Percentage Boq: Validate Print Help
Percentage Boq: Validate Print Help
Tender Inviting Authority: Executive Engineer, PWD M-322, Opp. ISBT, Kashmere Gate Delhi-06
Name of Work: Construction of G+4 storey Police Post including Rain Water Harvesting Tank, Underground water tank & development work at
Sanjay Gandhi Transport Nagar, Delhi (Civil & Electrical).
Contract No: 45/EE/NBD/PWD/2019-20 Recall
1 2 3 4 5 6 7
1
Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means over areas
(exceeding 30cm in depth, 1.5m in width as well as
10 sqm on plan) including getting out and disposal 1270.00 cum 125.95 #VALUE! #VALUE!
of excavated earth, lead up to 50m and lift up to
1.5m,as directed by Engineer-in-Charge. (a) All
kinds of soil
2
Earth work in excavation by mechanical means
(Hydraulic excavator) / manual means in foundation
trenches or drains (not exceeding 1.5 m in width or
10 sqm on plan) including dressing of sides and
12.00 cum 166.40 #VALUE! #VALUE!
ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of
surplus excavated soil as directed, within a lead of
50 m. (a) All kinds of soil.
3
Excavating trenches of required width for pipes,
cables, etc including excavation for sockets, and
dressing of sides, ramming of bottoms, depth up to
1.5 m, including getting out the excavated soil, and
then returning the soil as required, in layers not
exceeding 20 cm in depth, including consolidating 40.00 meter 225.45 #VALUE! #VALUE!
each deposited layer by ramming, watering, etc. and
disposing of surplus excavated soil as directed,
within a lead of 50 m : All kinds of soil (a) Pipes,
cables etc. exceeding 80 mm dia. but not exceeding
300 mm dia
4
Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers
not exceeding 20cm in depth, consolidating each 840.00 cum 125.75 #VALUE! #VALUE!
deposited layer by ramming and watering, lead up
to 50 m and lift up to 1.5 m.
1 2 3 4 5 6 7
8
1 2 3 4 5 6 7
16
17
1 2 3 4 5 6 7
23
Providing and fixing 18mm thick gang saw cut
mirror polished premoulded and prepolished,
machine cut for kitchen platforms, vanity counters,
window sills , facias and similar locations of
required size, approved shade, colour and texture
laid over 20mm thick base cement mortar 1:4 (1
14.00 Sqm 3113.30 #VALUE! #VALUE!
cement : 4 coarse sand) joints treated with white
cement, mixed with matching pigment, epoxy touch
ups, including rubbing, curing, moulding and
polishing to edges to give high gloss finish etc.
complete at all levels. Granite of any colour and
shade Area of slab over 0.50 sqm.
24
25
Providing wood work in frames of doors, windows,
clerestory windows and other frames, wrought
framed and fixed in position with hold fast lugs or
2.30 cum 92743.05 #VALUE! #VALUE!
with dash fasteners of required dia. & length (hold
fast lugs or dash fastener shall be paid for
separately). (a) Second class teak wood
26
Providing and fixing Pre-laminated flat pressed 3
layer (medium density) particle board or graded
wood particle board IS : 3087 marked, with one side
decorative and other side balancing lamination
Grade I, Type II exterior grade IS : 12823 marked, 50.00 sqm 1304.55 #VALUE! #VALUE!
in shelves with screws and fittings wherever
required, edges to be painted with polyurethane
primer (fittings to be paid separately). (a) 25 mm
thick
27
Providing and fixing ISI marked flush door shutters
conforming to IS: 2202 (Part I) decorative type,
core of block board construction with frame of 1st
class hard wood and well matched teak 3 ply
60.00 sqm 2488.95 #VALUE! #VALUE!
veneering with vertical grains or cross bands and
face veneers on both faces of shutters. (a) 35 mm
thick including ISI marked Stainless Steel butt
hinges with necessary screws.
28
Providing and fixing ISI marked flush door shutters
conforming to IS: 2202 (Part I) decorative type,
core of block board construction with frame of 1st
class hard wood and well matched teak 3 ply
veneering with vertical grains or cross bands and 90.00 sqm 2129.10 #VALUE! #VALUE!
face veneers on both faces of shutters. (a) 25 mm
thick (for cupboard) including ISI marked nickel
plated bright finished M.S. Piano hinges IS: 3818
marked with necessary screws.
1 2 3 4 5 6 7
31
Providing and fixing in wall lining flat pressed three
layer (medium density) particle board or graded
wood Pre-laminated one side decorative lamination
on other side balancing lamination Grade I, Type II,
65.00 sqm 1422.90 #VALUE! #VALUE!
IS : 12823 marked, including priming coat on
unexposed surface, with necessary fixing
arrangement and screws etc. complete : (a) 25 mm
thick
38
Providing and fixing Fiber Glass Reinforced plastic
(FRP) Door Frames of cross-section 90 mm x 45
mm having single rebate of 32 mm x 15 mm to
receive shutter of 30 mm thickness. The laminate
shall be moulded with fire resistant grade
unsaturated polyester resin and chopped mat. Door 90.00 metre 415.50 #VALUE! #VALUE!
frame laminate shall be 2 mm thick and shall be
filled with suitable wooden block in all the three
legs. The frame shall be covered with fiber glass
from all sides. M.S. stay shall be provided at the
bottom to steady] the frame.
39
Providing and fixing to existing door frames. (a) 30
mm thick Fibreglass Reinforced Plastic (F.R.P.)
flush door shutter in different plain and wood finish
made with fire retardant grade unsaturated polyester
resin, moulded to 3 mm thick FRP laminate all
around, with suitable wooden blocks inside at
30.00 sqm 2535.80 #VALUE! #VALUE!
required places for fixing of fittings and
polyurethane foam (PUF)/ Polystyrene foam to be
used as filler material throughout the hollow panel,
casted monolithically with testing parameters of
F.R.P. laminate conforming to table - 3 of IS: 14856,
complete as per direction of Engineer-in-charge.
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
40
Providing and fixing fly proof stainless steel grade
304 wire gauge, to windows and clerestory
windows using wire gauge with average width of
70.00 sqm 1094.10 #VALUE! #VALUE!
aperture 1.4mm in both directions with wire of dia.
0.50 mm all complete. (a) With 12 mm Aluminium
U beading.
41
Providing and fixing bright /matt finished Stainless
Steel handles of approved quality & make with 164.00 each 89.70 #VALUE! #VALUE!
necessary screws etc., all complete. (a) 125mm
44
Providing and fixing circular/ Hexagonal cast iron
or M.S. sheet box for ceiling fan clamp, of internal
dia 140mm, 73mm height, top lid of 1.5mm thick
M.S. sheet with its top surface hacked for proper
bonding, top lid shall be screwed into the cast iron/ 52.00 each 130.10 #VALUE! #VALUE!
M.S. sheet box by means of 3.3mm dia. round
headed screws, one lock at the corners. Clamp shall
be made of 12mm dia M.S. bar bent to shape as per
standard drawing.
45
Providing and fixing carbon steel galvanised
(minimum coating 5 micron) dash fastener of 10
mm dia double threaded 6.8 grade (yield strength
480 N/mm² ), counter sunk head, comprising of 10 100.00 each 74.75 #VALUE! #VALUE!
m dia polyamide PA 6 grade sleeve, including
drilling of hole in frame, concrete/ masonry, etc. as
per direction of Engineer-in-charge. (a) 10 x 80 mm
46
47
Dry brick on edge flooring in required pattern with
bricks of class designation 7.5 on a bed of 12 mm
60.00 sqm 516.00 #VALUE! #VALUE!
mud mortar, including filling joints with Jamuna
sand, with common burnt clay non modular bricks.
48
Chequerred precast cement concrete tiles 22 mm
thick in footpath &courtyard, jointed with neat
cement slurry mixed with pigment to match the
shade of tiles, including rubbing and cleaning etc.
