Name of The Work :- Construction of Central Instrument Facility Building at Gauhati University, L.G.B.

Nagar, Jalukbari, Guwahati-781014

(This Estimate has been Prepared based on the APWD Schedule for the year 2013-14)

[A] CIVIL
WORKS

Quantity Rate
Item No Code Particulars (Units) (Rs/Unit) Amount Total Remarks

[1] UP TO PLINTH LEVEL

1
Earthwork in excavation for foundation trenches of walls, retaining walls,
footings of column, steps, septic tank etc. including refilling (return filling) the
quantity as necessary after completion of work, breaking clods in return filling,
dressing, watering and ramming etc. and removal of surplus earth with all lead
and lifts as directed and specified in the following classification of soils
1.1. including bailing out water where necessary as directed and specified.
(A) Up to a depth of 2.00m below the existing ground level.
(a) In ordinary soil 951.56 108.82 ₹103,548.76 cu-m

2
Providing solingin foundation and under floor with stone/ best quality picked
jhama brick, sand packed and laid to level and in panel after preparing the
subgrade as directed including all labour and materials and if necessary
4.1.1. dewatering, complete.
(b).Brick on edge soling 543.75 532.75 ₹289,682.81 sq-m

3
Plain cement concrete workswith coarse aggregate of sizes 13mm to 32mm in
foundation bed for footing steps, walls, brick works etc. as directed and
specified including dewatering if necessary, and curing complete (shuttering
2.1.1. where necessary shall be measured and paid separately).
(a) In prop 1cement: 3 sand :6 coarse aggregate by volume 43.5 4292.86 ₹186,739.41 cu-m

4
Shuttering and shoring the earth at different levels in foundations where
necessary with required prop, struts, planks, timbers, nails etc. including
dewatering if necessary, complete as directed and specified (measurement to
1.2. be taken in the face area timbered)
(d) Above 4.50 m upto 6.00 m depth 761.25 82.24 ₹62,605.20 cu-m

5
Providing form work of ordinary timber planking so as to give a rough finish
including centering, shuttering, strutting and propping etc., height of propping
and centering below supporting floor to ceiling not exceeding 4.0M and
3.1.1. removal of the same for in-situ reinforced concrete and plain concrete work in:

Foundation, footings, bases of columns, pile cap, raft and mass concrete
3.1.1.1. works etc.
(a) Using 38mm thick plank 139.2 276.07 ₹38,428.94 sq-m

3.1.1.2. Sides of tie beams, grade beams etc. at or below ground level.
(a) Using 38mm thick plank 216.64 364.29 ₹78,919.79

3.1.1.3. Columns, Pillars, Posts & Strut

(i) Using 38mm thick plank 222.72 394.81 ₹87,932.08

6
Supplying, fitting and fixing in position reinforcement bars conforming to
relevant I.S. Code for R.C.C. work/ R.B. walling including straightening,
cleaning, cutting and bending to proper shapes and length as per details,
supplying and binding with 20G annealed black wire and placing in position
with proper blocks, supports, chairs, spacers etc. complete.
(No extra measurement for lap, hook, chair, anchor etc. will be entertained in
18.1.1. the measurement as they are included in the rate) (Upto 1st floor level)
a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam
steel/RINL
(i) TMT Corrosion resistant steel(CRS)reiforcement bar 151.663 7158.9 ₹1,085,740.25 Qtl

7
 Providing and laying plain/reinforced cement croncrete works cement, coarse
sand & 20mm down graded stone aggregate including dewatering if
necessary, and curing complete but excluding cost of form work and
reinforcement for reinforced cement concrete work (form work and
2.2.1. reinforcement will be measured and paid separately)
(I) Using Mixer Machine
(A) In substructure up to plinth level
b) M20 grade concrete or Prop. 1:1.5:3 217.56 6063.65 ₹1,319,207.69 cu-m

8
Brick work in cement morter with 1st class brick including racking out joints
4.1.4. and curing complete as directed.
(I) In Sub-structureupto plinth level including dewatering if necessary
(b) In proportion 1:4. 85.888 5860.86 ₹503,377.54 cu-m

9
Earth/ sand filling in plinth in layers not more than 150mm thick including
necessary carriage, watering, ramming etc. complete as directed and
specified including payment of land compensation, forest royalty, sales tax
1.3. and other duties and taxes as may be necessary.
(c) With river sand or silt (predominantly non plastic) by truck carriage
including loading and unloading. 661.5 345.61 ₹228,621.02 cu-m

10
Pre construction anti - termite treatment in the back fill in immediate contact
with the foundation structure after completion, column, wall etc. to a depth of
450mm and width 300mm (when required refill in 200mm thick layers)
applying the emulsion @ 5 (five) litres per square meter towards the concrete
and masonry walls so as to ensure earth in contact with the structure well
treated - with chemical (supplying of necessary tools and accessories by the
26.1.2. contractor) as per the direction of the Department complete.
a) with aqueous emulsion having concentration 1:19 with chloropirophose
solution (tricel or euivalent) and water, i.e. 1% solution. 630 77.09 ₹48,566.70 sq-m

11
2.1.3.
Providing and laying 25mm thick damp proof coursewith cement concrete in
prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including
providing approved damp proof admixture in proportion as recommended by
the manufacturer including curing etc. complete as directed. 54.12 181.99 ₹9,849.30 sq-m

12
Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to
6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1
cement : 3 coarse sand) jointed with neat white cement slurry mixed with
pigment to match the shades of tiles including rubbing and polishing complete
5.6.4. with tiles of any approved shade/shades.
(a) Using white cement 124 1270.65 ₹157,560.60 sq-m

PART [1]
TOTAL ₹4,200,780.10

[2] GROUND FLOOR

1
Supplying, fitting and fixing in position reinforcement bars conforming to
relevant I.S. Code for R.C.C. work/ R.B. walling including straightening,
cleaning, cutting and bending to proper shapes and length as per details,
supplying and binding with 20G annealed black wire and placing in position
with proper blocks, supports, chairs, spacers etc. complete.
(No extra measurement for lap, hook, chair, anchor etc. will be entertained in
18.1.1. the measurement as they are included in the rate) (Upto 1st floor level)
a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam
steel/RINL
(i) TMT Corrosion resistant steel(CRS)reiforcement bar 190.004 7158.9 ₹1,360,219.64 Qtl

2
Providing form work of ordinary timber planking so as to give a rough finish
including centering, shuttering, strutting and propping etc., height of propping
and centering below supporting floor to ceiling not exceeding 4.0M and
3.1.1. removal of the same for in-situ reinforced concrete and plain concrete work in:

3.1.1.3. Columns, Pillars, Posts & Strut

(i) Using 38mm thick plank 424.56 394.81 ₹167,620.53 sq-m
 Sides and Soffits of Beams, beam haunchings, cantilever girders,
3.1.1.4. bressumers, lintels and horizontal ties.
(i) Using 38mm thick plank 243.9 212.37 ₹51,797.04

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever

3.1.1.5. slabs, chajjas, balconies and the like.
(a) Floors etc. upto 200mm in thickness.
(i) Using 38mm thick plank 756.3 452.94 ₹342,558.52

