ACS312 Level 1
ACS312 Level 1
Contents
2. Select XYZ Corp and click the Open button to learn how the software operates.
2
Almyta Control System - Quick Start
To create a real company, select New Company with Clean Data. For a new test, select New Company with Test Data. If
you want to link to an existing networked company or a SQL Server hosted company, select Link to an Existing Company
on the Network. On the next screen, specify a new company name for first two options, or browse the network to point
to an existing company.
3
Almyta Control System - Quick Start
The application menu is located at the top and consists of a few tabs: Home, Orders, Inventory, Assets, Reports, System,
Data, Report Preview, Add-ins, and Help.
Each tab is divided into groups. In the above tab, the groups are All Commands, External Commands, and Exit.
small button,
or split button.
The split button has two uses. Clicking on the text (in this case, “Warehouse Locations”) opens a corresponding screen
immediately. Clicking on the down-arrow, to the right of the text, opens a dropdown menu with more options.
4
Almyta Control System - Quick Start
Saving changes
Click on the pencil located on the record selector, click on a different record, or press SHIFT+ENTER. The Pencil should
change to the right arrow.
Press the ESC key once to cancel changes to the last field
This can be done before a record has been saved (pencil in the selector). The right-arrow, in the selector, means that the
record is saved or restored.
5
Almyta Control System - Quick Start
To add a new record on the spreadsheet-like screens, go to the last record marked with an asterisk, or click on the Add
New button on the bottom left, or click a small “new” button located at the very bottom in the record navigation panel.
On a single-record-per-page screen, such as item master or purchase/shipping order, use the Yellow Plus Sign button
located at the top left part of the screen.
Deleting a record
To delete a line item from a purchase or shipping order, click on the record selector and press the DELETE key on the
keyboard.
6
Almyta Control System - Quick Start
To delete a purchase or shipping order, item master record, supplier, customer, or one of some other kinds of record,
click the Trash Can button in the left top corner of the screen.
There is no way to delete a reference record such as a category or package type. To prevent the use of such record in
the future, turn off the USE switch.
Common warnings
The warning “The text you entered isn’t an item in the list” appears when you input a non-existing value into the
dropdown lists. Press the ESC key once to return to the dropdown list, press ESC a second time to restore an original
value in the field. Press the F4 function key to open a dropdown list.
7
Almyta Control System - Quick Start
8
Almyta Control System - Quick Start
Open any Almyta company and go to the Help menu tab, Data Entry and Navigation interactive tutorial to learn how to
better navigate your inventory software.
There are a few popup menus, which are useful for quick data access and browsing. Right-click the Item ID field to
quickly access inventory related functions.
Right-click any other field to quickly access navigation and search functions.
9
Almyta Control System - Quick Start
When you see an underlined label, double-click a corresponding to it field to quickly move to the data origin. In some
cases, clicking on a label itself duplicates this function. Although, clicking on the underlined label is getting faded out and
will be replaced with a double-click on the label or the field. Next example shows how to see item prices by a customer
price level. Double-clicking on the 16.80 brings up the popup screen with all prices by level.
Unrelated note. This popup screen will stay on a top of other screens. Move it aside and browse the Item Master List
screen to see prices for other items.
10
Almyta Control System - Quick Start
On a browse and search screens, double-click a cell to quickly go to source screen. This is a list active of column names:
"Appointment No", "SO Number", "WO Number", "PO Number", "Item ID", "Assembly ID", "Component ID", "Main Item
ID", "Alt Item ID", "Asset Tag", "Parent Asset", "Assigned to Asset", "Carrier ID", "Carrier Name", "Category Name",
"Category", "Customer ID", "Ship to ID", "Customer Name", "Ship to Name", "Consignee Name", "Supplier ID", "Supplier
Name", "Container Number", "Repair Number", "Sales Quote No".
On the screen snapshot, double-clicking cell P0035 opens Purchase Order Detail screen and loads purchase order
number P0035.
11
Almyta Control System - Quick Start
On the next screen, use checkboxes to specify which columns you want to see. We selected the Description column.
Click the Save button to accept your selection.
The changes will appear on the screen immediately. They are also saved permanently (per user) and reappear next time.
12
Almyta Control System - Quick Start
On the next screen, turn on or off a checkbox to the left of the column name. We selected the Category column.
Next time you preview or print this report, the column selection will appear.
13
Almyta Control System - Quick Start
Almyta accepts data in comma-delimited or TAB delimited format also called as CSV. If your data is currently in a
spreadsheet format, save it in CSV format. Sample below shows how to do it in Excel 2007-2010.
In Save as Type, select CSV format, browse for a folder to save file in, and click the Save button.
14
Almyta Control System - Quick Start
Click Yes to the popup warning then close the spreadsheet without saving it.
Item Master list can be imported in stages. Almyta will match records by Item ID. If a matching record exists, it gets
updated. Otherwise, it gets appended as a new inventory item. This allows to do bulk updates modifying only certain
fields. For instance, to load new prices, you need to import only two columns, Item ID and Unit Price.
Open your company in Almyta and go to Data menu tab, Import. On the Import Data screen, select Item Master List in
the Import Database field. Click the Load File button browse to the saved CSV file and double-click it. Select a value in
the Column Header for each column that you need to import.
15
Almyta Control System - Quick Start
Alternatively, if the top row in CSV contains column headers (field names), check First Row is a Header tick box at the
bottom and then click the Map button. A header will be selected for you for each field matching a column name.
Regardless, whether you need to auto-map fields or not, check First Row is a Header tick box if the CSV contain header
row before importing.
Finally click the Import button. The import procedure will run up to a first error. If there is a problem with a row, you will
see it at the top of the screen and popup message will tell you what the problem is. You can update your data right on
screen and continue or you can delete the row by clicking on the arrow to the row’s left and pressing the Delete key on
the keyboard.
16
Almyta Control System - Quick Start
The mandatory fields for importing current inventory position are Item ID, Quantity (Units), Location. All other fields are
optional. A list of inventory units can be embedded in the Item Master CSV file or be in a separate file. In our example
above, we had two extra columns, units and location, which we skipped (columns 2 and 3). Now we can use the same
file to import current inventory. The screen selections, in this case, are shown bellow.
To import customers or suppliers list, you need to create an ID for each row. In the example below, the ID has been
added to the column A. Customer and Supplier IDs help to quickly find a record in Almyta. Also in some cases, the IDs
can be used to categorize the companies.
Loading and mapping the above file into the Data Import screen should look like this
17
Almyta Control System - Quick Start
If in the list of companies, the last address line comes in three separate columns (City, State, ZIP or City, Province, Postal
Code), you can use formula to combine three columns in one. Also, it would be more practical to insert a column to the
left of the city and then apply formula to all column cells.
