Professional Documents
Culture Documents
MCQ Cs Exe Material Cost and Control
MCQ Cs Exe Material Cost and Control
Material
The term material refers to all commodities supplied to an undertaking. Materials may be direct or indirect.
Direct Material
Direct materials are those materials which can be conveniently identified with and can be directly allocated to a
particular product, job or process.
Examples of Basic Raw Material:
Timber in furniture, Cloth in garments, Milk and cream in ice cream, paper in Books, Gold/Silver in jwellery, Bricks and
Cements in Building.
Examples of Primary Packing Material:
Can for tinned food and drink, Bottles for water, wine and whisky, Plastic packing for Milk/Ghee/Oil, Bag for Cement
Indirect Material
Indirect materials are those materials which cannot be conveniently identified with and cannot directly allocate to a
particular product, job or process.
Examples of Indirect materials are:
Stores used for maintaining machines, stores used by service departments, material of small value which cannot be
conveniently identified with a particular product.
Inventory Control
Inventory control is the systematic control and regulation of purchase, storage and usage of material in such a way as to
maintain an even flow of production and at the same time avoiding excessive investment in the material.
Material Control involves the planning, organizing and controlling the procurement, storage and usage of materials so as
to achieve the objectives of efficiency and economy.
3. Which of the following is not an advantage of 6. Which of the following is not a technique of
inventory control inventory control
(a) Continuous supply (a) ABC Analysis
(b) Avoid wastage and losses (b) EOQ
(c) Huge investment (c) Stock Levels
(d) Proper records (d) Utilization of fixed assets
Answer Key:
1.(d) 2.(b) 3.(c) 4.(a) 5.(d) 6.(d)
ABC Analysis: ABC analysis is the technique of exercising selective control over inventory items. The technique is based
on assumption that a firm should not exercise the same degree of control on all items of inventory. It should rather keep
greater control over those items which are most costly as compared to those items which are less costly. According to this
approach, the inventory items are divided into three categories: A, B and C.
Category A may include more costly items, while category B may consist of less costly items and category C of the least
costly items. Thus ABC analysis concentrates on important items and, therefore, is also known as control by importance
and exceptions (CIE). This approach is known as proportional value analysis (PVA), since the items are classified in
importance of their relative value.
Inventory surveys in general have shown the following trends regarding the components of inventories
manufacturing organizations:
Category % of total value % of total quantity
A 70 10
B 25 35
C 5 55
Answer Key:
1.(b) 2.(a) 3.(d) 4.(a) 5.(a) 6.(c) 7.(d) 8.(b) 9.(d) 10.(a)
6
b. Carrying Costs
The term carrying costs refer to the costs incurred in maintaining a given level of inventory. These include
1. Cost of storage space
2. Cost of handling material
3. Cost of insurance
4. Cost of store staff
There is a positive relationship between order size and carrying cost.
Practice Questions
Q.4. A firm is able to obtain quantity discounts on its orders of material as follows:
Price Per Tonn (Rs.) Tonnes
6.00 Less than 250
5.90 250 and less than 800
5.80 800 and less than 2000
5.70 2000 and less than 4000
5.60 4000 and over
The annual demand for the material is 4000 tonnes. Stock holding costs are 20% of material cost per annum. The
delivery cost per order is Rs.6. You are required to calculate the best quantity to order.
7
Stock Levels
Stock Levels
Setting of various stock levels is one of the techniques of inventory control. The main purpose of setting various stock
levels is to avoid the situation of under stocking and over stocking. These levels are not permanent but need revision
according to the changes in the factors which determine these levels.
Reorder Level: It is the point at which if the material reaches, further supplies must be ordered. The re-order level is
fixed somewhere between the maximum and the minimum level in such a way that the quantity of materials represented
by the difference between the re-ordering level and the minimum level will sufficient to meet the demands of production
till such time as the order materializes and supplies are received.
Re-order Level = Maximum Usage X maximum Lead time
Minimum Stock Level: The minimum level is the lowest quantitative balance of materials in hand which must be
maintained at all times so that the assembly line may not be stopped on account of non availability of materials.
