Calculation No.

21-05-200-001
CALCULATION COVER SHEET Prel. Final Void Revision

Discipline
CLIENT Process
Project No.
PROJECT TITLE

No. of Sheets

SUBJECT/FEATURE Pressure drop

CALCULATION OBJECTIVE
Pressure drop calculation for different cases.

RESULTS/CONCLUSIONS

ASSUMPTIONS/OPEN ITEMS

DESIGN CRITERIA/DESIGN BASIS (With Reference to Source of Data)

REFERENCES/SOURCE DOCUMENTS
1) EG-21-011 Piping Hydraulics – Pressure Drop

FOR CALCULATIONS GENERATED BY COMPUTER PROGRAMS

Verified on Master Software List

Computer Program Name CalcDP1 Rev. 2.0b

REV. REVISION REASON PREP. DATE CHECK DATE APPROV. BY DATE

NO. BY BY

AECOM ENGINEERS & CONSTRUCTORS

F-PEP356-01 (MM)/ May 18 ROMANIA S.R.L. Page 1 of 1
 PRESSURE LOSS SUMMARY
CalcDP v2.0b
CLIENT NAME:
PROJECT DETAILS: Single Phases Test Cases
SIMULATION:
FLOWSHEET:

STREAM DESCRIPTION
ANSI Piping Class (Flange Rating) C-400# A-150# B-300# B-300# B-300# D-600#
Line Number
P&ID Drawing No.
From
TERMINAL POINTS
To
Design Pressure psig 810 55 115 115 215 1085
INLET

Design Temperature F 150 150 740 740 440 150

Pressure psig 735.3 25.3 90.0 90.0 185.3 985.3
Temperature F 60. 95. 681. 681. 382. 60.
Flowrate Design Multiplier 1.0 1.0 1.0 1.0 1.0 1.0
Atmos Press 14.696 psia
DP METHOD L-I L-H G-U G-F G-I G-W
Multi-Phase Flow Regime Mapping
VAPOR PROPERTIES
Normal Mass Flow Rate lb/hr 12,000 12,000 60,000 414,122
Normal Volumetric Flow Rate at Inlet ft3/hr
Normal Standard Gas Flow Rate ft3/day
Design Mass Flow Rate lb/hr 0 0 12,000 12,000 60,000 414,122
Design Volumetric Flow Rate at Inlet ft3/hr #VALUE! #VALUE! 76,923 76,923 137,300 104,339
Design Standard Gas Flow Rate ft3/day #VALUE! #VALUE! 5,993,919 5,993,919 30,333,922 200,346,531
Molecular Weight 18.234 18.234 18.015 18.826
Compressibility Factor Z
Fluid Density@T,P lb/ft3 0.156 0.156 0.437 3.969
Viscosity cP 0.025 0.025 0.020 0.018
Ideal Gas Cp/(Cp-R)
LIQUID PROPERTIES
Normal Mass Flow Rate lb/hr 137,143 7,463,585
Normal Volumetric Flow Rate gal/min
Design Mass Flow Rate lb/hr 137,143 7,463,585 0 0 0 0
Design Volumetric Flow Rate gal/min 292 15,000 #VALUE! #VALUE! #VALUE! #VALUE!
Fluid Density@T,P lb/ft3 58.623 62.035
Fluid Viscosity cP 1504.000 0.700
Surface Tension dyne/cm
PIPE SELECTION
Nominal Pipe Size in 12" 20" 6" 6" 8" 20"
Pipe Material CS CS CS CS CS CS
Pipe Schedule 80 40 40 40 80 STD
Pipe ID in 11.374 18.812 6.065 6.065 7.625 19.250
Pipe Roughness in 0.0018 0.0018 0.0018 0.0018 0.0018 0.0018
FRICTION CALCULATIONS
Friction Pressure Drop (Clean/New) psi/100ft 0.72 1.62 0.65 0.61 1.58 0.08
Acceleration Pressure Drop psi/100ft 0.00 0.00 0.00 0.00 0.00 0.00
Pipe Friction Loss Multiplier 1.0 1.0 1.0 1.0 1.0 1.0
Friction+Accel Pressure Drop (Design) psi/100ft 0.72 1.62 0.65 0.61 1.58 0.08
Fluid Velocity ft/s 0.92 17.31 106.50 106.50 120.27 14.34
Erosional Velocity ft/s 16.33 15.87 316.48 316.48 189.09 62.74
Friction Factor Moody 1.2639 0.0126 0.0172 0.0162 0.0146 0.0143
Reynolds Number 51 3,579,762 499,862 499,862 2,484,969 7,548,570