12.00 sqm 878.60 #VALUE! #VALUE!
complete, on 20mm thick bed of cement mortar 1:4
(1 cement: 4 coarse sand). (a) Medium shade
pigment using 50% white cement 50% Grey
cement.
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
49
Kota stone slab flooring over 20 mm (average) thick
base laid over and jointed with grey cement slurry
mixed with pigment to match the shade of the slab
200.00 sqm 1158.10 #VALUE! #VALUE!
including rubbing and polishing complete with base
of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
(a) 25 mm thick.
50
Providing and fixing Ist quality ceramic rectified
wall tiles conforming to IS: 15622 (thickness to be
specified by the manufacturer), of size 300x450mm
of approved make, in all colours, shades except
burgundy, bottle green, black of any size as
approved by Engineer-in-Charge, in skirting, risers 380.00 sqm 744.80 #VALUE! #VALUE!
of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3coarse sand) and jointing
with grey cement slurry @ 3.3kg per sqm, including
pointing in white cement mixed with pigment of
matching shade complete
51
Providing and laying rectified Glazed rectified floor
tiles of size 300x300mm or more (thickness to be
specified by the manufacturer), of 1stquality
conforming to IS : 15622, of approved make, in
colours White, Ivory, Grey, Fume Red Brown, laid 150.00 Sqm 822.45 #VALUE! #VALUE!
on 20 mm thick cement mortar 1:4(1 Cement: 4
Coarse sand), jointing with grey cement slurry @
3.3kg/sqm including grouting the joints with white
cement and matching pigments etc., complete.
52
Providing and laying vitrified floor tiles in different
sizes (thickness to be specified by the manufacturer)
with water absorption less than 0.08%and
conforming to IS : 15622 , of approved make, in all
colours and shades, laid on 20mm thick cement 785.00 sqm 1119.40 #VALUE! #VALUE!
mortar 1:4 (1 cement : 4 coarse sand) jointing with
grey cement slurry @ 3.3kg/sqm including grouting
the joints with white cement and matching pigments
etc., complete. (a) Size of Tile 600x600 mm
53
Providing and laying Vitrified tiles in different sizes
(thickness to be specified by manufacturer) with
water absorption less than 0.08 % and conforming
to I.S. 15622, of approved make in all colours &
shade in skirting, riser of steps, over 12 mm thick
100.00 sqm 1135.20 #VALUE! #VALUE!
bed of cement mortar 1:3 (1cement: 3 coarse sand),
jointing with grey cement slurry @ 3.3kg/sqm
including grouting the joint with white cement &
matching pigments etc. complete. (a) Size of Tile
600x600 mm
56
Providing and fixing on wall face unplasticised -
PVC moulded fittings/ accessories for unplasticised
Rigid PVC rain water pipes conforming to IS :
8.00 No. 98.00 #VALUE! #VALUE!
13592 Type A including jointing with seal ring
conforming to IS :5382 leaving 10 mm gap for
thermal expansion. Shoe (Plain) 110 mm Shoe
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
57
Providing and fixing unplasticised -PVC pipe clips
of approved design to unplasticised - PVC rain
water pipes by means of 50x50x50mm hardwood
plugs, screwed with M.S. screws of required length 80.00 No. 181.40 #VALUE! #VALUE!
including cutting brick work and fixing in cement
mortar 1:4 (1 cement : 4 coarse sand) and making
good the wall etc. complete. 110 mm
58
59
12 mm cement plaster of mix : (a) 1:6 (1 cement: 6
2355.00 sqm 168.25 #VALUE! #VALUE!
coarse sand)
64
Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of required
shade New work (Two or more
1640.00 sqm 96.80 #VALUE! #VALUE!
coats applied @ 1.43 ltr/ 10 sqm. over and including
priming coat of exterior primer applied @ 2.20
kg/10 sqm)
65
Wall painting with acrylic emulsion paint of
approved brand and manufacture to give an even 4680.00 sqm 84.45 #VALUE! #VALUE!
shade: (a) Two or more coats on new work.
1 2 3 4 5 6 7
68
69
Providing and laying C.C. pavement of mix M-25 with
ready mixed concrete from batching plant. The ready
mixed concrete shall be laid and finished with screed
board vibrator , vacuum dewatering process and
finally finished by floating, brooming with wire brush
etc. complete as per specifications and directions of 105.00 cum 6912.15 #VALUE! #VALUE!
Engineer-in charge. (The panel shuttering work shall
be paid for separately). (Note:- Cement content
considered in this item is @ 330 kg/cum. Excess/less
cement used as per design mix is payable/ recoverable
separately).
70
Providing and laying factory made chamfered edge
Cement Concrete paver blocks In foot path, park &
lawns driveway or light & traffic parking etc. of
required strength, thickness & size/ shape, made by
table vibratory method using PU mould, laid in
required colour & pattern over 50mm thick compacted
bed of course sand, compacting and proper
embedding/ laying of inter locking paver blocks into
180.00 Sqm 756.15 #VALUE! #VALUE!
the sand bedding layer through vibratory compaction
by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and
pattern, finishing and sweeping extra sand, all
complete as per manufacturer's specifications &
direction of Engineer in-Charge. 60mm thick Cement
concrete paver block of M-35 grade with approved
colour, design & pattern
71
Providing and fixing water closet squatting pan
(Indian type W.C. pan ) with 100 mm long arm sand
cast Iron P or S trap, 10 litre low level white P.V.C.
flushing cistern, including flush pipe, with manually
controlled device (handle lever) conforming to IS :
12.00 each 3494.20 #VALUE! #VALUE!
7231, with all fittings and fixtures complete,
including cutting and making good the walls and
floors wherever required (a) White Vitreous china
Orissa pattern W.C. pan of size 580x440 mm with
integral type foot rests
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
72
Providing and fixing white vitreous china pedestal
type water closet (European type) with seat and lid,
10 litre low level white vitreous china flushing
cistern & C.P. flush bend with fittings & C.I.
brackets, 40 mm flush bend, overflow arrangement
with specials of standard make and mosquito proof 4.00 each 4593.75 #VALUE! #VALUE!
coupling of approved municipal design complete,
including painting of fittings and brackets, cutting
and making good the walls and floors wherever
required : (a) W.C. pan with ISI marked white solid
plastic seat and lid
73
Providing and fixing white vitreous china flat back
half stall urinal of size 580x380x350 mm with white
PVC automatic flushing cistern, with fittings,
standard size C.P. brass flush pipe, spreaders with
unions and clamps (all in C.P. brass) with waste
4.00 each 6187.40 #VALUE! #VALUE!
fitting as per IS : 2556, C.I. trap with outlet grating
and other couplings in C.P. brass, including painting
of fittings and cutting and making good the walls
and floors wherever required : (a) Single half stall
urinal with 5 litre P.V.C. automatic flushing cistern
76
Providing and fixing 8 mm dia C.P. / S.S. Jet with
flexible tube upto 1 metre long with S.S. triangular
4.00 each 254.80 #VALUE! #VALUE!
plate to European type W.C. of quality and make as
approved by Engineer - in - charge.
1 2 3 4 5 6 7
84
Providing and fixing M.S. holder-bat clamps of
approved design to Sand Cast iron/cast iron (spun)
pipe embedded in and including cement concrete
blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2
30.00 each 165.05 #VALUE! #VALUE!
coarse sand : 4 graded stone aggregate 20 mm
nominal size), including cost of cutting holes and
making good the walls etc. : (a) For 75 mm dia.
Pipe
96
Providing and fixing trap of self cleansing design
with screwed down or hinged grating with or
without vent arm complete, including cost of cutting
22.00 each 1072.80 #VALUE! #VALUE!
and making good the walls and floors : 100 mm
inlet and 75 mm outlet Long arm (a) Sand Cast
Iron S&S as per IS- 3989.
