Professional Documents
Culture Documents
Design of PMSM
Design of PMSM
Vol.03,Issue.16
July-2014,
Pages:3289-3293
www.semargroup.org,
www.ijsetr.com
Abstract: Conventional permanent magnet synchronous motors are popularly used in electric vehicle application. This study
addresses the theoretical design of a conventional permanent magnet synchronous motor (PMSM) for electric vehicles. The
study applies to both surface mounted and inset magnet rotor configurations. Various losses estimations are embedded into the
design procedures to ensure that the desired overall drive performance is achieved. Influences of parameters such as air gap size
and magnet material on the performances are studied. Application of neodymium-iron-boron (Nd2Fe14B) and samarium cobalt
(Sm2Co17) rare earth magnets results in high torque and power density, efficiency, and controllability, reliability, and
ruggedness. Design of 47 kW PMSM with various magnets for electric car is presented.
VII. ACKNOWLEDGEMENT
First of all, the author would like to acknowledge the
support and the encouragement of Prof. Dr. Myint Thein,
Pro-rector, Mandalay Technological University. The author
is deeply indebted to Dr. Khin Thuzar Soe, Associate
Professor and Head of Department of Electrical Power
Engineering, Mandalay Technological University, for her
invaluable help and indispensable guidance. The author
wishes to extend grateful thanks to her supervisor, U
ThetTin,, Lecturer, Department of Electrical Power
Engineering, Mandalay Technological University, for his
supervision, critical reading of manuscript and tolerance
helped in all the time of this research work. The author is also
special thanks to all her teachers and friends who help in
preparation of this paper. The author specially thanks to her
family, especially her beloved parents, for their supports and
encouragements to attain her destination without any trouble.
VIII. REFERENCES
[1] Anonymous, "Electric Vehicles: Charged with
Potential", Royal academy of engineering, 2010.
[2] Bhim Singh, B.P.Singh, S Dwivedi, “A State of Art on
Different Configurations of Permanent Magnet Brushless
Machine”, 2002.
[3] Jacek F. Gieras Mitchell Wing, “Permanent Magnet
Motor Technology design and application”, 2nd, Ed 2002.
[4] TayfunGundugdu, “Design of Permanent Magnet
Machines with Different Rotor Type”, 2000.
[5] Miss SisudaChaithongsuk, “Design and Construction of a
Permanent Magnet Synchronous Motor”, ISBN 974-190-
887-3, 1989.