3.1.1.9. Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc.
(i) Using 38mm thick plank 108.3 466.24 ₹50,493.79

Staircase with sloping or stepped soffits including risers and stringers but
3.1.1.10. excluding Landing. (Using 38mm thick plank) 60.42 496.8 ₹30,016.66

3
Providing and laying plain/reinforced cement croncrete works cement, coarse
sand & 20mm down graded stone aggregate including dewatering if
necessary, and curing complete but excluding cost of form work and
reinforcement for reinforced cement concrete work (form work and
2.2.1 reinforcement will be measured and paid separately)
(I) Using Mixer Machine
(B) In super structure from plinth level up to 1st floor level.
ii) Columns, pillars, posts,struts, suspended floor, roof, landing, shelf and
support, balcony, lintel, sill band, beam, girder, bressumer, cantilever,
staircase (except spiral staircase and landing ) including preparing the top
surface and finishing of nosing.
N) Without using admixture, plasticiser
b) M20 grade concrete or Prop. 1:1.5:3 177.576 6331.46 ₹1,124,315.34 cu-m

4
1st class brick nogged wall in cement mortar including racking out joints and
curing complete as directed in super structure above plinth up to 1st floor level
(protruding M.S rod/Tor steel of column to be embeded in cement mortar and
4.1.8. will be measured and paid separately)
(A) 112mmthick brick wall
(a) In cement mortar in proportion 1:4.
(1 cement:4 sand) 798.45 653.01 ₹521,395.83 sq-m

5
Providing solingin foundation and under floor with stone/ best quality picked
jhama brick, sand packed and laid to level and in panel after preparing the
subgrade as directed including all labour and materials and if necessary
4.1.1. dewatering, complete.
(a).Brick on flat soling. 724.5 368.71 ₹267,130.40 sq-m

6
Plain cement concrete floor base in prop1:3:6 laid in alternate bays as
specified with coarse agg. of size 13mm to 32mm including dewatering if
2.1.2. necessary, and curing etc. complete.
b) 50mm thick 661.5 253.28 ₹167,544.72 sq-m

7
20 mm thick Cement plasterin two coats on single or half brick walls for
interior plastering up to 1st floor level including arises, internal rounded
angles,chamfers and / or rounded angles not exceeding 80mm in girth and
6.2.3. finished even and smooth including curing complete as directed.
b) In cement mortar 1:4 2481.79 183.86 ₹456,301.91 sq-m

8
Providing, fitting and fixing anodised aluminium sliding windows and
ventilators of standard sections of approved brand without horizontal glazing
bars, joints mitred and welded (manufactured to relevant IS specifications)
and providing and fixing handles, angle cleat, rubber gasket, roller, bolting
device, locking arrangements, screws etc as required complete as specified
11.1.2. and directed for all levels.
(b)3 Track sliding window
(iii)6mm coloured glass 104.1 4990.13 ₹519,472.53 sq-m

9
Providing, fitting and fixing M.S. grill of required patternfor windows/ clerestory
windows/ openingwith M.S. flats at required spacing in frame all round, squre
10.2. or round M.S. bars with round headed bolts and nuts or screws.
I . Plain grill
(c) Fixed to Brickwork/P.C.C/R.C.C. 1482.48 88.74 ₹131,555.28 kg
10
Providing, fitting and fixing anodised aluminuim framed glazed doors with
anodised aluminium frame made of 100mm x 45mm x 2.5mm section of
approved brand with door style of size 88mm x 45mm x 2.5mm, top rails
50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails
100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket
complete including hydraulic floor spring, pivot, tower bolt in each leaf,
aluminium door handle, lock, angles, cleat etc complete as specified and
11.2.1. directed by the department at all levels.
(ii) 5mm frosted glass 38.1 10461.07 ₹398,566.77 sq-m

11
Providing VITRIFIED floor tiles of approved quality of specified size, shape
and thickness not less than 18mm on floors, skirtings, risers and treads of
steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3
coarse sand ) including cutting where necessary finished with flush pointing
with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with
approved pigment to match shade of tiles, mixed with approved pigment to
match the shade of the tiles, complete at all levels as specified and directed.
(Coloured pigment should be in conformity with colour of tiles and as
5.7.2.1. approved and directed by the Department)
c) Delux range
Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make
i) Of size 1000mmx1000mm and above 567.3 2000 ₹1,134,600.00 sq-m

12
18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads
and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6
(1 cement : 6 coarse sand) laid and jointed with grey cement slurry including
rubbing and polishing complete with marble slab of specified quality and
5.9.1. shade at all levels.
(i) Marwat Slab 60 1891.07 ₹113,464.20 sq-m

13
Providing polished ceramic wall tilesof approved quality, size, shape and
thickness not less than 8mm on walls and skirtings over cement mortar bed
10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where
necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika /
Pedelite / Rouf) /white cement slurry mixed with approved pigment to match
shade of tiles complete at all levels as specified and directed. (Cement
plastering to be measured and paid separately). (Coloured pigment should be
in conformity with colour of tiles and as approved and directed by the
5.7.1.2 Department). (Walls means both interior and exterior walls).
b) Executive range
Somany/ Orient/Nitco/Asian Make
ii) Of size 250mmx350mm and above 273 855 ₹233,415.00 sq-m

14
18.9.1. Providing and fitting stainless steel (Gr 304) railing 255 582.31 ₹148,489.05 kg

15
Providing and fixing in position collapsible M.S. shutters with vertical channels
20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top
and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys
complete with bolts and nuts, locking arrangements, stoppers, handles
18.4.1. including applying a priming coat of red lead paint. 12 4245 ₹50,940.00 sq-m

16
Providing two coats of Birla White Wall Care Putty (Water Resistant White
Cement based putty for concrete/ mortar walls and ceiling both internal and
external) after removing all loosely adhering material from the wall surface
with the help of emery stone, putty blade or wire brush and moistening the
wall with sufficient quantity of clean water as specified and directed by the
13.3.4. department. (Total thickness of two coats is maximum 1.5mm)
(i) Thickness = 1.5 mm thick 2481.79 66.6 ₹165,287.21 sq-m

17
Wall painting (two coats) with acrylic emulsion paint approved brand and
manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on
new surface to give an even shade after throughly brushing the surfaces free
13.4.1. from mortar droppings and other foreign matter and sand papered smooth. 1737.25 71.17 ₹123,640.08 sq-m

18
Finishing old/new wall with water proofing weather coat smooth anti-fungal
exterior painting of approved make of Dulux (ICI) paint of required shade after
cleaning and clearing the surface etc. including scaffolding complete as
13.9.6. directed at all levels (two coats) 744.54 127.8 ₹95,152.21 sq-m

19
 Providing plinth protection with bricks flat laid in cement mortar 1: 4 and
finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of
19.2. neat cement finish. 134.1 665.72 ₹89,273.05 sq-m

20
Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed
over brick flat soling including 15mm thick cement plastering in prop. 1:3
finished with a floating coat of cement slurry as directed with necessary
shttering for sides and earth work in excavation of foundation trenches and
19.4. refilling the sides after completion of work etc. as specified.
ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial
depth of 100mm. 147 1093.04 ₹160,676.88 Rm