1 2 3 4 5 6 7
99
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes, having thermal stability for
hot & cold water supply, including all CPVC plain
& brass threaded fittings, i/c fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of
pipes & fittings with one step CPVC solvent cement 110.00 metre 284.85 #VALUE! #VALUE!
and the cost of cutting chases and making good the
same including testing of joints complete as per
direction of Engineer in Charge. :Concealed work,
including cutting chases and making good the walls
etc. (a) 20 mm nominal outer dia .Pipes.
1 2 3 4 5 6 7
116 Providing and fixing C.P. brass long nose bib cock
of approved quality conforming to IS standards and
8.00 each 555.30 #VALUE! #VALUE!
weighing not less than 810 gms. (a) 15 mm nominal
bore.
117 Providing and fixing C.P. brass long body bib cock
of approved quality conforming to IS standards and
8.00 each 492.55 #VALUE! #VALUE!
weighing not less than 690 gms. (a) 15 mm nominal
bore
118 Providing and fixing C.P. brass angle valve for
basin mixer and geyser points of approved quality
38.00 each 475.70 #VALUE! #VALUE!
conforming to IS:8931 a) 15 mm nominal bore (a)
15mm nominal bore
119 Providing and fixing PTMT Ball cock of approved
quality, colour and make complete with Epoxy
coated aluminium rod with L.P./ H.P.H.D. plastic 6.00 each 413.25 #VALUE! #VALUE!
ball. (a) 25 mm nominal bore, 152 mm long.
Weighing not less than 440 gms.
120 Providing, laying and jointing glazed stoneware
pipes class SP-1 with stiff mixture of cement mortar
in the proportion of 1:1 (1 cement : 1 fine sand) 40.00 metre 692.50 #VALUE! #VALUE!
including testing of joints etc. complete : (a) 250
mm diameter
121 Providing and laying cement concrete 1:5:10 (1
cement : 5 coarse sand : 10 graded stone aggregate
40 mm nominal size) all-round S.W. pipes including 40.00 metre 1027.00 #VALUE! #VALUE!
bed concrete as per standard design: (a) 250 mm
diameter S.W. pipe
122
1 2 3 4 5 6 7
125 Providing and fixing in position pre-cast R.C.C.
manhole cover and frame of required shape and
4.00 each 1300.95 #VALUE! #VALUE!
approved quality H D - 20 (a) Circular shape 560
mm internal diameter
126
127
For shutters of doors, windows & ventilators
including providing and fixing hinges/ pivots and
making provision for fixing of fittings wherever
required including the cost of EPDM rubber / 1926.00 kg 444.90 #VALUE! #VALUE!
neoprene gasket required (Fittings shall be paid for
separately). (a) Powder coated aluminium
(minimum thickness of powder coating 50 micron)
128
Providing and fixing glazing in aluminium door,
window, ventilator shutters and partitions etc. with
EPDM rubber / neoprene gasket etc. complete as
per the architectural drawings and the directions of 102.00 sqm 1003.95 #VALUE! #VALUE!
engineer-in-charge . (Cost of aluminium snap
beading shall be paid in basic item): (a) With float
glass panes of 5.50 mm thickness
129
Providing and fixing aluminium casement windows
fastener of required length for aluminium windows
248.00 each 55.50 #VALUE! #VALUE!
with necessary screws etc. complete. Powder coated
minimum thickness 50 micron aluminium.
130
1 2 3 4 5 6 7
131
132
Providing and Placing in position suitable PVC
water stops conforming to IS:12200 for
construction/ expansion joints between two RCC
members and fixed to the reinforcement with 65.00 metre 254.15 #VALUE! #VALUE!
binding wire before pouring concrete etc. complete :
(a) Serrated with central bulb (225mm wide, 8-
11mm thick).
133
134
Boring/drilling bore well of required dia for casing/
strainer pipe, by suitable method prescribed in IS:
2800 (part I), including collecting samples from
different strata, preparing and submitting strata
chart/ bore log, including hire & running charges of 45.00 metre 370.70 #VALUE! #VALUE!
all equipments, tools, plants & machineries required
for the job, all complete as per direction of Engineer
-in-charge, upto 90 metre depth below ground level.
All types of soil (a) 300 mm dia
135
Supplying, assembling, lowering and fixing in
vertical position in bore well, unplasticized PVC
medium well casing (CM) pipe of required dia,
conforming to IS: 12818, including required hire 15.00 metre 610.65 #VALUE! #VALUE!
and labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of
Engineer -in-charge. (a) 200 mm nominal size dia
136
Supplying, assembling, lowering and fixing in
vertical position in bore well unplasticized PVC
medium well screen (RMS) pipes with ribs,
conforming to IS: 12818, including hire & labour 30.00 metre 821.15 #VALUE! #VALUE!
charges, fittings & accessories etc. all complete, for
all depths, as per direction of Engineer-in-charge.
(a) 200 mm nominal size dia
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
137
Supplying, filling, spreading & levelling stone
boulders of size range 5 cm to 20 cm, in recharge
11.00 cum 921.90 #VALUE! #VALUE!
pit, in the required thickness, for all leads & lifts, all
complete as per direction of Engineer-in-charge.
142
143
Providing and fixing suitable size threaded mild
steel cap or spot welded plate to the top of bore well
1.00 each 231.75 #VALUE! #VALUE!
housing/ casing pipe, removable as per requirement,
all complete for bore well of: (a) 200 mm dia
1 2 3 4 5 6 7
145
146
Providing & Fixing 0.50mm thick plastic wire mesh
fabric having mesh hole size not more than 1.20mm
60.00 sqm 138.65 #VALUE! #VALUE!
in recharge pit for separating the filter layers as per
direction of Engineer-in-Charge.
147
148
1 2 3 4 5 6 7
152 Cost Index : 15.69% #VALUE! % 15.69 #VALUE! #VALUE!
153 Total
#VALUE! No. 1.00 #VALUE! #VALUE!
154
155
1 2 3 4 5 6 7
156
Providing and fixing signages on the wall or with any other required
structure, with provision of multilingual text integral with 4mm thick
blue Acrylic base plate with min 0.5 mm Aluminium sheet at the back
with Upper Case San Serif words made of white acrylic non glare cut
out letters of height 15mm, raised above base plate by not less than
0.8mm and the equivalent word/s written in Hindi / any language as
required with same specifications with Grade 1 Braille to be integral
with the sign face and should be raised 0.5mm above Acrylic base plate.
Each signboard to be fixed strictly as per the Harmonised Guidelines &
Space Standards for Barrier Free Built Environment for persons with
Disability, issued By MOUD, Govt. of India, and as as per approved
drawings and complete as per the directions of Engineer - In - Charge.
Note:- 25995.70 sqcm 3.69 #VALUE! #VALUE!
i).Payment for structure, if required, shall be paid separately.)
ii) The Above Nomenclature shall be applicable for all types of signgaes
like
a)Identification signgaes (For Eg Room Names / Toilet facility /
Drinking Water / Staircase / Entry / Exit / Lift etc.) of the size 150 mm
X 230 mm or 200 X 200 mm).
b) Floor Directories ( Signboard Placed near the Lift / Staircase / Entry
to the particular Floor indicating the facilities on that floor. These are
normally also callled as Directional Signages.). Min Size of these
Boards shall not be less that 450 mm X 450 mm.
c) Emergency Exit Sign Boards ( Generally used Text as "In Case of
Emergency, Do Not Use The Lift" , "Emergency Exit" etc.)
157
Providing and fixing 50 mm wide Yellow colour,
self adhesive 'EDGE STRIPS' of approved make on
risers of staircase to help persons with visual
150.00 Mtr 245.07 #VALUE! #VALUE!
disabilities and elderly including cutting and pasting
complete in all respect as per direction of Engineer-
in-charge.