Program Revision 2.0b: Issued 05-Mar-10 CONFIDENTIAL Print Date: 6/6/2019

 PRESSURE LOSS SUMMARY
CalcDP v2.0b
CLIENT NAME:
PROJECT DETAILS: Single Phases Test Cases
SIMULATION:
FLOWSHEET:

STREAM DESCRIPTION
Hazen- Weymouth
Liquid Single Unwinn for Fritzche for
Flow Regime Williams Water Gas Isothermal Natural Gas
Phase Steam Flow Steam Flow
Flow Flow
ELEVATION
Beginning of segment ft 0 0 0 0 0 0
Change in Elevation ft 0 0 0 0 0 0
Pipe Incline Deg 0 0 0 0 0 0
Calculated Change in Elevation ft 0 0 0 0 0 0
Calculated Pipe Incline Deg 0 0 0 0 0 0
End of Segment ft 0 0 0 0 0 0
STRAIGHT PIPE LENGTH AND QUANTITY OF FITTINGS (addtl non-standard options avail in hidden rows)
Straight Length Pipe ft 52800.0 200.0 100.0 100.0 100.0 422400.0
90° Short Radius (R/D=1), screwed
Elbows

Short Radius (R/D=1), flgd/welded 2 4

Standard (R/D=1.5), all types
45° Short Radius (R/D=1), all types
Standard (R/D=1.5), all types 2
As Standard, screwed
Elbow Long-radius, screwed
Tee

Standard, flanged or welded 2

Flow Thru Screwed
Flanged or Welded
Full line size, Beta = 1.0
Gate, Ball
Reduced trim, Beta = 0.9
or Plug
Valves

Reduced trim, Beta = 0.8

Globe Standard
Butterfly Butterfly Valve
Check Swing 1
Entrance
Other Losses

Exit
Swage from Diameter (entrance) in
Swage to Diameter (exit) in
Orifice Diameter in
Other Flow Resistance, K
User Supplied Pressure Loss psi
PRESSURE PROFILE
Upstream Pressure psig 735.3 25.3 90.0 90.0 185.3 985.3
Static Head Pressure Drop psi 0.0 0.0 0.0 0.0 0.0 0.0
Friction Pressure Drop (Design) psi 377.8 3.2 0.6 0.6 1.6 332.4
Fittings Pressure Drop (K Values) psi 0.3 8.7 0.0 0.0 0.0 0.0
Additional Pressure Drop psi 0.0 0.0 0.0 0.0 0.0 0.0
Total Pressure Drop psi 378.1 11.9 0.6 0.6 1.6 332.4
Downstream Pressure psig 357.2 13.4 89.4 89.4 183.7 652.9
EQUIVALENT LENGTH SUMMARY
Elbows and Tees ft 52.0 339.8 0.0 0.0 0.0 0.0
Valves ft 0.0 196.0 0.0 0.0 0.0 0.0
Entrance ft 0.0 0.0 0.0 0.0 0.0 0.0
Exit ft 0.0 0.0 0.0 0.0 0.0 0.0
Swage at Entrance ft 0.0 0.0 0.0 0.0 0.0 0.0

Program Revision 2.0b: Issued 05-Mar-10 CONFIDENTIAL Print Date: 6/6/2019

 PRESSURE LOSS SUMMARY
CalcDP v2.0b
CLIENT NAME:
PROJECT DETAILS: Single Phases Test Cases
SIMULATION:
FLOWSHEET:

STREAM DESCRIPTION
Swage at Exit ft 0.0 0.0 0.0 0.0 0.0 0.0
Orifice ft 0.0 0.0 0.0 0.0 0.0 0.0
Other ft 0.0 0.0 0.0 0.0 0.0 0.0
Pipe Length ft 52800.0 200.0 100.0 100.0 100.0 422400.0
WARNING / INFORMATIONAL FLAGS
Choked Condition! , Critical Length is… ft