21
Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse
sand) finished with a floating coat of neat cement including rounding of
5.1.10. junctions with floor.
(b) 20 mm thick 112.5 265.7 ₹29,891.25 sq-m

PART [2]
TOTAL ₹7,933,817.90

[3] FIRST FLOOR

1
Supplying, fitting and fixing in position reinforcement bars conforming to
relevant I.S. Code for R.C.C. work/ R.B. walling including straightening,
cleaning, cutting and bending to proper shapes and length as per details,
supplying and binding with 20G annealed black wire and placing in position
with proper blocks, supports, chairs, spacers etc. complete.
(No extra measurement for lap, hook, chair, anchor etc. will be entertained in
18.1.1. the measurement as they are included in the rate) (Upto 1st floor level)
a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam
steel/RINL
(i) TMT Corrosion resistant steel(CRS)reiforcement bar 196.5 7158.9 ₹1,406,723.85 Qtl

Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above
18.1.2. first floor level. 196.5 37.75 ₹7,417.88

2
Providing form work of ordinary timber planking so as to give a rough finish
including centering, shuttering, strutting and propping etc., height of propping
and centering below supporting floor to ceiling not exceeding 4.0M and
3.1.1. removal of the same for in-situ reinforced concrete and plain concrete work in:

3.1.1.3. Columns, Pillars, Posts & Strut

(i) Using 38mm thick plank 168.36 394.81 ₹66,470.21 sq-m

Sides and Soffits of Beams, beam haunchings, cantilever girders,

3.1.1.4. bressumers, lintels and horizontal ties.
(i) Using 38mm thick plank 270.73 212.37 ₹57,494.93

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever

3.1.1.5. slabs, chajjas, balconies and the like.
(a) Floors etc. upto 200mm in thickness.
(i) Using 38mm thick plank 781.3 452.94 ₹353,882.02

3.1.1.9. Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc.
(i) Using 38mm thick plank 108.3 466.24 ₹50,493.79

Staircase with sloping or stepped soffits including risers and stringers but
3.1.1.10. excluding Landing. (Using 38mm thick plank) 60.42 496.8 ₹30,016.66

3
Providing and laying plain/reinforced cement croncrete works cement, coarse
sand & 20mm down graded stone aggregate including dewatering if
necessary, and curing complete but excluding cost of form work and
reinforcement for reinforced cement concrete work (form work and
2.2.1 reinforcement will be measured and paid separately)
(I) Using Mixer Machine
(B) In super structure from plinth level up to 1st floor level.
ii) Columns, pillars, posts,struts, suspended floor, roof, landing, shelf and
support, balcony, lintel, sill band, beam, girder, bressumer, cantilever,
staircase (except spiral staircase and landing ) including preparing the top
surface and finishing of nosing.
 N) Without using admixture, plasticiser
b) M20 grade concrete or Prop. 1:1.5:3 179.409 6331.46 ₹1,135,920.91 cu-m

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part
2.2.3. thereof above the 1st floor level. 179.409 306.19 ₹54,933.24

4
1st class brick nogged wall in cement mortar including racking out joints and
curing complete as directed in super structure above plinth up to 1st floor level
(protruding M.S rod/Tor steel of column to be embeded in cement mortar and
4.1.8. will be measured and paid separately)
(A) 112mmthick brick wall
(a) In cement mortar in proportion 1:4.
(1 cement:4 sand) 838.37 653.01 ₹547,463.99 sq-m

Extra for brick walling for each subsequent floor or part thereof above the 1st
4.1.14. floor level.
(a) 112mm thick brick/ R.B wall 838.37 29.09 ₹24,388.18

5
Plain cement concrete floor base in prop1:3:6 laid in alternate bays as
specified with coarse agg. of size 13mm to 32mm including dewatering if
2.1.2. necessary, and curing etc. complete.
b) 35mm thick 678.9 193.9 ₹131,638.71 sq-m

6
20 mm thick Cement plasterin two coats on single or half brick walls for
interior plastering up to 1st floor level including arises, internal rounded
angles,chamfers and / or rounded angles not exceeding 80mm in girth and
6.2.3. finished even and smooth including curing complete as directed.
b) In cement mortar 1:4 2480.77 183.86 ₹456,114.37 sq-m

7
Providing, fitting and fixing anodised aluminium sliding windows and
ventilators of standard sections of approved brand without horizontal glazing
bars, joints mitred and welded (manufactured to relevant IS specifications)
and providing and fixing handles, angle cleat, rubber gasket, roller, bolting
device, locking arrangements, screws etc as required complete as specified
11.1.2. and directed for all levels.
(b)3 Track sliding window
(iii)6mm coloured glass 104.1 4990.13 ₹519,472.53 sq-m

8
Providing, fitting and fixing M.S. grill of required patternfor windows/ clerestory
windows/ openingwith M.S. flats at required spacing in frame all round, squre
10.2. or round M.S. bars with round headed bolts and nuts or screws.
I . Plain grill
(c) Fixed to Brickwork/P.C.C/R.C.C. 1498.89 88.74 ₹133,011.50 kg

9
Providing, fitting and fixing anodised aluminuim framed glazed doors with
anodised aluminium frame made of 100mm x 45mm x 2.5mm section of
approved brand with door style of size 88mm x 45mm x 2.5mm, top rails
50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails
100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket
complete including hydraulic floor spring, pivot, tower bolt in each leaf,
aluminium door handle, lock, angles, cleat etc complete as specified and
11.2.1. directed by the department at all levels.
(ii) 5mm frosted glass 37.2 10461.07 ₹389,151.80 sq-m

10
Providing VITRIFIED floor tiles of approved quality of specified size, shape
and thickness not less than 18mm on floors, skirtings, risers and treads of
steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3
coarse sand ) including cutting where necessary finished with flush pointing
with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with
approved pigment to match shade of tiles, mixed with approved pigment to
match the shade of the tiles, complete at all levels as specified and directed.
(Coloured pigment should be in conformity with colour of tiles and as
5.7.2.1. approved and directed by the Department)
c) Delux range
Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make
i) Of size 1000mmx1000mm and above 584.4 2000 ₹1,168,800.00 sq-m

11
 18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads
and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6
(1 cement : 6 coarse sand) laid and jointed with grey cement slurry including
rubbing and polishing complete with marble slab of specified quality and
5.9.1. shade at all levels.
(i) Marwat Slab 60 1891.07 ₹113,464.20 sq-m

12
Providing polished ceramic wall tilesof approved quality, size, shape and
thickness not less than 8mm on walls and skirtings over cement mortar bed
10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where
necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika /
Pedelite / Rouf) /white cement slurry mixed with approved pigment to match
shade of tiles complete at all levels as specified and directed. (Cement
plastering to be measured and paid separately). (Coloured pigment should be
in conformity with colour of tiles and as approved and directed by the
5.7.1.2 Department). (Walls means both interior and exterior walls).
b) Executive range
Somany/ Orient/Nitco/Asian Make
ii) Of size 250mmx350mm and above 282 855 ₹241,110.00 sq-m

13
18.9.1. Providing and fitting stainless steel (Gr 304) railing 255 582.31 ₹148,489.05 kg