160
Providing and fixing in position 'U' shaped Grab
Bar made up of Heavy Duty stainless steel (grade
304) of 750 mm in length & 40 mm dia (Outer dia
with 3 mm thick sheet ) seamless pipe including
Hinge ,base plate and steel fasteners, in the toilets
as per manufacturers specification, as per drawings
1.00 Each 13179.00 #VALUE! #VALUE!
and "Harmonised Guidelines & Space Standard for
Barrier Free Environment issued by MOUD, Govt
Of India" to make them Accessible for Persons with
Disabilities. Rate shall include all accessories,
labour and material, complete as per direction of
Engineer-in-charge.
161
Providing and fixing in position 'L' shaped Grab
Bar made up of Heavy Duty stainless steel (grade
304) 40 mm (Outer dia with 3 mm thick sheet ) dia
seamless pipe, & 750 mm in vertical length & 900
mm in horizontal length including base plate and
steel fasteners in the toilets as per manufacturers
specification complete as per drawings and 1.00 Each 10133.00 #VALUE! #VALUE!
''Harmonised Guidelines & Space Standard for
Barrier Free Environment issued by MOUD, Govt
Of India" to make them Accessible for Persons with
Disabilities. Rate shall include all accessories,
labour and material, complete as per direction of
Engineer-in-charge
1 2 3 4 5 6 7
163 Less : 9.50%
#VALUE! % 9.50 #VALUE! #VALUE!
165
Sub- Head I (EI, Fans & Fitting, DB's, Earthing)
Wiring for light point/ fan point/ exhaust fan point/
call bell point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable in surface /
recessed medium class PVC conduit, with modular 464.00 Points 685.09 #VALUE! #VALUE!
switch, modular plate, suitable GI box and earthing
the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
a) Group C
166
Wiring for twin control light point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core
cable in surface / recessed medium class PVC
conduit, 2 way modular switch, modular plate, 54.00 Points 732.15 #VALUE! #VALUE!
suitable GI box and earthing the point with 1.5
sq.mm FRLS PVC insulated copper conductor
single core cable etc. as required.
167
Wiring for light/ power plug with 2X4 sq. mm
FRLS PVC insulated copper conductor single core
cable in surface/ recessed medium class PVC
500.00 Meters 152.04 #VALUE! #VALUE!
conduit alongwith 1 No. 4 sq. mm FRLS PVC
insulated copper conductor single core cable for
loop earthing as required.
168
Wiring for light/ power plug with 4X4 sq. mm
FRLS PVC insulated copper conductor single core
cable in surface/ recessed medium class PVC
450.00 Meters 254.31 #VALUE! #VALUE!
conduit alongwith 2 Nos. 4 sq. mm FRLS PVC
insulated copper conductor single core cable for
loop earthing as required.
169
Wiring for circuit/ submain wiring alongwith earth
wire with the following sizes of FRLS PVC
insulated copper conductor, single core cable in
400.00 Meters 101.36 #VALUE! #VALUE!
surface/ recessed medium class PVC conduit as
required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth
wire
170
Wiring for circuit/ submain wiring alongwith earth
wire with the following sizes of FRLS PVC
insulated copper conductor, single core cable in
260.00 Meters 205.44 #VALUE! #VALUE!
surface/ recessed medium class PVC conduit as
required. a) 2 X 6 sq. mm + 1 X 6 sq. mm earth
wire
1 2 3 4 5 6 7
176 Supplying and fixing following size/ modules, GI
box alongwith modular base & cover plate for
25.00 Nos. 268.79 #VALUE! #VALUE!
modular switches in recess etc. as required. a) 8
Module (125 mmX125 mm)
177 Supplying and fixing following modular switch/
socket on the existing modular plate & switch box
25.00 Nos. 103.17 #VALUE! #VALUE!
including connections but excluding modular plate
etc. as required. a) 15/16 A switch
178
Supplying and fixing following modular switch/
socket on the existing modular plate & switch box
25.00 Nos. 138.47 #VALUE! #VALUE!
including connections but excluding modular plate
etc. as required. a) 6 pin 15/16 A socket outlet
179
Supplying and fixing following modular switch/
socket on the existing modular plate & switch box
50.00 Nos. 73.31 #VALUE! #VALUE!
including connections but excluding modular plate
etc. as required. a) 3 pin 5/6 A socket outlet
180
Supplying and fixing following modular switch/
socket on the existing modular plate & switch box
50.00 Nos. 86.88 #VALUE! #VALUE!
including connections but excluding modular plate
etc. as required. a) Telephone socket outlet
181
Supplying and fixing following modular switch/
socket on the existing modular plate & switch box
13.00 Nos. 87.79 #VALUE! #VALUE!
including connections but excluding modular plate
etc. as required. a) TV antenna socket outlet
185
Supplying and fixing following way, single pole and
neutral, sheet steel, MCB distribution board, 240 V,
on surface/ recess, complete with tinned copper bus
bar, neutral bus bar, earth bar,din bar, 9.00 Nos. 1041.66 #VALUE! #VALUE!
interconnections, powder painted including earthing
etc. as required. (But without MCB/RCCB/Isolator)
a) 12 way, Double door
186
Supplying and fixing following way prewired,
horizontal type three pole and neutral, sheet steel,
MCB distribution board, 415 V, on surface/ recess,
complete with tinned copper bus bar, neutral bus
4.00 Nos. 9814.00 #VALUE! #VALUE!
bar, earth bar, din bar, interconnections, powder
painted including earthing etc. as required. (But
without MCB/RCCB/ Isolator) a) 6 way (8 + 18),
Double door
187
Supplying and fixing of following ways surface/
recess mounting, vertical type, 415 V, TPN MCB
distribution board of sheet steel, dust protected,
duly powder painted, inclusive of 200 A, tinned
copper bus bar, common neutral link, earth bar, din 1.00 No. 7636.00 #VALUE! #VALUE!
bar for mounting MCBs (but without MCBs and
incomer) as required. (Note : Vertical type MCB
TPDB is normally used where 3 phase outlets are
required.) a) 4 way (8 + 12), Double door
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
188
Supplying and fixing of following ways surface/
recess mounting, vertical type, 415 V, TPN MCB
distribution board of sheet steel, dust protected,
duly powder painted, inclusive of 200 A, tinned
copper bus bar, common neutral link, earth bar, din 1.00 No. 9436.00 #VALUE! #VALUE!
bar for mounting MCBs (but without MCBs and
incomer) as required. (Note : Vertical type MCB
TPDB is normally used where 3 phase outlets are
required.) a) 8 way (8 + 24), Double door
189
Supplying and fixing of 63 A TP MCB rating, 415
V, 10 kA, “C” curve, miniature circuit breaker
suitable for inductive load of following poles in the 4.00 Nos. 1337.00 #VALUE! #VALUE!
existing MCB DB complete with connections,
testing and commissioning etc. as required.
190
Supplying and fixing of 63 A FP MCB rating, 415
V, 10 kA, “C” curve, miniature circuit breaker
suitable for inductive load of following poles in the 5.00 Nos. 1750.00 #VALUE! #VALUE!
existing MCB DB complete with connections,
testing and commissioning etc. as required.
191
Supplying and fixing of 100 A FP MCB rating, 415
V, 10 kA, “C” curve, miniature circuit breaker
suitable for inductive load of following poles in the 1.00 No. 6443.00 #VALUE! #VALUE!
existing MCB DB complete with connections,
testing and commissioning etc. as required.
192
Supplying and fixing 40 A, double pole, (single
phase and neutral), 240 V, residual current circuit
breaker (RCCB), having a sensitivity current 30 mA 13.00 Nos. 1555.70 #VALUE! #VALUE!
in the existing MCB DB complete with connections,
testing and commissioning etc. as required.
193
Supplying and fixing 63A, four pole, (three phase
and neutral), 415 V, residual current circuit breaker
(RCCB), having a sensitivity current 30 mA in the 5.00 Nos. 2083.31 #VALUE! #VALUE!
existing MCB DB complete with connections,
testing and commissioning etc. as required.