18
Almyta Control System - Quick Start
Convert the logo into BMP format. To do this, open the logo with Windows Paint (in Windows Explorer, right-click select
Open With, Paint). In Paint, select File/Save As menu, select 24-bit Bitmap, specify file name, and click Save.
19
Almyta Control System - Quick Start
Open Almyta Company that requires a new logo. Go to the System menu tab, Logos. Click the Yellow Plus button at the
top, left. Input a new logo name (Standard Logo), and click OK.
20
Almyta Control System - Quick Start
Right-click on the white square and select Paste from the popup menu.
21
Almyta Control System - Quick Start
Use right and down arrow buttons to resize the image printing area and then close the screen.
Go to the System menu tab, Options screen, 8. Logo Selection tab. Select the new logo for each report type you need it
to appear on, click the Save and Close button.
22
Almyta Control System - Quick Start
23
Almyta Control System - Quick Start
24
Almyta Control System - Quick Start
The Trashcan button discontinues the selected item. To find a discontinued item later, select the Discontinued (not) in
Stock in the top middle filter. The Item ID dropdown list will be filtered with all such items. Select an item in the list to
load the record. Click the Trashcan button to restore or hard delete the record.
The Pencil modifies item ID and preserves current and historical data related to this item. This is not the same as
deleting and recreating and item with a new ID. The current and historical data will be mostly lost in this case.
The Binoculars button opens the Search screen. Start typing a word or words separated by space. The Search screen will
filter the screen down as you type. The Search screen looks into the Item ID and the Item Description. To find all records
with “phone case” in the description, something like type “ph ca”. To load a record, double-click it in the list or use the
Tab key, then Up/Down Arrow keys to select a record and press the Ender key.
With one exception, right-clicking the Item ID on any screen shows a popup menu with eleven shortcuts. The menu will
look like on this snapshot.
25
Almyta Control System - Quick Start
The Globe button opens the default internet browser and follows to a web page specified in the wwwCatalog.csv file.
The catalog is expected to be in the comma-delimited format, which can be maintained in any spreadsheet application.
The catalog should have two columns ITEM ID and Web Page URL. Sample row for item TLP-2844 (Zebra Label Printer),
pointing to the manufacturer page, would look like this.
TLP-2844,https://www.zebra.com/us/en/support-downloads/printers/desktop/tlp-2844.html
Clicking the Globe button for the TLP-2844 printer should show this page:
The disk folder for the wwwCatalog.csv file is specified in the System/Options menu, tab 9, field 3. You can use a local a
folder on a local disk or a network location like \\Server\Share\Folder.
26
Almyta Control System - Quick Start
You can find there a few useful shortcuts like adjustment history and the actions like copy a current record or Quick
Positive Adjustment. The blue right arrow button reapplies the selection.
27
Almyta Control System - Quick Start
Go to the menu Inventory/Item Master and create a new item. Select Category, Base Units of Measure, Package
Type. Select [make] for the Main Supplier.
Add components to the bill of materials. At the bottom of the Item Master list screen, select Components or go
to the Inventory menu tab, Lists group, Bill of Materials and select the item.
28
Almyta Control System - Quick Start
On the Bill of Materials (Components) screen, click the Add button, input a few first letters of a Component
(Item) ID or just type * to see all items.
On the next screen, select all components that you need to add (use Shift and Ctrl keys for multiple selections)
and click the Select button.
29
Almyta Control System - Quick Start
Back on the Components screen, specify number of required units for each component and in the Assembly
Units, input number units that this bill produces.
To add a labor to your bill, first create special category and mark it as a service.
Then add labor item(s) to the Item Master List and assign the labor type category to each such item. Add labor
item(s) to your bill as any other component.
Note. For the assembly items, unit cost cannot be changed by user on the Item Master List. The Unit Cost field is
not editable. The cost is calculated automatically by the software.
30
Almyta Control System - Quick Start
Managing Components
Pick a label that you wish to replace from the Component ID drop-down list. Pick new label from the Replace with drop-
down list.
Make sure that the check box is marked for the assembly.
31
Almyta Control System - Quick Start
Close the screen and click the Yes option to recalculate the costs of assemblies.
Go back to menu Inventory/Lists group, Bill of Materials option. Pick NRG-A40H from the Item (BOM) ID drop-down list.
System also recalculated Unit Cost of the assembly base on LABEL-NEW price. Price of the Unit Cost assembly for the
NRH-LBL1 of $0.10 is $3.70.
Price of the Unit Cost assembly for the LABEL-NEW of $0.05 is $3.65.
32
Almyta Control System - Quick Start
Click the Delete button to remove LABEL-NEW from the marked assembly.
33
Almyta Control System - Quick Start
Desktop
1. Go to the menu Inventory tab and click the Direct Receive icon:
2. Select values in the Item ID column, input units, select the adjustment code (Cash Purchase), and click the Receive
button.
and the Stow List – the document listing all received items with a hint of warehouse locations.
34
Almyta Control System - Quick Start
Handheld Device
On the handheld device, select the RECEIVE menu. Select the Direct Adjustment in the reference field, scan, type in or
select the Item ID, changes quantity if needed, scan a serial number if it applies to the Item ID (the Use switch should be
turned on, Item Master, Stocking Properties tab), scan or input Warehouse Location, press Enter on keypad or push the
Save button.
The transaction will saved and the cursor placed in the Item ID field ready for the next entry.
35
Almyta Control System - Quick Start
Go to the Inventory/Locate and Move menu. Apply filters if necessary and click the View button.
The Selected Units screen will appear. The screen supports a few functions (from left to right):
1. The Item Master opens the Item Master screen and scrolls to a corresponding record.
2. The Unit Detail shows an underlying detail for the current row. Shortcut: double-click the Serial Number.
3. The Labels prints labels for a current row or for the selected rows.
36
Almyta Control System - Quick Start
4. The Consolidate combines multiple rows into one. Use checkbox to select desired rows. Some details will be lost.
The details of top row will be used as a master detail.
5. The Disassemble splits a current row into its BOM components. As an example, think of a gearbox that will be
split into a core, gears, shafts, bolts, and washers. This allows to stock used components and sell them
separately or assemble into a new gearbox.
6. The Issue opens the Direct Negative Adjustment screen and populates it with a current or selected rows.
7. The Split Lot creates a new row with and preserves a total weight, adds one unit if necessary. This function
should be used for items when units rather represent a package like a bag of coffee. Splitting 50 kg bag of coffee
(1 unit) into two bags will create two rows, one unit in each but with a total weight the same as in the original
bag (50 kg).