Calculation Warnings / Errors

Flow Regime Map Flow Regime Map Flow Regime Map Flow Regime Map Flow Regime Map Flow Regime Map
Multi-Phase Flow Regime Error Flags Appropriate for Appropriate for Appropriate for Appropriate for Appropriate for Appropriate for
Two-Phase flow Two-Phase flow Two-Phase flow Two-Phase flow Two-Phase flow Two-Phase flow
Chosen Flow Chosen Flow Chosen Flow Chosen Flow Chosen Flow Chosen Flow
Regime Regime Regime Regime Regime Regime
Multi-Phase Flow Regime Error Flags appropriate for appropriate for appropriate for appropriate for appropriate for appropriate for
vertical & vertical & vertical & vertical & vertical & vertical &
horizontal pipe horizontal pipe horizontal pipe horizontal pipe horizontal pipe horizontal pipe
Based on Design Temperature and Pressure:
Required Minimum Flange Rating C A B B B D
Typical pipe schedule #NoSch! STD STD STD XS 80
User Selected Flange Rating MAWP psig 985.0 285.0 530.0 530.0 635.0 1480.0
User Selected Pipe MAWP psig 2210.5 1201.5 1389.3 1389.3 2359.9 751.9

Pressure Class Error Flags

ANSI Flange Rating Error Flags

Pipe Schedule Error Flags #Err_Pipe_Sch #Err_Pipe_Sch #Err_Pipe_Sch #Err_Pipe_Sch

HIDDEN CELLS BELOW
Calculated Values
Fittings, Orifice, Entrance, Exit: Segment K1 2600 6300 0 0 0 0
Segment K¥ 0.8 4.1 0 0 0 0
K1/Re + K¥(1 + 1/D) 52.22 4.32 0.00 0.00 0.00 0.00
Swage at entrance 0.00 0.00 0.00 0.00 0.00 0.00
Swage at end 0.00 0.00 0.00 0.00 0.00 0.00
K orifice 0.00 0.00 0.00 0.00 0.00 0.00
K clean/new straight pipe 70409.25 1.61 3.40 3.20 2.32 3773.59
Friction & Fittings -DP per length psi/100ft 0.72 1.62 0.65 0.61 1.58 0.08
Outlet Pressure psia 371.9 28.1 104.0 104.1 198.4 667.6
Flowing Density lb/ft3 58.623 62.035 0.156 0.156 0.437 3.969
Liquid Superficial Velocity ft/sec 0.921 17.315
Vapor Superficial Velocity ft/sec 106.504 106.504 120.271 14.340
Mixed Superficial Velocity ft/sec 0.921 17.315 106.504 106.504 120.271 14.340
Reynolds Number 51 3,579,762 499,862 499,862 2,484,969 7,548,570
Friction Factor 1.2639 0.0126 0.0172 0.0162 0.0146 0.0143
Liq Holdup (no units) or Crit. Length ft 6129.732
Equivalent Length ft 52839.2 736.0
Hazen- 100.0 100.0 100.0 422400.0
Weymouth
Liquid Single Williams Water Unwinn for Fritzche for Natural Gas
Flow Regime Phase Flow Steam Flow Steam Flow Gas Isothermal Flow

Program Revision 2.0b: Issued 05-Mar-10 CONFIDENTIAL Print Date: 6/6/2019

 PRESSURE LOSS SUMMARY
CalcDP v2.0b
CLIENT NAME:
PROJECT DETAILS: Single Phases Test Cases
SIMULATION:
FLOWSHEET:

STREAM DESCRIPTION

Errors?

Acceleration -ΔP per length psi/100ft 0.00 0.00 0.00 0.00 0.00 0.00
Sonic Velocity ft/s 0.00
Liquid Froude Number (Single Phase) 0.17 2.44 #N/A #N/A #N/A #N/A
Gas Froude Number (Multi Phase) #N/A #N/A #N/A #N/A #N/A #N/A
Mixed Phase Froude Number #N/A #N/A #N/A #N/A #N/A #N/A
Erosional Velocity ft/s 16.33 15.87 316.48 316.48 189.09 62.74
Velocity Head psi 0.0 2.0 0.2 0.2 0.7 0.1
Static Head -DP psi 0.000 0.000 0.000 0.000 0.000 0.000
Friction -DP (clean/new) psi 377.831 3.235 0.650 0.612 1.582 332.391
Fittings -DP (K Values) psi 0.280 8.670 0.000 0.000 0.000 0.000
Static fluid eq. pipe length ft 0 0 0 0 0 0
Pipe length (clean/new) ft 52800.0 200.0 100.0 100.0 100.0 422400.0
Fittings eq. pipe length (K Values) ft 39.2 536.0 0.0 0.0 0.0 0.0
Velocity Fluid Head ft 0.01 4.66 176.28 176.28 224.79 3.20
Static Fluid Head ft 0.00 0.00 0.00 0.00 0.00 0.00
Friction Fluid Head (clean/new) ft 928.10 7.51 599.79 564.73 521.24 12059.52
Fittings Fluid Head (K Values) ft 0.69 20.13 0.00 0.00 0.00 0.00