194
Supplying and fixing 100A, four pole, (three phase
and neutral), 415 V, residual current circuit breaker
(RCCB), having a sensitivity current 30 mA in the 1.00 No. 5094.00 #VALUE! #VALUE!
existing MCB DB complete with connections,
testing and commissioning etc. as required.
195
Supplying and fixing Cable End Box (Loose wire
box)(IP 43) suitable for following single pole and
neutral, sheet steel, MCB distribution board, 240 V,
13.00 Nos. 441.64 #VALUE! #VALUE!
on surface/ recess, complete with testing and
commissioning etc. as required. a) For 14 way,
Double door SPN MCBDB
196
Supplying and fixing Cable End Box (Loose wire
box)(IP 43) suitable for following triple pole and
neutral, sheet steel, MCB distribution board, 415 V,
5.00 Nos. 552.05 #VALUE! #VALUE!
on surface/ recess, complete with testing and
commissioning etc. as required. a) For 6 way,
Double door TPN MCBDB
197
Supplying and fixing Cable End Box (Loose wire
box)(IP 43) suitable for following triple pole and
neutral, sheet steel, MCB distribution board, 415 V,
1.00 No. 658.84 #VALUE! #VALUE!
on surface/ recess, complete with testing and
commissioning etc. as required. a) For 8 way,
Double door TPN MCBDB
198
Supplying and fixing 5 A to 32 A rating, 240/415 V,
10 kA, “C” curve, miniature circuit breaker suitable
for inductive load of following poles in the existing 180.00 Nos. 156.57 #VALUE! #VALUE!
MCB DB complete with connections, testing and
commissioning etc. as required. a) Single pole
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
199
Supplying and fixing 5 A to 32 A rating, 240/415 V,
10 kA, “C” curve, miniature circuit breaker suitable
for inductive load of following poles in the existing 9.00 Nos. 419.02 #VALUE! #VALUE!
MCB DB complete with connections, testing and
commissioning etc. as required. a) Double pole
200
Supplying and fixing single pole blanking plate in
48.00 Nos. 6.34 #VALUE! #VALUE!
the existing MCB DB complete etc. as required.
201
Earthing with G.I. earth plate 600 mm X 600 mm X
6 mm thick including accessories, and providing
masonry enclosure with cover plate having locking 2.00 Nos. 7501.55 #VALUE! #VALUE!
arrangement and watering pipe of 2.7 meter long
etc. with charcoal/ coke and salt as required.
202
Providing and fixing 25 mm X 5 mm G.I. strip in 40
mm dia G.I. pipe from earth electrode including
6.00 Meters 317.66 #VALUE! #VALUE!
connection with G.I. nut, bolt, spring, washer
excavation and re-filling etc. as required.
203
Providing and fixing 25 mm X 5 mm G.I. strip on
10.00 Meters 116.75 #VALUE! #VALUE!
surface or in recess for connections etc. as required.
207
Providing and fixing of lightning conductor finial,
made of 25 mm dia 300 mm long, G.I. tube, having
4.00 Nos. 275.12 #VALUE! #VALUE!
single prong at top, with 85 mm dia 6 mm thick G.I.
base plate including holes etc. complete as required.
208
Providing and fixing G.I. tape 20 mm X 3 mm thick
on parapet or on surface of wall for lightning 130.00 Meters 59.73 #VALUE! #VALUE!
conductor complete as required.(For horizontal run)
209
Providing and fixing G.I. tape 20 mm X 3 mm thick
on parapet or on surface of wall for lightning 36.00 Meters 90.50 #VALUE! #VALUE!
conductor complete as required. (For vertical run)
1 2 3 4 5 6 7
212
Supply installation testing commissioning of 35-40
W Suspended architectural LED luminaire ,
Environmental friendly, energy saving long life
corrosion resistant, vertical/horizontal surface
mounting pressure die-cast aluminium well glass
luminaires with high power LED as light
2.00 Nos. 2585.00 #VALUE! #VALUE!
source.with luminous efficacy approx. 90 lm/ W,
having Correlated Color Temperature in range
5000K-6500K & CRI >70 % , having THD < 10%
and Power factor > 90%, with Operating temp.
range : -10°C to +45°C i/c Suspension by means of
steel Chain
215
Supplying, Installation, testing and commissioning
of 20-22 watt , Extruded Aluminimum LED Batten
luminaire with minimum lumen 100 per watt
suitable for cool day white light having minimum
CCT 5700K-6500K, power factor >0.90,CRI>75% (
34.00 Nos. 514.00 #VALUE! #VALUE!
including dismantling the old fitting if any )
complete with all accessories etc directly on
suitable location including connection with 1.5
Sq.mm FRLS PVC insulated copper conductor ,
single core cable and earthing etc. as required .
216
217
Providing and fixing circular/ Hexagonal cast iron
or M.S. sheet box for ceiling fan clamp, of internal
dia 140 mm, 73 mm height, top lid of 1.5 mm thick
M.S. sheet with its top surface hacked for proper
bonding, top lid shall be screwed into the cast iron/ 96.00 Nos. 129.37 #VALUE! #VALUE!
M.S. sheet box by means of 3.3 mm dia round
headed screws, one lock at the corners. Clamp shall
be made of 12 mm dia M.S. bar bent to shape as per
standard drawing.
218
Supplying Installation, testing and commissioning
of 50 watt 75 CFM 5 star rating 1200 mm sweep
ceiling fan, including wiring the down rods of
standard length (upto 30 cm) with 1.5 sq. mm FRLS 96.00 Nos. 1763.00 #VALUE! #VALUE!
PVC insulated, copper conductor, single core cable,
( including dismantling the old fitting if any )
complete etc. as required.
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
219
Supplying, Installation, Testing and Commissioning
of following size Exhaust Fan 900 RPM, Single
Phase, Air delivery more than 1100 Cu. Mtr./ Hr. of
21.00 Nos. 2716.00 #VALUE! #VALUE!
following size in the existing opening, making good
the damage, connection, testing, commissioning etc.
as required. a) 300 mm Sweep
220
Supplying, Installation, Testing and Commissioning
of following size Exhaust Fan 900 RPM, Single
Phase, Air delivery more than 1100 Cu. Mtr./ Hr. of
5.00 Nos. 3086.00 #VALUE! #VALUE!
following size in the existing opening, making good
the damage, connection, testing, commissioning etc.
as required. a) 380 mm Sweep
221
222
Supplying, Installation, Testing & Commissioning
of 30-40 Watt Flood Light fitting Energy saving,
environmental friendly, long life, exclusive
innovative die-cast aluminium flood light with high
6.00 Nos. 2066.00 #VALUE! #VALUE!
power LEDs as light source, suitable for
highlighting architectural features or Area Lighting.
Also suitable to rough services/installations making
connection etc as reqd.
223
Supplying, Installation, Testing & Commissioning
of 60-70 Watt Street Light fitting die-cast
aluminium IP66 with high power LEDs as light
source, having Lumen/watt ≥ 100 minimum CCT 18.00 Nos. 4773.00 #VALUE! #VALUE!
5700K-6500K, power factor not less than
>0.90,CRI>75% i/c making connection and
dismantalling old fitting etc as reqd.
224
Fabrication, and supply of 80 mm dia , 6 mtr long
GI pole (medium Class) having Base plate of size
300 mm x 300 mm x 6 mm welded at the bottom i/c 7.00 Nos. 5291.00 #VALUE! #VALUE!
painting with one or more coat of primer and 2
more coat of synthetic enamel paint etc as req.