8. The Move places rows into a different warehouse location or takes a few units from the current row.
The screen can also be sorted and searched by right-clicking any cell.
37
Almyta Control System - Quick Start
2. On the Locate and Move screen, click the Move button. You can also double-click the Location field instead of clicking
the Move button.
3. On the popup screen, select new warehouse location and click the Move button
38
Almyta Control System - Quick Start
Input “SHELF10-A” into the New Location field. If “SHELF10-A” does not exist in the database yet, Almyta will offer to
add it.
Click Yes, then click Move or just press the Enter key. On the Locate and Move screen, the location has changed.
39
Almyta Control System - Quick Start
Now let us clone the lot preserving total number of units. Click the Move button or double-click the Location cell.
40
Almyta Control System - Quick Start
Finally, use the “5->2+2+1” button to create a smaller lots. If you need one unit per row, input 1 on the next screen and
press the Enter key. The resulting screen is shown below.
Bulk Move
Use Select/Deselect button and deselect all rows if you do not see all rows on screen.
Use the checkbox on the left side of each row to select desired rows.
41
Almyta Control System - Quick Start
Click the Move button, the Yes button to confirm system warning, select new location from the list and click the Move
button to finalize the transaction.
42
Almyta Control System - Quick Start
If multiple matching numbers found, a popup list is displayed; push a list entry to select one.
Change the quantity if only a few pieces are taken from the box, scan or type new warehouse location.
43
Almyta Control System - Quick Start
44
Almyta Control System - Quick Start
Splitting lots
In the above section, we discussed how to take a few boxes off the pallet. However, what do we do when our inventory
consists of coffee bags? In this case, taking a few units from a bag would not work because the bag is the unit. The
example below shows how to take two pounds of coffee out of a 50-pound bag. This makes two pounds available for
shipping and leaves us with 48 pounds in the bag.
2. Receive a single bag using the Detailed Receive screen. To go to the Detailed Receive screen and click the Switch View
button.
45
Almyta Control System - Quick Start
3. Before we can ship, we should locate our bag in inventory and split it in two. This procedure creates two bags and
makes 2-pound bag available for shipping. Go to the Locate and Move screen.
4. Click the Split Lot button. On the Split Lot screen, specify a net weight for the new lot. Click the Split Lot button.
46
Almyta Control System - Quick Start
5. Here is the resulting screen. We now have two lots with one unit (bag) each.
47
Almyta Control System - Quick Start
Consolidating Lots
The lot consolidation is necessary for combining a few lots in one. This can be useful if you shipped a few cartons from
one pallet, a few from another and now left with several partial pallets. To do this, mark all rows (lots) you want to pick
the units (cartons) from, click on the Item ID of the “receiving” row (lot), and then click the Consolidate button. Click Yes
to confirm the operation.
48
Almyta Control System - Quick Start
Before you can use this feature, active multiple warehouses (System/Options, tab 5, field 9). All stock will be moved
to the warehouse with ID equal 1 as defined in System/Company Locations.
Go to the Inventory, Warehouse Transfers menu. Start filling the screen. For the first row, Source Warehouse,
Destination, Item Units, and the Required Date. To continue adding the transfer, fill only Item and Units columns. The
rest will be filled automatically per the first row, until you decide to change it. To start a new transfer, close the screen
and do the return back or change the Transfer ID number and continue.
When you are ready to transfer inventory, return to this screen, click on any row with the transfer ID, that you are
working on, and click the Transfer Stock button.
49
Almyta Control System - Quick Start
The Warehouse Transfer screen will open. Pick inventory units one by one or use Load All button, use the Pick List
button if needed, and finally click the Transfer button. All inventory units will be placed in the destination warehouse, in
the transfer ID location.
To place moved inventory in its actual warehouse locations, go to the Inventory/Warehouse Transfer/Receive menu.
or find a transfer ID on the warehouse Transfer screen, and click the Receive Stock Button. Use checkbox on the left to
select rows then click the Move button to bulk-move the units.
50
Almyta Control System - Quick Start
All units will be moved. Continue until all inventory units get stocked.
Using Warehouse Transfer screen, you can run a report with various filters. To see all records shown on screen, go down
to a new record and click on it then click the Report button. To see a report for a single transfer ID, click on any row with
that transfer and then use the Report button.
51
Almyta Control System - Quick Start
52
Almyta Control System - Quick Start
Desktop
2. On the Issue screen, select an adjustment code (Cycle Count), the Item ID, and specify how many units you want to
issue (2). Click the “double right” arrow to the left of Warehouse Location field or double-click the Warehouse Location
field itself. On the next screen, double-click a row you are picking from units from.
53
Almyta Control System - Quick Start
Handheld Device
Select the Ship menu. Select the Direct Adjustment. The cursor will jump to the Item ID list and the list will open. Scan
Item ID barcode or start typing it in. If the Item is found.
The cursor jumps to the Quantity field. The field is prepopulated with the Package size from the Item Master. Modify the
quantity or press the Enter to jump to the next field.
To find a specific inventory unit, you can scan or input unit’s serial number if applicable. If serial number is not available,
push the Location and scan or input location. Both fields will accept a wild card (*) offering you to select a specific unit
from the list.
54
Almyta Control System - Quick Start
Select an entry from the list to specify an exact unit that you are adjusting down. Finally push the Save button to register
the transaction.
55
Almyta Control System - Quick Start
If there is a need in putting away product before shipping or consumption, consider using staging locations in Almyta. A
sample of such usage could be loading a trailer and then verifying that all materials are picked properly before closing
the trailer’s doors. Another example is staging the components at an assembly line, verifying quality and quantities, then
consuming only what was needed, and moving the leftovers back to the warehouse. Using the staging areas reduces
bulk of data entry in the software.
Go to the Inventory menu tab and select Warehouse Locations. Add all loading doors and mark them as Staging. We
have added DOOR1 and DOOR2.
On the Shipping Order or Work Order screen, create a new order or use an existing one. Specify the door (trailer) where
the order should be staged at (in).
56
Almyta Control System - Quick Start
Click the Print button at the bottom of the screen and then double-click the Pick List for Current Order.
57
Almyta Control System - Quick Start
Let a material handler to pick all specified materials and mark what has been picked.
The same person can also move the materials to the door as in a step below or someone in the shipping/production
office can do it. Here we do not describe such picking instances as with batch handheld devices or wireless live
terminals. On the full Locate and Move screen, mark the picked units.
Click the Move button at the top of the screen, specify new location (DOOR2), and click the bold Move button.
58
Almyta Control System - Quick Start
When all inventory units are staged, verify item IDs, quantities, and serial/lot numbers. Check product for possible
damages. Resolve any problems with the product. If any found adjust in the software by simply moving product in and
out of the staging area (DOOR2). Return to the Open Shipping Orders or the Work Orders screen and click the Issue
button (bottom-left).
