Data Gathering Instrument For Trainee
Data Gathering Instrument For Trainee
Name: ________________________________Date:___________________
School/Institute: ________________________________________
Characteristics of learners
Language, literacy Average grade in: English Average grade in: Math
and numeracy a. 95 and above a. 95 and above
(LL&N) b. 90 to 94 b. 90 to 94
c. 85 to 89 c. 85 to 89
d. 80 to 84 d. 80 to 84
e. 75 to 79 e. 75 to 79
Sex a. Male
b. Female
d. Others(please specify)
6. You have just entered a science museum, what will you do first?
A. look around and find a map showing the locations of the various
exhibits.
B. talk to a museum guide and ask about exhibits.
C. go into the first exhibit that looks interesting, and read
directions later.
7. What kind of restaurant would you rather not go to?
A. one with the lights too bright
B. one with the music too loud
C. one with uncomfortable chairs
8. Would you rather go to
A. an art class?
B. a music class?
C. an exercise class?
9. Which are you most likely to do when you are happy?
A. grin
B. shout with joy
C. jump for joy
10. If you were at a party, what would you be most likely to remember the
next day?
A. the faces of the people there, but not the names
B. the names but not the faces
C. the things you did and said while you were there
11. When you see the word "d - o - g", what do you do first?
A. think of a picture of a particular dog
B. say the word "dog" to yourself silently
C. sense the feeling of being with a dog (petting it, running with it, etc.)
Instruction:
Read each of the questions in the left-hand column of the chart.
Place a check in the appropriate box opposite each question to indicate your answer.
Can I? YES NO
Perform root pass*
Clean root pass*
Weld subsequent/filling passes*
Perform capping*
Interpret drawing
Identify materials and consumables
Identify welding codes
Perform basic math computations and mensuration
Identify weld defects*
Rectify weld defects*
Apply weld techniques*
Handle materials, tools and equipment
Observe safety practices*
Pass weld visual inspection*
I agree to undertake assessment in the knowledge that information gathered will only be
used for professional development purposes and can only be accessed by concerned
assessment personnel and my manager/supervisor.
Candidate’s name
Date:
& signature:
Current
Proof/Evidence Means of validating
competencies
Prepared by:
Romarico Mendiola Jr
TRAINER
Perform capping
1.4 Perform capping
TRAINING NEEDS
Form No. 1.4
Qualification:
B. Welding
C. Electrode
D. None of the above
5. Joining two metals by applying heat to melt and fuse them, with or without
filler metal.
A. Electrode
B. Welding
C. Carbon steel plate
D. None of the above
6. The current-carrying rod used to strike an arc between rod and metal.
A. Current
B. Metal
C. Welding electrode
D. None of the above
7. A gas mixing and burning tool for the welding of metal.
A. Metal
B. welding torch
C. Carbon
D. All of the above
A. strong
B. Weak
C. Welding defect
D. all of the above
A. Standard
B. Competency
C. Welding
D. None of the abov
14. The junction of weld metal and the base metal, or the junction of
base metal parts when filler metal is not used.
A. Weld line
B. weld defects
C. weld carbon
D. Welding
15.A gas mixing and burning tool for the welding of metal
A. Welding torch
B. Torch
C. Hammer
D. wire brush
16. A deposit of filler metal from a single welding pass.
A. Root pass
B. Weld bead
C. Hot pass
D. All of the above
ANSWERS KEY
1. D 11. C
2. A 12. D
3. B 13. B
4. A 14. A
5. B 15. A
6. C 16. B
7. B 17. A
8. C 18. A
9. A 19. B
10. D 20. C
SESSION PLAN
A. INTRODUCTION:
This module covers the knowledge, skills and attitude in performing welding on carbon steel plates and pipes using smaw.
