainless steel 1.4021 (DIN 3230 Part 4)
• Collar: EPDM • DVGW tested and registered
• Elastomers approved acc. to W270
Corrosion protection
Operation data
• Body: Inside and outside epoxy coating
Versions • Maximum flow velocity in fully open
position:
• Standard version as described - PN 16: 4 m/s
• With notched hand lever - PN 10: 3 m/s
• With electric actuator
Note
• With pneumatic actuator
• With worm gear unit and handwheel For proper installation and safe operation
• Bigger sizes available on request please follow the installation and operation
Field of Application instructions:
KAT-B 1331
• Installation in plants
DN PN Maximum operating Maximum operating Test pressure body with Test pressure seat with
pressure temperature for neutral water water
liquids
[bar] [°C] [bar] [bar]
50...400 16 16 100 24 18
200...600 10 10 100 15 11
PN 16 - DN 450...600 on request
We reserve the right to make technical changes and use similar or
higher-quality materials. Drawings are non-binding. • www.vag-group.com
Edition KAT-A_1331-W-Lug_CEREX300-L-stainless-steel-water_en_1-6-1 Butterfly Valves · 1
VAG CEREX® 300-L Butterfly Valve
Water
disk made of stainless steel - lug-type
Drawing
Technical data
PN 16
DN 50 65 80 100 125 150 200 250 300 350 400 450
A [mm] 125 132 140 180 190 220 240 275 300 320 380 400
B [mm] 72 80 87 113 123 155 175 205 230 270 315 327
D [mm] 87 102 112 142 161 201 252 301 356 400 450 500
D1 [mm] 98 114 132 156 185 216 268 323 377 435 485 546
E [mm] 7 7 7 7 7 10 10 12 12 14 18 18
E1 [mm] 48 48 48 48 48 48 56 56 79 79 83 110
E2 [mm] 66 66 66 66 66 66 75 75 95 95 126 148
F [mm] 50 50 50 50 50 70 70 102 102 125 140 140
G [mm] 31 51 69 91 115 149 188 239 288 329 383 412
H [mm] 5 12 19 27 37 52 70 91 111 126 149 158
H2 [mm] 155 160 170 210 220 250 270 305 340 360 420 450
H3 [mm] 120 120 120 120 120 180 195 195 295 295 380 350
H4 [mm] 140 146 155 195 205 238 258 - - - - -
H5 [mm] 225 225 225 225 225 305 305 - - - - -
ISO F05 F05 F05 F05 F05 F07 F07 F10 F10 F12 F14 F14
J [mm] 12 12 12 16 16 19 19 24 24 24 29 38
K [mm] 125 145 160 180 210 240 295 355 410 470 525 585
L [mm] 10 10 10 10 10 12 12 14 14 18 21 21
L1 [mm] 43 46 46 52 56 56 60 68 78 78 102 114
R [mm] 125 125 125 125 125 200 200 200 300 300 400 500
SQ [mm] 11 11 11 14 14 17 17 22 22 22 27 36
Number of blind 4 4 8 8 8 8 12 12 12 16 16 20
thread holes
Thread M M16 M16 M16 M16 M16 M20 M20 M24 M24 M24 M27 M27
Weight of valve [kg] 2.7 3.2 4.3 6 7.3 9.5 22.5 26.8 37.4 48 72 98
approx.
Weight with [kg] 3.4 3.8 5.0 7.1 8.0 10.5 23.5 - - - - -
notched hand
lever
Weight with [kg] 4.0 4.5 5.6 7.3 8.6 10.9 24.4 28.7 40.6 53.0 78.0 120.0
gearbox approx.
Technical data
PN 16
DN 500 600
A [mm] 460 500
B [mm] 365 435
D [mm] 550 645
D1 [mm] 606 720
E [mm] 22 22
E1 [mm] 110 143
E2 [mm] 148 260
F [mm] 165 165
G [mm] 470 560
H [mm] 181 214
H2 [mm] 510 555
H3 [mm] 350 390
ISO F16 F16
J [mm] 38 48
K [mm] 650 770
L [mm] 24 24
L1 [mm] 127 154
R [mm] 500 700
SQ [mm] 36 46
Number of blind 20 20
thread holes
Thread M M30 M33
Weight of valve [kg] 135 201
approx.
Weight with [kg] 157.0 246.0
gearbox approx.
