Professional Documents
Culture Documents
Coating Standart
Coating Standart
If a shop primer is considered left on the surface to form an integrated part of the final coating
system, it shall be applied in accordance with the following requirements:
Blast cleaning shall comply with ISO 8501-1 Sa 2½ and the surface shall remain at Sa 2½ until
application of the primer. The primer shall consist of 1 coat zinc ethyl silicate primer with 15m
thickness. Measured on a plane polished steel or glass test plate, the dry film thickness shall be
maximum 25µm.
NORMATIVE REFERENCES
The following standards include provisions, which, through reference in this text, constitute
provisions of this NORSOK standard. Latest issue of the references shall be used unless otherwise
agreed. Other recognised standards may be used provided it can be shown that they meet or exceed
the requirements of the standards referenced below.
ASTM D823 Method of producing films of uniform thickness of paint, varnish, lacquer
and related products on test panels.
ASTM D1141 Specification for substitute ocean water.
ASTM D1650 Method of sampling and testing shellac varnish.
ASTM G8 Test method for cathodic disbonding of pipeline coatings.
ASTM G 53 Recommended practice for operating light- and water-exposure apparatus
(fluorescent UV-condensation type) for exposure of non-metallic materials.
BS 5493 Code of practice for protection of iron and steel structures against corrosion.
DIN 8566 Zusätze für das termische Spritzen.
DIN 32521 Acceptance test and quality control for thermal spraying equipment.
ISO 1461 Metallic coatings - Hot-dip galvanised coating on fabricated ferrous
products - Requirements.
ISO 1513 Paints and varnishes - Examination and preparation samples for testing.
ISO 1514 Paints and varnishes - Standard panels for testing.
ISO 2811 Paints and varnishes - Determination of density.
ISO 2812 Paints and varnishes - Determination of resistance to liquids.
ISO 2814 Paints and varnishes - Comparison of contrast ratio (hiding power) of paint
of the same type and colour.
ISO 3251 Paints and varnishes - Determination of non-volatile matters of paints,
varnishes and binders for paint and varnishes.
ISO 4624 Paints and varnishes - Pull-off test for adhesion.