Minimum Level = Re-order level – (Average Usage X Average Lead Time)
Maximum Stock Level: The maximum level is the largest quantity of a particular material which should be kept
in the store at any one time. The fixation of maximum level is necessary to avoid unnecessary blocking up of capital in
inventories, losses on account of deterioration and obsolescence of materials, extra overheads and temptation of thefts.
Maximum Level = Re-order level + Re-order quantity – (Minimum Usage X Minimum Lead Time)
Q.1. From the following information, calculate (a) Reorder level, (b) Minimum Level, (c) Maximum Level, (d) Average
Level, (e) Danger Level.
Rate of Consumption: Min. 250 kg per week, Max. 750 kg per week, Normal 500 kg per week.
Re-order period: Min. 3 weeks, Max. 7 weeks, Normal 4 weeks, Emergency 2 weeks.
Re-order Quantity: 2000 Kg.
Q.3. A company manufactures 5000 units of a product per month. The cost of placing an order is Rs.100. The
purchase price of the raw material is Rs.10 per kg. The re-order period is 4 to 8 weeks. The consumption o f raw
material varies from 100 kg to 450 kg per week. The average consumption being 275 kg. The carrying costof
inventory is 20% per annum. You are required to calculate:
(i) Re-order quantity (ii) Re-order level (iii) Maximum Level (iv) Minimum level
(v) Average stock level
9
1. If the minimum stock level and average stock (d) Maximum stock level + half of minimum
level of raw material A are 4000 and 9000units stock level
respectively, Find out its re-order quantity.
(a) 10,000 Units 7. If Average and Maximum consumption is 275
(b) 14000 Units units and 525 units and Average and Maximum
(c) 6000 Units lead time is 4 and 8 days. what would be the
(d) None of these minimum stock level
(a) 3100 units
2. Reorder level is
(b) 4200 units
(a) Quantity to be ordered
(c) 1100 units
(b) Quantity to be in stock while placing an
(d) 5300 units
order
(c) Minimum quantity in stock 8. Which of the following is not true
(d) Maximum quantity in stock (a) Stock levels avoids overstocking
3. Maximum stock level (b) ROL and ROQ is same
(a) Maximum consumption X Maximum lead (c) ROQ and EOQ may be same
time (d) Stock level maintains stock for continuous
(b) Reorder level – (Minimum Consumption X production
Minimum lead time) 9. If Reorder level is 4000 units and reorder
(c) Minimum Consumption X Minimum Lead quantity is 15,000 units and minimum
Time consumption and minimum lead time is 400
(d) Reorder Level + Reorder Quantity – ( units and 3 weeks . The maximum stock level is
Minimum Consumption X Minimum lead (a) 1200 units
time) (b) 17,800 units
4. Which of the following is correct (c) 11,000 units
(a) Danger stock level is less than Reorder level (d) 15,000 units
(b) Danger stock level is higher than reorder
level 10. Stock levels is a technique of
(c) Danger stock level and reorder level is same (a) Inventory control
(d) None of these (b) Inventory investment
(c) Obsolescence
5. Which of the following statements is/are true (d) None of these
(a) Stock level supports overstocking
(b) Stock levels supports under stocking 11. Stock level technique is used to avoid
(c) Stock level avoids overstocking (a) Under stocking
(d) Stock level supports huge investment (b) Overstocking
(c) Both
6. Average stock level (d) None of these
(a) Half of reorder level and maximum level
(b) Minimum stock level + half of Reorder level 12. Stock levels are
(c) Minimum stock level + half of maximum (a) Permanent
stock level (b) Constant
(c) Variable
(d) Changes as per organizations requirements
Answer Key
1.(a) 2.(b) 3.(d) 4.(a) 5.(c) 6.(b) 7.(a) 8.(b) 9.(b) 10.(a) 11.(c) 12.(d)
Inventory Turnovers Ratios
Inventory Turnover Ratio is one of the techniques of inventory control. It expresses the relationship between the
cost of material consumed and the average stock held.