225
Erection of metallic pole of following length in
cement concrete 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 40 mm nominal size) 7.00 Nos. 2497.80 #VALUE! #VALUE!
foundation including excavation and refilling etc. as
required. a) Above 4.5 meter and upto 6.5 meter
226
Providing and making steel pole collar with cement
concrete (1 cement : 3 coarse sand : 6 stone
aggregate 20 mm) of specified size and shape
0.43 Cu.Mtrs 4247.17 #VALUE! #VALUE!
including form work, plastering if required, curing
etc. as required. (volume of pole/ pipe not to be
deducted)
1 2 3 4 5 6 7
229
Fabricating supplying and fixing hinged type
weather proof metal box of size 300 mm x250 mm
x150 mm deep made out of 16 SWG M.S sheet i/c
supplying and fixing 15cm long 100 amp capacity
20.00 Nos. 1400.00 #VALUE! #VALUE!
Al. bus bar 2 nos duly fixed on porcelain base i/c
supplying and fixing 16 amp 230 volt kit kat 1 no,
2 nos clamps of suitbale size for fixing on pole etc.
as reqd.
230
231
Supplying, Installation, testing and commissioning
of LED Post top lantern of 35-40 W,energy saving,
environmental friendly, long life aesthetically
designed with symmetrical light distribution, spun 2.00 Nos. 6071.00 #VALUE! #VALUE!
aluminium landscape luminaire with high power
LEDs as light source. complete connection etc. as
reqd.
232
Supplying, Installation, Testing & Commissioning
of 8-11 watt bollard type New generation, energy
saving, environmental friendly, long life
20.00 Nos. 3220.00 #VALUE! #VALUE!
aesthetically designed aluminium landscape
luminaire for diffused lighting with high power
LED as light source i/c connection etc. as reqd.
233
1 2 3 4 5 6 7
237
Supplying and Laying of 3.5 x 95 XLPE insulated
and PVC sheathed Aluminium armoured power
cable of 1.1 KV grade conf. to IS 7098 (Part-I) and 20.00 Meters 450.00 #VALUE! #VALUE!
ISI Marked only in the following ways etc. as
required. a) In Open Duct
238
Supplying and Laying of 3.5 x 35 sq.mm. XLPE
insulated and PVC sheathed Aluminium armoured
power cable of 1.1 KV grade conf. to IS 7098 (Part- 10.00 Meters 214.00 #VALUE! #VALUE!
I) and ISI Marked only in the following ways etc.
as required. a) In Open Duct
1 2 3 4 5 6 7
250 Supplying and Laying of 3 x 6 sq.mm. XLPE
insulated and PVC sheathed Aluminium armoured
power cable of 1.1 KV grade conf. to IS 7098 (Part- 10.00 Meters 107.00 #VALUE! #VALUE!
I)) and ISI Marked only in the following ways etc.
as required. a) On Surface
251 Providing and fixing 6 SWG dia G.I. wire on
surface or in recess for loop earthing along with
200.00 Meters 20.82 #VALUE! #VALUE!
existing surface recessed conduit/ submain wiring/
cable as required.
252 Providing and fixing 4.00 mm dia copper wire on
surface or in recess for loop earthing along with
200.00 Meters 66.07 #VALUE! #VALUE!
existing surface/ recessed conduit/ submain wiring/
cable as required.
253
Supplying and laying of following size DWC HDPE
pipe ISI marked along with all accessories like
socket, bend, couplers etc. conforming to IS 14930,
Part II complete with fitting and cutting, jointing
etc..direct in ground (75 cm below ground level) 220.00 Meters 207.25 #VALUE! #VALUE!
including excavation and refilling the trench but
excluding sand cushioning and protective covering
etc., complete as required. a) 120 mm dia (OD-120
mm & ID-103 mm nominal)
254
Supplying and laying of following size DWC HDPE
pipe ISI marked along with all accessories like
socket, bend, couplers etc. conforming to IS 14930,
Part II complete with fitting and cutting, jointing
etc..direct in ground (75 cm below ground level) 200.00 Meters 122.18 #VALUE! #VALUE!
including excavation and refilling the trench but
excluding sand cushioning and protective covering
etc., complete as required. a) 63 mm dia (OD-63
mm & ID-51 mm nominal)
255
Fabricating Supplying, Installation, Testing and
Commissioning of floor/Wall mounted cubical
panel board minimum 300mm deep made out of
2mm thick CRCA Sheet, dust and vermin proof,
duly compact with suitable Al. bus bar of size as per
incomer duly powder coated paint of approved
2.00 Sq.Mtrs 16307.00 #VALUE! #VALUE!
colour and shade providing earth stud at both end,
louvers and mesh on both side of panel board for
ventilation purpose i/c connection and
interconnection, earthing complete etc. as reqd.
(Nos. of panels shall be decided by Deptt. before
fabricating & after award of work).
1 2 3 4 5 6 7
262 SITC of following accessories in the above panel i/c
connections etc as reqd.
6.00 Nos. 957.00 #VALUE! #VALUE!
Outgoing
a) 63 A "C" Curve DPMCB
263 SITC of following accessories in the above panel i/c
connections etc as reqd.
1.00 No. 1639.00 #VALUE! #VALUE!
Outgoing
a) 63 A MCCB
264 SITC of following accessories in the above panel i/c
connections etc as reqd.
2.00 Sets 1908.00 #VALUE! #VALUE!
Outgoing
a) Digital type VAF+PF
265 SITC of following accessories in the above panel i/c
connections etc as reqd.
2.00 Sets 318.00 #VALUE! #VALUE!
Outgoing
a) LED type indicating lamp RYB
266 SITC of following accessories in the above panel i/c
connections etc as reqd.
6.00 Nos. 332.00 #VALUE! #VALUE!
Outgoing
a) 2 amp SP MCB
267 SITC of following accessories in the above panel i/c
connections etc as reqd.
6.00 Nos. 415.00 #VALUE! #VALUE!
Outgoing
a) 200 A / 5 A CT
Kg.) lift of having contract speed of 1.5 mps serving different floors in
268 the existing lift shaft as per detailed specifications of lift
(i) Speed :- 1 Mtr. Per second.
(ii) Floors:- 5 (Ground +4 Upper Floors)
(iii) Total Travel:- 5 (Ground + 4 Upper Floors)
(iv) Stops and opening:- 5 (Ground + 4 Upper Floors) In Front only
(v) Control:- Microprocessor based with AC variable voltage variable
frequency simplex selective i/c builtin voltage stabilier.
(vi) ARD - Automatic rescue device complete with maintenance free
batteries as required.
(vii) Operation :- Microprocessor based single automatic braile engrave
number push buttons / simplex selective with/without attendent.
(viii) Power:- 400/415 V,3 phase, 50 Hz, 4 wire.
(ix) Type of Doors:- Automatice power operated centre opening.
(x) Civil Works & Steel Items:- Provision of temporary scaffolding &
minor builders works and all steel items like girder in machine room,
sill angles, facical plates etc.
xi) Car Design- a) Car Wall finish in SS Hairline,304 LED Spot in
Ceiling b) Car doors finish in Stainless hairline 304.
c) Car door in Stainless steel
d) Granite flooring finish in Black Sea
e) Deco Ceiling finish in Stainless Steel Hairline 304.
f) Full height mirror on rear car panel
(xii) Car Operating panel:-a) Stylish , touchs sensitive glass panel 1.00 No. 1890000.00 #VALUE! #VALUE!
b) Door open/close and alarm buttons
c) Visual Call confirmation
d) Car Position indicator
e) Pre-annoucing arrow for collective controls
f) 16 Segment display
xiii) Landing Doors :- a) Fully Automatic Landing doors in Stainless
steel HL 304
b) Door Opening Direction :- Center
c) Gap filling Sheet
xiv) Standard Features :-a) Close loop control System
b) Self diagnostic control
c) 2 Hours fire rated landing doors
d) Overload detection
e) Automatic evacuation to nearest floor (ARD)
f) light curtain on car entrance
g) Alarm horn
h) Handrail in stainless steel finish on rear wall
i) Auto fan off
j) Auto light off
xv) Other Selected features:_ a) CCTV Cable preparation intercom - 3
way voice synthesizer on car
b) out of service mode
c) RCD protection on LDU
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
269
270
271
1 2 3 4 5 6 7
272
Supplying and fixing air vessel made of 250 mm
dia, 8 mm thick MS sheet, 1200 mm in height with
air release valve on top and flanged connection to
riser, drain arrangement with 25 mm dia gun metal 3.00 Sets 16298.15 #VALUE! #VALUE!
wheel valve with required accessories, pressure
gauge and paintingwith synthetic enamel paint of
approved shade as required.