B. LEARNING ACTIVITIES:
LO: 1
Learning Content Methods Presentation Practice Feedback Resources Time
Modular self- Check answer Information
Welding Procedure paced learning from the answer sheet 1.1-1
Specification and/or Read key 1.1-1
client specifications. Lecture information Answer Self- Task sheet 1.1-1 1 hour
Sheet1.1-1 Check 1.1-1 Apply
Watching video Performance Performance
clips Video tutorial Task sheet criteria checklist criteria checklist
1.1-1
Safety procedure and Modular self- Read Answer self- Check answer information
requirements paced learning information check 1.1-2 from the Answer sheet 1.1-2
Sheet 1.1-2 key 1.1-2
Perform Task sheet 1.1-2
Lecture
safety Use performance Performance
procedure criteria checklist
criteria checklist
Defects and Repaired Modular self- Read Answer self- Check answer information
paced learning information check 1.1-3 from the answer sheet 1.1-3
sheet 1.1-3 key 1.1-3
Check weld in Task sheet 1.1-3
Lecture
Visual for Use performance Performance
defects criteria checklist
criteria checklist
Codes and Standard Modular self- Read Answer self- Check answer information
paced learning information check 1.1-4 from the answer sheet 1.1-4
sheet 1.1-4 key 1.1-4
Check weld Task sheet 1.1-4
Lecture
Website visual if Use performance
Internet information acceptable criteria checklist
Performance
criteria checklist
LO: 2
Check answer Information
Modular self- Answer self- form the answer sheet 1.2-1
defects and paced learning Read check 1.2-1 key 1.2-1 Task sheet 1.2-1
discontinuities information
Lecture/video sheet 1.2-1 Task clean Apply Use performance
clip root pass performance criteria checlist
criteria checklist
Read Information
Modular self-
Welding Procedure information sheet 1.2-2
paced learning
sheet 1.2-2 Answer self- Check answer from
Specification Lecture
check 1.2-2 the answer key 1.2-2
Website
Internet
information
LO: 3
Modular self- Read information Check answer Information
paced learning sheet 1.3-1 from the answer sheet 1.3-1/
Answer self-
key 1.3-1 Task sheet
lding Procedure check 1.3-1
Watching Video tutorial 1.3-1 /
Specification Apply assessment Use
Perform weld
criteria checklist performance
subsequent/
criteria
filling passes
checklist
Defects and Modular self- Read information Answer self- Check answer Information
repaired learning/ sheet 1.4-2 check 1.4-2 from the answer sheet 1.4-2
key 1.4-2
Lecture Check defects Task sheet
and repair Use performance 1.4-2
assessment
criteria checklist Performance
criteria
checklist
Codes and Modular self- Read information Answer self – Check answer Information
Standard paced learning sheet 1.4-3 check 1.4-3/ from the answer sheet 1.4-3
Check weld key 1.4-3
visual if Task sheet
acceptable Use performance 1.4-3
criteria checklist Performance
criteria
checklist
C. ASSESSMENT PLAN
Written Test
Performance Test
Demonstration
Prepared by:
Welcome!
The unit of competency, " Weld Carbon Steel Plates And Pipes
Using Smaw , is one of the competencies of Shielded Metal Arc Welding NC
II, a course which comprises the knowledge, skills and attitudes required for
a S M A W trainee to possess.
The module ,Weld Carbon Steel Plates and Pipes Using Smaw ,
contains training materials and activities related to this unit covers skills ,
knowledge an attitudes required in Welding Carbon metal Plates and Pipes Using
Smaw process.
In this module, you are required to go through a series of learning
activities in order to complete each learning outcome. In each learning
outcome are Information Sheets, Self-Checks, Task Sheets and Job Sheets.
Follow and perform the activities on your own. If you have questions, do not
hesitate to ask for assistance from your facilitator.
Remember to:
Read information sheets and complete the self-checks. Suggested
references are included to supplement the materials provided in this module.
Perform the Task Sheets and Job Sheets until you are confident that your
outputs conform to the Performance Criteria Checklist that follows the
sheets.
Submit outputs of the Task Sheets and Job Sheets to your facilitator for
evaluation and recording in the Accomplishment Chart. Outputs shall
serve as your portfolio during the Institutional Competency Evaluation.
When you feel confident that you have had sufficient practice, ask your
trainer to evaluate you. The results of your assessment will be recorded in
your Progress Chart and Accomplishment Chart.
You must pass the Institutional Competency Evaluation for this
competency before moving to another competency. A Certificate of
Achievement will be awarded to you after passing the evaluation.
SMAW NC II
List of Competencies
Prepared by:
Romarico Mendiola Jr
Trainer
Module Content
Introduction
This unit covers the competencies required to select and use hand
and power tools to perform complex bench work operation.
LEARNING OUTCOMES:
Upon Completion of this module you MUST be able to:
Assessment Criteria:
Contents:
Assessment Criteria
Root pass is performed in accordance with WPS and/or client
specifications.
Task is performed inaccordance with company or industry
requirement and safety procedure.
Weld is visually checked for defects and repaired, as required.
Weld is visually acceptable in accordance with applicable codes
and standards
Content
Tools
Head shield/helmet Plier/tong
Ballpeen Hammer Try square
Files-half round Steel brush
Steel square 300 mm. long 300 mm.
long
Leather apron/jacket
Leather glove, long
Safety goggle, wide vision,
clear
Oxy-acetylene goggles
Chipping Hammer
Assessment Method: