Professional Documents
Culture Documents
Methods of Cooking
Methods of Cooking
Foods are composed of proteins, fats, carbohydrates, and water, plus small amounts of other
compounds such as minerals (including salt), vitamins, pigments (coloring agents),and flavor
elements.It is important to understand how these components react when heated or mixed
with other foods.You will then be better equipped to correct cooking faults when they occur
and to anticipate the effects of changing cooking methods, cooking temperatures, or
ingredient proportions. In other words,when you know why foods behave as they do,you can
understand how to get them to behave as you want them to.
CARBOHYDRATES
1. Starches and sugars are carbohydrates. Both compounds are present in foods in many
forms.They are found in fruits,vegetables,grains,beans,and nuts.Meats and fish also
contain a small amount of carbohydrate.
2. For the cook,the two most important changes in carbohydrates caused by heat are
caramelization and gelatinization.
Caramelization is the browning of sugars.The browning of sautéed
vegetables and the golden color of bread crust are forms of caramelization.
Gelatinization occurs when starches absorb water and swell.This is a major
principle in the thickening of sauces and in the production of breads and
pastries.
Acids inhibit gelatinization. A sauce thickened with flour or starch will be thinner if it
contains acid.
1. Fiber is the name for a group of complex substances that give structure and firmness
to plants.Fiber cannot be digested.
2. The softening of fruits and vegetables in cooking is, in part, the breaking down of
fiber.
3. Sugar makes fiber firmer.Fruit cooked with sugar keeps its shape better than fruit
cooked without sugar
4. Baking soda (and other alkalis) makes fiber softer.Vegetables should not be cooked
with baking soda because they become mushy and lose vitamins
HEAT TRANSFER
The transference of heat is of great importance to the culinarian. It is this movement of heat
from one surface, product, etc., to another that is a determining factor in the quality of any
product produced. In order to understand how to gain positive effects from the transfer, you
need an understanding of what heat is.
Heat
Simply put, heat is a form of energy. When a substance gets hot and absorbs energy, the
molecules have more energy than when cold. The molecules then vibrate and bounce off of
one another and expand in volume.
Methods of Heat Transfer
The process of cooking requires the transfer of heat energy throughout the food by a
combination of conduction, convection and radiation.
Conduction
Heat is transferred through solids by conduction. This takes place in the heating of
1. Solid food
2. Cooking equipment Solid materials such as metals which allow heat energy to spread
easily through them are termed good conductors
Convection
Heat is transferred through liquids and air by convection. This takes place in the heating of
1. The cooking medium
2. The air inside ovens.
Radiation
COOKING METHODS
DRY HEAT METHODS
• Grilling
• Roasting
• Spit roasting
• Baking
• Deep frying
• Shallow frying
• Barbecuing
• Microwave
• Boiling
• Blanching
• Par boiling
• Poaching
• Steaming
• Pressure cooking
• Enpapillote
• Sous vide
ROASTING
The term roasting is given to three different techniques of cooking. In all cases the term
refers to a dry method of cooking involving either the addition of fat/oil or the use of foods
with a high fat content. The three techniques are: 1. Spit-roasting 2. Pot-Roasting 3.
Oven Roasting
1. Spit Roasting
This is the traditional use of the term roasting and is only applicable to cooking meats.
It could be more accurately described as slow grilling on it involves cooking by radiated
heat, on a spit, over a very fierce glowing fire. The meat is prevented from drying out by
the constant rotation of the spit which allows the meat to baste itself with hot fat which
oozes from the surface.
Pot roasting uses a cooking utensil with a fight fitting lid. It is not a true roast because it uses
moist heat. i.e. steam trapped under the lid of the closed utensil. The food is cooked with
vegetable called matignon and butter (the only type of fat suitable) or mirepoix. Just
before it is fully cooked the lid is removed to allow the steam to escape and the dry heat to
colour the food. The juices and veg an used to make the accompanying sauce. Pot roasting
is suitable for duck, poultry, game.
Note: Matignon: An edible mirepoix that is often used in Poele'ed dish. Typically,
matignon includes two parts of carrot, one part celery, one part leeks. One part onion, one
part mushroom and one part ham and bacon.
3. Oven Roasting
Food is cooked in an oven by dry heat at quite high temperatures. A small amount of fat or
oil is used to stop the food drying out. Heat transfer Radiation, Convection, Conduction
Advantages
1. Minimal fire risk
2. Meat juices from the meat can be used for gravy which enhance the flavor
3. Gives a variety to the menu
Disadvantages
1. Constant attention is required
2. Losses of nutrients like amino acids
Safety Rules
1. The correct degree of cooking of meats must be accurately measured to protect
the consumer from parasitic worms and pathogenic bacteria.