Select the staging area (DOOR2) in the Staged dropdown and click the Load All button.
59
Almyta Control System - Quick Start
On the Sales Order or the Work Order screen, use the Manage Reserved button.
The Reserved Inventory screen appears. If there is nothing reserved, the screen will be empty. The button with the order
number in its caption is a toggle button. When the button is on, the screen filters itself by reserved units related to a
current order.
To view all related inventory, click on the Order Number button to turn it off. If there are any related units in stock, the
screen will show them.
60
Almyta Control System - Quick Start
Find a row, which you want to reserve for the order, and click the checkbox on the left.
If you need to reduce number of reserved units, tab to or click on the Units cell and type in a new number of units. Save
the change by going to another row or clicking on the record selector on the left.
The row will be split in two. One row will show an exact number of units reserved and a second new row will show the
rest number of units available for other orders. All reserved stock goes on hold automatically. To release inventory, turn
61
Almyta Control System - Quick Start
off the Reserved check box. You can use All Reserved button to see reserved stock for all orders and release any units if
necessary.
You can use the View in Stock button to open the Locate and Move screen. The screen will be filtered by inventory items
related to the current sales or work order. It will show all related units in stock reserved or not. This function can be
used to move stock around. If you choose to use Staging Areas to set aside raw materials or products as opposed to the
direct reservations, you can pick and choose the inventory and move it to staging. In this case, click the Manage
Reserved button on the Sales or Work Orders screen and then click the View in Stock button making no reservations.
62
Almyta Control System - Quick Start
System will advise you to use filters to freezing part or the entire inventory. Confirm the warning message. Click Yes to
proceed. As an example, we will freeze locations from A01 to A20 on the next screen.
After setting up the filters, click the Start button. Confirm printing out the Cycle Count report.
63
Almyta Control System - Quick Start
Print the report, take it to the warehouse, and use for the cycle count. Verify quantities in each location. Specify a real
count in the right column if deferent. Bring the report back to the office, use the Reconcile menu again to make all
necessary adjustments.
64
Almyta Control System - Quick Start
When you click the Yes button, Inventory Reconciliation screen will show up
For each row, use the Adjust button to specify the changes if needed. As an example, we will change number of units
from 4 to 3 in location A09.
65
Almyta Control System - Quick Start
When finished with the changes, click the Merge All Changes button to save them permanently in the database. Click the
OK button on verification screen. The counts are adjusted, inventory is released, and available for receiving, moving, and
shipping.
If all counts appear to be accurate, there is no need for any adjustments. Return to the Reconcile function located in the
Inventory menu tab.
66
Almyta Control System - Quick Start
On the Cycle Count screen, use the Release button to unfreeze all counted inventory units.
Handheld Device
Select the Cycle Count menu. On the next screen, choose Yes if your inventory is serialized and serial numbers are
barcoded on the labels, in all other cases, choose No. Let us start with the serialized and barcoded inventory. The screen
opens and the cursor is placed in the Serial field.
Scan a serial number. If the number is found in the database, the record will loaded on screen.
67
Almyta Control System - Quick Start
The Moved & Save message will appear. Scan next serial number.
68
Almyta Control System - Quick Start
69
Almyta Control System - Quick Start
Verify the change and push the Save button or press the Enter key. The confirmation message will appear on the screen.
70
Almyta Control System - Quick Start
There are two reports related to the Cycle Counts done by handhelds.
The Inventory Mobile Cycle Count report shows every unit that was counted, assuming that you specified the Count
Date filter. In our example, we counted inventory on July 5, 2017.
71
Almyta Control System - Quick Start
This report can also be used to find out what was not counted today by changing the date filter to less than (<)
The Count Date value can also be changed to something far in the past like January 1, 2000 to find inventory that was
never counted and therefore could be lost by now.
72
Almyta Control System - Quick Start
The Inventory Mobile Cycle Audit report shows what changes were done by the counts. The changes include positive
adjustments, negative adjustments, and any movements. The Audit does not show any good counts, those that did not
produce any changes.
73
Almyta Control System - Quick Start
Leasing Inventory
Eighty percent of businesses use leasing to meet their equipment needs, and it is likely that your clients prefer to lease
with you. Sold inventory is permanently written off the books. The leased inventory continues to stay on the books as an
asset. It just becomes unavailable for selling or leasing.
Follow to the Inventory menu tab and select Leasing in the Activities group.
On the Lease Inventory screen, select a customer in the Lease to Customer ID field. Select Item ID and then select a unit
serial number. Continue with the next item. Change the Lease Date if different from today, change the reference to your
invoice number, customer’s sales order, contract, or just leave a default reference. When finished, click the Lease
button.
74
Almyta Control System - Quick Start
There will be “Items have been moved” message and then a packing list will appear on screen. Use Print or Quick Print
button (top left menu) to send it to a printer.
Follow to the Inventory menu tab and select Locate and Move. Select a customer in the Leased to Customer list and click
the View button. You can also select “All Leased” value in this list and supply other filters if needed.
75
Almyta Control System - Quick Start
The leased inventory will show in the “Customer ID” warehouse location.
There are also a few reports associated with leasing. Go to the Reports menu tab, Inventory group and select More
Reports. Scroll down the list of reports until you see Leased Inventory reports. They are located closer to the list bottom.
To bring leased inventory back, simply go to the Inventory menu tab, and click Lease. In the Lease to Customer ID, select
[home]. Start adding items and serial numbers one by one, or use the Bring All button and select a customer. Using the
76
Almyta Control System - Quick Start
Bring All function is convenient when most of the leased inventory is getting back home. Delete the records representing
inventory, which is still at the customer’s site. After finishing the data entry, click the Bring Back button.
If we are leasing inventory to a customer’s site, which is operating only a part of the year, we can find what is leased but
not used now. This could be the case when the customer’s site is operating on a seasonal basis. An example of such site
is an amusement park or a racetrack. Before we can use this functionality, the operating dates must be entered in the
customer record. Follow to Orders menu tab and select Customers in the Lists group.
77
Almyta Control System - Quick Start
On the Customers screen, select a record in the Customer ID list and switch to the Notes/Status tab. Specify the date
ranges in the Operating Dates field. The dates must be entered in the following format:
5/1/2008-2/1/2009;5/1/2009-2/1/2010;5/1/2010-2/1/2011;
Now we can find “not in use” leased inventory. To do so, find Leased Inventory not in Use report in the Inventory section
on the All Reports screen. This report should be closer to the list bottom.