1. It indicates the speed with which the inventory is consumed. In general a high ratio indicates fast moving
stock and a low ratio indicates slow moving stock.
2. A too high ratio may be the result of a very low inventory levels which may results in frequent stock-outs and
thus the firm may incur high stock-outs.
3. A too low ratio may be the result in excessive inventory levels, slow moving or dormant or obsolete inventory
and thus the firm may incur high carrying costs.
Inventory Turnover Ratios: Inventory turnover ratio is also calculated to minimize the inventory on the basis of the
following formula.
Inventory Turnover = Cost of goods Consumed/sold during the period
Average inventory held during the period
Q.1. Calculate the material turnover ratio for material A and B and comment upon the results:
Material A Material B
Rs. Rs.
Opening Stock 10000 35000
Purchase during the year 76000 50000
Closing stock 6000 25000
Purchase Procedure
Step 1: Receipt of Purchase Requisition
Step 2: Selection of Supplier
Step 3: Preparation, Placement and follow up of Purchase order
Step 4: Receipt of material
Step 5: Inspection of material
Step 6: Return of Rejected material
Step 7: Checking and passing of purchase invoice for payment
Step 8: Making payment to supplier.
Purchase Requisition
Purchase requisition is a written document prepared by the department requiring material which is used to make
a formal request to the purchase department to purchase the materials specified therein.
Purchase requisition is received from:
a. The store keeper for all items in regular use.
b. The production department for specific items not regularly used and stored.
c. The production planning department for new production development.
d. The plant engineer for material required for special maintenance and capital expenditure projects.
e. The departmental heads for any material required his department
2. Issue Procedure
The following two documents are used for issue of materials to production departments:
(a) Material Requisition: It is a document which is used to authorize and record the issue of materials from
the stores. It is usually prepared by a foreman but in case of costly material or large quantity of materials, an
approval by some higher authority may be required.
Usually three copies of material requisition are prepared for store keeper, for Cost accounting department
and for the department indicating it.
Two copies of material requisition are sent to store keeper. Storekeeper makes the entries in the Bin card and
then issues materials to the person made requisitions and then send a copy af requisition after signature to
the Cost Accounting Department that fills up the rate and the amount column of the requisition and makes in
the entries in the store ledger.
(b) Bills of Material: Bill of Material is a list of standard quantities of all materials required for a particular job or
work order or a process. It is prepared by engineering or planning department in a standard form on receipt
of an order.
Usually four copies of bill of material are prepared One co;y for production department, second for stores
department, third for Cost Accounting Department and one copy is retained by engineering or planning
Department.
4. Inventory System
There are two inventory systems
1. Periodic Inventory System
Periodic inventory system is a system of ascertaining the quantity and value of inventory on the basis of an
actual physical count or measure or weight of all the inventory items on hand at the end of accounting
period. It usually requires closing down of normal functioning for stock taking. The cost of materials issued is
calculated as a residual figure (which may include cost of material lost also) as under
Cost of material Issued = Opening Inventory + Purchases – Closing Inventory
(a) Use of Perpetual Inventory records – Bin Card and Store Ledgers
(i) Bin Card: Bin card provides a continuous quantitative record of receipts, issues and balances of
each item of stores. Separate Bin cards are maintained for each items. It is filled up with the
physical moment of goods.
(ii) Store Ledger: Store Ledger provides continuous Quantitative-cum-value records of receipts,
issues and balances of each item of stores. It is filled up with the physical movement of goods
with the help of Goods Received Note, Material Issue Requisition, and Material Return Note.
Answer Key:
1.(b) 2.(b) 3.(d) 4.(b) 5.(b) 6.(b) 7.(d) 8.(b) 9.(b) 10.(b)
11.(b) 12.(c) 13.(a) 14.(b) 15.(b) 16.(c) 17.(a) 18.(a) 19.(b) 20.(b)
21.(c) 22.(c) 23.(b) 24.(d) 25.(a)