Scribd Logo
Upload

Welcome to Scribd!

  • NS3 Installation Guide (Tested On Ubuntu 16.04)

    Uploaded by

    nangaayissi
    40 views1 page
    $ sudo apt-get update && sudo apt-get install gcc g++ python python-dev mercurial bzr gdb valgrind gsl-bin libgsl0-dev libgsl0ldbl flex bison tcpdump sqlite sqlite3 libsqlite3-dev libxml2 libxml2-dev libgtk2.0-0 libgtk2.0- dev uncrustify doxygen graphviz imagemagick python-pygraphviz python-kiwi python-pygoocanvas libgoocanvas-dev python-pygccxml. Extract ns-allinone-3.25.tar.bz2 and run commands to build and configure NS-3 and check installation,

    Original Description:

    bon courds

    Original Title

    NS3 Installation

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    $ sudo apt-get update && sudo apt-get install gcc g++ python python-dev mercurial bzr gdb valgrind gsl-bin libgsl0-dev libgsl0ldbl flex bison tcpdump sqlite sqlite3 libsqlite3-dev libxml2 libxml2-dev libgtk2.0-0 libgtk2.0- dev uncrustify doxygen graphviz imagemagick python-pygraphviz python-kiwi python-pygoocanvas libgoocanvas-dev python-pygccxml. Extract ns-allinone-3.25.tar.bz2 and run commands to build and configure NS-3 and check installation,

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    40 views1 page

    NS3 Installation Guide (Tested On Ubuntu 16.04)

    Uploaded by

    nangaayissi
    $ sudo apt-get update && sudo apt-get install gcc g++ python python-dev mercurial bzr gdb valgrind gsl-bin libgsl0-dev libgsl0ldbl flex bison tcpdump sqlite sqlite3 libsqlite3-dev libxml2 libxml2-dev libgtk2.0-0 libgtk2.0- dev uncrustify doxygen graphviz imagemagick python-pygraphviz python-kiwi python-pygoocanvas libgoocanvas-dev python-pygccxml. Extract ns-allinone-3.25.tar.bz2 and run commands to build and configure NS-3 and check installation,

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    NS3 Installation Guide (Tested on Ubuntu 16.

    04)

    • Open terminal and install necessary packages


    $ sudo apt-get update
    $ sudo apt-get install gcc g++ python python-dev mercurial bzr gdb valgrind gsl-bin libgsl0-dev
    libgsl0ldbl flex bison tcpdump sqlite sqlite3 libsqlite3-dev libxml2 libxml2-dev libgtk2.0-0 libgtk2.0-
    dev uncrustify doxygen graphviz imagemagick python-pygraphviz python-kiwi python-pygoocanvas
    libgoocanvas-dev python-pygccxml

    • Extract ns-allinone-3.25.tar.bz2
    • Open terminal go to ns-allinone-3.25 folder location and write command
    $ cd ns-allinone-3.25
    $ chmod +x build.py
    $ ./build.py --enable-examples --enable-tests

    • It will take time to run the command at the end you should see “Build finished successfully”
    $ cd ns-3.25
    $ ./waf -d debug --enable-examples --enable-tests configure
    $ ./waf

    • To check the installation run this command


    $ ./test.py

    • Now you should install NetAnim. run thesis commands,


    $ sudo apt-get install mercurial
    $ sudo apt-get install qt4-dev-tools

    • then
    $ cd netanim
    $ make clean
    $ qmake NetAnim.pro
    $ make

    • This should create an executable named "NetAnim" in the same directory. To start the
    application just type "./NetAnim"

    You might also like