PORON 4790-92-25041 P Extra SoftSlow ReboundSupported
PORON 4790-92-25041 P Extra SoftSlow ReboundSupported
www.rogerscorp.com
TEMPERATURE RESISTANCE
Recommended Constant Use, max. SAE J-2236 90C (194F)
Recommended Intermittent Use, max. 121C (250F)
Embrittlement ASTM D 746-98 -12C (10°F)
The information contained in this Data Sheet is intended to assist you in designing with Rogers’ Elastomeric Material Solutions. It is not
intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a particular
purpose or that the results shown in this Data Sheet will be achieved by a user for a particular purpose. The user should determine the
suitability of Rogers PORON Polyurethane Foam Materials for each application. The Rogers logo, Helping power, protect, connect our world, and
PORON are trademarks of Rogers Corporation or one of its subsidiaries. © 2003, 2004, 2008, 2017 Rogers Corporation, All rights reserved. Printed in
U.S.A., 1217-PDF, Publication #17-088
PORON® 4790-92-25041-04P Extra Soft - Slow Rebound - Supported, Continued
PROPERTY TEST METHOD VALUE
OUTGASSING
Fogging SAE J-1756 Pass
Outgassing
Total Mass Loss (TML) % ASTM E 595-93 1.44
Collected Volatile Condensable Materials (CVCM) % 24 hrs @125C (257F) @ <7 kPa (1.02psi) 0.27
Water Vapor Regain (WVR) % 0.44
ENVIRONMENTAL
Water Absorption, High Humidity Exposure, AMS 3568-95 2
% weight gain, typical
Water Absorption, Immersion Testing, ASTM D 570-95 14
% weight gain, typical
The data mentioned above represents results of testing the PORON polyurethane foam only. PORON cellular polyurethane material is supported by
being directly cast onto 2 mil polyester film. By casting directly onto the film, a permanent bond is created. Please see physical property data for the
film as represented by manufacturer below.
Notes:
All metric conversions are approximate.
Additional technical information is available.
Typical values should not be used for specification limits.
The information contained in this Data Sheet is intended to assist you in designing with Rogers’ Elastomeric Material Solutions. It is not
intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a particular
purpose or that the results shown in this Data Sheet will be achieved by a user for a particular purpose. The user should determine the
suitability of Rogers PORON Polyurethane Foam Materials for each application. The Rogers logo, Helping power, protect, connect our world, and
PORON are trademarks of Rogers Corporation or one of its subsidiaries. © 2003, 2004, 2008, 2017 Rogers Corporation, All rights reserved. Printed in
U.S.A., 1217-PDF, Publication #17-088