14
Providing two coats of Birla White Wall Care Putty (Water Resistant White
Cement based putty for concrete/ mortar walls and ceiling both internal and
external) after removing all loosely adhering material from the wall surface
with the help of emery stone, putty blade or wire brush and moistening the
wall with sufficient quantity of clean water as specified and directed by the
13.3.4. department. (Total thickness of two coats is maximum 1.5mm)
(i) Thickness = 1.5 mm thick 2480.77 66.6 ₹165,219.28 sq-m

15
Wall painting (two coats) with acrylic emulsion paint approved brand and
manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on
new surface to give an even shade after throughly brushing the surfaces free
13.4.1. from mortar droppings and other foreign matter and sand papered smooth. 1736.54 71.17 ₹123,589.55 sq-m

16
Finishing old/new wall with water proofing weather coat smooth anti-fungal
exterior painting of approved make of Dulux (ICI) paint of required shade after
cleaning and clearing the surface etc. including scaffolding complete as
13.9.6. directed at all levels (two coats) 744.23 127.8 ₹95,112.59 sq-m

PART [3]
TOTAL ₹7,420,379.26

[4] SECOND FLOOR

1
Supplying, fitting and fixing in position reinforcement bars conforming to
relevant I.S. Code for R.C.C. work/ R.B. walling including straightening,
cleaning, cutting and bending to proper shapes and length as per details,
supplying and binding with 20G annealed black wire and placing in position
with proper blocks, supports, chairs, spacers etc. complete.
(No extra measurement for lap, hook, chair, anchor etc. will be entertained in
18.1.1. the measurement as they are included in the rate) (Upto 1st floor level)
a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam
steel/RINL
(i) TMT Corrosion resistant steel(CRS)reiforcement bar 163.078 7158.9 ₹1,167,459.09 Qtl

Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above
18.1.2. first floor level. 163.078 75.5 ₹12,312.39

2
Providing form work of ordinary timber planking so as to give a rough finish
including centering, shuttering, strutting and propping etc., height of propping
and centering below supporting floor to ceiling not exceeding 4.0M and
3.1.1. removal of the same for in-situ reinforced concrete and plain concrete work in:

3.1.1.3. Columns, Pillars, Posts & Strut

(i) Using 38mm thick plank 140.58 394.81 ₹55,502.39 sq-m

Sides and Soffits of Beams, beam haunchings, cantilever girders,

3.1.1.4. bressumers, lintels and horizontal ties.
(i) Using 38mm thick plank 226.06 212.37 ₹48,008.36
 Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever
3.1.1.5. slabs, chajjas, balconies and the like.
(a) Floors etc. upto 200mm in thickness.
(i) Using 38mm thick plank 652.39 452.94 ₹295,493.53

3.1.1.9. Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc.
(i) Using 38mm thick plank 64.92 466.24 ₹30,268.30

Staircase with sloping or stepped soffits including risers and stringers but
3.1.1.10. excluding Landing. (Using 38mm thick plank) 60.42 496.8 ₹30,016.66

3
Providing and laying plain/reinforced cement croncrete works cement, coarse
sand & 20mm down graded stone aggregate including dewatering if
necessary, and curing complete but excluding cost of form work and
reinforcement for reinforced cement concrete work (form work and
2.2.1 reinforcement will be measured and paid separately)
(I) Using Mixer Machine
(B) In super structure from plinth level up to 1st floor level.
ii) Columns, pillars, posts,struts, suspended floor, roof, landing, shelf and
support, balcony, lintel, sill band, beam, girder, bressumer, cantilever,
staircase (except spiral staircase and landing ) including preparing the top
surface and finishing of nosing.
N) Without using admixture, plasticiser
b) M20 grade concrete or Prop. 1:1.5:3 149.807 6331.46 ₹948,497.03 cu-m

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part
2.2.3. thereof above the 1st floor level. 149.807 612.38 ₹91,738.81

4
1st class brick nogged wall in cement mortar including racking out joints and
curing complete as directed in super structure above plinth up to 1st floor level
(protruding M.S rod/Tor steel of column to be embeded in cement mortar and
4.1.8. will be measured and paid separately)
(A) 112mmthick brick wall
(a) In cement mortar in proportion 1:4.
(1 cement:4 sand) 730.7 653.01 ₹477,154.41 sq-m

Extra for brick walling for each subsequent floor or part thereof above the 1st
4.1.14. floor level.
(a) 112mm thick brick/ R.B wall 730.7 58.18 ₹42,512.13

5
Plain cement concrete floor base in prop1:3:6 laid in alternate bays as
specified with coarse agg. of size 13mm to 32mm including dewatering if
2.1.2. necessary, and curing etc. complete.
b) 35mm thick 540 193.9 ₹104,706.00 sq-m

6
20 mm thick Cement plasterin two coats on single or half brick walls for
interior plastering up to 1st floor level including arises, internal rounded
angles,chamfers and / or rounded angles not exceeding 80mm in girth and
6.2.3. finished even and smooth including curing complete as directed.
b) In cement mortar 1:4 2071.44 183.86 ₹380,854.96 sq-m

7
Providing, fitting and fixing anodised aluminium sliding windows and
ventilators of standard sections of approved brand without horizontal glazing
bars, joints mitred and welded (manufactured to relevant IS specifications)
and providing and fixing handles, angle cleat, rubber gasket, roller, bolting
device, locking arrangements, screws etc as required complete as specified
11.1.2. and directed for all levels.
(b)3 Track sliding window
(iii)6mm coloured glass 86.924 4990.13 ₹433,762.06 sq-m

8
Providing, fitting and fixing M.S. grill of required patternfor windows/ clerestory
windows/ openingwith M.S. flats at required spacing in frame all round, squre
10.2. or round M.S. bars with round headed bolts and nuts or screws.
I . Plain grill
(c) Fixed to Brickwork/P.C.C/R.C.C. 1229.09 88.74 ₹109,069.45 kg

9
 Providing, fitting and fixing anodised aluminuim framed glazed doors with
anodised aluminium frame made of 100mm x 45mm x 2.5mm section of
approved brand with door style of size 88mm x 45mm x 2.5mm, top rails
50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails
100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket
complete including hydraulic floor spring, pivot, tower bolt in each leaf,
aluminium door handle, lock, angles, cleat etc complete as specified and
11.2.1. directed by the department at all levels.
(ii) 5mm frosted glass 30.876 10461.07 ₹322,996.00 sq-m

10
Providing VITRIFIED floor tiles of approved quality of specified size, shape
and thickness not less than 18mm on floors, skirtings, risers and treads of
steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3
coarse sand ) including cutting where necessary finished with flush pointing
with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with
approved pigment to match shade of tiles, mixed with approved pigment to
match the shade of the tiles, complete at all levels as specified and directed.
(Coloured pigment should be in conformity with colour of tiles and as
5.7.2.1. approved and directed by the Department)
c) Delux range
Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make
i) Of size 1000mmx1000mm and above 540 2000 ₹1,080,000.00 sq-m