78
Almyta Control System - Quick Start
79
Almyta Control System - Quick Start
If the Let System Assign switch is turned on, the number style and value should be set prior to usage in the
System/Options screen, tab 1, fields 5 and 14.
80
Almyta Control System - Quick Start
To make a quick direct positive inventory adjustment with a serial/lot number, go to the Inventory/Receive by Serial
menu. Start with the Adjustment Code, change the reference and/or date if needed, select Item ID, change the
warehouse location if needed, finally scan or type in a serial/lot number. If you use a scanner, the transaction will be
registered immediately. If you are typing numbers, press the Enter key to record the transaction. After the transaction is
recorded, the cursor will jump back to the Serial Number field, getting ready for the next transaction. All fields above will
stay the same. Change any of them if necessary, especially if the next serial/lot belongs to a different Item.
supported. This allows to input just a fragment of the number. The Serial/Lot numbers as any other piece of data in the
database is case-insensitive. Below are some samples of search values and corresponding results.
82
Almyta Control System - Quick Start
If you need to locate inventory by serial/lot number that is no longer in stock, go to the Inventory/Find in Archives, input
a number or a fragment of it with the wildcards, and click the View All button. On the snapshot below, we trying to filter
the archives by the numbers containing digit 1.
83
Almyta Control System - Quick Start
84
Almyta Control System - Quick Start
Attaching Documents
For the attachments to work, turn off the System/Options, tab 5, switch 22 OFF.
If you need to add an existing document, click the Browse link in the new record row. Browse your computer or the
network and select the document.
85
Almyta Control System - Quick Start
If the document comes on paper and you have a scanner attached to your computer or somewhere on your network,
use the Scan Image button instead of the browse link.
In the example below, the restriction will apply to all PDF documents attached to the Purchase Orders screens. An
attempt to reference PDF file in any other location will be rejected showing user where the file should be. On the
computer where the screen was viewed, the Z: dive was mapped to \\ALM313\Data folder. So, two definitions point to
the same physical location. Only one is needed, of course. The second definition is recommended, because it is more
flexible. Relocating the attachments folder from \\ALM313\Data folder to \\ALM314\Data folder will not break the
references if you remap Z: to \\ALM314\Data folder. All references will be good.
There is another way of keeping all attachment in one place by copying them automatically in that place and then
referencing. To do this, specify server and share in the System/Options, tab 9, field 9. You will see this folder on the
Attachment Locations screen when you open it next time.
86
Almyta Control System - Quick Start
The three rows above serve as an example. You will need only one.
Having a restriction like in the first row will copy PDF documents related to the purchase orders to the
\\ALM313\Disks\Data\Attachments folder.
The second row will force the copying of PDFs, JPGs, DOCXs files related to the purchase orders to the
\\ALM313\Disks\Data\Attachments\2017 folder (for year 2017).
The third row will force the copying of PDFs, JPGs, XLSXs files related to the purchase orders to the
\\ALM313\Disks\Data\Attachments\2017-06 folder (for month of June, 2017).
All file types not listed in the types cell will go to the \\ALM313\Disks folder.
Having “Copy to this location” specified as \\ALM313\Disks\[YYYY-MM] and the Attachment Location \Purchasing will
copy files into the \\ALM313\disks\2017-06\Purchasing folder.
All folders are created automatically. They do not need to exist prior to usage.
87
Almyta Control System - Quick Start
To simplify the picking process, Almyta has the Auto-Picking feature. Let us assume we always need to pick the oldest
inventory units by the receiving date. To simplify the process, we need to configure the software once. Go to the System
menu tab, the Options screen, tab #4.
In the 13 Picking Scheme select the Receiving Date First-in-First-out (FIFO) and click Save & Close.
88
Almyta Control System - Quick Start
Now, on the Issue Screen, just click the Load All button and the software will make a picking decision for you.
On the right site of the screen, click the Print Pick Ticket button.
Use the #2 Issue button to finalize the issue. Use the printed pick ticket to pull the inventory out.
89
Almyta Control System - Quick Start
Browsing, previewing, and printing functions are alike. Therefore, they will be introduced together.
There is a Browse menu choice available for each order type, inventory, and assets.
The browse moves us immediately to a data browse screen. Below is the Item Master Summary browse screen.
90
Almyta Control System - Quick Start
1. The Browse screen offers the following options (from left to right):
2. The Up and down Arrow buttons increase or decrease the datasheet font.
3. The “Freeze Columns” button prevents an auto-resize of column widths when the screen gets resized.
4. Preview, Print, PDF will send a report based on a current datasheet to the screen, default printer, and a PDF file
correspondently.
5. The Configure button moves us to the screen with report configuration options.
The Browse screen offers Sort, Search, Copy, and Filter functions. To sort data by any column, right-click the column and
choose Sort Ascending or Descending from the popup menu. At the bottom of the screen, in the record navigation area,
we can quickly move to a row number by typing the number in to the Current Record Number field.
91
Almyta Control System - Quick Start
In addition, we can quickly search for a first occurrence of any phrase or number.
Running a report is like the browsing. In the Reports menu tab, select a desired report.
On the next screen, we can just click a desired report output button or specify desired filters and configurations, and
then run our report. Also to quickly browse data, we can just double-click a desired report. The double-click is of the
same function as the Browse button on the Top-Left of the screen.
92
Almyta Control System - Quick Start
The buttons in a top row provide the following functions (left to right):
The Search button allows us to find all reports with a phrase in their name. Click the Search button, input “value” and
press the ENTER key. All reports with the word “value” in their name will appear in the list of available reports.
The Favorites button adds the selected report to a list of favorite reports. Click the Add to Favorites button and report
will be inserted in a list of your favorite reports. To see your favorite reports, select Favorites in the Report Type list
The Preview button sends a printer-formatted on screen. You can click on the report body to zoom in or out. The
preview screen will change the application menu to the Report Preview. This menu contains only the report-related
options. This menu is very useful in many aspects. Click Print on the left to choose a different from the default printer.
Click Quick Print to send the report to the default printer right away.
93
Almyta Control System - Quick Start
The Print button sends the selected report to the default printer.
The Excel button outputs the report into Microsoft Excel file.
The PDF button outputs the report into Adobe PDF file.
The Word button outputs the report into Microsoft Word file.
The next row of buttons and choices function as the following (left to right)
The Configure button moves to a screen with the selected report definition.
The Report Type list is a list of available report types. Inside the list, we can also find “Report Usage History” and
“Favorites” sections.
Up and down Arrows increase or decrease a font size of the List of Columns section below.
The Save Filters button preserves current filter selection for future use.
The Hide Subtotals checkbox causes not to show the subtotal rows on the printed reports.
The Hide Totals checkbox causes not to show the total row on the printed report.