Program Revision 2.0b: Issued 05-Mar-10 CONFIDENTIAL Print Date: 6/6/2019

 PRESSURE LOSS SUMMARY
CalcDP v2.0b
CLIENT NAME:
PROJECT DETAILS: Multi Phase Test Cases
SIMULATION:
FLOWSHEET:

STREAM DESCRIPTION
ANSI Piping Class (Flange Rating) D-600# A-150#
Line Number
P&ID Drawing No.
From
TERMINAL POINTS
To
Design Pressure psig 1200 85
INLET

Design Temperature F 150 150

Pressure psig 1096.3 55.6
Temperature F 0. 0.
Flowrate Design Multiplier 1.0 1.0 1.0 1.0 1.0 1.0
Atmos Press 14.696 psia
DP METHOD M-BB M-D
Multi-Phase Flow Regime Mapping TD TD
VAPOR PROPERTIES
Normal Mass Flow Rate lb/hr 798,000 7,980
Normal Volumetric Flow Rate at Inlet ft3/hr
Normal Standard Gas Flow Rate ft3/day
Design Mass Flow Rate lb/hr 798,000 7,980 0 0 0 0
Design Volumetric Flow Rate at Inlet ft3/hr 1,669,456 16,695 #VALUE! #VALUE! #VALUE! #VALUE!
Design Standard Gas Flow Rate ft3/day #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE!
Molecular Weight
Compressibility Factor Z
Fluid Density@T,P lb/ft3 0.478 0.478
Viscosity cP 0.010 0.010
Ideal Gas Cp/(Cp-R)
LIQUID PROPERTIES
Normal Mass Flow Rate lb/hr 144,431 144,431
Normal Volumetric Flow Rate gal/min
Design Mass Flow Rate lb/hr 144,431 144,431 0 0 0 0
Design Volumetric Flow Rate gal/min 267 267 #VALUE! #VALUE! #VALUE! #VALUE!
Fluid Density@T,P lb/ft3 67.472 67.472
Fluid Viscosity cP 1.643 1.643
Surface Tension dyne/cm 40.6 40.6
PIPE SELECTION
Nominal Pipe Size in 36" 18"
Pipe Material CS CS
Pipe Schedule OTHER OTHER
Pipe ID in 36.000 18.000 0.000 0.000 0.000 0.000
Pipe Roughness in
FRICTION CALCULATIONS
Friction Pressure Drop (Clean/New) psi/100ft 0.11 0.01 #VALUE! #VALUE! #VALUE! #VALUE!
Acceleration Pressure Drop psi/100ft 0.00 0.00 #VALUE! #VALUE! #VALUE! #VALUE!
Pipe Friction Loss Multiplier 1.0 1.0 1.0 1.0 1.0 1.0
Friction+Accel Pressure Drop (Design) psi/100ft 0.11 0.01 #VALUE! #VALUE! #VALUE! #VALUE!
Fluid Velocity ft/s 65.69 2.96 #VALUE! #VALUE! #VALUE! #VALUE!
Erosional Velocity ft/s #VALUE! #VALUE! #VALUE! #VALUE! #VALUE! #VALUE!
Friction Factor Moody 0.0129 0.0423 #VALUE! #VALUE! #VALUE! #VALUE!
Reynolds Number 13,673,200 273,395 #VALUE! #VALUE! #VALUE! #VALUE!