11
18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads
and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6
(1 cement : 6 coarse sand) laid and jointed with grey cement slurry including
rubbing and polishing complete with marble slab of specified quality and
5.9.1. shade at all levels.
(i) Marwat Slab 48 1891.07 ₹90,771.36 sq-m

12
Providing polished ceramic wall tilesof approved quality, size, shape and
thickness not less than 8mm on walls and skirtings over cement mortar bed
10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where
necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika /
Pedelite / Rouf) /white cement slurry mixed with approved pigment to match
shade of tiles complete at all levels as specified and directed. (Cement
plastering to be measured and paid separately). (Coloured pigment should be
in conformity with colour of tiles and as approved and directed by the
5.7.1.2 Department). (Walls means both interior and exterior walls).
b) Executive range
Somany/ Orient/Nitco/Asian Make
ii) Of size 250mmx350mm and above 225.6 855 ₹192,888.00 sq-m

13
18.9.1. Providing and fitting stainless steel (Gr 304) railing 255 582.31 ₹148,489.05 kg

14
Providing two coats of Birla White Wall Care Putty (Water Resistant White
Cement based putty for concrete/ mortar walls and ceiling both internal and
external) after removing all loosely adhering material from the wall surface
with the help of emery stone, putty blade or wire brush and moistening the
wall with sufficient quantity of clean water as specified and directed by the
13.3.4. department. (Total thickness of two coats is maximum 1.5mm)
(i) Thickness = 1.5 mm thick 1984.62 66.6 ₹132,175.69 sq-m

15
Wall painting (two coats) with acrylic emulsion paint approved brand and
manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on
new surface to give an even shade after throughly brushing the surfaces free
13.4.1. from mortar droppings and other foreign matter and sand papered smooth. 1389.23 71.17 ₹98,871.50 sq-m

16
Finishing old/new wall with water proofing weather coat smooth anti-fungal
exterior painting of approved make of Dulux (ICI) paint of required shade after
cleaning and clearing the surface etc. including scaffolding complete as
13.9.6. directed at all levels (two coats) 595.39 127.8 ₹76,090.84 sq-m

17
Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic
tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc.
followed by power washing for making the surface absolutely free from any
foreign particles like dust, oil, grease etc. and allowing surface to dry complete
22.1.1. as directed at all levels. 647 26.78 ₹17,326.66 sq-m

18
 Doing patch work in existing roof slab wherever necessary by laying cement
sand mortar (prop.1:4) admixed with mortar modifier cum bonding agent
Nitobond SBR of Fosroc Chemicals/Rheomix 141 of BASF/Dr. Sealkit Master
Bond Latex (Asian Chemicals) @ 3Ltrs per bag of cement after applying with
brush a priming coat of Nitobond SBR/Rheomix 141 of BASF/Dr. Sealkit
Master Bond Latex (Asian Chemicals) @ 3.5sq.m. per litre as specified &
directed by the Department complete after proper surface preparation
(surface preparation including thorough cleaning of surface to be measured
22.1.5. and paid separately). 647 692.72 ₹448,189.84 sq-m

PART [4]
TOTAL ₹6,835,154.50

SUB TOTAL
(CIVIL
WORKS) ₹26,390,131.75

[B] WATER SUPPLY AND SANITARY WORKS

Quantity Rate
Item No Code Particulars (Units) (Rs/Unit) Amount Total Remarks

1
Providing fitting and fixing vitreous china pedestal type water closet
(European type W.C pan 400mm high ) with seat and lead ,CP brass hinges
and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings
including painting of fittings and brackets, required. (Flushing Cistern to be
1.2. paid separately)
A) Parryware make
b) Coloured
(i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat
cover) 11 6359.27 ₹69,951.97

2
Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI
brackets including fitting and fixing standard size CP flush pipe, union clamps
1.5. etc. compete as directed and specified (pipes will be measured separately)
i) Parryware make
b) Coloured
(ii) Deluxe Single Flush (Cat. No. C8091/C8057) 11 2739.26 ₹30,131.86

3
Providing fitting and fixing vitreous china flat back type lipped front urinal
basin with standard flush pipe and CP brass spreader andbrass unions, etc.
complete including painting of fittings and brackets, cutting and making good
1.8. the walls & floors wherever required.
(A) Parryware Make
(a) White
(i) New Magnum (Cat. No.C0575) 18 5611.35 ₹101,004.30

4
Providing fitting and fixing vitreous china squatting plate urinal with automatic
flushing cistern with standard flush pipe and CP brass spreader andbrass
unions, etc. complete including painting of fittings and brackets, cutting and
1.9. making good the walls & floors wherever required.
(A) Parryware Make
(ii) Coloured (Cat. No.C0573) 6 3923.98 ₹23,543.88

5
Supplying fiting and fixing vitreous china division plate including fitting and
1.11. fixing compete as directed and specified.
(i) Parryware Make
(b) Coloured
(i) Partion Magnum / Large (Cat. No.C0571/07) 13 2750.55 ₹35,757.15

6
Providing vitreous China wash basin with CI/MS brackets, C.P brass chain
with plug,PVC waste pipe including painting of fittings and brackets, cutting
and making good the walls wherever required. (Pillar cock, stop cocks, waste
1.13.1. coupling are to be paid separately)
PEDESTAL BASIN (with pedestal)
(B) Hindware Make
(b) Coloured
(i) CEDER 570 x 440 (Cat. No.91049/91115) 12 8463.06 ₹101,556.72
7
Providing fitting & fixing laboratory sink of Parryware make with CI/MS
brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete
including painting the fittings ,cutting &making good the walls wherever
1.16. required. (Sink cock, stop cocks, waste coupling are to be paid separately.
(B) Hindware make
(a) White
(ii) Size 450 x 300 x 180 (Cat.No.50001) 6 4976.85 ₹29,861.10

8
Providing fitting and fixing Decorative Mirror complete as directed and
1.19. specified.
(A) Parryware Make
(a) Size 800mm x 600mm 12 3417.43 ₹41,009.16

9
Providing, fitting and fixing Liquid soap dispenser and liquid soap container
1.23. complete as directed and specified.
(i) Jaquar Make
(b) Continental (Cat.No.ACN-1137N) (with mettalic bottle) 12 1599.16 ₹19,189.92

10
1.24. Providing, fitting and fixing CP towel rail complete as directed and specified.
(a) Jaquar make
(i) Continental 300mm for wash basin (Cat.No. ACN-1101N) 12 1538.56 ₹18,462.72

11
Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other
ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary
1.37.1 complete at all levels including below G.L as directed and specified.
b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good
to the damages.
R-m
(i) 160mm dia. 147 1322.57 ₹194,417.79

(iii) 90mm dia. 142 499.07 ₹70,867.94

(v) 63 mm dia. 250 300.22 ₹75,055.00

12
Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or
other ISI approved including joining ,fitting and fixing etc.as necessary
1.37.2. complete at all levels including below G.L as directed and specified.
b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good
to the damages.

