Komatsu - Mining Division - PC7000-11
Komatsu - Mining Division - PC7000-11
Komatsu - Mining Division - PC7000-11
HYDRAULIC
EXCAVATOR
WELCOME 2
WE CREATE
YOUR FUTURE
The brand Komatsu is a worldwide synonym for high quality, achieved through continuous product
development, innovation and reliability. We strive to be the technology leader and to give a
promising future to our customers.
As a globally acting OEM of ultra-large hydraulic excavators, you can expect challenging
assignments allowing you to plan and develop your daily business actively. That is why we are
driven by the constant pursuit of increasing the efficiency of your mine.
TABLE OF CONTENTS 3
04 INTRODUCTION
WE PROVIDE
06 SIMPLIFIED SYSTEM
SOLUTIONS
08 KOMTRAX PLUS 2
10 KOMVISION
12 PAYLOAD METER
14 OPERATOR‘S CAP
PC7000-11 18 SPECIFICATIONS
RELIABILITY IMPROVEMENTS
IMPROVED SAFETY
PAYLOAD OPTIMIZATION
Real Benefits
OPERATION MONITORING
WE SIMPLIFIED THE
EASIER MAINTENACE
The simplified system is a result of engineering power. Saving of electrical parts as well as no need
for additional node boxes and the release of new controller generation.
Added to this, we worked on a well structured, clean and lean electrical switch cabinet. The relays
and connectors are placed in a separated sealed switch cabinet. We enhanced the extended
machine settings to adjust via the Komtrax Plus monitor in the cabin. We developed new sensors
for measuring data. Thus, we can show every error on the machine for real-time maintenance.
Through our new developments, customers have a simplified troubleshooting, higher availability
and lower cost per tone. This is simplicity.
SIMPLIFIED SYSTEM 7
SIMPLIFIED
EVERYWHERE
Our goal was to reduce and simplify the electrical system. As a result of it, we reduced the random
harnesses. Using a redundancy CAN-BUS system for a high level of reliability and a high safety
standard due to the redundancy control lines. Extended machine settings can be adjusted via the
Komtrax Plus monitor in the cabin. The PC7000-11 provides a tidied up, simplified system which helps
the customer to have an easier access to the harnesses and a better troubleshooting support.
600
400
200
0
Controller Relay Circuit Breaker
THE EFFICIENT
MONITORING
SYSTEM
KOMTRAX PLUS 2
CONSISTS OF
ABUSE DETECTION SYSTEM
Troubleshooting
- Komatsu built controller
- Availability improvement
Bulldozing with bucket Hitting tracks
PLM (Optional) alert warning warning
- Truck shovel optimization
- Production improvements
KOMTRAX PLUS 2
IS A BREAKTHROUGH TO
THE
PROTECTION
SYSTEM
Safety is a big point for every customer of us. KomVision helps to reduce the accidents in the pit and
it provides a better feeling for the operators.
KomVision is one of our key features regarding the safety. It helps to protect the operator from any
danger. Several cameras on and around the excavator are mounted to grant the most possible
amount of safety.
Marked areas around the excavators highlighted safety area, working area and the dumping area.
The operator recognizes any movement of foreign objects in his working area. He is able to react.
All units of the seven implemented cameras are available for a single view to a detailed image of
the surrounding.
... TO HAVE A
BIRDS-EYE-VIEW
OF THE EXCAVATOR
PAYLOAD METER (PLM) 12
6 PASSES
(7%)
6 PASSES 5 PASSES
(50%) (50%)
5 PASSES (93%)
TRUCK DATA
OPERATOR‘S CAB 14
COMFORTABLE CABIN
The large and comfortable cab is mounted
on 18 viscous damping pads and is sound
insulated. The cabin has automatic
climate control and is pressurised.
The operator’s seat is air-suspended,
electrically heated and has a two-point
seatbelt and offers multiple adjustments.