2. Care should be taken when handling oven trays to prevent spillages of hot fat.
3. Safe practices should be observed in operational procedure, clothing and footwear.
BAKING
This is a dry method of cooking in an oven. The texture, surface, volume of baked
goods are modified by steam. This is produced by the food as it cooks or can be injected in
to the oven if required.
Heat transfer
The heat source in the oven radiates infrared heat energy and also heats the air in the oven
cavity directly and also heats the air in the oven cavity directly be producing convection
currents. The surface of the food will absorb heat from both sources and also from the hot
trays and racks by conduction.
Advantages:
1. Flavour and texture are improved.
2. Variety of dishes can be made
3. Uniform and bulk cooking can be achieved e.g. bun and bread.
Disadvantages:
Special equipment and skill are required.
Safety Rules
1. Care is needed in moving heavily loaded trays, into and out of ovens to prevent burns
and scalds from the hot and steamy oven atmosphere.
2. The food-handler should take care when removing baked items from
trays/bins/moulds.
3. Safe practice should be observed in operational procedure, clothing and footwear.
GRILLING_AND_BARBECUING
Grilling is a fast, dry method of cooking which uses the intense heat radiated by an
electrical element, gas flame, or glowing charcoal. The heat sources can be either above
or below the food or both.
Barbecue: When the process takes place. Out of doors it is usually referred to as
'Barbecuing'. The heat source in this situation is usually glowing charcoal, a gas flame or
an open wood fire, positioned below of the food.
1. Grilling over the heats: This is cooking on greased grill bars with the help of fat
over direct heat only first class cuts of meat is used to grill in this methods.
2. Grilling under the heat: In this method food is put in a tray as dish and kept under
heat pans. Salamander is one of the best example for this type of griller.
Advantages
Disadvantages
1. Grilled foods cannot be successfully reheated and are difficult to keep warm
without drying and toughening. They need to be served straight away.
2. Only tender cuts of meat, which are generally more expensive, can be used.
However other foods such as vegetables, kababas are suitable for grilling.
Safety Rules
1. Do not leave food unattended whilst cooking. It will quickly over cook and burn.
2. Keep floor areas free from spilt grease as this can lead to slippery and dangerous
flours.
3. Exercise great care when adjusting grill bars or salamander racks. They an heavy
and contain
4. hot food and oil.
5. Exercise great care when adjusting grill bears or salamander racks. They are heavy
and contain hot food and oil.
FRYING
Frying is a quick method of cooking food in hot oil or fat, but requires care and attention to
produce satisfactory results. Frying gives food a good flavour and colour.
Methods of Frying
1. Shallow Frying : This is a dry method of cooking. Foods to be shallow fried are cooked
in a small amount of fat or oil the level of fat can be any where from halfway up the side of
a food.
Heat Transfer
The food cooks by direct heat conduction from the metal surface. The frying medium may
aid the process if a sufficient depth is used or merely serve as a thin lubricating layer to stop
sticking and burning.
2. Deep Frying: Deep frying involves the complete immersion of food in hot fat or oil. It is
not in contact with any surface of the frying vessel.
a) Sauteing: Sauteing is tossing the food in the pan during cooking so that it cooks and
browns on all sides. The name comes from the French for 'to jump'. Some times the
food is described as sauteed even if it is too big to be tossed in the pan (Sauteed
Chicken) this simply means it has been turned so that it is browned all over.
b) Stir-fry: A traditional method of Chinese cookery used for fast frying vegetables and
thin strips of meat in a specially designed utensil termed a wok. The base of the wok
is rounded with high sides so that only a small amount of food is in contact with the heat
and there fore, stirring is the only action needed to control browning.
c) Meuniers: Literally this term means 'in the style of a miller's wife'. It describes a
method of cooking which applies mainly to fish. Fish cooked in this way is seasoned,
lightly floured (Presumably the connection with the miller) and shallow fried in butter or
oil. The fish is sprinkled with lemon juice, garnished with slice of lemon and finished
with beurre noisette and chopped parsley.
Advantages
Disadvantages
1. Some times the food may become oily or soggy with too much absorption of oil.
2. More attention is required while cooking and care should be taken to avoid accidents.
3. The food becomes very expensive.
4. Fried food takes long time to digest.
5. Repeated use of heated oils may produce harmful substances and reduce the smoking
point.