(i) 160mm 47 602.93 ₹28,337.71

(iii) 90mm dia. 117 327.02 ₹38,261.34

(iv) 75 mm dia. 187 261.62 ₹48,922.94

13
Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other
ISI approved including joining, fitting and fixing etc. as necessary complete at
1.37.5. all levels including below G.L. as directed and specified.
a) In exposed surfaces or in trenches.
(iii) 90mm dia. 25 268.3 ₹6,707.50

14
1.42. Providing fiting & fixing C.P. Grating complete as directed and specified.
(i) 160mm dia 101 303.62 ₹30,665.62

15
Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and
1.46. frame of 58 Kg. weight complete as directed and specified. 11 4097.75 ₹45,075.25

16
Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R'
brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer,
nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels
3.1.1. including below G.L. as directed and specified.
(B) Concealedby chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and
making good to the damaged structure.
 a) 50 mm dia (Medium)
i) Using Tata make 132 590.29 ₹77,918.28 R-m

d) 25 mm dia (Medium)
i) Using Tata make 108 381.38 ₹41,189.04

f) 15 mm dia (Medium)
i) Using Tata make 345 278.46 ₹96,068.70

17
Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand
3.2.1. directed and specified. (G.I. & C.P pipes will be measured separately)
Sona brand
(i) Bib Cock ( Code.No.RG-5015) 72 976.23 ₹70,288.56

18
Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand
as directed and specified. (G.I. & C.P pipes will be measured and paid
3.6.1. separately)
Sona brand
b) Sink cock J spout 12 1507.6 ₹18,091.20

19
Supplying fitting and fixing stop-cock of approved brand of size as mentioned
below and directed and specified (G.I. & C.P. pipes will be measured and paid
3.3.1. separately)
I) Brass stop cock (heavy) of Sant make
(i)15mm dia 56 215.13 ₹12,047.28

20
Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as
3.17.1 specified and directed.

a) 50mm dia 6 2901.59 ₹17,409.54

c) 25 mm dia. 12 1038.32 ₹12,459.84

21
Construction of filter bed in soak pit including earth work in excavation of soil
and then filling up of the trench with brick bats/Charcoal covered with earth
over a layer of A.C. plain sheet above brick bat filling complete as directed.
(sizes of soak pit may vary depending on the sizes and capacities of the
1.51. septic tank as well as the number of users as mentioned in the table. 4.3 3810.06 ₹16,383.26

22
Construction of inspection pit inside measurement 450mm x450mm x450mm
flush with 100mm diameter HCI/PVC pipes and cement concrete base in
proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in
proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall
and floor. 450mm x450mm air tight C.I. inspection pit cover and frame
complete including supplying of materials, necessary excavation of pit as
1.52. directed. 7 3351.02 ₹23,457.14

23
Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of
Sintex / Polycon / Patton make over the stagging with manhole cover with
locking and cleaning arrangement including providing pads of size as required
5.4.2. for inlet and outlet pipes
2000 Lt capacity
(a) Sintex make 4 13685 ₹54,740.00

SUB TOTAL
(WS &
SANITATION
WORKS) ₹1,448,832.71

[C] ELCTRICAL WORKS

Quantity Rate
Item No Code Particulars (Units) (Rs/Unit) Amount Total Remarks
1
 Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single
core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990
with flexible bright annealed electrolytic copper conductor for voltage grade up
to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as
approved by the Deptt.) in surface/ recessed conduit wiring system with
20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG
/ Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the
Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold
medal /Kolor kany.Kom/Havells or equivalent make as approved by the
Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover
,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or
2.1. equivalent make as approved by the Deptt.) etc. complete

2.1.2 Medium point up to 6.00 metre. Length. 73 916 ₹66,868.00

2.1.3 Long point up to 10.00 metre. Length. 317 1306 ₹414,002.00

2
Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single
core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990
with flexible bright annealed electrolytic copper conductor for voltage grade up
to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as
approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI
marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto
Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring
system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch
(Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as
approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic
laminated sheet cover including earth continuity with 1.5 sq. mm. cable to
2.2. third pin of the plug socket etc. as required complete, when placed elsewhere.

2.2.3 Long point up to 10.00 metre. Length. 200 1431 ₹286,200.00

3
Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core
unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with
flexible bright annealed electrolytic copper conductor for voltage grade up to
1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as
approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta
/Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the
Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor
kany.Kom/Havells or equivalent make as approved by the Deptt.)make)
earthing the 3rd pin of the socket as required on the switch board in surface/
recessed P.V.C. conduit wiring system. When fitted on same board of light
2.10. and fan. 84 135 ₹11,340.00

4
Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated
single core unsheathed industrial (Multistrand) cable FR conforming to IS-694:
1990 with flexible bright annealed electrolytic copper conductor for voltage
grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make
as approved by the Deptt.) in surface/ recessed conduit wiring system
including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps
flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or
equivalent make as approved by the Deptt./ Havells make), GI/ MS switch
board (I.S.I. mark with phenolic laminated sheet cover earth continuity with
2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20
mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC
conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent
2.4. make as approved by the Deptt.)

2.4.1 Extra long point up to 15.00 metre. length. 180 2999 ₹539,820.00
2.4.3 Extra long point up to 25.00 metre. Length. 29 5443 ₹157,847.00

5
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed
industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible
bright annealed electrolytic copper conductor for voltage grade up to 1100
volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by
the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or
equivalent make as approved by the Deptt.) including earth continuity in
surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART -
2.7. III rigid PVC conduit wiring system.

With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. Unit-
2.7.1 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. 900 188 ₹169,200.00 meters
With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia.
2.7.2 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. 700 237 ₹165,900.00

6
 Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed
industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible
bright annealed electrolytic copper conductor for voltage grade up to 1100
volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by
the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI
marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto
Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring
2.9. system.

With 4x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in 32 mm. dia. Unit-
2.9.3 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. 300 506 ₹151,800.00 meters
With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia.
2.9.4 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. 250 782 ₹195,500.00

7
Supplying including installation, commissioning of vermin and dust proof totally
enclosed cubical indoor type floor/wall mounting compartmentalize panel board of
size 0.90M X 1.25MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X
35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2
coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to
be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete
neatly Wiring done with provision for one no 315A 4pole MCCB or Switch Fuse Unit
as incomer and provision for 4nos DP or TPN out going as specified and directed by
17.9. the deptt. confirming to IP 43 protection comprising of the following electrical items:
1. 30mm X 5mm 4 strip copper Bus - Bar 1.20 M length each
i 20mm X 3mm 4 strip copper Bus-Bar 0.5M each 4 sets
2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no
3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no
4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no
5. Voltmeter & Ammeter Selector Switch - 2 no
6. 2 A Slide fuse unit - 3nos
(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid
separately) 1 32062 ₹32,062.00

8
Supplying including installation, commissioning of vermin and dust proof totally
enclosed cubical indoor type floor/wall mounting compartmentalize panel board of
size 1.25M X0.6MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X
35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2
coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to
be erected in 1 : 3 : 6 PCC foundation and brick soling / grouting etc. complete neatly
Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as
incomer and provision for 2nos DP or TPN out going as specified and directed by the
17.1. deptt. confirming to IP 43 protection comprising of the following electrical items:
1. 20mm X 3mm 4 strip copper Bus-Bar 0.5M length each
2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no
3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no
4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no
5. Voltmeter & Ammeter Selector Switch - 2 no
6. 2 A Slide fuse unit - 3nos
(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid
separately) 2 23269 ₹46,538.00

9
Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz
4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following
capacity complete with making necessary connection as approved, specified and
16.42. directed by the deptt.