Program Revision 2.0b: Issued 05-Mar-10 CONFIDENTIAL Print Date: 6/6/2019

 PRESSURE LOSS SUMMARY
CalcDP v2.0b
CLIENT NAME:
PROJECT DETAILS: Multi Phase Test Cases
SIMULATION:
FLOWSHEET:

STREAM DESCRIPTION

STRATIFIED STRATIFIED
Flow Regime #VALUE! #VALUE! #VALUE! #VALUE!
WAVY SMOOTH

ELEVATION
Beginning of segment ft 0 0 0 0 0 0
Change in Elevation ft 0 0 0 0 0 0
Pipe Incline Deg 0 0 0 0 0 0
Calculated Change in Elevation ft 0 0 0 0 0 0
Calculated Pipe Incline Deg 0 0 0 0 0 0
End of Segment ft 0 0 0 0 0 0
STRAIGHT PIPE LENGTH AND QUANTITY OF FITTINGS (addtl non-standard options avail in hidden rows)
Straight Length Pipe ft 100.0 100.0 100.0 100.0 100.0 100.0
90° Short Radius (R/D=1), screwed
Elbows

Short Radius (R/D=1), flgd/welded

Standard (R/D=1.5), all types
45° Short Radius (R/D=1), all types
Standard (R/D=1.5), all types
As Standard, screwed
Elbow Long-radius, screwed
Tee

Standard, flanged or welded

Flow Thru Screwed
Flanged or Welded
Full line size, Beta = 1.0
Gate, Ball
Reduced trim, Beta = 0.9
or Plug
Valves

Reduced trim, Beta = 0.8

Globe Standard
Butterfly Butterfly Valve
Check Swing
Entrance
Other Losses

Exit
Swage from Diameter (entrance) in
Swage to Diameter (exit) in
Orifice Diameter in
Other Flow Resistance, K
User Supplied Pressure Loss psi
PRESSURE PROFILE
Upstream Pressure psig 1096.3 55.6 0.0
Static Head Pressure Drop psi 0.0 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Friction Pressure Drop (Design) psi 0.1 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Fittings Pressure Drop (K Values) psi 0.0 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Additional Pressure Drop psi 0.0 0.0 0.0 0.0 0.0 0.0
Total Pressure Drop psi 0.1 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Downstream Pressure psig 1096.2 55.6 #VALUE! #VALUE! #VALUE! #VALUE!
EQUIVALENT LENGTH SUMMARY
Elbows and Tees ft 0.0 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Valves ft 0.0 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Entrance ft 0.0 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Exit ft 0.0 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Swage at Entrance ft 0.0 0.0 #VALUE! #VALUE! #VALUE! #VALUE!

Program Revision 2.0b: Issued 05-Mar-10 CONFIDENTIAL Print Date: 6/6/2019

 PRESSURE LOSS SUMMARY
CalcDP v2.0b
CLIENT NAME:
PROJECT DETAILS: Multi Phase Test Cases
SIMULATION:
FLOWSHEET:

STREAM DESCRIPTION
Swage at Exit ft 0.0 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Orifice ft 0.0 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Other ft 0.0 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Pipe Length ft 100.0 100.0 100.0 100.0 100.0 100.0
WARNING / INFORMATIONAL FLAGS
Choked Condition! , Critical Length is… ft #VALUE! #VALUE! #VALUE! #VALUE!

Calculation Warnings / Errors #VALUE! #VALUE! #VALUE! #VALUE!

Flow Regime Map Flow Regime Map Flow Regime Map Flow Regime Map Flow Regime Map Flow Regime Map
Multi-Phase Flow Regime Error Flags Appropriate for Appropriate for Appropriate for Appropriate for Appropriate for Appropriate for
Two-Phase flow Two-Phase flow Two-Phase flow Two-Phase flow Two-Phase flow Two-Phase flow
Chosen Flow Chosen Flow Chosen Flow Chosen Flow Chosen Flow Chosen Flow
Regime Regime Regime Regime Regime Regime
Multi-Phase Flow Regime Error Flags appropriate for appropriate for appropriate for appropriate for appropriate for appropriate for
vertical & vertical & vertical & vertical & vertical & vertical &
horizontal pipe horizontal pipe horizontal pipe horizontal pipe horizontal pipe horizontal pipe
Based on Design Temperature and Pressure:
Required Minimum Flange Rating D A No Flg Data No Flg Data No Flg Data No Flg Data
Typical pipe schedule #NoSch! STD #N/A #N/A #N/A #N/A
User Selected Flange Rating MAWP psig 1480.0 285.0 #VALUE! #VALUE! #VALUE! #VALUE!
User Selected Pipe MAWP psig No MAWP Data No MAWP Data #VALUE! #VALUE! #VALUE! #VALUE!

Pressure Class Error Flags #VALUE! #VALUE! #VALUE! #VALUE!

ANSI Flange Rating Error Flags

Pipe Schedule Error Flags #Err_Pipe_Sch #VALUE! #VALUE! #VALUE! #VALUE!