Safety Rules
1. All operators must be trained not only to use the equipment, but also in fire drill
procedure.
2. The correct level of frying medium should be used.
3. The fryer must not be overloaded as this may cause hot oil/fat overflow.
4. Drain wet foods and then dry with absorbent paper. This prevents splatters of hot fat
reaching the skin of the food handler.
5. Pans must be moved carefully on the stove top to prevent splattering and burns.
MICROWAVE_OVENS
1.Reflection
Microwaves are reflected by metal; they cannot pass through it. Microwaves bounce off
the metal surfaces (walls, ceiling and floor) of the oven cavity in a regular pattern.
2. Transmission
Microwaves are transmitted by other materials, such as glass, ceramics, paper and some
plastics. Microwaves can pass through these substances without heating them up.
3. Absorption
Microwaves are absorbed by the moisture molecules in foods. The microwaves can only
penetrate to about 5 cm (2 in) but the food then heats through by conduction.
Advantages
1. They cook many foods in about 1/4 th of the time necessary on a gas burner. There is
no wastage of energy.
2. It saves time in heating frozen foods. Thawing can be done in minutes or seconds
3. Only the food is heated during cooking. The oven or the utensil does not get heated
except under prolonged heating periods.
4. Flavour and texture do not change when reheated in a microwave oven.
5. Loss of nutrients is minimised.
6. After cooking in a microwave oven washing dishes is much easier as food does not
stick to the sides of the vessels.
7. Food gets cooked uniformly.
8. Preserves the natural colour of vegetables and fruits.
Disadvantages
1. Due to short period of cooking, food does not become brown unless the microwave
has a browning unit.
2. It is not possible to make chapati or tandoori rotis in it. It cannot cook soft or hard
boiled eggs. Deep frying necessary for puris, jalebis, pakoda, vadas cannot be done in
it.
3. The short cooking time may not give a chance of blending of flavours as in
conventional methods.
4. The operator should be careful in operating the microwave oven since any exposure to
micro wave oven causes physiological abnormalities.
5. If the food is greater than 80 mm the central portion is out of range of the microwave
radiation will only heat by the normal slow process of conduction. It will be relatively
uncooked while the exterior accessible to microwave is cooked in minutes or seconds.
1. POACHING
This is a moist method of cooking in which food is placed in liquid which is brought to
and maintained at, a temperature just under boiling-point (650 to 900 C). The cooking liquid
may be water, milk, stock, wine, or court bouillon.
Heat Transfer
Conduction and Convection
Depth Liquid
1. Shallow – Poaching: Most foods are poached by this method. A minimum amount
liquid is added and this is later used to make an accompanying sauce. Greased
paper or a lid can be used to trap moisture and prevent drying out.
2. Deep – Poaching: When poaching some items, more liquid is used than in shallow -
poaching. In the case of fruits this is because they have to be completely covered to
prevent discolouration. In other cases with eggs, a depth of water is needed to
prevent food sticking to the cooking dish (or) other pieces of food during cooking.
Method Poaching
1. Heat the liquid to boiling point, then reduce the temperature that there is no
movement.
2. Gently lower the food in to the cooking liquid (The exception is when cooking whole
large fish, as it is placed in the cold liquid and drought up to temperature)
3. Allow the food to remain in the liquid until cooked.
4. Remove the food and reserve the liquid if it is used for a sauce.
Advantages
1. The application of heat is gentle, so foods with delicate texture may be cooked
without breaking up.
2. Poached foods are easily digested
3. No fat needs to be added to cook the food an advantage for people who want to
reduce the amount of fat in their diet.
Disadvantages
1. Poaching is not particularly suitable for large pieces of food
2. There is some flavour and nutrient loss from the food the cooking liquid.
3. There is little development in colour and flavour.
Safety Rules
1. Equipment should be matched to the quantity of food to prevent spillages.
2. Care should be taken in handling dishes which an brought to temperature on the top of
the stove and thin transferred to the oven.
2 BOILING:
This is a moist method of cooking in which foods are immersed in liquid which is either
at or brought to boiling point. This liquid may be water stock, milk or court bouillon.
Heat Transfer
Heat is conducted through the equipment surfaces to the liquid in contact with them. The
liquid transfers this heat to the food by convection currents. Heat is absorbed by the surface
of the food and passes through it by conduction and the food cooks.