16.42.1. 35/36 KA 415V 50 Hz 4P MCCB

3 (C&S, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.)
315A 1 28985 ₹28,985.00

10
Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P
MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity
complete with making necessary connection as approved by the Deptt.),as specified
16.40. and directed by the deptt.

16.40.1. 25 KA 415V 50 Hz 3P MCCB

7 (Havells, HPL, Indo Asian make)
125A 4 8436 ₹33,744.00

11
 Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following
capacity complete with making necessary connection as approved, specified and
16.35. directed by the deptt.

B Series
16.35.1. (Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as
3 approved by the Deptt.)
63A 6 1833 ₹10,998.00

12
Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the
following capacity complete with making necessary connection as approved,
16.1 specified and directed by the deptt.

C Series
16.1.2.1 (Schneider MG, legrand, Hager make)
6 to 32A 78 231 ₹18,018.00

13
Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust &
vermin proof Double door IP-43 double door surface mounting TPN MCB DB
incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with
grouting nuts & bolts as reqd. complete with making necessary connection as
15.16. approved, specified and directed by the deptt.

15.16.1.
1 Richa, Bentec, Adhunic, V-Guard make)
4 way TPN (4+12) double door 6 2743 ₹16,458.00

14
Supplying with fitting and fixing Four Pole 415V Front handle operated open
execution On Load Change over switch fitted on the existing cubical panel of the
following capacity complete with making necessary connection as approved,
16.45. specified and directed by the deptt.

16.45.1.
6 C&S, Havells, Indo Asian, HPL, GECO make)
320A 1 18958 ₹18,958.00

15
Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3
mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe
with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing
socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I.
hinged cover plate complete with digging of earth pit, construction of brick chamber
and plastering of both inner & outer surface of wall as specified and directed by the
22.10. deptt . 2 13218 ₹26,436.00

16
Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all
accessories such as ballast, starter etc. directly on wall / ceiling including connection
as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C. copper conductor as
23.1. required and as directed by the department.

Sleek Extruded Aluminium Channel type luminaries complete with ribbed extruded
diffuser & aqua coloured flushed end caps and Electronic ballast with 1 X 18 watt
Fluorescent tube.(Crompton Greaves make) Model- DZL18EB DAZZLE with Power Lux
23.1.9 Lamp or equivalent ) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make. 180 1241 ₹223,380.00

17
Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle
holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and
11.26. directed by the deptt. 20 227 ₹4,540.00

18
Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor
kany.kom/Havells or equivalent make as approved by the Deptt.) including
11.10. connection as approved by the Deptt.)as required Without Lamp 20 55 ₹1,100.00

19
Supplying and fixing of 250/305 mm dia (Nominal size flush type circular ceiling
fittings complete with holder, Aluminium anodized back plate and brass holder, 20
11.22. Watt CFL lamp including connection as approved by the Deptt.)as required. 44 705 ₹31,020.00

20
 Supplying with installation testing and commissioning of Hi -- wall 4 STAR rating non
ducted split type air conditioner of the following capacity with cordless remote
complete with indoor and outdoor unit, copper pipe and electrical connection as
approved by the Deptt.)up to 5 m between the room unit and out door unit as
29.1. directed by the department.

29.1.3.1 2 Ton capacity

(Carrier make) estrella R410 36 57659 ₹2,075,724.00

21
Supplying with fitting and fixing Voltage stabilizer of the following specification
complete including making necessary connection as approved, specified and
directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS
31.1. make)

31.1.8 5.0 KVA Automatic Input 90-280 V Out put 200-240 V 36 9350 ₹336,600.00

22
Supplying with fitting and fixing Single Phase D.O.L Starter of the following
specification complete including making necessary connection as approved, specified
30.11. and directed by the deptt.

30.11.1 Overload Relay Range 3.8 - 6.0 Amps for 2.2 KW 36 2340 ₹84,240.00

23
Supplying including installation of Inverter (Su-Kam/ Microtech/ V-Guard/ Luminous)
SB.16. with Battery and its case as per direction and specified by the Deptt.

SB.
16.1.3 Sine wave Inverter 1400 VA/240 V 6 53131 ₹318,786.00

24
Supplying including installation, testing and commissioning of Air/Water Cooled
Diesel Generator set coupled to suitable alternator of 220/415 V, AC, 1/3-Phase 0.8
p.f.(la mounted on a 1) M.S. Fabricated base frame.,2) M.S. fuel tank of required
capacity.,3) Residual Silencer.,4) AMF Control Panel.5) Suitable batteries with lead.,
5) First fill of lube oil.,6) Acoustic Enclosure complete with all accessories as specified
and directed by the department conforming to IS comprising the Technical
Specification.. as per manufacturer. (RANGE FROM 5 KVA TO 625 KV . Kirloskar
green/bliss, Leyland, Volvo Penta, Perkinson, Mahindra, Greaves, Escort engine and
41.2. Kirloskar, Stamford, Leroy somer or equivalent alternator.

41.2.1.2
3 KVA- PHASE- Approx size- Approx Wt - COOLING
30 3 3130x1100x1680 1440 Kg A/C 1 647402 ₹647,402.00

25
Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G
Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE
Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core
up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.
3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2
sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G.
cable laid in ground/partially in air (as required for termination over ground
including excavation of cable trench up to depth of 75cm, refilling, protective brick
covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper
place as specified and directed by the deptt. (Nicco/ Havells/
32.1. RPG/CCI/Polycab/Gloster/ Finolex make) .

32.1.4.5 4 Core A2XWY A2XFY

Unit-
25.00 Sq. mm.4 Core armoured U.G. cable 60 495 ₹29,700.00 meters
32.1.4.8 70.00 Sq. mm.4 Core armoured U.G. cable 90 880 ₹79,200.00

26
Supplying, installation testing and commissioning of the following rating copper
wound indoor / out door type transformer complete including the payment to be
made to power supply authority for supervision charge, labour charge, cost of L.T/H.
T metering etc. (excluding the cost of load security) and making necessary
arrangement for charging approval of the sub-station from the competent authority
as directed and specified by the department. Transformer should be as per CEA
guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above
35.1. 200KVA as per CEA guidelines for losses along with LV enclosure.

