XM 18 PDF
XM 18 PDF
XM-18
Operation Instruction
The automatic multi-function incubator researched and produced by our company uses the
more popular microcomputer-based technology (using the latest micro-electronics technology and
new components), equiping with the imported digital temperature sensor and France moisture
sensitive capacitance humidity sensor, which makes this instrument miniaturization, intelligent,
high measurement accuracy. This incubator is stable and reliable, time-saving, labor-saving, and
easy-to-use. It is the ideal incubation equipment for propagation of poultry and rare birds and small
and medium-sized hatchery.
Working Condition:
1. Working Voltage: AC 160V -240V, 50HZ
2. Relative Humidity: less than 85% RH
3. Environment Temperature: -10°C – 60°C
Temperature and humidity settings instance: This method is very simple, as long as you set up
both points of temperature and humidity, others will generate automatically. For example, a
incubation control room needs that the temperature is 38 °C, humidity is 60% RH.
During normal working, press SET and lift your hand, a row of led will display on the lower
side of the controller. If you need to change the temperature value, press
to adjust, till to display the temperature 38 °C you required. And then press [OK]
and raise your hand, the led will display on the lower side of the controller. If you
need to change the humidity value, please press to adjust un till the
required humidity 60% RH shows. And then press the key [OK], the controller will
automatically calculate andfill the parameters of temperature and humidity, and finally
return to normal working state.
Arbitrary temperature and humidity settings example
(which may change and automatically generate interval, but generally do not use it) During
normal operation, press the key [SET] and don't raise your hand, and then press the key [▲]
untill display and then raise your hand, set up the following parameters:
Number of egg-turning:
Led display as shown in right figure: "F7" is the number of egg-turning, press the
key [OK] and then raise your hand to return to the normal working state.
Automatic egg-turning:
Turn eggs automatically in accordance with the set egg-turning interval and egg-turing time, turn
left -> interval -> turn right → interval → turn left ...... alternation of egg-turning. The number of
egg-turning will display on the parameter F7, and will be zero if the controller power is cut off. In
order to ensure normal egg-turing, please switch to the state of automatic egg-turing.
Manual egg-turning:
Press the key [▲] and do not lift your hand, the controller will enter into the state of manual egg-
turing after 2 seconds. You're your hand when it is adjusted to the desired location, the controller
will get into the state of automatic egg-turing.
The computer wil define automatically the direction of egg-turning:
Silencing function: when the controller give an alarm, press the key [▼] and lift your hand, to
remove the buzzer sound and alarm output, but then the alarm indicator lamp still lights up; press
the key [▼] again and raise your hand, to restore buzzer sound and alarm output control.
Factory Settings:
Reference temperature: 38.0 °C; reference humidity: 60% RH;
cycle of egg-turning: 90-minute; time of egg-turning: 180 seconds;
ventilation cycle: 120 minutes; ventilation time: 30 seconds;
egg-turning state: automatic egg-turning
Controller Wiring Diagram