273
Fabrication, supply, Insallation testing & commissioning of Electrical
control panel of cubical construction, floor mounted type, fabricated out
of 2mm thick CRCA sheet, compartmentalised with hinged lockable
doors, dust and vermin proof, powder coated of approved shade after 7
tank treatment process, cable alley, interconnection with suitable size
copper conductor cable/solid copper strip, having switchgears and
accessories, mountings and internal wiring, earth terminals, numbering
etc. complete in all respect, suitable for main fire pump, pressurisation
pump & diesel pump set complete as per CPWD specification with
following in coming and Outgoings, suitable for operation on 415V, 3
phase, 50Hz Ac Supply with enclosure protection class IP 42 as
required : a) INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu
rating Digital Voltmeter 0-500V with selector switch Digital Ammeter
(0-250 A) with selector swtich & CTs etc. LED type RYB phase
indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar
300A OUTGOING ( Note : All outgoing feeders for pumps should have
digital Ammeter with selector switches, and LED type ON, OFF, trip
indicating lamps) Main Fire Pump
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic
Star/Delta starter suitable for 60 HP pump with overload protection,
current sensing type single phase preventor complete with all
acceessories and internal wiring required for automatic operation, 1.00 Set 222385.65 #VALUE! #VALUE!
selector switch for local/remote, auto/manual/OFF operation. Jockey
Pump 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully
automatic Star/Delta starter with overload protection, current sensing
type single phase preventor complete with all acceessories and internal
wiring required for automatic operation, selector switch for
local/remote, auto/manual/OFF operation.
DIESEL ENGINE CONTROL
Control for diesel engine comprising - Automatic/Manual selctor switch
& 3 attempts starting device, timers and relays as required, push
buttons, start/stop in manual mode Indicating lamp for high/ Low Lub.
Oil pressure, High Water Temp and Engine on indication Battery
charger suitbale for 12V/24 V DC with boost and trickle selector
switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard
relays and accessories for automatic operation of diesel engine System
Controller
Designing, Supply, Installation, Testing and commissioning of system
controller to control operation of main electric fire pump, diesel pump,
Pressurization pump, Terrace pump in sequence as per specification
consisting of relays, timers. Sensors, annunciation window for fault
indication, complete as per specification
274
Providing, laying, testing & commissioning of 'C'
class heavy duty MS pipe conforming to IS 3589/IS
1239 including Welding, fittings like elbows, tees,
flanges, tapers, nuts bolts, gaskets etc. and fixing
100.00 Meters 1867.92 #VALUE! #VALUE!
the pipe on the wall/ceiling with suitable
clamp/support frame and painting with two or more
coats of synthetic enamel paint of required shade
complete as required : a) 150 mm dia
275
Providing, laying, testing & commissioning of 'C'
class heavy duty MS pipe conforming to IS 3589/IS
1239 including Welding, fittings like elbows, tees,
flanges, tapers, nuts bolts, gaskets etc. and fixing
36.00 Meters 1356.60 #VALUE! #VALUE!
the pipe on the wall/ceiling with suitable
clamp/support frame and painting with two or more
coats of synthetic enamel paint of required shade
complete as required : a) 100 mm dia
276
Providing, laying, testing & commissioning of 'C'
class heavy duty MS pipe conforming to IS 3589/IS
1239 including Welding, fittings like elbows, tees,
flanges, tapers, nuts bolts, gaskets etc. and fixing
6.00 Meters 712.24 #VALUE! #VALUE!
the pipe on the wall/ceiling with suitable
clamp/support frame and painting with two or more
coats of synthetic enamel paint of required shade
complete as required : a) 50 mm dia
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
277
Providing laying, testing & commissioning of 'C'
class heavy duty MS Pipe conforming to IS
1239/3589 i/c fittings like elbows, tees, flanges,
tapers, nuts bolts, gaskets etc. in ground including
welding, excavation & providing cement concrete 24.00 Meters 2150.28 #VALUE! #VALUE!
blocks as supports, anticorrosive treatment with
coaltar/asphalt tape as per IS 10221, refilling the
trench etc. of following sizes complete as required.
a) 150 mm. Dia
278
Supplying and fixing single headed internal hydrant
valve with instantaneous Gunmetal/Stainless Steel
coupling of 63 mm dia with cast iron wheel ISI
10.00 Sets 5418.24 #VALUE! #VALUE!
marked conforming to IS 5290 (Type -A) with
blank Gunmetal/Stainless Steel cap and chain as
required : a) Single headed Stainless steel
279
Supplying, fixing, testing and commissioning of
butterfly valve of PN 1.6 rating with
bronze/gunmetal seat duly ISI marked complete 6.00 Sets 7872.60 #VALUE! #VALUE!
with nuts, bolts, washers, gaskets conforming to IS
13095 of following sizes as required. a) 150 mm dia
280
Supplying, fixing, testing and commissioning of
butterfly valve of PN 1.6 rating with
bronze/gunmetal seat duly ISI marked complete 3.00 Sets 5840.87 #VALUE! #VALUE!
with nuts, bolts, washers, gaskets conforming to IS
13095 of following sizes as required. a) 100 mm dia
281
Supplying, fixing, testing and commissioning of
butterfly valve of PN 1.6 rating with
bronze/gunmetal seat duly ISI marked complete 1.00 Set 4382.01 #VALUE! #VALUE!
with nuts, bolts, washers, gaskets conforming to IS
13095 of following sizes as required. a) 80 mm dia
282
Supplying, fixing, testing and commissioning of
butterfly valve of PN 1.6 rating with
bronze/gunmetal seat duly ISI marked complete 1.00 Set 3322.26 #VALUE! #VALUE!
with nuts, bolts, washers, gaskets conforming to IS
13095 of following sizes as required. a) 50 mm dia
283
Providing, installation, testing and commissioning
of non-return valve of following sizes confirming to
2.00 Sets 15907.19 #VALUE! #VALUE!
IS: 5312 complete with rubber gasket, GI bolts,
nuts, washers etc.as required. a) 150 mm dia
284
Providing, installation, testing and commissioning
of non-return valve of following sizes confirming to
2.00 Sets 9806.58 #VALUE! #VALUE!
IS: 5312 complete with rubber gasket, GI bolts,
nuts, washers etc.as required. a) 100 mm dia
285
Providing, installation, testing and commissioning
of non-return valve of following sizes confirming to
1.00 Set 6822.80 #VALUE! #VALUE!
IS: 5312 complete with rubber gasket, GI bolts,
nuts, washers etc.as required. a) 80 mm dia
286
Supplying and fixing orifice plate made out of 6
mm thick stainless steel (Grade 304) with orifice of
required size to be fitted between flange & landing
12.00 Nos. 1168.36 #VALUE! #VALUE!
valve of external and internal hydrants to reduce
pressure at the outlet to the level of 3.5 kg/cm2
complete as required.
287
Providing, installation, testing and commissioning
of stainless steel Y-strainer fabricated out of 1.6 mm
2.00 Nos. 19957.06 #VALUE! #VALUE!
thick stainless steel, Grade 304, sheet with 3 mm
dia holes with stainless steel flange. a) 200mm dia
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
288
Providing, installation, testing and commissioning
of stainless steel Y-strainer fabricated out of 1.6 mm
1.00 No. 5837.25 #VALUE! #VALUE!
thick stainless steel, Grade 304, sheet with 3 mm
dia holes with stainless steel flange. a) 100mm dia
291
Supplying and fixing of fire brigade connection of
cast iron body with gun metal male instantaneous
inlet couplings complete with cap and chain as reqd.