The “11” is a font size for the Browse screen or printed report.
The following filter setting will output all open purchase orders created in a year of 2010.
95
Almyta Control System - Quick Start
To call up a calendar for the date fields, double-click the Starting/Ending field and click the Calendar picker button.
To sort a report by a specific column or columns, turn on A-Z or Z-A switch for a corresponding column. In the Sorting
Priority column, specify which sorting takes place over another. The following filter/sort setting will output all open
purchase orders created in a year 2010, sorted by the PO Requestor in the descending order and then by the PO Number
in the ascending order.
96
Almyta Control System - Quick Start
There are three more columns on the Filters section of the screen.
Colum justification should be set to L for left, C for center and R for right. The default is L.
Column format: T-for text, D – for date, N for number with a number of decimal placed that is defined in the
System/Options screen, tab 5, field 17, N1, N2, N3 for a number with the decimals equal to 1,2,3, C for a currency with a
format defined in the System/Options screen, tab 5, field 3, or C1, C2, C3, for a currency with decimals equal to 1,2,3, P –
for a percent format. The default format is T.
Column width is a column width relative to other columns. All column widths are added together compared to the
report width and then each relative width weighed against the total relative width.
97
Almyta Control System - Quick Start
Customers and
Customers and Contacts Detail Orders Lists Contacts
Customers and
Customers and Contacts Search Orders Lists Contacts / Search
Data Change Source Data Utilities Re-Link
Data Export Data Import/Export Saved Exports
Data Export to MS Word Data Import/Export Export to MS Word
Data Fix Discrepancies Data Utilities Fix Data Discrepancies
Data Import Data Import/Export Import
Data Purge Data Utilities Purge
Data Quick Initialization Data Utilities Quick Initialization
Company Locations /
Default Memos and Form Trailers System Information Default Memos
Active Items /
Discontinued Inventory Browse Inventory Lists Discontinued
Error Log System Information Error Log
Return to Almyta
Exit and Return to Company Selector Home Exit Company Selector
Exit Application Home Exit Exit
Files in Use by Application System Information Files in Use
Find a record (CTRL+F) Home All Commands Find
Find a window (screen or report) Home All Commands Switch Windows
Find and Replace (CTRL+H) Home All Commands Replace
Company Locations /
Fiscal Month List System Information Fiscal Months
Help Level 1 Help Available Doc.. Starting Up
Help Level 2 (Registered Users Only) Help Available Doc.. Intermediate
Help Level 3 (Registered Users Only) Help Available Doc.. Advanced
Inventory Buying Price Quote Orders Purchasing Cost Quote
Inventory Cycle Count and Reconciliation Inventory Activities Reconcile
Inventory Item ID Change Data Utilities Modify Item ID
Inventory Item Master List Browse Inventory Lists Active Items
Inventory Item Master List Detail Inventory Lists Item Master
Inventory Item Price Markup Data Utilities Item Price Markup
Inventory Leasing Inventory Activities Lease
Inventory Locate and Move Inventory Activities Locate and Move
Inventory Locations in Warehouse List Inventory Lists Warehouse Locations
Inventory Negative Adjustment Inventory Activities Direct Issue
Inventory Positive Adjustment Inventory Activities Direct Receive
Inventory Positive Adjustment by Serial Inventory Activities Receive by Serial
Inventory Quick Move by Serial Number Inventory Activities Quick Move
Find Shipped or
Inventory Search Archives Inventory Activities Consumed
Inventory Search Item Master Inventory Lists Search Item Master
99
Almyta Control System - Quick Start
Warehouse Locations
Positive Adjustment Codes List Inventory Lists / Positive Adjustments
Browse Open /
Purchase Orders Browse Canceled Orders Purchasing Canceled
Browse Open /
Partially Received and
Purchase Orders Browse Closed Received Orders Purchasing Closed
Purchase Orders Browse Open Orders Purchasing Browse Open
Browse Open /
Partially Received and
Purchase Orders Browse Open Received Orders Purchasing Opened
Browse Open / Past
Purchase Orders Browse Past Due Orders Purchasing Due
Purchase Orders Detail Orders Purchasing Order Details
Purchase Orders Utilities (Auto Create) Orders Purchasing Utilities
Refresh Screen Data (F5) Home All Commands Refresh All
Registration of the Application System Information Software Registration
Repair Process Points List Inventory Lists Repair Process Points
Company Locations /
Sales Taxes List System Information Sales Taxes
Security Activation and Maintenance System Security User Permissions
Shared Components Used by Application System Information Shared Components
List of Carriers /
Ship Via (Carrier Type) Orders Lists Carrier Types
Sales and
Shipping Order Browse All Orders Shipping Browse All
Sales and
Shipping Order Browse Canceled Orders Shipping Browse All / Canceled
100
Almyta Control System - Quick Start
101
Almyta Control System - Quick Start
102
Almyta Control System - Quick Start
The Options screen can be found in the System tab, Configuration group. A significant part of the software configuration
is set on this screen.
1. Receiving Location A default for the Default Location on the Item Master
2. Package A default value for the Package on the Item Master
3. Units of Measure A default value for the Base UOM on the Item Master
4. Terms A default value for the Terms for Customers and Suppliers
5. Ship Via A Default value for the Ship Via for Customers and Suppliers
7. PO Supplier Part A priority in which the Supplier Part number will be searched and
selected when a new line item is added to a purchase order.
8. Category A default value for the Category on the Item Master
9. Default PDF Writer A default PDF printer. This printer will be used when Report
Preview, Export to PDF button is clicked.
3. Workstation tab
6. Show tip buttons on screens When ON, the Light Bulb button is visible on screens.
4. Shipping/Issues tab
1. Packing List Output When a shipping order is issued, the packing list is automatically
printed to this device.
2. Issue Screen View A short form of the Issue screen is using this format by default.
3. Copy remarks into log files The remarks for each unit will be copied into the history log. This
when loading information can be later accessed by custom reports.
4. Allow duplicate line items in Allows an addition of duplicate Item IDs to the shipping order line
orders items.
5. Allow Short Issues Allows to ship orders short, when not all items are available.
6. Check for duplicate Process Duplications will not be allowed for the Process Numbers. Turning
numbers this switch on will no force the rule for the existing orders.
7. Archive units when issued After getting issued, all inventory units will be copied into the
archives rather than being simply deleted. The archives can be
accessed later by reports or browsed on screen by going to the
Inventory tab, Activities group, Find Shipped or Consumed button.
104
Almyta Control System - Quick Start
8. Support for kits when When ON, the kits can be shipped without pre-assembly. Two
shipping fields will appear on the Shipping Orders screen, Line Items tab: Kit
# and Units. Selecting Kit # and specifying number of Units will
populate the order line items with the kit's components.