35.1.6 250 KVA,50Hz.11/0.433 KV. Oil filled transformer with Off Circuit tap change. 1 458236 ₹458,236.00
27
Unit-
Supplying including erection testing and charging of 3 phase 4 wire LT line 7.5 m PSC kilometer
36.40. pole using rabbit conductor. Average span 40m 0.2 644882 ₹128,976.40 s

28
Unit-
Supplying including erection testing and charging of 3 phase 33 KV line on 9.75 M kilometer
36.41. PSC pole AAA Raccoon conductor with channel cross arm, average span 75m 0.1 1209139 ₹120,913.90 s

29
Supplying including installation of 11KV CT/PT combine metering system
36.42. complete as required and directed by department. 1 75000 ₹75,000.00

30
Supplying installation, testing and commissioning of 10 passenger (680 Kg.)/ lifts
having contract speed of 1 MPS serving different floors in the lift shaft as per
SB.15.3. detailed specification enclosed and as under:
1. No. of Elevators 1 No.
2. Type Passenger Elevator
3. Capacity Passenger -10 Persons - 680 Kg
4. Speed 1.0 Metre/Sec (approx.)
5. Type of Drive Variable Voltage
Variable Frequency Drive with Microprocessor based Simplex Full Collective Control.
6. Location of Machine Room Top
7. Available Travel 10.8 Metres. ()maximum)
8. Serving Ground Floor to 3rd Floor
4 Stops 4 Levels 4 Openings
9. Well Size (Required)
1950 mm Wide x 2050 Deep over the finished surface
10. Power Supply
415 V three-phase 50 cycles AC
11. Auxiliary Required
Single-phase 220 V 50 cycles AC
12. Car Size (Clear Inside)
1300 mm Wide x 1350 mm Deep approx.
13. Required Pit Depth 1600 mm ()mandatory)
14. Required Head Room 4800 mm.
15. Car Enclosure Stainless Steel Car hairline finish
16. Flooring PVC Flooring
17. Electric Light Fluorescent Light Fittings
18. Fan 300 mm sweep 1 No.
19. No. of Entrances One Location - Front.
20. Car Entrance Centre opening stainless steel power door with vision panel
21. Landing Entrance
Centre opening stainless steel power door with vision panel
22. Clear Opening
800 mm Wide x 2000 mm High
23. Indicators: Car & Landings
Direction & Position Indicator
24. Other Features
Battery Operated Emergency Alarm and Light. Call registration LEDS . OSG Electronic
Switch. Fire drive. 2 Intercom System Full length
Infra-red Door Safety. Auto Rescue Device. 1 2323000 ₹2,323,000.00

31
Supplying installation, testing and commissioning of 8 passenger (544 Kg.)/ lifts
having contract speed of 1 MPS serving different floors in the lift shaft as per
SB.15.4. detailed specification enclosed and as under:
1. No. of Elevators 1 No.
2. Type Passenger Elevator
3. Capacity Passenger -8 Persons - 544 Kg
4. Speed 1.0 Metre/Sec (approx.)
5. Type of Drive Variable Voltage
Variable Frequency Drive with Microprocessor based Simplex Full Collective Control.
6. Location of Machine Room Top
7. Available Travel 11 Metres. ()maximum)
8. Serving Ground Floor to 3rd Floor
4 Stops 4 Levels 4 Openings
 9. Well Size (Required)
1850 mm Wide x 1850 Deep over the finished surface
10. Power Supply
415 V three-phase 50 cycles AC
11. Auxiliary Required
Single-phase 220 V 50 cycles AC
12. Car Size (Clear Inside
1300 mm Wide x 1100 mm Deep approx.
13. Required Pit Depth 1600 mm ()mandatory)
14. Required Head Room 4800 mm.
15. Car Enclosure painted Steel Car - Lx3
16. Flooring PVC Flooring
17. Electric Light Fluorescent Light Fittings
18. Fan 300 mm sweep 1 No.
19. No. of Entrances One Location - Front.
20. Car Entrance Centre opening stainless steel power door with vision panel
21. Landing Entrance
Centre opening stainless steel power door with vision panel
22. Clear Opening
800 mm Wide x 2000 mm High
23. Indicators: Car & Landings
Direction & Position Indicator
24. Other Features
Battery Operated Emergency Alarm and Light. Call registration LEDS . OSG Electronic
Switch. Fire drive. 2 Intercom System Full length
Infra-red Door Safety. Auto Rescue Device.
b) Stainless Steel Car hairline finish
1 2150000 ₹2,150,000.00

32
Non-
Schedul Load Security against 200KW load of entire building payable at APDCLas per
e norms , (L.S.) 1 700000 ₹700,000.00

SUB TOTAL
(ELECTRICA
L WORKS) ₹12,178,492.30

[D] FIRE FIGHTING WORKS

Quantity Rate
Item No Code Particulars (Units) (Rs/Unit) Amount Total Remarks

1
Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher
confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to
IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark
(Extinguisher will be TROLLEY MOUNTED).(50 KG)
29.2.4. BRAND : FIRESTOP / FIREND / FIRE SHIELD 15 32755.93 ₹491,338.95

SUB TOTAL
(FIRE
FIGHTING
WORKS) ₹491,338.95

[E] NON SCHEDULED ITEM

Quantity Rate
Item No Code Particulars (Units) (Rs/Unit) Amount Total Remarks

Providing and fixing High Pressure Laminated (H.P.L) sheets of best quality
1 as per specification and as directed by the Department. 215 4842 ₹1,041,030.00 sq-m

SUB TOTAL
(NON
SCHEDULED
) ₹1,041,030.00

[F] CONSTRUCTION OF APPROACH ROAD

 Quantity Rate
Item No Code Particulars (Units) (Rs/Unit) Amount Total Remarks

1
Earthwork in excavation for foundation trenches of walls, retaining walls,
footings of column, steps, septic tank etc. including refilling (return filling) the
quantity as necessary after completion of work, breaking clods in return filling,
dressing, watering and ramming etc. and removal of surplus earth with all lead
and lifts as directed and specified in the following classification of soils
1.1. including bailing out water where necessary as directed and specified.
(A) Up to a depth of 2.00m below the existing ground level.
(a) In ordinary soil 408 108.82 ₹44,398.56 cu-m

2
Plain cement concrete workswith coarse aggregate of sizes 13mm to 32mm in
foundation bed for footing steps, walls, brick works etc. as directed and
specified including dewatering if necessary, and curing complete (shuttering
2.1.1. where necessary shall be measured and paid separately).
(a) In prop 1cement: 3 sand :6 coarse aggregate by volume 19.65 4292.86 ₹84,354.70 cu-m

3
Stone masonary work in retaining wall, wing wall, abutment, foundation,
steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12
with both faces hammer dressed including bonding, providing face stone,
through stone and centering including racking of joints, curing and supplying
and all carriage of stone as directed including payment of forest royalty and
4.2.1. sales tax and carriage.
(b) Coarse Rubble Masonry 216.65 2672.81 ₹579,064.29 cu-m

4
Rural
Roads
2016-
2017
Sch 4.7. Water Bound Macadam Sub Base/base
(1) WBM Grading 1
Using stone screening Type A 13.2mm for Gr-III
Providing, laying, spreading and compacting stone aggregates of specific
sizes to water bound macadam specification including spreading in uniform
thickness, hand packing, rolling with three three wheel 80-100 kN static roller
in stages to proper grade and camber, applying and brooming.. as per
Technical Specifications clause 404 81 3300 ₹267,300.00 cu-m
(B) By mechanical means

5
Rural
Roads
2016-
2017 Interlocking Concrete Block Pavement having thickness 80mm as per drawing
Sch 6.7 and technical specification clause 1504 (including loading and unloading) 540 900 ₹486,000.00 sq-m

SUB TOTAL
(CONSTRUC
TION OF
APPROACH
ROAD) ₹1,461,117.55

GROSS ESTIMATED TOTAL ₹43,010,943.26