1. Simmering
This is gentle heat treatment which causes small bubbles to rise slowly from the liquid. The
food remains whole, with a better texture and more and flavour. The water does not
evaporate so quickly and less vigilance is required to maintain the correct level of liquid.
2. Parboiling
Parboiling is the boiling of food until it is only partially cooked. The food is placed in
boiling water for a short time from 1 to 5 minutes, or until the outside become soft. The
cooking process is then completed using another method. Potatoes for example may be
parboiled to reduce roasting time and to help brown them and give a crisper texture.
3. Blanching
Blanching does involve placing food in boiling water. Food is plunged into boiling water
for 1 to 2 minutes depending on the size of the food and then removed. It is then
immediately refreshed in cold water.
Advantages
1. Tougher, cheaper cuts of meat may be used.
2. Heat transfer is fairly rapid and efficient
3. The food is not likely to burn unless the water is allowed to evaporate completely.
4. The food remains moist and is not likely to dry out and become hard.
Disadvantages
1. Flavour and some colour may be lost from the food into liquid.
2. Loss of nutrients (especially water-soluble vitamins) may be high.
Safety Rules
1. The boiling utensil should be matched with the quantity of food to be cooked. If not
enough space is available water will spill as it boils.
2. The food handler should take care when placing foods into or removing items from,
boiling liquids.
3. When reducing liquids adequate ventilation should be available to remove steam from the
atmosphere. Condensation can cause slippery floors and dampness on electrical appliances.
3.STEAMING
This is a moist method of cooking using steam. The food is surrounded by steam under
varying degrees of pressure.
1. Atmospheric Steamers: This equipment is vented so that steam can escape and stop
pressure building up. This a slow method of cooking but has advantages which are
described later.
2. Convection Steamers: The steam is forced around the oven at high speed by means
of a fan or steam jets. Just as in forced convection ovens, this method increases the
heat transfer at the surface of the food and reduces cooking time.
Advantages
1. Healthy - No fats or other additives an needed for cooking.
2. No risk of burning food.
3. Ideal for those with poor digestions
Disadvantages
1. Can be slow
2. Warm-up time of large industrial steamers is slow and not economical unless it is fully
filled.
3. Meat and fish juices may be lost (They should be incorporated in to sauces wherever
possible).
4.PRESSURE COOKING
Pressure cooking makes use of steam from water boiled in a sealed container. The boiling
point of water varies according to air pressure. The higher the pressure the higher the
boiling point. Under normal atmospheric conditions at sea level, water boils at 100 C.
Inside a pressure cooker the pressure can be increased so that water will boil at 120 C steam
from the boiling water is driven through the food, cooking it very quickly.
Disadvantages
1. Easy to over cook (or) Under cook
2. Greater Shrinkage of meat
Safety Rules
1. Before use, check that the water level is correct for self generation equipment.
2. Switch off all steam controls and reduce pressure before opening.
3. Stand behind the door as it opens to strield the body from steam.
5.SOUS – VIDE
Sous – vide is a system of catering where food is vacuum packaged, either before or after
cooking, and then rapidly cooled to chilling temperatures (0-3 C). It is then
stored/transported at this temperature with subsequent regeneration as required.
To make sure temperatures are correct for serving and cooking, small temperature probes are
used. A single probe is used to monitor the temperature of one item in a batch of similar
dishes.
Foods prepared in this way are handled with the same equipment and care as for cook-chill.
Government guidelines for hygiene are applicable. Below is therefore only an account of the
packaging of the sous vide product and its uses.
Advantages:
1. Ability to produce mealsin advance means better deployment of ataff and skills.
2. Vaccum packed food can be mixed in cold store without the risk of gross contamination.
3. Reduced labour costs at point of service.
4. Full flavour and texture is returned as food cooks in its own juices.
5. Economics on Ing.
Disadvantages
1. Extra cost of vaccum pouches and vaccum paking machine.
2. All portions ina batch must be identcally sized to ensure even results.
3. Extremely tight management and hygieneic controls an dimparative.
6.EN PAPILLOTE
The term “en papillote” comes from the french word for papillote because the parchment
traditionally used for wrapping up the food somewhat butterfly In this variation of
steaming, the main item and accompanying ingredients are encased in parchment paper
and cooked in a hot oven. The main item rests on a bed of herbs, vegetables, or sauce
and the combination of these ingredients and their natural juices serves as the sauce.
The steam created by the food’s natural juices cooks the food. As the steam volume
increases, the paper puffs up.
