Professional Documents
Culture Documents
How Do You Make Paper From A Tree
How Do You Make Paper From A Tree
By Stacy Wonders
If you look at a tree, you might have a hard time imagining how something so tall and
strong could be turned into something as thin and weak as a sheet of paper. The
process begins with the raw wood, which is made up of fibers called "cellulose."
The cellulose fibers are stuck together with natural glue called "lignin." When the lignin is
removed and the cellulose fibers are separated and reorganized, paper can be made.
It's also possible to make paper from a variety of other types of plant fibers, such as
cotton, flax, bamboo, and hemp. For example, cotton fibers are often used to make
the paper that money is printed on. The overwhelming majority (about 95 percent) of
the raw material used to make paper, though, comes from trees.
To make paper from trees, the raw wood must first be turned into "pulp." Wood pulp is a
watery “soup" of cellulose wood fibers, lignin, water, and the chemicals used during the
pulping process.
Wood can be turned to pulp in a couple of different ways. Mechanical pulping involves
using machines to grind wood chips into pulp.
The resulting pulp retains most of its lignin, though. The short fibers created by grinding
leads to weak paper most suitable for newsprint, phone books, or other types of low-
strength papers.
The more commonly used method is chemical pulping, also known as “kraft."
Chemicals are used to separate lignin from the cellulose fibers, leaving a pulp mixture
that can make stronger papers.
Depending on what type of paper is desired, the pulp mixture might need to be
bleached to create whiter paper. Papermakers use a variety of chemicals to bleach
pulp to the color they want.
Once the pulp is ready, it is then used to make paper in a process that is quite similar (in
the basic actions) to the process first used by the ancient Chinese more than 1,900
years ago. Because the pulp mixture is so watery (sometimes as much as 99 percent
water!), the cellulose fibers need to be separated from the watery mixture.
Huge machines spray the pulp mixture onto moving mesh screens to make a layered
mat. The mat of pulp then goes through several processes to remove water and dry it
out.
Finally, the mat is run through heated rollers to squeeze out any remaining water and
compress it into one continuous roll of paper that can be up to 30 feet wide.
When the paper has the desired thickness, it may be colored or coated with special
chemicals to give it a special texture, extra strength, or water resistance. As a last step,
the paper rolls are cut to size and packaged for shipping to other facilities for additional
processing to turn it into all sorts of specialized papers.