PN 10
DN 200 250 300 350 400 450 500 600
A [mm] 240 275 300 320 380 400 460 500
B [mm] 175 205 230 270 315 327 365 435
D [mm] 252 301 356 400 450 500 550 645
D1 [mm] 268 323 377 430 480 530 582 682
E [mm] 10 12 12 14 18 18 22 22
E1 [mm] 56 56 79 79 83 110 110 143
E2 [mm] 75 75 95 95 126 148 148 260
F [mm] 70 102 102 125 140 140 165 165
G [mm] 188 239 288 329 383 412 470 560
H [mm] 70 91 111 126 149 158 181 214
H2 [mm] 270 305 340 360 420 450 510 555
H3 [mm] 195 195 295 295 380 350 350 390
H4 [mm] 262 - - - - - - -
H5 [mm] 300 - - - - - - -
ISO F07 F10 F10 F12 F14 F14 F16 F16
J [mm] 19 24 24 24 29 38 38 48
K [mm] 295 350 400 460 515 565 620 725
L [mm] 12 14 14 18 21 21 24 24
L1 [mm] 60 68 78 92 102 114 127 154
R [mm] 200 200 300 300 400 500 500 700
SQ [mm] 17 22 22 22 27 36 36 46
Number of blind 8 12 12 16 16 20 20 20
thread holes
Thread M M20 M20 M20 M20 M24 M24 M24 M27
Weight of valve [kg] 22.5 26.8 37.4 48 72 98 135 201
approx.
Weight with [kg] 23.5 - - - - - - -
notched hand
lever
Weight with [kg] 24.4 28.7 40.6 53.0 78.0 120.0 157.0 246.0
gearbox approx.
PN 10/16 - DN 50...600
KAT-A 1331-W-Gu-Lug
Product characteristics and benefits
• Resilient seated in accordance with EN 593
• Face-to-face length acc. to EN 558-1, basic series 20 (DIN 3202 / K1)
• Lug-type for flanges acc. to EN 1092-2
• Centric disk, mounted in three maintenance-free bearing bushes
• For bolting between pipe flanges
• As end-of-valve for:
- DN 50-300: 16 bar
- DN 350-400: 14 bar
- DN 450-600: 10 bar
• Replaceable rubber sleeve with integrated seal for functionally reliable use for
flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar
• Stable sealing seat due to collar with vulcanized support ring
• Vacuum tight up to 1 Torr
• Tight in both flow directions
• With bare shaft and actuator flange connection acc. to ISO 5211 Tests and approvals
Materials • Final inspection test acc. to EN 12266
• Body: Ductile cast iron EN-JS 1030 (GGG-40) (DIN 3230 Part 4)
• Disk: Ductile cast iron EN-JS 1030 (GGG-40) • DVGW tested and registered
• Shaft end: Stainless steel 1.4021 • Elastomers approved acc. to W270
• Collar: EPDM Operation data
Corrosion protection
• Maximum flow velocity in fully open
• Body: Inside and outside epoxy coating position:
• Disk: Epoxy coating - PN 16: 4 m/s
Versions - PN 10: 3 m/s
Note
• Standard version as described
• With notched hand lever For proper installation and safe operation
• With electric actuator please follow the installation and operation
• With pneumatic actuator instructions:
• With worm gear unit and handwheel KAT-B 1331
• Bigger sizes available on request
Field of Application
• Installation in plants
DN PN Maximum operating Maximum operating Test pressure body with Test pressure seat with
pressure temperature for neutral water water
liquids
[bar] [°C] [bar] [bar]
50...600 16 16 50 24 18
200...600 10 10 50 15 11
PN 16 - DN 450...600 on request
We reserve the right to make technical changes and use similar or
higher-quality materials. Drawings are non-binding. • www.vag-group.com
Edition KAT-A_1331-W-Gu-Lug_CEREX300-L-cast-iron-water_en_1-6-1 Butterfly Valves · 1
