Professional Documents
Culture Documents
Bilstein MSDS
Bilstein MSDS
* 1 Identification of substance
· Product details
· Trade name: Einrohrdämpfer
Mono tube shock absorber
· Application of the substance / the preparation Shock Absorber
· Manufacturer/Supplier:
ThyssenKrupp Bilstein Tuning GmbH
Milsper Straße 214
D-58240 Ennepetal
Tel: +49 2333-791- 0
Fax: +49 2333-791-4900
· Information department:
Tel: +49 2333-791-4780
Email: [email protected]
· Emergency information: Tel: +49 2333-791- 0
* 2 Composition/Data on components
· Chemical characterization
· Description: The shock absorber contains nitrogen and small amounts of hydraulic oil.
· Dangerous components: Void
· Additional information:
The mono tube absorbers contain up to 0.3 l compressed gas (nitrogen) at a pressure of 5 to 30
bar.
The maximum product of pressure and volume is 18 bar * l.
* 3 Hazards identification
· Hazard description: Not applicable.
· Information pertaining to particular dangers for man and environment:
Warning! Pressurized container.
Nitrogen is suffocating by replacing ambient oxygen.
The product does not have to be labelled due to the calculation procedure of international
guidelines.
· Classification system:
The classification was made according to the latest editions of international substances lists, and
expanded upon from company and literature data.
· NFPA ratings (scale 0 - 4)
Health = 0
0 Fire = 0
0 0 Reactivity = 0
· HMIS-ratings (scale 0 - 4)
HEALTH 0 Health = 0
FIRE 0 Fire = 0
REACTIVITY 0 Reactivity = 0
DR
Page 2/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 09/03/2009 Reviewed on 09/03/2009
(Contd. of page 1)
· After skin contact: Generally the product does not irritate the skin.
· After eye contact: If symptoms persist consult doctor.
· After swallowing: Swallowing is not considered to be a possible way of exposure.
DR
Page 3/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 09/03/2009 Reviewed on 09/03/2009
(Contd. of page 2)
DR
Page 4/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 09/03/2009 Reviewed on 09/03/2009
(Contd. of page 3)
11 Toxicological information
· Acute toxicity:
· Primary irritant effect:
· on the skin: No irritant effect.
· on the eye: No irritating effect.
· Sensitization: No sensitizing effects known.
· Additional toxicological information:
When inhaling high concentrations narcotic symptoms are possible.
The product is not subject to classification according to internally approved calculation methods for
preparations:
12 Ecological information
· General notes:
Water hazard class 1 (Self-assessment): slightly hazardous for water
The product contains materials that are harmful to the environment.
13 Disposal considerations
· Product:
· Recommendation: Contact manufacturer for recycling information.
· Uncleaned packagings:
· Recommendation: Dispose of packaging according to regulations on the disposal of packagings.
14 Transport information
· Land transport ADR/RID (cross-border):
DR
Page 5/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 09/03/2009 Reviewed on 09/03/2009
(Contd. of page 4)
* 15 Regulations
· Sara
· Section 355 (extremely hazardous substances):
None of the ingredient is listed.
· Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
· TSCA (Toxic Substances Control Act):
All ingredients are listed.
· Proposition 65
· Chemicals known to cause cancer:
None of the ingredients is listed.
· Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
· Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
· Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
· Cancerogenity categories
· EPA (Environmental Protection Agency)
None of the ingredients is listed.
· IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
· NTP (National Toxicology Program)
None of the ingredients is listed.
(Contd. on page 6)
USA
DR
Page 6/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 09/03/2009 Reviewed on 09/03/2009
(Contd. of page 5)
· TLV (Threshold Limit Value established by ACGIH)
None of the ingredients is listed.
· AGW (German Maximum Workplace Concentration)
None of the ingredients is listed.
· NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
· OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
· Canadian substance listings:
· Canadian Domestic Substances List (DSL)
All ingredients are listed.
· Canadian Ingredient Disclosure list (limit 0.1%)
None of the ingredients is listed.
· Canadian Ingredient Disclosure list (limit 1%)
None of the ingredients is listed.
· Product related hazard informations:
Although this product is not subject to identification regulations, we recommend that the safety
suggestions are observed.
The product is not subject to identification regulations according to directives on hazardous
materials.
· Safety phrases:
Keep in a cool place.
· National regulations:
· Other regulations, limitations and prohibitive regulations
The regulations concerning pressure vessels and gases under pressure have to be observed.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee
for any specific product features and shall not establish a legally valid contractual relationship.
· Department issuing MSDS:
This Material Safety Data Sheet has been drawn up in cooperation with:
DEKRA Umwelt GmbH, Hanomagstr. 12, D-30449 Hannover,
Tel.: +49.511.42079-311.
· * Data compared to the previous version altered.
USA
DR
Rev.: 1 ThyssenKrupp Bilstein
Date: 11/12/02 MATERIAL SAFETY DATA
Page: 1 of 5 SHEET
MSDS Number Monotube 1
GAS CHARGED SHOCK ABSORBER (MONOTUBE)
ES4.4.3-01(0)
Rev.: 1
Date: 11/12/02 MATERIAL SAFETY DATA
Page: 2 of 5 SHEET
MSDS No. – Monotube 1
ES4.4.3-01(0)
Rev.: 1
Date: 11/12/02 MATERIAL SAFETY DATA
Page: 3 of 5 SHEET
MSDS No. – Monotube 1
Use foam, dry chemical or carbon dioxide to extinguish fires involving hydraulic fluid. Water may be inef-
fective and cause fire to spread. Product in or near fires should be cooled with a water spray or fog to pre-
vent over-pressuring and possible bursting or rupture of product. A self-contained breathing apparatus
(SCBA), operating in positive pressure mode and full fire fighting protective clothing should be worn for
combating fires.
NOTICE TO USERS:
ThyssenKrupp Bilstein requests product users study this material safety dada sheet (MSDS) and become aware of
product hazards and safety information. To promote safe product use, 1) notify employees, agents, and contractors of
MSDS information and any product hazard and safety information, 2) furnish same information to all customers for this
product and 3) request customers notify their employees and customers of product hazards and safety information.
Opinions expressed herein are those of qualified experts within ThyssenKrupp Bilstein. We believe information con-
tained herein is current as of the date of this MSDS. Since product use is not within control of ThyssenKrupp Bilstein,
it is user’s obligation to determine conditions of safe product use.
ES4.4.3-01(0)