Flatpack Controller
Flatpack Controller
Flatpack Controller
Power Systems
Overview:
Image
Applicable Standards
NEBS Level 3 (GR-63-CORE, GR-1089-CORE) EN 61000-4-2 Electrostatic discharge (ESD) immunity test
IEC 60950-1 EN 61000-4-3 Electromagnetic field immunity test
Electrical safety
UL 60950-1 EN 61000-4-4 Electrical fast transient/burst immunity test
EN 61000-4-5 Surge immunity test
Radiated disturbance at enclosure port
EN 55022 EN 61000-4-6 Conducted radio-frequency (RF) immunity test
Conducted emission at DC output ports
(CISPER 22) EN 61000-4-8
Conducted emission at AC mains ports Power frequency magnetic field/pulse magnetic field
EN 61000-4-9
EN 61000-3-2
Harmonic current emissions EN 61000-4-11 Voltage dips, short interruptions and voltage variations
EN 61000-3-3 20
www.eltekvalere.com
Headquarters:
Eltek Valere PAGE 2 OF 2
1303 E. Arapaho Rd. Richardson, TX. 75081, USA
Phone: +1 (469) 330-9100 Fax: +1 (469) 330-2955
Document
Flatpack2 Power Systems 2048206 R3
Distributions
Flatpack2 150A
The -48V/150A system offers five standard distribution configurations that are defined by the number and types
of circuit protection accommodated. Distribution consists of up to six protected buses, with each bus having its
own front-access, plug-in breaker position (100A max rating) and rear-access cable landing. The buses are
organized into three sets of two parallel buses, permitting each pair to be linked together by a two-pole, plug-in
breaker rated up to 175A. If no front-access battery breakers are desired, an extra set of buses is installed for
bulk output to batteries. A low-voltage disconnect (LVD) contactor can be ordered. A 12-position, 65A GMT fuse
block is also available.
Return
Landings
Breaker
Holder Cable
Landing
BUS 1
BUS 2
BUS 3
www.eltekvalere.com
Headquarters:
Eltek Valere PAGE 3 OF 3
1303 E. Arapaho Rd. Richardson, TX. 75081, USA
Phone: +1 (469) 330-9100 Fax: +1 (469) 330-2955
Document
Flatpack2 Power Systems 2048206 R3
Power Modules
Flatpack2 HE Rectifiers
Flatpack2 HE rectifiers are available in two voltages: 48V and 24V. They are hot-swap, switched-mode power
supply units.
Module Image
Flatpack Converters
Flatpack DC-DC Converters can be ordered for Flatpack2 systems. Converter shelves are delivered in sets of two
or four shelves (four or eight converters, respectively). Each shelf accommodates up to two converter modules.
In 300A, 600A, and 1200A distributions, converter output can be routed to one of the three parallel load buses.
Flatpack DC-DC
48V to 24V 24V to 48V
Converters*
Module Image
www.eltekvalere.com
Headquarters:
Eltek Valere PAGE 4 OF 4
1303 E. Arapaho Rd. Richardson, TX. 75081, USA
Phone: +1 (469) 330-9100 Fax: +1 (469) 330-2955
Document
Flatpack2 Power Systems 2048206 R3
Controller Modules
Smartpack Controller
Smartpack is a robust, comprehensive control and monitoring device used for Eltek Valere’s Flatpack2 systems.
The controller communicates with each Flatpack2 rectifier through a CAN bus and provides real-time monitoring
and control information. The Smartpack controller is accompanied by the PowerSuite software program for PC
interface. Alarm inputs and output relays can be increased by using a master/slave configuration in systems that
can accommodate two controllers.
Module Image
www.eltekvalere.com
Headquarters:
Eltek Valere PAGE 5 OF 5
1303 E. Arapaho Rd. Richardson, TX. 75081, USA
Phone: +1 (469) 330-9100 Fax: +1 (469) 330-2955