Professional Documents
Culture Documents
3kW Solar Power System Proposal
3kW Solar Power System Proposal
Sundarajan Residence
Bangalore
Our Vision
LivSolar has been established to promote prosperous human life, by
optimally utilizing the renewable energies and to be a benchmarked
organization in renewable energy sector
Our Mission
LivSolar was started to be an admired sustainable solutions
organization and provide cost effective sustainable solutions for
every individuals that is engineered towards helping individuals,
businesses and communities to harness the full potential of the
nature’s natural resources
NOTE: As per the latest bill dated 09/09/2019 the total units consumed by both comman
area and Home is 246 units i.e app. 9 units per day. Based on the available site area and
the present load demand we propose a 3kW Solar Power System. A 3kW Solar Power
System. The proposal explores 3kW Hybrid, On-grid and Off-grid System. As per your
requirement Hybrid System will be configured such that there will no export of power,
to the grid, entire solar Power generated will be connected to both comman area, Terrace
Lightening Load and Home load points. This goes same with Off-grid system as well.
We have proposed On-grid system in the proposal, in case of on-grid any one meter can
be applied for net-metering since BSECOM allows only one connection for solar in
multi-dwelling buildings. Hence customer has to decide on which meter to be
considered for solar power.
Conditions: Solar (+ Battery) will be powering the load. Grid charging of battery: NA
Instance 3 – Load sharing with grid power – topology, with FULL solar
availability
Grid: Present, Solar: Present
Grid power will not be consumed even though the grid is available, Complete generation will be
diverted to Load, post charging of the Battery.
Load Shares the solar power and the grid power, thereby reducing the grid utilization
Instance 5 – Load sharing with grid power – topology with full solar
availability with partial load demand.
Grid: Present, Solar: Present
The excess power generated by solar will be fed back to the grid.
Note :*- Conversion efficiencies apply, The above explanation is conceptual, for understanding purpose only.
INR: Rupees Three lakhs Eighty Seven Three hundred and Ninety Six only.
Figure 2 shows the the H5A Flex Inverter which has a peak efficiency of 98.6 % and has built-
in and replaceable AC and DC-side Type II SPDs (surge protection devices) and 15 A string fuses. 2
MPP trackers are featured with symmetrical and asymmetrical loading possible (40/60 %) as well as a
wide input voltage range from 30 – 600 V. The aluminum housing ensures long lasting protection
against moisture and corrosion and is suitable for indoor and outdoor applications (IP65). The
lightweight and compact design of the RPI-H5A greatly simplifies installation. The inverters include
a unique wall mount bracket in the scope of delivery, allowing the units to be easily installed on a
variety of wall surfaces.
&
Total 2,85,000/-
The solar PV modules when exposed to the sunlight generate DC electricity. Solar charge
controllers also known as charge regulators limit the rate of current being delivered to the battery bank
and protect the batteries from over charging. Good charge controllers are crucial for keeping the
batteries healthy so that the life time of battery bank is maximized. A battery bank is essentially a
group of batteries wired together to store the electricity produced from the solar panels. Electrical
current flows from the solar panel through charge controller and battery bank before it is finally
converted into AC by the off-grid inverter. AC and DC safety disconnects are required for all solar
systems. For off-grid solar systems, one additional DC disconnect is installed between the battery bank
and the off-grid inverter. It is used to switch off the current flowing between these components. This
is important for maintenance, troubleshooting and protection against electrical fires.
Total 2,96,205/-
INR: Rupees Two lakhs Ninety Six Thousand Two hundred and Five only.
PROJECT SCHEDULE:
1. Project Execution
The precise duration and project schedule depends on site specific conditions like time of the
year (seasonal variations). We expect a staggered delivery over a period of 1 - 2 months for
the delivery of major components and 1 – 2 weeks execution time. However, the project
schedule can be optimized before actual signing of contract.
b. The delivery date of the project depends on the date of the order
2. Exclusions
The following are the exclusions from the scope of work which needs to be accounted for
the completion of the project:
a. Any roof strengthening required for installing PV system
b. Civil Work like any Plastering and Footing work
c. Safe approach to roof / terrace for working personnel
d. Identification of ventilated place for locating and installing inverter
e. Making available start-up power and water required for project execution
f. Temporary storage for work-in-progress components
3. Training
Training shall be provided after commissioning on the following topics:
a. Golden safety rules for the operation of the system
b. Troubleshooting
c. Basic maintenance requirements
d. Use of the monitoring features of the system
e. Identification of the main protection devices
WARRANTY
1. Warranty for Solar Panels
2. 12 years product warranty on RISEN solar panels
3. Inverter Warranty
a. Studer Inverter – 5 -year warranty (Extendable upto 12yrs)
b. Delta Inverter– 5 years standard warranty
c. Consul Inverter – 1 year Manufacturer warranty
d. Electrical and Hardware Accessories – 1 year
NOTE: This Warranty shall not apply to defects resulting from:
1. Willful damage or negligence, normal wear and tear Installation and /or
maintenance by Customer or a third party
2. Misuse or abuse of Equipment/ Modifications or alterations made by
Customer or a third party