9. Use Line of Business When ON, the Line of Business reference is shown on the
reference Customers and Contacts screen.
10. Warn of insufficient When ON, the software will show a warning message for each line
quantity in stock item with insufficient quantities in stock. The warning is shown
when the line item is being modified.
11. Do not fulfill [Ship Date]- The orders with the Shipping Date this many days in the future will
[Today] > not be fulfilled by functions found on the Order Fulfillment screen
(Orders tab).
12. Backorders When shipping short, the software will use one of the following
“Do not make shipping backorders ", "Offer to create new shipping
order", or "Always create new shipping order" depending on a
selection in this field.
13. Picking Scheme When the Load All button on the Issue screen is pressed, the
inventory units are selected based on this field's value. The choices
are these: (1) Consolidate, the units are first picked from a location
with the smallest number of units. (2) Expiration Date, the units
with the soonest date are picked first. (3) Office Specifies, when
selected the Pick Form field on the Shipping Order Line Items
become available and pick from location can be set in advance by a
person creating an order. (4) Production Date (FIFO), the units with
the oldest production date are picked first. (5) Receiving Date
(FIFO), the oldest units by the receiving date picked first. (6)
Receiving Date (LIFO), the most recent units by the receiving date
picked first. (7) Serial/Lot numbers from lowest to highest, all units
are sorted by serial number in ascending order. The picking starts
from the top. (8) Undefined, this means no preference. (9)
Warehouse decides, this is the same as Undefined.
14. Email notifications This will email to up to three sales representatives based on a
selection in this field. Conditions: (1) A sales representative should
be assigned to this customer on the Customer screen, the More
tab. (2) The sales representative must have a valid email address
(System B173tab, Security group, Users). (3) Field 5.1 is other than
"Never Send"
15. Ship To/Bill To unlinked When ON, the Ship To address will not be filtered by Bill to address
on the Shipping Order screen. Otherwise, the Ship To is always a
drop off location of the customer record selected on the left in the
Bill To field.
105
Almyta Control System - Quick Start
16. Require approval to issue When ON, each shipping order should be approved before
parts inventory is shipped. Conditions: (1) System Security must be
active. (2) The approving user should be a salesperson and have an
approval limit higher than the order total amount.
17. Show contact names When ON, each time the Bill To address is selected on a shipping
order screen, the contact names will be shown in the popup
message.
18. Recalculate packages based When ON, changing the Ordered Units on a shipping order forces
on units recalculation of the number of Packages. The number of packages
is calculated based on this formula [Packages]=[Ordered]/ [Item
Master List].[Units per Pack]
19. Recalculate units based on When ON, changing the Packs on a shipping order forces
packages recalculation of the Ordered units. The number of units is
calculated based on this formula [Ordered Units]=[Packages]*[Item
Master List].[Units per Pack]
20. Recalculate units based on When ON, changing the SO Units (additional units or units of issue)
add. units on a shipping order forces recalculation of the Ordered units. The
number of units is calculated based on UOM conversion: [Ordered
Units] = [SO Units] *[Item Master List].[UOM]/ [SO UOM]
21. Recalculate add. units When ON, changing the Packs on a shipping order forces
based on packages recalculation of the SO Units. The number of units is calculated
based on this formula: [SO Units] =[Packages]*[Item Master
List].[Units per Pack] *[SO UOM]/ [Item Master List].[UOM]
22. Print barcodes on Pick Lists When ON, the Shipping Order Number barcode is printed at the
top of a standard Pick List.
23. Print barcodes on Packing When ON, the Shipping Order and Customer PO barcodes are
Slips printed at the top of a standard Packing List.
24. Use staging area When ON, the Staging Area dropdown list becomes available on
the Issue screen. When the area (staging warehouse location) is
selected, the Load All button will pick only items from this area. In
a case of shortage, the rest should be loaded manually by clicking
on the Whse Location field for each not loaded line item.
25. B.O. Separator This separator will be used to specify backorder number. If the
original order number is S123, the backorder is receiving number
S123:2. Where colon is the separator.
5. System tab
1. Shared Data Folder The place where the data files are located on a local drive or a file
server. This does not apply to the SQL Server configurations.
2. Committed Quantities The Committed quantities on the Item Master List screen are
calculated based on this selection.
106
Almyta Control System - Quick Start
3. Decimals in Currency The currency type fields show this number of digits after the
decimal point.
4. One Supplier per Customer When ON, a customer can receive inventory only from the supplier
selected on the Customers screen, More tab.
5. Allow temporary item Ids When On, a temporary Item ID can be received. A permanent Item
ID can be assigned later when becomes available.
6. Measure [Fill to] and The Fill To and Reorder At points are measured in these units.
[Reorder at] in
7. Use Currency conversions When ON, the currency dropdown field becomes available on the
purchase and shipping orders. This allows to create orders in
foreign currency.
8. Use Sales Tax Two When ON, the Sales Tax Two field becomes available on the
purchase and shipping orders screens. This is useful for Canada,
Australia and others with two taxes.
9. Support Multiple When ON, multiple logical warehouses become available. To add
Warehouses new warehouse, go to the Company Locations in the System tab,
Information group.
10. Confirm warehouse each When ON, a warehouse selection is shown each time the inventory
time related report or screen is called.
11. Discount. Items In Stock When ON, an item discontinuing, that is in stock, is allowed.
12. Email This is a global switch for the emails sent by the software. Turning
it off stops email generation by all modulus.
13. Supplier/Customer Always ON. On the Suppliers and Customers screens the Red Stop
Warnings button is available in the top-right corner. Use this function to
receive a reminder when this supplier or customer is selected on
the shipping or purchase order screen.
14. Default additional units to When ON, the additional units (PO Units and SO Units) are always
standard defaulted to the Item Master units.
15. Inventory movement When ON, the data for the Audit Trail report is collected.
tracking
16. Equipment Leasing When ON, the Inventory Leasing functions are available.
17. Decimals in Units The inventory unit type fields show this number of digits after the
decimal point.
18. Always show Print Dialog When ON, reports are not sent directly to a Windows default
printer. The Print dialog is shown allowing user to select a different
printer and printer parameters such as margins, orientation,
source paper tray, etc.
19. Operator's name input When ON, a user is forced to input his/her name into the Operator
field.
20. Use Not Mixable Locations When ON, two different Items cannot be placed into the same
locations.
107
Almyta Control System - Quick Start
21. Tax Shipping charges When ON, the sales tax will be applied to the shipping charges as
well as to the order subtotal. This can be used in countries like
Australia, for instance.
22. Use Windows Logins When ON, the software will verify that the current Windows login
name exists in the User screen, Login field. The User Name and
Password popup is bypassed.