VAG CEREX® 300-L Butterfly Valve
Water
disk made of cast iron - lug-type
Drawing
Technical data
PN 16
DN 50 65 80 100 125 150 200 250 300 350 400 450
A [mm] 125 132 140 180 190 220 240 275 300 320 380 400
B [mm] 72 80 87 113 123 155 175 205 230 270 315 327
D [mm] 87 102 112 142 161 201 252 301 356 400 450 500
D1 [mm] 98 114 132 156 185 216 268 323 377 435 485 546
E [mm] 7 7 7 7 7 10 10 12 12 14 18 18
E1 [mm] 48 48 48 48 48 48 56 56 79 79 83 110
E2 [mm] 66 66 66 66 66 66 75 75 95 95 126 148
F [mm] 50 50 50 50 50 70 70 102 102 125 140 140
G [mm] 31 51 69 91 115 149 188 239 288 329 383 412
H [mm] 5 12 19 27 37 52 70 91 111 126 149 158
H2 [mm] 155 160 170 210 220 250 270 305 340 360 420 450
H3 [mm] 120 120 120 120 120 180 195 195 295 295 380 350
H4 [mm] 140 146 155 195 205 238 258 - - - - -
H5 [mm] 225 225 225 225 225 305 305 - - - - -
ISO F05 F05 F05 F05 F05 F07 F07 F10 F10 F12 F14 F14
J [mm] 12 12 12 16 16 19 19 24 24 24 29 38
K [mm] 125 145 160 180 210 240 295 355 410 470 525 585
L [mm] 10 10 10 10 10 12 12 14 14 18 21 21
L1 [mm] 43 46 46 52 56 56 60 68 78 78 102 114
R [mm] 125 125 125 125 125 200 200 200 300 300 400 500
SQ [mm] 11 11 11 14 14 17 17 22 22 22 27 36
Number of blind 4 4 8 8 8 8 12 12 12 16 16 20
thread holes
Thread M M16 M16 M16 M16 M16 M20 M20 M24 M24 M24 M27 M27
Weight of valve [kg] 2.7 3.2 4.3 6 7.3 9.5 22.5 26.8 37.4 48 72 98
approx.
Weight with [kg] 3.4 3.8 5.0 7.1 8.0 10.5 23.5 - - - - -
notched hand
lever
Weight with [kg] 4.0 4.5 5.6 7.3 8.6 10.9 24.4 28.7 40.6 53.0 78.0 120.0
gearbox approx.
Technical data
PN 16
DN 500 600
A [mm] 460 500
B [mm] 365 435
D [mm] 550 645
D1 [mm] 606 720
E [mm] 22 22
E1 [mm] 110 143
E2 [mm] 148 260
F [mm] 165 165
G [mm] 470 560
H [mm] 181 214
H2 [mm] 510 555
H3 [mm] 350 390
ISO F16 F16
J [mm] 38 48
K [mm] 650 770
L [mm] 24 24
L1 [mm] 127 154
R [mm] 500 700
SQ [mm] 36 46
Number of blind 20 20
thread holes
Thread M M30 M33
Weight of valve [kg] 135 201
approx.
Weight with [kg] 157.0 246.0
gearbox approx.
PN 10
DN 200 250 300 350 400 450 500 600
A [mm] 240 275 300 320 380 400 460 500
B [mm] 175 205 230 270 315 327 365 435
D [mm] 252 301 356 400 450 500 550 645
D1 [mm] 268 323 377 430 480 530 582 682
E [mm] 10 12 12 14 18 18 22 22
E1 [mm] 56 56 79 79 83 110 110 143
E2 [mm] 75 75 95 95 126 148 148 260
F [mm] 70 102 102 125 140 140 165 165
G [mm] 188 239 288 329 383 412 470 560
H [mm] 70 91 111 126 149 158 181 214
H2 [mm] 270 305 340 360 420 450 510 555
H3 [mm] 195 195 295 295 380 350 350 390
H4 [mm] 262 - - - - - - -
H5 [mm] 300 - - - - - - -
ISO F07 F10 F10 F12 F14 F14 F16 F16
J [mm] 19 24 24 24 29 38 38 48
K [mm] 295 350 400 460 515 565 620 725
L [mm] 12 14 14 18 21 21 24 24
L1 [mm] 60 68 78 92 102 114 127 154
R [mm] 200 200 300 300 400 500 500 700
SQ [mm] 17 22 22 22 27 36 36 46
Number of blind 8 12 12 16 16 20 20 20
thread holes
Thread M M20 M20 M20 M20 M24 M24 M24 M27
Weight of valve [kg] 22.5 26.8 37.4 48 72 98 135 201
approx.
Weight with [kg] 23.5 - - - - - - -
notched hand
lever
Weight with [kg] 24.4 28.7 40.6 53.0 78.0 120.0 157.0 246.0
gearbox approx.