The second seat is also equipped with a
seat belt. Low-effort joystick controls are
electrohydraulic with foot pedals for front
shovel clam, crawler and swing brake.
OPERATOR CUSTOMIZED
Full instrumentation, KOMTRAX Plus
INTERIOR VIEW OF THE CABIN
and an AM/FM radio with MP3 ready
CD player with AUX in is installed. The
windshield wiper has two speeds and
intermittent operation. Amenities include
a refrigerator and storage cabinets.
Heated mirrors are adjustable from inside
the cab. External metal sun blinds on
the cab side window and internal roller
blinds on all windows are standard. The
left-hand window is an emergency exit.
All windows are tinted parsol green. The
cab has a special penetration proof front
window (acc. DIN EN1063, resistance
classification BR2-S) to increase the safety
level of the operator. There is a walkway
around the cabin.
THRILLED BY THE
EASY OPERATION
SAFETY FEATURES 16
ACCESS SYSTEM
The access system has been newly designed
to grant the best safety conditions for the
operator. The access and egress system is
designed to meet the highest standards in
comfort and safety. The 45° stairway system
allows the operator and the maintenance
staff comfortable and safe access to the
machinery house level and cab level. The
stairway system with steps made of anti-
slip gratings and an additional anti-slip
edge are the main features.
EMERGENCY EXIT
45° ACCESS STAIRWAY SYSTEM
An unique emergency egress system allows
the operator to escape from the machine
in case of an emergency event. The newly
developed two solid flip-down emergency
ladders will enable a way out from each
side of the excavator. The emergency
hatch which enables the escape from the
machinery house up to the roof is also a
part of the emergency egress system. It is
unique in our excavator class and makes
our machines safer. All this results in an
unrivalled safety for the operator and the
maintenance staff.
MAINTENANCE
Wide walkways to the regular service EMERGENCY RESCUE HATCH
points, proper platforms equipped with
handrail and kickboards as well as easy
access to all service points provide a high
safety standard for maintenance. When
we simplified the maintenance, one of the
primary focuses was the accessibility and
safety during servicing and the accessibility
for maintenance activities. The working
space in the machinery house had been
extended, the first stage fuel filter had been
removed into the fuel tank structure and is
to reach from the machinery house easy.
SIMPLIFIED MAINTENANCE
WE HAVE THE
RESPONSIBILITY TO
A GROUNDBREAKING EXCAVATOR
The PC7000 is available with the latest diesel technology as -11 and with electric drive as -6. The
PC7000-11 offers two Komatsu SSDA16V159E-2 Tier 2 engines which are rated 2 x 1250 kW 1,675 HP
@ 1,800 rpm and an electronic engine management.
The features of the engine are electronic engine management, low engine emission levels, optional
cost savings engine oil management system called „Centinel“, engine reserve oil supply and
eliminator oil filter system.
The operating weight ranges from 676 - 694 tons (1,490,600 - 1,530,300 lbs). The shovel capacity is
about 36 m³ (47 yd³) SAE 2:1 heaped. The backhoe capacity is about 36 m³ (47 yd³) SAE 1:1 heaped.
The PC7000 matches from 200 to 320 U.S. ton trucks for the best productivity.
SPECIFICATIONS - PC7000 20
MATCHES:
The right truck match matters when having certain production goals. Komatsu helps you to determine
the shovel for your truck.
ATTACHMENTS:
Operating weight including 11,000 mm (36’1’’) boom, 5,100 mm (16’9’’) stick, 36 m³ (47 yd3) backhoe bucket, operator,
lubricant, coolant, 1/3 fuel and standard equipment.
Type Shoe width Operating weight Ground pressure
Backhoe 1,500 mm (59“) 682 t (671,090 lb) 25.3 N/cm² (36.6 psi)
Backhoe 1,900 mm (75“) 692 t (680,930 lb) 20.3 N/cm² (29.4 psi)
Operating weight including 8,000 mm (26’3’’) boom, 5,500 mm (18’1’’) stick, 36 m³ (47 yd3) shovel bucket, operator,
lubricant, coolant, 1/3 fuel and standard equipment.