Mise en Place
Vegetables can be included to provide moisture for steam. They also add color, flavor, and
texture. Cut the vegetables into a fine julienne or dice. Sweat or blanch the vegetables, if
necessary, to ensure that they will cook in the same amount of time as the main item.
Prepare herbs and spices according to type. Some herbs may be left in springs; others are cut
into a chiffonade or minced. Have a prepared sauce, reduced heavy cream, wine, or citrus
juices on hand if your recipe calls for them.
Method
Assemble the packages
The method for cutting the parchment and making the individual packages. Cut the
parchment into a heat shape large enough to allow the food and any additional ingredients to
fit comfortably without overcrowding. The paper needs to have enough “give” to expand
during cooking. Oil or butter the paper on both sides to prevent it from burning.
Place a bed of aromatics, vegetables, or sauce on one half of the heart and top it with the
main item.
Fold the empty half of the heart over the main item and fold and crimp the edges of the paper
to form a tight seal.
Place the bag on a preheated sizzler platter and put it in a very hot oven
The hot oven temperature may need to be carefully monitored, since delicate foods such as
fish fillets can be overcooked quickly at a high temperature. A thicker cut may be best if
cooked slowly at a moderate temperature and “puffed” in a very hot oven.
Foods prepared en papillote should be cooked until they are just done. This is difficult to
gauge without experience, since you cannot apply the senses of sight and touch in
determining doneness. If the item has been cut to the correct size or if it has been partially
cooked before being placed en papillote, it should be done when the bag is very puffy and the
paper is brown.
1. BRAISING
Heat Transfer
Conduction and convection
Method of Braising
Braised dishes are classed on either white or brown. Brown braising involves the
colouring of meat in hot fat (searing) before cooking.
For brown braising Espagnole is diluted with an equal quantity of stock and used on
the cooking liquor (e.g. braised beef)
White braising involves white stock and natural Ingredients.
Marinating: Some meats are soaked in flavoured alcohol or acid to tenderise and
improve flavour and colour, prior to cooking.
Glazing: Some of meat dishes are glazed towards the end of cooking period. The
lid is taken off the braising pot and the cooking liquor is spooned over the
commodity at regular internals. The procedure called "MASKING". The water
present in the liquid evaporates from the surface of the food leaving behind a
gelatinous satiny glaze.
Advantages
1. Tougher, Cheaper cuts of meat may be used.
2. Less amount of fat is used in the cooking.
3. There is little loss of nutrients.
Disadvantages
1. Cooking time is long and slow
2. Over cooking will produce discolouration and disintegration of the product.
Safety
1. Hot liquids and utensils can be the cause of serious burns.
2. Equipment should be matched to the quantity of food to prevent spillages.
3. Care should be taken when removing the lid of braising pans to avoid scalds from
escaping steam.
4. Safety practice should be observed in operational procedure, clothing and footwear.
2.STEWING
This is a long, slow, moist method of cooking in which small pieces of food are simmered
in a minimum amount of liquid. The liquid which may be water, stock or prepared sauce,
is always served with the food. The stew is cooked in a dish with tightly fitted lid, either on
top of the stove or inside the oven.
Heat Transfer
Heat is conducted through the cooking utensil and to the surfaces of the food in contact with
it. It is carried to all areas of the cooking liquid by convection currents, heat reaching the
surface of the food then passes through it by conduction the food then cooks.
Types of Stew
1. Blanquette: A stew cooked in stocks from which for sauce is made.
2. Fricassee: A stew in which the meat, poultry or firm is cooked in the sauce.
3. Navarin:. Refers to the rich dark lamb stew.
4. Ragout: Stew brown beef stew.
5. Bouillabuisse : A heavily fish are shell fish with safforn. A traditional specially of France
Advantages
1. Stewing is economical as cheaper cuts of meat may be used.
2. There is little loss of nutrients or moisture as any juices which escape from the
meat or vegetable become part of the sauce.
Disadvantages
1. Stews must be cooked for a long period to ensure tenderness and full flavour.
2. Some stews lack 'bite' and contrast in texture.
Safety Rules
1. Equipment should be matched to the quantity of food and liquid to prevent
spillages.
2. It is important to avoid scalds from steam when removing lids to check
consistency.
3. Safe practice should be observed in operational procedure, clothing and
footwear.
• Boiling
• Blanching
• Par boiling
• Poaching
• Steaming
• Pressure cooking
• Enpapillote
• Sous vide