HIDDEN CELLS BELOW
Calculated Values
Fittings, Orifice, Entrance, Exit: Segment K1 0 0 0 0 0 0
Segment K¥ 0 0 0 0 0 0
K1/Re + K¥(1 + 1/D) 0.00 0.00 #VALUE! #VALUE! #VALUE! #VALUE!
Swage at entrance 0.00 0.00 0.00 0.00 0.00 0.00
Swage at end 0.00 0.00 0.00 0.00 0.00 0.00
K orifice 0.00 0.00 #VALUE! #VALUE! #VALUE! #VALUE!
K clean/new straight pipe 0.15 0.44 #VALUE! #VALUE! #VALUE! #VALUE!
Friction & Fittings -DP per length psi/100ft 0.11 0.01 #VALUE! #VALUE! #VALUE! #VALUE!
Outlet Pressure psia 1110.9 70.3 #VALUE! #VALUE! #VALUE! #VALUE!
Flowing Density lb/ft3 1.648 21.457 #VALUE! #VALUE! #VALUE! #VALUE!
Liquid Superficial Velocity ft/sec 0.084 0.336 #VALUE! #VALUE! #VALUE! #VALUE!
Vapor Superficial Velocity ft/sec 65.605 2.624 #VALUE! #VALUE! #VALUE! #VALUE!
Mixed Superficial Velocity ft/sec 65.690 2.961 #VALUE! #VALUE! #VALUE! #VALUE!
Reynolds Number 13,673,200 273,395 #VALUE! #VALUE! #VALUE! #VALUE!
Friction Factor 0.0129 0.0423 #VALUE! #VALUE! #VALUE! #VALUE!
Liq Holdup (no units) or Crit. Length ft 0.017 0.313 #VALUE! #VALUE! #VALUE! #VALUE!
Equivalent Length ft 100.0 100.0 #VALUE! #VALUE! #VALUE! #VALUE!
STRATIFIED STRATIFIED
Flow Regime WAVY SMOOTH #VALUE! #VALUE! #VALUE! #VALUE!

Program Revision 2.0b: Issued 05-Mar-10 CONFIDENTIAL Print Date: 6/6/2019

 PRESSURE LOSS SUMMARY
CalcDP v2.0b
CLIENT NAME:
PROJECT DETAILS: Multi Phase Test Cases
SIMULATION:
FLOWSHEET:

STREAM DESCRIPTION

Errors? #VALUE! #VALUE! #VALUE! #VALUE!

Acceleration -ΔP per length psi/100ft 0.00 0.00 #VALUE! #VALUE! #VALUE! #VALUE!
Sonic Velocity ft/s #VALUE! #VALUE! #VALUE! #VALUE!
Liquid Froude Number (Single Phase) #N/A #N/A #N/A #N/A #N/A #N/A
Gas Froude Number (Multi Phase) 0.56 0.03 #N/A #N/A #N/A #N/A
Mixed Phase Froude Number 6.69 0.43 #N/A #N/A #N/A #N/A
Erosional Velocity ft/s #DIV/0! #DIV/0! #N/A #N/A #N/A #N/A
Velocity Head psi 0.8 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Static Head -DP psi 0.000 0.000 #VALUE! #VALUE! #VALUE! #VALUE!
Friction -DP (clean/new) psi 0.113 0.009 #VALUE! #VALUE! #VALUE! #VALUE!
Fittings -DP (K Values) psi 0.000 0.000 #VALUE! #VALUE! #VALUE! #VALUE!
Static fluid eq. pipe length ft 0 0 #VALUE! #VALUE! #VALUE! #VALUE!
Pipe length (clean/new) ft 100.0 100.0 100.0 100.0 100.0 100.0
Fittings eq. pipe length (K Values) ft 0.0 0.0 #VALUE! #VALUE! #VALUE! #VALUE!
Velocity Fluid Head ft 67.06 0.14 #VALUE! #VALUE! #VALUE! #VALUE!
Static Fluid Head ft 0.00 0.00 0.00 0.00 0.00 0.00
Friction Fluid Head (clean/new) ft 9.91 0.06 #VALUE! #VALUE! #VALUE! #VALUE!
Fittings Fluid Head (K Values) ft 0.00 0.00 #VALUE! #VALUE! #VALUE! #VALUE!

Program Revision 2.0b: Issued 05-Mar-10 CONFIDENTIAL Print Date: 6/6/2019