23. Login Timeout If not zero, this specifies a number of seconds to keep current user
logged into the software. After this, the User Name and Password
will popup. This option does not work with the 5.22 (Windows
Logins). The software security must be activated for this option to
be in effect.
24. Central Location: When ON, this location considered as a central one (main
warehouse). This option is valid for multiple physical sites
installations when database replication is used.
6. Assets tab
4. Copy Remark The same as above, but applied to the finished unit remarks.
5. Chemistry sheets When ON, Chemistry Sheets can be associated with inventory
units.
6. Create Chemistry record When ON, A default Chemistry Sheet can be used to attach to each
using default new finished unit.
7. Backorders for Work Orders Backorders for work orders are created based on this selection.
8. Backorder Separator This separator is sued to create a backorder number. For the
original order W123, a backorder number will be W123:2
108
Almyta Control System - Quick Start
9. Do not auto populate the When ON, user will select the components to consume on the
Issue screen Issue screen. The screen will not be pre-populated.
10. Allow partial assemblies When On, user is prompted "How many units to assemble?" when
issuing work order components.
11. Components are critical by When ON, a new work order is created with all components
default marked as critical.
12. Add Assemblies to 'On When ON, The On Order quantity of the work order assembly is
Order' increased to reflect future production.
13. Print Item Detail on a Work When ON, the assembly detailed notes are shown on the work
Order order printout. The detailed notes can be found on the Item
Master List screen, the More Details tab.
14. Do not reserve purchased When OFF, if a purchase order is created from the Work Order
inventory screen. The received inventory units will not be reserved for this
work order, but rather become available for other uses.
15. For POs, associate customer When ON, a purchase order is created for a supplier associated
with supplier with the customer selected on the work order. Condition: Option
5.4 must be ON.
9. Data Access
1. Do NOT Use Transactions When ON, the transactions will not be used and inconsistent
updates become possible. Turning this switch on is not
recommended.
2. Default Record Locking The choices are: (1) No locks. User can start editing records
without locking them. If another workstation modified the record
before the user had a chance to save the changes, a popup screen
will prompt to save changes to the clipboard or discard them. In
other word, the first who saves a record wins. (2) All records, locks
all records in the underlying table. (3) Only edited record gets
locked.
3. Images' Folder There small and large images seen on the Item Master List screen,
Picture tab are saved in this folder.
4. Number of Update Retries How many times the software will attempt to save over a currently
locked record.
109
Almyta Control System - Quick Start
5. ODBC Refresh Interval (Sec) All open screens are automatically refreshed from an SQL server
after this number of seconds. Applies to an SQL server
configurations only.
6. Refresh Interval (Sec) All open screens are automatically refreshed from a file server
after this number of seconds. Applies to a file server configuration.
7. Update Retry Interval If current a record is locked by another user, the software will try
(Milliseconds) to save the record again after this number of milliseconds.
1. Receiving Screen View The default view for the Receiving screen short form.
2. Allow User to Select When ON, a user can change the default Receiving screen view.
Receiving Screen View
3. When receiving against PO or When ON, the receiving screen is not getting pre-populated with
Appointment do not populate the line items. This is useful when receiving only a few line items at
receiving screen a time.
4. Assist in serial number When On, input the smallest serial number at the top of the pre-
assignment. Enter first number populated receiving screen and have the rest of numbers
and get the rest populated. populated based on an increment. This is useful for receiving
consequential serial numbers.
5. Fulfill shipping orders on When ON, the inventory receiving forces the software to check for
receipt any shipping backorders and inform a user if such orders were
found and ready to ship.
6. Do not split line items when When OFF, the line items on the Receiving screen is not split into
receiving packages. To receive inventory package by package (pallet by
pallet), the Item should have the Serial Number switch ON (Item
Master screen, Stocking Properties tab) and Units per Pack to be
greater than 1. For instance, if Units per Pack is 12 and Serial Use is
ON, inputting 120 units on the Receiving screen, splits the screen
into 10 rows. This allows specifying a serial/lot number for each
package without selecting the same Item ID 10 times.
7. Maximum number of rows To prevent errors, the Receiving screen will not split into more
(pallets) to split into than this number of rows.
1. Screen startup filter default When the Repairs screen is loaded, all orders are filtered by this
selection.
2. Create new order with this When new repair order is created, it receives this status assigned
status to it.
3. Order complete status When a repair order becomes completed, this status is assigned to
it.
110
Almyta Control System - Quick Start
4. Repair unit type The repair selection is allowed for the inventory unit type chosen
in this field.
1. Copy P.O. Line Items into When ON, the purchase order line item remarks will be attached to
Remarks the issuing logs
2. Unlink Purchasing from When ON, the purchase orders can be received without the
Inventory inventory position adjustments. The Received field on the Line
Items tab of the Purchase Order screen will be unlocked and
available for editing.
3. Hide deliveries tab on P.O. When ON, the Deliveries tab get hidden on the Purchase Orders
screens screen.
4. Allow direct shipments to When ON, the Ship To dropdown list on the Purchase Orders
customer screen is populated from Company Locations and Customer
Locations. This makes possible to create purchase orders for drop
shipments.
5. Use foreign currency prices When ON, the PO Currency and PO Cost fields appear on the Item
Master List screen.
6. Order in multiples of
7. Print PO on When Letter Head is selected, a standard purchase order header
including a preselected logo will not be printed leaving a space for
a preprinted letterhead.
8. Filter inventory by The Item ID dropdown list is filtered down by the selection in this
filed.
9. Record Additional Unit Cost The selection forces to distribute shipping costs evenly between
the received units.
10. Total Shipping Charges The total shipping charges, distributed between the received units,
are figured based on this selection.
12. PO Requestor Email Position ON. Emails are sent to the PO requestor in an event of
Notification receipt, approval, promised date change, or promised/requested
date missed. Conditions: System Security is active, field 5.1 is other
than "Never Send", a requestor selected on a PO, the requestor
has a valid email address. Any buyer's PC will attempt to email
notifications on startup.
13. Allow duplicate items When ON, adding duplicate Item IDs is allowed for the purchase
order line items.
14. Approval required When ON, the receiving purchase orders is not allowed. The
purchase order printout will show "this order is not approved"
warning at the top. Conditions: (1) System Security must be
active. (2) The approving user must be a buyer and have a
sufficient approval limit (System tab, Security group, Users).
15. Add Purchase Orders to 'On When ON, the On-Order quantities are incremented based on the
Order' purchase order quantity.
111
Almyta Control System - Quick Start
16. Add Appointments to 'On When ON, the On-Order quantities are incremented based on the
Order' appointment quantity.
112