SERVICE CAPACITIES
TRAVEL AND BRAKE SYSTEMS
Hydraulic oil tank 4,750 ltr / 1,255 U.S. gal
Gradeability Up to 50% Hydraulic system 9,500 ltr / 2,510 U.S. gal
Travel speed (maximum) 2.5 km/h 1.55 mph Fuel 13,033 ltr / 3,443 U.S. gal
Service brake Hydraulic brake Engine coolant 2 x 440 ltr / 2 x 116 U.S. gal
Parking brake Multiple-disc Engine oil 2 x 236 ltr / 2 x 62 U.S. gal
Reserve engine oil
2 x 665 ltr / 2 x 176 U.S. gal
make up tank
SWING SYSTEM
Lubrication system (total) 900 ltr / 238 U.S. gal
Hydraulic motors and drives 3
Swing brake, service Hydraulic brake COMFORT AND ENVIRONMENT
Swing brake, parking Multiple-disc
Swing ring teeth External Vibrations levels
Swing speed 3.1 rpm Hand-lever (ISO 5349-1) lower than 2.5m/s²
Whole body vibration and
below 0.5m/s²
shock (ISO 2631-1)
ELECTRIC SYSTEM (ELECTRIC) Contains fluorinated greenhouse gas HFC-134a (GWP 1430)
PC7000-11 D Quantity of gas 5.5-10,0 kg, CO2 equivalent 7.86-14.30t
System 24 V
Batteries (series/parallel) 4 x 12 V PC7000-6 E Quantity of gas 7.9-12,4 kg, CO2 equivalent 11.29-17.73t
Battery charger 3 x 100 A
Standard working lights 16 LED lights
Throughout the platform incl.
Standard service lights
emergency egresses and stairways
COMPANY 22
110 YEARS
OF VALUES AND
EXPERIENCE
Komatsu Germany GmbH is a proud member of the Komatsu Group, one of the largest manufacturers
of mining and construction equipment worldwide. In Düsseldorf we are specialized in hydraulic
mining excavators.
Today we manufacture five types of hydraulic excavators of between 254 - 773 tons and bucket
volumes up to 42 cubic meters in either front shovel or backhoe configuration. Since many of our
excavators are used in the most inhospitable regions in the world, with extreme temperatures and
under the harshest conditions, we are above all focused on providing quality and reliability.
Nearly 90% of the units we sold in the last 35 years have been supplied to repeat customers.
That fact shows our superior quality in manufacturing and our superior service. The oldest currently
operating unit with the most working hours is an excavator of the former PC4000 type, which
has worked nearly 156,000 hours, that means the equivalent of more than 25 years of continuous
service 24/7/365.
COMPANY 23
WE ARE
DÜSSELDORF
Since the 1930s we have been a production plant in Düsseldorf Benrath. Since then, we have
continuously set milestones, year after year. Thanks to the excellent infrastructure and the proximity
to the port and airport, we can ship every item in record time. We have been proud to be a part
of Düsseldorf for almost 80 years. Since 1980 we have manufactured more than 1,050 excavators,
more than 70% of which are still in operation.
In 2017 we opened the „Technical Center“ office building. The Technical Center is a landmark in
Düsseldorf Benrath and includes attractive leisure programs and an open-space working area. The
great atmosphere results in unrivaled customer service.
We train apprentices, offer further education to our trainees and our employees to develop that
knowledge and to keep up to date with the latest state-of-the-art technologies. We live the
legendary „SLQDC“ philosophy through all processes and departments to achieve to build the best
excavator for our customers‘ mine.
Please note that the features stated in this brochure are maybe not available for all products.
Materials and specifications are subject to change without notice.
KOMATSU GERMANY
MINING DIVISION
KOMATSU-MINING.DE