2.00 Set 12508.91 #VALUE! #VALUE!
for suitable dia MS pipe connection conforming to
IS 904 as required. a) 4 way - 150 mm dia M.S.
Pipe
299
SITC of CO2 type Fire Extinguisher ISI marked
conforming to IS: 15683. Capacity 4.5 Kg.
Complete with delivery hose horn, squeeze grip/
20.00 Nos. 6778.00 #VALUE! #VALUE!
wheel type release valve, locking arrangement,
operation manual and bracket. Operating
Temperature: - 30ºC to + 55ºC.
NUMBER TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
#
Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate in Without Taxes in In Words
Rs. P Rs. P
1 2 3 4 5 6 7
300
SITC of Powder Fire Extinguisher (Stored Pressure
type) Capacity 06 Kg duly ISI marked conforming
to IS: 15683:2006, with IS 14609, ISI marked ABC
powder complete with squeeze grip release valve, 20.00 Nos. 2645.00 #VALUE! #VALUE!
discharge pipe locking arrangement, pressure gauge,
operation manual and bracket. Operating
Temperature: - 10ºC to + 55ºC.
301
Supplying and installing following size of
perforated painted with powder coating M.S. cable
trays with perforation not more than 17.5%, in
convenient sections, joined with connectors,
30.00 Meters 314.94 #VALUE! #VALUE!
suspended from the ceiling with M.S. suspenders
including bolts & nuts, painting suspenders etc. as
required. a) 100 mm width X 50 mm depth X 1.6
mm thickness
302
303
Supplying, installation, testing & commissioning of
repeater panel wih 320 character/ Touch screen
1.00 No. 98257.66 #VALUE! #VALUE!
LCD display with inbuilt reset, acknowledge and
silence switches complete as required.
304
Supplying, installation, testing & commissioning of
10.00 Nos. 3492.40 #VALUE! #VALUE!
addressable manual call point complete as required.
1 2 3 4 5 6 7
311 Supplying and drawing following sizes of FRLS
PVC insulated copper conductor, single core cable
700.00 Meters 33.49 #VALUE! #VALUE!
in the existing surface/ recessed steel/ PVC conduit
as required. a) 2 x 1.5 sq. mm
specifications attached.
312 b) Supply and fixing of SPV Module mounting structures suitable for
accommodating (320 wp) capacity SPV Module in different
combination as reqd. Structure should made of either Pre-galvanised
iron/Posmac/Hot dip galvanised iron or Aluminium of suitable strength
and design. Structure should withstand windspeed of given location as
per MNRE guidelines. Hardware used shall be of stainless Steel grade
304
c) Providing and laying in position cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) in
foundation of Solar Module array structure support.
d) Grid connected Inverter / Power Conditioning Unit (PCU) 415V AC,
three phase, 50Hz, Maximum generation of 50kW AC Power. The
Inverter should have anti islanding protection and shall adjust the
voltage and frequency level to suit the Grid Voltage and Frequency as
per Indian electricity grid level. (NEC, UL, CE certified). Efficiency of
PCU must not be less than 95%
e) Data logger shall be provided to monitor the generation and
performance of solar power plant and it should be enabled with remote
monitoring system. With following sensors-
(i) Sensors Irradiance, Module Temperature, ambient temperature and
wind
f) DC Array junction box should be provided between inverter/PCU and
solar modules. It shall be made of polycarbonate box with IP 65
protection, it shall contain DC fuses 1000V, DC SPD of suitable 1.00 Job 2452720.00 #VALUE! #VALUE!
capacity to handle surge and termination arrangement for incoming and
outgoing cable along with gland, lugs and other accessories etc. as
required.
g) Power distribution Panel complete with 1 No of MCCB of suitable
rating, 1 No of class 1 Surge Protection Device, Multifunction Meter
with CT, It shall be made of either IP 65 Polycarbonate box or in
metallic box of IP 65 if outdoor and IP54 if indoor, solar generation
meter, net metering etc complete as required
h) Lighting and surge voltage protection. It shall have suitable covering
70 SQMtrs area(Min)ESE type and rating should be provided to protect
solar power plant from natural lightening and it shall be grounded with
appropriate grounding arrangements.
i) Connection & Interconnection by supplying &fixing 1C X 4 Sq. mm
copper conductor solar power cable (module to DCDB and from DCDB
to inverter and Suitable size of AC power cable 4Cx16 Sqmm Copper
conductor from inverter to Solar ACDB/LT panel or and from Solar LT
panel to main building LT panel cable size should not be less than
3.5CX35 Sqmm Al armoured or size as per design and basis on cable
calculation.
(i) DC Cable 1CX4 Sqmm (Limiting to 700 Mtrs)
(ii) AC Cable 4CX16 Sqmm Cu (Limiting to 20 Mtrs)
(iii) AC Cable 4CX35 Sqmm Al (Limiting to 40 Mtrs)
(iv) Eathing cable 1CX10 sqmm cu(Limiting to 40 mtrs)
313
Sub-Head VI ( Water Supply Pump Sets )
Supply, Installation, Testing and Commissioning of
5 H.P. Mono-submersible pumpset capable of
2.00 Nos. 22708.00 #VALUE! #VALUE!
delivering 1220-450 LPM at head of 12-24 mtr.
suitable for operation on 415 ± 5% Volt, 50 HZ
A.C. supply etc. as reqd.
314
Supplying & fixing Following size GI pipe (B
class) in 3 mtr length with flange welded on both
3.00 Meters 857.00 #VALUE! #VALUE!
side complete with all accessories i.e gasket nut
bolts washer complete etc. as reqd. a) 80 mm.
315
Supplying & fixing Following size GI pipe (B
class) in 3 mtr length with flange welded on both
6.00 Meters 700.00 #VALUE! #VALUE!
side complete with all accessories i.e gasket nut
bolts washer complete etc. as reqd. a) 65 mm.
316
Supplying & fixing Following size GI pipe (B
class) in 3 mtr length with flange welded on both
30.00 Meters 550.00 #VALUE! #VALUE!
side complete with all accessories i.e gasket nut
bolts washer complete etc. as reqd. a) 50 mm
317
Supplying and fixing following sizes Gun metal
NRV horizontal & screwed type with accessories in 2.00 Nos. 3719.00 #VALUE! #VALUE!
the existing line etc. as reqd. a) 65 mm
1 2 3 4 5 6 7
321
322
Steel work welded in built up sections/ framed
work, including cutting, hoisting, fixing in position
and applying a priming coat of approved steel
50.00 Kgs 77.78 #VALUE! #VALUE!
primer using structural steel etc. as required. a) In
gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works
323
Supply and fixing of photo luminescent Non
Toxic,Non- Radio active maintenance free self
glowing signs comprising sulphide vinyl chargebale
crystals which glows in dark, single side sign made
4500.00 Sq.Inchs 17.00 #VALUE! #VALUE!
out of 1.2 mm thick Al. sheet and mounting
arrangements for wall/ ceiling mounting as per the
conditions . The colour combination and size of
letter shall be as IS 12349.
324
Supplying Installation Testing & Commissioning of
a new generation energy saving & environment
friendly EGRESS EDGELIT LIGHT for emergency 10.00 Nos. 3238.00 #VALUE! #VALUE!
exit signage double side Red of standard size 350 x
160 mm with backup of upto 2-3 hours.
325
Supplying Installation Testing & Commissioning of
a new generation energy saving & environment
friendly EGRESS EDGELIT LIGHT for lift arrow 5.00 Nos. 3169.00 #VALUE! #VALUE!
signage double side Red of standard size 350 x 160
mm with backup of upto 2-3 hours
Total in Figures
#VALUE! #VALUE!